| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Due to directory traversal vulnerability, an authorized attacker could gain access to some critical information by using RFC enabled function module. Upon successful exploitation, they could read files from any managed system connected to SAP Solution Manager, leading to high impact on confidentiality. There is no impact on integrity or availability. |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: fix use-after-free read in ext4_find_extent for bigalloc + inline
Syzbot found the following issue:
loop0: detected capacity change from 0 to 2048
EXT4-fs (loop0): mounted filesystem 00000000-0000-0000-0000-000000000000 without journal. Quota mode: none.
==================================================================
BUG: KASAN: use-after-free in ext4_ext_binsearch_idx fs/ext4/extents.c:768 [inline]
BUG: KASAN: use-after-free in ext4_find_extent+0x76e/0xd90 fs/ext4/extents.c:931
Read of size 4 at addr ffff888073644750 by task syz-executor420/5067
CPU: 0 PID: 5067 Comm: syz-executor420 Not tainted 6.2.0-rc1-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/26/2022
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0x1b1/0x290 lib/dump_stack.c:106
print_address_description+0x74/0x340 mm/kasan/report.c:306
print_report+0x107/0x1f0 mm/kasan/report.c:417
kasan_report+0xcd/0x100 mm/kasan/report.c:517
ext4_ext_binsearch_idx fs/ext4/extents.c:768 [inline]
ext4_find_extent+0x76e/0xd90 fs/ext4/extents.c:931
ext4_clu_mapped+0x117/0x970 fs/ext4/extents.c:5809
ext4_insert_delayed_block fs/ext4/inode.c:1696 [inline]
ext4_da_map_blocks fs/ext4/inode.c:1806 [inline]
ext4_da_get_block_prep+0x9e8/0x13c0 fs/ext4/inode.c:1870
ext4_block_write_begin+0x6a8/0x2290 fs/ext4/inode.c:1098
ext4_da_write_begin+0x539/0x760 fs/ext4/inode.c:3082
generic_perform_write+0x2e4/0x5e0 mm/filemap.c:3772
ext4_buffered_write_iter+0x122/0x3a0 fs/ext4/file.c:285
ext4_file_write_iter+0x1d0/0x18f0
call_write_iter include/linux/fs.h:2186 [inline]
new_sync_write fs/read_write.c:491 [inline]
vfs_write+0x7dc/0xc50 fs/read_write.c:584
ksys_write+0x177/0x2a0 fs/read_write.c:637
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x3d/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
RIP: 0033:0x7f4b7a9737b9
RSP: 002b:00007ffc5cac3668 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f4b7a9737b9
RDX: 00000000175d9003 RSI: 0000000020000200 RDI: 0000000000000004
RBP: 00007f4b7a933050 R08: 0000000000000000 R09: 0000000000000000
R10: 000000000000079f R11: 0000000000000246 R12: 00007f4b7a9330e0
R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
</TASK>
Above issue is happens when enable bigalloc and inline data feature. As
commit 131294c35ed6 fixed delayed allocation bug in ext4_clu_mapped for
bigalloc + inline. But it only resolved issue when has inline data, if
inline data has been converted to extent(ext4_da_convert_inline_data_to_extent)
before writepages, there is no EXT4_STATE_MAY_INLINE_DATA flag. However
i_data is still store inline data in this scene. Then will trigger UAF
when find extent.
