| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| PinchTab is a standalone HTTP server that gives AI agents direct control over a Chrome browser. PinchTab v0.8.3 contains a server-side request forgery issue in the optional scheduler's webhook delivery path. When a task is submitted to `POST /tasks` with a user-controlled `callbackUrl`, the v0.8.3 scheduler sends an outbound HTTP `POST` to that URL when the task reaches a terminal state. In that release, the webhook path validated only the URL scheme and did not reject loopback, private, link-local, or other non-public destinations. Because the v0.8.3 implementation also used the default HTTP client behavior, redirects were followed and the destination was not pinned to validated IPs. This allowed blind SSRF from the PinchTab server to attacker-chosen HTTP(S) targets reachable from the server. This issue is narrower than a general unauthenticated internet-facing SSRF. The scheduler is optional and off by default, and in token-protected deployments the attacker must already be able to submit tasks using the server's master API token. In PinchTab's intended deployment model, that token represents administrative control rather than a low-privilege role. Tokenless deployments lower the barrier further, but that is a separate insecure configuration state rather than impact created by the webhook bug itself. PinchTab's default deployment model is local-first and user-controlled, with loopback bind and token-based access in the recommended setup. That lowers practical risk in default use, even though it does not remove the underlying webhook issue when the scheduler is enabled and reachable. This was addressed in v0.8.4 by validating callback targets before dispatch, rejecting non-public IP ranges, pinning delivery to validated IPs, disabling redirect following, and validating `callbackUrl` during task submission. |
| A vulnerability in Grafana Tempo exposes the S3 SSE-C encryption key in plaintext through the /status/config endpoint, potentially allowing unauthorized users to obtain the key used to encrypt trace data stored in S3.
Thanks to william_goodfellow for reporting this vulnerability. |
| Ruckus Access Point products contain an arbitrary file read vulnerability in the command-line interface that allows authenticated remote attackers with administrative privileges to read arbitrary files from the underlying filesystem. Attackers can exploit this vulnerability to access sensitive information including configuration files, credentials, and system data stored on the device. |
| Ruckus Unleashed contains a remote code execution vulnerability in the web-based management interface that allows authenticated remote attackers to execute arbitrary code on the system when gateway mode is enabled. Attackers can exploit this vulnerability by sending specially crafted requests through the management interface to achieve arbitrary code execution on affected systems. |
| In the Drupal 7 Internationalization (i18n) module, the i18n_node submodule allows a user with both "Translate content" and "Administer content translations" permissions to view and attach unpublished nodes via the translation UI and its autocomplete widget. This bypasses intended access controls and discloses unpublished node titles and IDs.
Exploit affects versions 7.x-1.0 up to and including 7.x-1.35. |
| A flaw was found in libssh where it can attempt to open arbitrary files during configuration parsing. A local attacker can exploit this by providing a malicious configuration file or when the system is misconfigured. This vulnerability could lead to a Denial of Service (DoS) by causing the system to try and access dangerous files, such as block devices or large system files, which can disrupt normal operations. |
| The API function `ssh_get_hexa()` is vulnerable, when 0-lenght
input is provided to this function. This function is used internally
in `ssh_get_fingerprint_hash()` and `ssh_print_hexa()` (deprecated),
which is vulnerable to the same input (length is provided by the
calling application).
