IDOR in Annotations API allows unprivileged users to DELETE annotation

Editors could delete any annotation, even those they do not have read access to. The editor user cannot create or read the annotations.

Viewer-triggered race condition in Grafana Live leads to complete server crash

A race condition in Grafana Live allows authenticated users with Viewer role to trigger a server crash by sending concurrent requests that cause a fatal map access error. This results in complete service unavailability requiring restart of the Grafana server.

BAC in Snapshot API allows deletion of unauthorized dashboard snapshots

Any Editor could delete any snapshot, even if they have no access to read or write them.

Grafana plugin resources can lead to unbounded memory allocation

A request to the Grafana plugin resources endpoint can cause unbounded memory allocation by reading the entire request body into memory. An authenticated user can exploit this to trigger an out-of-memory condition, potentially causing a denial of service.

Auth Proxy IPv6 whitelist bypass

When using an IPv6 allow-list for the Auth Proxy feature, it defaults to /32 addresses. Addresses specifying a mask explicitly are not affected; to mitigate easily, add the desired mask (usually /128) to the addresses. Only auth proxy is affected; Okta, SAML, LDAP, etc are unaffected here.

Dashboard Import Overwrites ACL — Editor Privilege Escalation to Dashboard Admin

An Editor can overwrite a dashboard not owned by them to acquire admin on that specific dashboard. The user must have write access to the dashboard to escalate privilege.

Mirror-registry: quay: quay: server-side request forgery via open redirect vulnerability in web interface

A flaw was found in mirror-registry where an authenticated user can trick the system into accessing unintended internal or restricted systems by providing malicious web addresses. When the application processes these addresses, it automatically follows redirects without verifying the final destination, allowing attackers to route requests to systems they should not have access to.

dpkg-deb Infinite Loop DoS via Improper Zstd Stream Validation

It was discovered that dpkg-deb (a component of dpkg, the Debian package management system) does not properly validate the end of the data stream when uncompressing a zstd-compressed .deb archive, which may result in denial of service (infinite loop spinning the CPU).

dasdec_mkuser on the Digital Alert Systems DASDEC EAS device before 2.0-2 and the Monroe Electronics R189 One-Net EAS device before 2.0-2 generates predictable passwords, which might make it easier for attackers to obtain non-administrative access via unspecified vectors.

Claude HUD 0.0.12 Path Traversal via transcript_path

Claude HUD through 0.0.12, patched in commit 234d9aa, contains a path traversal vulnerability that allows attackers to read arbitrary files by supplying an unvalidated transcript_path value via stdin JSON. Attackers can access any file readable by the process and the file metadata is written to a persistent cache file with insufficient permissions, creating a forensic record of accessed paths that survives process exit.

Claude HUD 0.0.12 Terminal Injection via OSC 8 Hyperlinks

Claude HUD through 0.0.12, patched in commit 234d9aa, constructs OSC 8 terminal hyperlink escape sequences using raw cwd and branchUrl values without stripping control characters or encoding embedded values, allowing attackers to inject arbitrary ANSI codes into terminal sessions. Attackers can embed ESC+backslash sequences in the current working directory or branch URL to execute malicious ANSI codes including text color changes, forged prompts, and OSC 52 clipboard writes, or trigger outbound HTTP requests to attacker-controlled remotes when hyperlinks are clicked.

A vulnerability has been identified in SIMATIC HMI Comfort Outdoor Panels V15 7\" & 15\" (incl. SIPLUS variants) (All versions < V15.1 Update 6), SIMATIC HMI Comfort Outdoor Panels V16 7\" & 15\" (incl. SIPLUS variants) (All versions < V16 Update 4), SIMATIC HMI Comfort Panels V15 4\" - 22\" (incl. SIPLUS variants) (All versions < V15.1 Update 6), SIMATIC HMI Comfort Panels V16 4\" - 22\" (incl. SIPLUS variants) (All versions < V16 Update 4), SIMATIC HMI KTP Mobile Panels V15 KTP400F, KTP700, KTP700F, KTP900 and KTP900F (All versions < V15.1 Update 6), SIMATIC HMI KTP Mobile Panels V16 KTP400F, KTP700, KTP700F, KTP900 and KTP900F (All versions < V16 Update 4), SIMATIC WinCC Runtime Advanced V15 (All versions < V15.1 Update 6), SIMATIC WinCC Runtime Advanced V16 (All versions < V16 Update 4), SINAMICS GH150 (All versions), SINAMICS GL150 (with option X30) (All versions), SINAMICS GM150 (with option X30) (All versions), SINAMICS SH150 (All versions), SINAMICS SL150 (All versions), SINAMICS SM120 (All versions), SINAMICS SM150 (All versions), SINAMICS SM150i (All versions). SmartVNC has an out-of-bounds memory access vulnerability in the device layout handler, represented by a binary data stream on client side, which can potentially result in code execution.

Claude HUD 0.0.12 Arbitrary Command Execution via COMSPEC Environment Variable

Claude HUD through 0.0.12, patched in commit 234d9aa, contains a command injection vulnerability that allows local attackers to execute arbitrary commands by manipulating the COMSPEC environment variable. Attackers can set COMSPEC to an arbitrary binary path before claude-hud performs its version check, causing execFile() to execute the attacker-supplied executable with cmd.exe arguments, resulting in arbitrary code execution on Windows systems.