To resolve above issue, there is need to add judge "ext4_has_inline_data(inode)"
in ext4_clu_mapped(). |
| The HttpAuth plugin in pGina.Fork through 3.9.9.12 allows authentication bypass when an adversary controls DNS resolution for pginaloginserver. |
| In BlueWave Checkmate before 2.1, an authenticated regular user can access sensitive application secrets via the /api/v1/settings endpoint. |
| In the Linux kernel, the following vulnerability has been resolved:
sunrpc: fix null pointer dereference on zero-length checksum
In xdr_stream_decode_opaque_auth(), zero-length checksum.len causes
checksum.data to be set to NULL. This triggers a NPD when accessing
checksum.data in gss_krb5_verify_mic_v2(). This patch ensures that
the value of checksum.len is not less than XDR_UNIT. |
| Uncontrolled search path for some ACAT software maintained by Intel(R) for Windows before version 3.11.0 may allow an authenticated user to potentially enable escalation of privilege via local access. |
| In the Linux kernel, the following vulnerability has been resolved:
sparc: fix accurate exception reporting in copy_{from_to}_user for UltraSPARC
The referenced commit introduced exception handlers on user-space memory
references in copy_from_user and copy_to_user. These handlers return from
the respective function and calculate the remaining bytes left to copy
using the current register contents. This commit fixes a couple of bad
calculations. This will fix the return value of copy_from_user and
copy_to_user in the faulting case. The behaviour of memcpy stays unchanged. |
| Northern.tech Mender Enterprise before 3.6.4 and 3.7.x before 3.7.4 has Weak Authentication. |
| Sequence of processor instructions leads to unexpected behavior in the Intel(R) DSA V1.0 for some Intel(R) Xeon(R) Processors may allow an authenticated user to potentially enable denial of service via local access. |
| Password guessing limits could be bypassed when using LDAP authentication. |
| Failed login response could be different depending on whether the username was local or central. |
| Icinga Reporting is the central component for reporting related functionality in the monitoring web frontend and framework Icinga Web 2. A vulnerability present in versions 0.10.0 through 1.0.2 allows to set up a template that allows to embed arbitrary Javascript. This enables the attacker to act on behalf of the user, if the template is being previewed; and act on behalf of the headless browser, if a report using the template is printed to PDF. This issue has been resolved in version 1.0.3 of Icinga Reporting. As a workaround, review all templates and remove suspicious settings. |
| A vulnerability was found in PX4-Autopilot 1.12.3. It has been classified as problematic. This affects the function MavlinkReceiver::handle_message_trajectory_representation_waypoints of the file mavlink_receiver.cpp of the component TRAJECTORY_REPRESENTATION_WAYPOINTS Message Handler. The manipulation leads to stack-based buffer overflow. Local access is required to approach this attack. The exploit has been disclosed to the public and may be used. |
| Improper limitation of pathname in Circuit Provisioning and File Import applications allows modification and uploading of files |
| An authenticated user can modify application state data. |
| A security vulnerability was identified in Obsidian Scheduler's REST API 5.0.0 thru 6.3.0. If an account is locked out due to not enrolling in MFA (e.g. after the 7-day enforcement window), the REST API still allows the use of Basic Authentication to authenticate and perform administrative actions. In particular, the default admin account was found to be locked out via the web interface but still usable through the REST API. This allowed creation of a new privileged user, bypassing MFA protections. This undermines the intended security posture of MFA enforcement. |
| A vulnerability has been found in BossSoft CRM 6.0 and classified as critical. Affected by this vulnerability is an unknown functionality of the file /crm/module/HNDCBas_customPrmSearchDtl.jsp. The manipulation of the argument cstid leads to sql injection. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. |
| Multer is a node.js middleware for handling `multipart/form-data`. Versions prior to 2.0.0 are vulnerable to a resource exhaustion and memory leak issue due to improper stream handling. When the HTTP request stream emits an error, the internal `busboy` stream is not closed, violating Node.js stream safety guidance. This leads to unclosed streams accumulating over time, consuming memory and file descriptors. Under sustained or repeated failure conditions, this can result in denial of service, requiring manual server restarts to recover. All users of Multer handling file uploads are potentially impacted. Users should upgrade to 2.0.0 to receive a patch. No known workarounds are available. |
| In the Linux kernel, the following vulnerability has been resolved:
net: usb: asix: hold PM usage ref to avoid PM/MDIO + RTNL deadlock
Prevent USB runtime PM (autosuspend) for AX88772* in bind.
usbnet enables runtime PM (autosuspend) by default, so disabling it via
the usb_driver flag is ineffective. On AX88772B, autosuspend shows no
measurable power saving with current driver (no link partner, admin
up/down). The ~0.453 W -> ~0.248 W drop on v6.1 comes from phylib powering
the PHY off on admin-down, not from USB autosuspend.
The real hazard is that with runtime PM enabled, ndo_open() (under RTNL)
may synchronously trigger autoresume (usb_autopm_get_interface()) into
asix_resume() while the USB PM lock is held. Resume paths then invoke
phylink/phylib and MDIO, which also expect RTNL, leading to possible
deadlocks or PM lock vs MDIO wake issues.
To avoid this, keep the device runtime-PM active by taking a usage
reference in ax88772_bind() and dropping it in unbind(). A non-zero PM
usage count blocks runtime suspend regardless of userspace policy
(.../power/control - pm_runtime_allow/forbid), making this approach
robust against sysfs overrides.
Holding a runtime-PM usage ref does not affect system-wide suspend;
system sleep/resume callbacks continue to run as before. |
| Openindiana, kernel SunOS 5.11 has a denial of service vulnerability. For the processing of TCP packets with RST or SYN flag set, Openindiana has a wide acceptable range of sequence numbers. It does not require the sequence number to exactly match the next expected sequence value, just to be within the current receive window, which violates RFC5961. This flaw allows attackers to send multiple random TCP RST/SYN packets to hit the acceptable range of sequence numbers, thereby interrupting normal connections and causing a denial of service attack. |
