| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Shenzhen JF6000 Cloud Media Collaboration Processing Platform firmware version V1.2.0 and software version V2.0.0 build 6245 is vulnerable to Incorrect Access Control. |
| An authentication bypass vulnerability was found in Videx's CyberAudit-Web. Through the exploitation of a logic flaw, an attacker could create a valid session without any credentials. This vulnerability has been patched in versions later than 9.5 and a patch has been made available to all instances of CyberAudit-Web, including the versions that are End of Maintenance (EOM). Anyone that requires support with the resolution of this issue can contact support@videx.com for assistance. |
| A vulnerability, which was classified as critical, has been found in Softwin WMX3 3.1. This issue affects the function ImageAdd of the file /ImageAdd.ashx. The manipulation of the argument File leads to unrestricted upload. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| A vulnerability in the handling of verify_mode = CERT_REQUIRED in the wolfssl Python package (wolfssl-py) causes client certificate requirements to not be fully enforced.
Because the WOLFSSL_VERIFY_FAIL_IF_NO_PEER_CERT flag was not included, the behavior effectively matched CERT_OPTIONAL: a peer certificate was verified if presented, but connections were incorrectly authenticated when no client certificate was provided.
This results in improper authentication, allowing attackers to bypass mutual TLS (mTLS) client authentication by omitting a client certificate during the TLS handshake.
The issue affects versions up to and including 5.8.2. |
| Improper access control in the EDECCSSA user leaf function for some Intel(R) Processors with Intel(R) SGX may allow an authenticated user to potentially enable denial of service via local access. |
| Apollo Router Core is a configurable graph router written in Rust to run a federated supergraph using Apollo Federation 2. In versions 1.61.11 below, as well as 2.0.0-alpha.0 through 2.8.1-rc.0, a vulnerability allowed for unauthenticated queries to access data that required additional access controls. Router incorrectly handled access control directives on interface types/fields and their implementing object types/fields, applying them to interface types/fields while ignoring directives on their implementing object types/fields when all implementations had the same requirements. Apollo Router customers defining @authenticated, @requiresScopes, or @policy directives inconsistently on polymorphic types (i.e., object types that implement interface types) are impacted. This issue is fixed in versions 1.61.12 and 2.8.1. |
| Spring Cloud Config Server may not use Vault token sent by clients using a X-CONFIG-TOKEN header when making requests to Vault.
Your application may be affected by this if the following are true:
* You have Spring Vault on the classpath of your Spring Cloud Config Server and
* You are using the X-CONFIG-TOKEN header to send a Vault token to the Spring Cloud Config Server for the Config Server to use when making requests to Vault and
* You are using the default Spring Vault SessionManager implementation LifecycleAwareSessionManager or a SessionManager implementation that persists the Vault token such as SimpleSessionManager.
In this case the SessionManager persists the first token it retrieves and will continue to use that token even if client requests to the Spring Cloud Config Server include a X-CONFIG-TOKEN header with a different value.
Affected Spring Products and Versions
Spring Cloud Config:
* 2.2.1.RELEASE - 4.2.1
Mitigation
Users of affected versions should upgrade to the corresponding fixed version.
Affected version(s)Fix versionAvailability4.2.x4.2.2OSS4.1.x4.1.6OSS4.0.x4.0.10Commercial3.1.x3.1.10Commercial3.0.x4.1.6OSS2.2.x4.1.6OSS
NOTE: Spring Cloud Config 3.0.x and 2.2.x are no longer under open source or commercial support. Users of these versions are encouraged to upgrade to a supported version.