The function is also used internally in the gssapi code for logging
the OIDs received by the server during GSSAPI authentication. This
could be triggered remotely, when the server allows GSSAPI authentication
and logging verbosity is set at least to SSH_LOG_PACKET (3). This
could cause self-DoS of the per-connection daemon process. |
| A flaw was found in libssh in which a malicious SFTP (SSH File Transfer Protocol) server can exploit this by sending a malformed 'longname' field within an `SSH_FXP_NAME` message during a file listing operation. This missing null check can lead to reading beyond allocated memory on the heap. This can cause unexpected behavior or lead to a denial of service (DoS) due to application crashes. |
| The Elementor Website Builder plugin for WordPress is vulnerable to Incorrect Authorization to Sensitive Information Exposure in all versions up to, and including, 3.35.7. This is due to a logic error in the is_allowed_to_read_template() function permission check that treats non-published templates as readable without verifying edit capabilities. This makes it possible for authenticated attackers, with contributor-level access and above, to read private or draft Elementor template content via the 'template_id' supplied to the 'get_template_data' action of the 'elementor_ajax' endpoint. |
| Information disclosure in the file URI processing of File (Field) Paths in Drupal File (Field) Paths 7.x prior to 7.1.3 on Drupal 7.x allows authenticated users to disclose other users’ private files via filename‑collision uploads. This can cause hook_node_insert() consumers (for example, email attachment modules) to receive the wrong file URI, bypassing normal access controls on private files. |
| The FloristPress for Woo – Customize your eCommerce store for your Florist plugin for WordPress is vulnerable to Reflected Cross-Site Scripting via the 'noresults' parameter in all versions up to, and including, 7.8.2 due to insufficient input sanitization and output escaping on the user supplied 'noresults' parameter. This makes it possible for unauthenticated attackers to inject arbitrary web scripts in pages that execute if they can successfully trick a user into performing an action such as clicking on a link. |
| A vulnerability has been discovered in Grafana OSS where an authorization bypass in the provisioning contact points API allows users with Editor role to modify protected webhook URLs without the required alert.notifications.receivers.protected:write permission. |
| A flaw was found in GIMP. Heap-buffer-overflow vulnerability exists in the fread_pascal_string function when processing a specially crafted PSD (Photoshop Document) file. This occurs because the buffer allocated for a Pascal string is not properly null-terminated, leading to an out-of-bounds read when strlen() is subsequently called. Successfully exploiting this vulnerability can cause the application to crash, resulting in an application level Denial of Service. |
| EVerest is an EV charging software stack. Prior to version 2026.02.0, an off-by-one check in IsoMux certificate filename handling causes a stack-based buffer overflow when a filename length equals `MAX_FILE_NAME_LENGTH` (100). A crafted filename in the certificate directory can overflow `file_names[idx]`, corrupting stack state and enabling potential code execution. Version 2026.02.0 contains a patch. |
| A flaw was found in GIMP's PSP (Paint Shop Pro) file parser. A remote attacker could exploit an integer overflow vulnerability in the read_creator_block() function by providing a specially crafted PSP image file. This vulnerability occurs when a 32-bit length value from the file is used for memory allocation without proper validation, leading to a heap overflow and an out-of-bounds write. Successful exploitation could result in an application level denial of service. |
| EVerest is an EV charging software stack. Prior to version 2026.02.0, `HomeplugMessage::setup_payload` trusts `len` after an `assert`; in release builds the check is removed, so oversized SLAC payloads are `memcpy`'d into a ~1497-byte stack buffer, corrupting the stack and enabling remote code execution from network-provided frames. Version 2026.02.0 contains a patch. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: fix NULL deref in mesh_matches_local()
mesh_matches_local() unconditionally dereferences ie->mesh_config to
compare mesh configuration parameters. When called from
mesh_rx_csa_frame(), the parsed action-frame elements may not contain a
Mesh Configuration IE, leaving ie->mesh_config NULL and triggering a
kernel NULL pointer dereference.
The other two callers are already safe:
- ieee80211_mesh_rx_bcn_presp() checks !elems->mesh_config before
calling mesh_matches_local()
- mesh_plink_get_event() is only reached through
mesh_process_plink_frame(), which checks !elems->mesh_config, too
mesh_rx_csa_frame() is the only caller that passes raw parsed elements
to mesh_matches_local() without guarding mesh_config. An adjacent
attacker can exploit this by sending a crafted CSA action frame that
includes a valid Mesh ID IE but omits the Mesh Configuration IE,
crashing the kernel.
The captured crash log:
Oops: general protection fault, probably for non-canonical address ...
KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
Workqueue: events_unbound cfg80211_wiphy_work
[...]