A vulnerability has been identified in SIMATIC HMI Comfort Outdoor Panels V15 7\" & 15\" (incl. SIPLUS variants) (All versions < V15.1 Update 6), SIMATIC HMI Comfort Outdoor Panels V16 7\" & 15\" (incl. SIPLUS variants) (All versions < V16 Update 4), SIMATIC HMI Comfort Panels V15 4\" - 22\" (incl. SIPLUS variants) (All versions < V15.1 Update 6), SIMATIC HMI Comfort Panels V16 4\" - 22\" (incl. SIPLUS variants) (All versions < V16 Update 4), SIMATIC HMI KTP Mobile Panels V15 KTP400F, KTP700, KTP700F, KTP900 and KTP900F (All versions < V15.1 Update 6), SIMATIC HMI KTP Mobile Panels V16 KTP400F, KTP700, KTP700F, KTP900 and KTP900F (All versions < V16 Update 4), SIMATIC WinCC Runtime Advanced V15 (All versions < V15.1 Update 6), SIMATIC WinCC Runtime Advanced V16 (All versions < V16 Update 4), SINAMICS GH150 (All versions), SINAMICS GL150 (with option X30) (All versions), SINAMICS GM150 (with option X30) (All versions), SINAMICS SH150 (All versions), SINAMICS SL150 (All versions), SINAMICS SM120 (All versions), SINAMICS SM150 (All versions), SINAMICS SM150i (All versions). A remote attacker could send specially crafted packets to SmartVNC device layout handler on client side, which could influence the amount of resources consumed and result in a Denial-of-Service (infinite loop) condition.

Local File Inclusion via downloadAttachment Path Parameter in Asseco SEE Live 2.0

Local File Inclusion in Contact Plan, E-Mail, SMS and Fax components in Asseco SEE Live 2.0 allows remote authenticated users to access files on the host via "path" parameter in the downloadAttachment and downloadAttachmentFromPath API calls.

A vulnerability has been identified in SIMATIC HMI Comfort Outdoor Panels V15 7\" & 15\" (incl. SIPLUS variants) (All versions < V15.1 Update 6), SIMATIC HMI Comfort Outdoor Panels V16 7\" & 15\" (incl. SIPLUS variants) (All versions < V16 Update 4), SIMATIC HMI Comfort Panels V15 4\" - 22\" (incl. SIPLUS variants) (All versions < V15.1 Update 6), SIMATIC HMI Comfort Panels V16 4\" - 22\" (incl. SIPLUS variants) (All versions < V16 Update 4), SIMATIC HMI KTP Mobile Panels V15 KTP400F, KTP700, KTP700F, KTP900 and KTP900F (All versions < V15.1 Update 6), SIMATIC HMI KTP Mobile Panels V16 KTP400F, KTP700, KTP700F, KTP900 and KTP900F (All versions < V16 Update 4), SIMATIC WinCC Runtime Advanced V15 (All versions < V15.1 Update 6), SIMATIC WinCC Runtime Advanced V16 (All versions < V16 Update 4), SINAMICS GH150 (All versions), SINAMICS GL150 (with option X30) (All versions), SINAMICS GM150 (with option X30) (All versions), SINAMICS SH150 (All versions), SINAMICS SL150 (All versions), SINAMICS SM120 (All versions), SINAMICS SM150 (All versions), SINAMICS SM150i (All versions). SmartVNC has a heap allocation leak vulnerability in the device layout handler on client side, which could result in a Denial-of-Service condition.

Cross‑Site WebSocket Hijacking in Garmin WDU Firmware

The locally served web site on the Garmin WDU (v1 1.4.6 and v2 5.0) allows a cross-site origin WebSocket hijacking attack. Among other uses, the WDU utilizes WebSockets to control settings, including administrative settings. This allows a network attacker to take full control of a WDU. To initiate an exploit of this vulnerability, the victim must (1) be utilizing a web browser on a multihomed host that has local interfaces on the Garmin Marine Network as well as another network, and (2) access a malicious third party website created by the attacker.

Local XSS in Garmin WDU Allows Full Admin Access

The locally served web site on the Garmin WDU (v1 1.4.6 and v2 5.0) allows a reflected cross site scripting (XSS) attack. This allows an attacker on the local network segment to execute arbitrary JavaScript code within the context of the WDU webpage. Full administrator level access to the device is possible. To initiate an exploit of this vulnerability, the victim must execute two actions: (1) view a specific URL served by the WDU, and (2) click an element on the rendered page.

A vulnerability has been identified in SIMATIC HMI Basic Panels 2nd Generation (incl. SIPLUS variants) (All versions < V16), SIMATIC HMI Comfort Panels (incl. SIPLUS variants) (All versions <= V16), SIMATIC HMI Mobile Panels (All versions <= V16), SIMATIC HMI Unified Comfort Panels (All versions <= V16). Affected devices insufficiently block excessive authentication attempts. This could allow a remote attacker to discover user passwords and obtain access to the Sm@rt Server via a brute-force attack.

In isSameApp of NotificationManagerService.java, there is a possible persistent dos due to resource exhaustion. This could lead to local denial of service with no additional execution privileges needed. User interaction is not needed for exploitation.