No other mitigation steps are necessary. |
| Hush Line is a free and open-source, anonymous-tip-line-as-a-service for organizations or individuals. The TOTP authentication flow has multiple issues that weakens its one-time nature. Specifically, the lack of 2FA for changing security settings allows attacker with CSRF or XSS primitives to change such settings without user interaction and credentials are required. This vulnerability has been patched in version 0.10.
|
| The JobSearch WP Job Board plugin for WordPress is vulnerable to privilege escalation in all versions up to, and including, 2.6.7. This is due to the plugin not properly verifying a users identity when verifying an email address through the user_account_activation function. This makes it possible for unauthenticated attackers to log in as any user, including site administrators if the users email is known. |
| A local privilege escalation vulnerability exists during the installation of Epic Games Store via the Microsoft Store. A low-privilege user can replace a DLL file during the installation process, which may result in unintended elevation of privileges. |
| Cross Site Request Forgery vulnerability in Dolibarr ERP & CRM v.22.0.9 allows a remote attacker to escalate privileges via the notes field in perms.php NOTE: this is disputed by a third party who indicates that exploitation can only occur if an unprivileged user knows the token of an admin user. |
| The Simpler Checkout plugin for WordPress is vulnerable to Authentication Bypass in versions 0.7.0 to 1.1.9. This is due to the plugin not properly verifying a user's identity prior to logging them in as an admin through the simplerwc_woocommerce_order_created() function. This makes it possible for unauthenticated attackers to log in as other users based on their order ID, which can be an administrator if a site admin has placed a test order. |
| OctoPrint-SpoolManager is a plugin for managing spools and all their usage metadata. In versions 1.8.0a2 and older of the testing branch and versions 1.7.7 and older of the stable branch, the APIs of the OctoPrint-SpoolManager plugin do not correctly enforce authentication or authorization checks. This issue has been patched in versions 1.8.0a3 of the testing branch and 1.7.8 of the stable branch. The impact of this vulnerability is greatly reduced when using OctoPrint version 1.11.2 and newer. |
| MinIO is a high performance object storage. Starting in RELEASE.2024-06-06T09-36-42Z and prior to
RELEASE.2025-02-28T09-55-16Z, a bug in evaluating the trust of the SSH key used in an SFTP connection to MinIO allows authentication bypass and unauthorized data access. On a MinIO server with SFTP access configured and using LDAP as an external identity provider, MinIO supports SSH key based authentication for SFTP connections when the user has the `sshPublicKey` attribute set in their LDAP server. The server trusts the client's key only when the public key is the same as the `sshPublicKey` attribute. Due to the bug, when the user has no `sshPublicKey` property in LDAP, the server ends up trusting the key allowing the client to perform any FTP operations allowed by the MinIO access policies associated with the LDAP user (or any of their groups). Three requirements must be met in order to exploit the vulnerability. First, the MinIO server must be configured to allow SFTP access and use LDAP as an external identity provider. Second, the attacker must have knowledge of an LDAP username that does not have the `sshPublicKey` property set. Third, such an LDAP username or one of their groups must also have some MinIO access policy configured. When this bug is successfully exploited, the attacker can perform any FTP operations (i.e. reading, writing, deleting and listing objects) allowed by the access policy associated with the LDAP user account (and their groups). Version 1.2.0 fixes the issue. |
| Versions of the package djoser before 2.3.0 are vulnerable to Authentication Bypass when the authenticate() function fails. This is because the system falls back to querying the database directly, granting access to users with valid credentials, and eventually bypassing custom authentication checks such as two-factor authentication, LDAP validations, or requirements from configured AUTHENTICATION_BACKENDS. |
| The mobile application (com.transsion.videocallenhancer) interface has improper permission control, which can lead to the risk of private file leakage. |
| Swissphone DiCal-RED 4009 devices allow a remote attacker to gain read access to almost the whole file system via anonymous FTP. |
| goshs is a SimpleHTTPServer written in Go. Starting in version 0.3.4 and prior to version 1.0.5, running goshs without arguments makes it possible for anyone to execute commands on the server. The function `dispatchReadPump` does not checks the option cli `-c`, thus allowing anyone to execute arbitrary command through the use of websockets. Version 1.0.5 fixes the issue. |
| Improper access control for some Intel(R) Graphics software may allow an authenticated user to potentially enable denial of service via local access. |
| The WooCommerce Smart Coupons plugin for WordPress is vulnerable to authorization bypass due to a missing capability check on the woocommerce_coupon_admin_init function in versions up to, and including, 4.6.0. This makes it possible for unauthenticated attackers to send themselves gift certificates of any value, which could be redeemed for products sold on the victim’s storefront. |