Call Trace:
<TASK>
? __pfx_mesh_matches_local (net/mac80211/mesh.c:65)
ieee80211_mesh_rx_queued_mgmt (net/mac80211/mesh.c:1686)
[...]
ieee80211_iface_work (net/mac80211/iface.c:1754 net/mac80211/iface.c:1802)
[...]
cfg80211_wiphy_work (net/wireless/core.c:426)
process_one_work (net/kernel/workqueue.c:3280)
? assign_work (net/kernel/workqueue.c:1219)
worker_thread (net/kernel/workqueue.c:3352)
? __pfx_worker_thread (net/kernel/workqueue.c:3385)
kthread (net/kernel/kthread.c:436)
[...]
ret_from_fork_asm (net/arch/x86/entry/entry_64.S:255)
</TASK>
This patch adds a NULL check for ie->mesh_config at the top of
mesh_matches_local() to return false early when the Mesh Configuration
IE is absent. |
| In the Linux kernel, the following vulnerability has been resolved:
nfnetlink_osf: validate individual option lengths in fingerprints
nfnl_osf_add_callback() validates opt_num bounds and string
NUL-termination but does not check individual option length fields.
A zero-length option causes nf_osf_match_one() to enter the option
matching loop even when foptsize sums to zero, which matches packets
with no TCP options where ctx->optp is NULL:
Oops: general protection fault
KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
RIP: 0010:nf_osf_match_one (net/netfilter/nfnetlink_osf.c:98)
Call Trace:
nf_osf_match (net/netfilter/nfnetlink_osf.c:227)
xt_osf_match_packet (net/netfilter/xt_osf.c:32)
ipt_do_table (net/ipv4/netfilter/ip_tables.c:293)
nf_hook_slow (net/netfilter/core.c:623)
ip_local_deliver (net/ipv4/ip_input.c:262)
ip_rcv (net/ipv4/ip_input.c:573)
Additionally, an MSS option (kind=2) with length < 4 causes
out-of-bounds reads when nf_osf_match_one() unconditionally accesses
optp[2] and optp[3] for MSS value extraction. While RFC 9293
section 3.2 specifies that the MSS option is always exactly 4
bytes (Kind=2, Length=4), the check uses "< 4" rather than
"!= 4" because lengths greater than 4 do not cause memory
safety issues -- the buffer is guaranteed to be at least
foptsize bytes by the ctx->optsize == foptsize check.
Reject fingerprints where any option has zero length, or where an MSS
option has length less than 4, at add time rather than trusting these
values in the packet matching hot path. |
| In the Linux kernel, the following vulnerability has been resolved:
icmp: fix NULL pointer dereference in icmp_tag_validation()
icmp_tag_validation() unconditionally dereferences the result of
rcu_dereference(inet_protos[proto]) without checking for NULL.
The inet_protos[] array is sparse -- only about 15 of 256 protocol
numbers have registered handlers. When ip_no_pmtu_disc is set to 3
(hardened PMTU mode) and the kernel receives an ICMP Fragmentation
Needed error with a quoted inner IP header containing an unregistered
protocol number, the NULL dereference causes a kernel panic in
softirq context.
Oops: general protection fault, probably for non-canonical address 0xdffffc0000000002: 0000 [#1] SMP KASAN NOPTI
KASAN: null-ptr-deref in range [0x0000000000000010-0x0000000000000017]
RIP: 0010:icmp_unreach (net/ipv4/icmp.c:1085 net/ipv4/icmp.c:1143)
Call Trace:
<IRQ>
icmp_rcv (net/ipv4/icmp.c:1527)
ip_protocol_deliver_rcu (net/ipv4/ip_input.c:207)
ip_local_deliver_finish (net/ipv4/ip_input.c:242)
ip_local_deliver (net/ipv4/ip_input.c:262)
ip_rcv (net/ipv4/ip_input.c:573)
__netif_receive_skb_one_core (net/core/dev.c:6164)
process_backlog (net/core/dev.c:6628)
handle_softirqs (kernel/softirq.c:561)
</IRQ>
Add a NULL check before accessing icmp_strict_tag_validation. If the
protocol has no registered handler, return false since it cannot
perform strict tag validation. |
| The Complianz – GDPR/CCPA Cookie Consent plugin for WordPress is vulnerable to Stored Cross-Site Scripting in all versions up to, and including, 7.4.4.2. This is due to the `revert_divs_to_summary` function replacing `”` HTML entities with literal double-quote characters (`"`) in post content without subsequent sanitization. This makes it possible for authenticated attackers, with Contributor-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses the injected page. The Classic Editor plugin is required to be installed and activated in order to exploit this vulnerability. |
