| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Failed login response could be different depending on whether the username was local or central. |
| Icinga Reporting is the central component for reporting related functionality in the monitoring web frontend and framework Icinga Web 2. A vulnerability present in versions 0.10.0 through 1.0.2 allows to set up a template that allows to embed arbitrary Javascript. This enables the attacker to act on behalf of the user, if the template is being previewed; and act on behalf of the headless browser, if a report using the template is printed to PDF. This issue has been resolved in version 1.0.3 of Icinga Reporting. As a workaround, review all templates and remove suspicious settings. |
| Improper limitation of pathname in Circuit Provisioning and File Import applications allows modification and uploading of files |
| An authenticated user can modify application state data. |
| In the Linux kernel, the following vulnerability has been resolved:
sparc: fix accurate exception reporting in copy_{from_to}_user for UltraSPARC
The referenced commit introduced exception handlers on user-space memory
references in copy_from_user and copy_to_user. These handlers return from
the respective function and calculate the remaining bytes left to copy
using the current register contents. This commit fixes a couple of bad
calculations. This will fix the return value of copy_from_user and
copy_to_user in the faulting case. The behaviour of memcpy stays unchanged. |
| Uncontrolled search path for some ACAT software maintained by Intel(R) for Windows before version 3.11.0 may allow an authenticated user to potentially enable escalation of privilege via local access. |
| A vulnerability has been found in BossSoft CRM 6.0 and classified as critical. Affected by this vulnerability is an unknown functionality of the file /crm/module/HNDCBas_customPrmSearchDtl.jsp. The manipulation of the argument cstid leads to sql injection. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. |
| Multer is a node.js middleware for handling `multipart/form-data`. Versions prior to 2.0.0 are vulnerable to a resource exhaustion and memory leak issue due to improper stream handling. When the HTTP request stream emits an error, the internal `busboy` stream is not closed, violating Node.js stream safety guidance. This leads to unclosed streams accumulating over time, consuming memory and file descriptors. Under sustained or repeated failure conditions, this can result in denial of service, requiring manual server restarts to recover. All users of Multer handling file uploads are potentially impacted. Users should upgrade to 2.0.0 to receive a patch. No known workarounds are available. |
| In the Linux kernel, the following vulnerability has been resolved:
net: usb: asix: hold PM usage ref to avoid PM/MDIO + RTNL deadlock
Prevent USB runtime PM (autosuspend) for AX88772* in bind.
usbnet enables runtime PM (autosuspend) by default, so disabling it via
the usb_driver flag is ineffective. On AX88772B, autosuspend shows no
measurable power saving with current driver (no link partner, admin
up/down). The ~0.453 W -> ~0.248 W drop on v6.1 comes from phylib powering
the PHY off on admin-down, not from USB autosuspend.
The real hazard is that with runtime PM enabled, ndo_open() (under RTNL)
may synchronously trigger autoresume (usb_autopm_get_interface()) into
asix_resume() while the USB PM lock is held. Resume paths then invoke
phylink/phylib and MDIO, which also expect RTNL, leading to possible
deadlocks or PM lock vs MDIO wake issues.
To avoid this, keep the device runtime-PM active by taking a usage
reference in ax88772_bind() and dropping it in unbind(). A non-zero PM
usage count blocks runtime suspend regardless of userspace policy
(.../power/control - pm_runtime_allow/forbid), making this approach
robust against sysfs overrides.
Holding a runtime-PM usage ref does not affect system-wide suspend;
system sleep/resume callbacks continue to run as before. |
| Incorrect authentication vulnerability in ParkingDoor. Through this vulnerability it is possible to operate the device without the access being logged in the application and even if the access permissions have been revoked. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: host: max3421-hcd: Fix error pointer dereference in probe cleanup
The kthread_run() function returns error pointers so the
max3421_hcd->spi_thread pointer can be either error pointers or NULL.
Check for both before dereferencing it. |
| In the Linux kernel, the following vulnerability has been resolved:
remoteproc: qcom: pas: Shutdown lite ADSP DTB on X1E
The ADSP firmware on X1E has separate firmware binaries for the main
firmware and the DTB. The same applies for the "lite" firmware loaded by
the boot firmware.
When preparing to load the new ADSP firmware we shutdown the lite_pas_id
for the main firmware, but we don't shutdown the corresponding lite pas_id
for the DTB. The fact that we're leaving it "running" forever becomes
obvious if you try to reuse (or just access) the memory region used by the
"lite" firmware: The &adsp_boot_mem is accessible, but accessing the
&adsp_boot_dtb_mem results in a crash.
We don't support reusing the memory regions currently, but nevertheless we
should not keep part of the lite firmware running. Fix this by adding the
lite_dtb_pas_id and shutting it down as well.
We don't have a way to detect if the lite firmware is actually running yet,
so ignore the return status of qcom_scm_pas_shutdown() for now. This was
already the case before, the assignment to "ret" is not used anywhere. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/vmwgfx: Fix a null-ptr access in the cursor snooper
Check that the resource which is converted to a surface exists before
trying to use the cursor snooper on it.
vmw_cmd_res_check allows explicit invalid (SVGA3D_INVALID_ID) identifiers
because some svga commands accept SVGA3D_INVALID_ID to mean "no surface",
unfortunately functions that accept the actual surfaces as objects might
(and in case of the cursor snooper, do not) be able to handle null
objects. Make sure that we validate not only the identifier (via the
vmw_cmd_res_check) but also check that the actual resource exists before
trying to do something with it.
Fixes unchecked null-ptr reference in the snooping code. |
| A vulnerability was found in RefindPlusRepo RefindPlus 0.14.2.AB. It has been classified as problematic. This affects the function InternalApfsTranslateBlock of the file Library/RP_ApfsLib/RP_ApfsIo.c. The manipulation leads to null pointer dereference. It is possible to launch the attack on the local host. The patch is named 4d35125ca689a255647e9033dd60c257d26df7cb. It is recommended to apply a patch to fix this issue. |
| A vulnerability was found in RefindPlusRepo RefindPlus 0.14.2.AB and classified as problematic. Affected by this issue is the function GetDebugLogFile of the file Library/MemLogLib/BootLog.c. The manipulation leads to null pointer dereference. Attacking locally is a requirement. The patch is identified as d2143a1e2deefddd9b105fb7160763c4f8d47ea2. It is recommended to apply a patch to fix this issue. |
| Missing Authorization vulnerability in CreativeMotion Titan Anti-spam & Security allows Exploiting Incorrectly Configured Access Control Security Levels.This issue affects Titan Anti-spam & Security: from n/a through 7.3.6. |
| Cross-Site Request Forgery (CSRF) vulnerability in Martin Gibson WP GoToWebinar allows Cross-Site Scripting (XSS).This issue affects WP GoToWebinar: from n/a through 15.7. |
| Pinecone is an experimental overlay routing protocol suite which is the foundation of the current P2P Matrix demos. The Pinecone Simulator (pineconesim) included in Pinecone up to commit ea4c337 is vulnerable to stored cross-site scripting. The payload storage is not permanent and will be wiped when restarting pineconesim. |
| A security vulnerability has been detected in deco-cx apps up to 0.120.1. Affected by this vulnerability is the function AnalyticsScript of the file website/loaders/analyticsScript.ts of the component Parameter Handler. Such manipulation of the argument url leads to server-side request forgery. The attack can be executed remotely. The exploit has been disclosed publicly and may be used. Upgrading to version 0.120.2 addresses this issue. It is suggested to upgrade the affected component. |
| Lektor before 3.3.11 does not sanitize DB path traversal. Thus, shell commands might be executed via a file that is added to the templates directory, if the victim's web browser accesses an untrusted website that uses JavaScript to send requests to localhost port 5000, and the web browser is running on the same machine as the "lektor server" command. |
