| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A vulnerability in the Control and Provisioning of Wireless Access Points (CAPWAP) protocol processing of Cisco IOS XE Wireless Controller Software for the Catalyst 9000 Family could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. This vulnerability is due to inadequate input validation of incoming CAPWAP packets encapsulating multicast DNS (mDNS) queries. An attacker could exploit this vulnerability by connecting to a wireless network and sending a crafted mDNS query, which would flow through and be processed by the wireless controller. A successful exploit could allow the attacker to cause the affected device to crash and reload, resulting in a DoS condition. |
| A vulnerability in the CLI of Cisco IOS XE Software for Cisco Catalyst 9000 Family Switches and Cisco Catalyst 9000 Family Wireless Controllers could allow an authenticated, local attacker to elevate privileges to level 15 on an affected device. This vulnerability is due to insufficient validation of user privileges after the user executes certain CLI commands. An attacker could exploit this vulnerability by logging in to an affected device as a low-privileged user and then executing certain CLI commands. A successful exploit could allow the attacker to execute arbitrary commands with level 15 privileges on the affected device. |
| A vulnerability in the IPSec decryption routine of Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause an affected device to reload, resulting in a denial of service (DoS) condition. This vulnerability is due to buffer exhaustion that occurs while traffic on a configured IPsec tunnel is being processed. An attacker could exploit this vulnerability by sending traffic to an affected device that has a maximum transmission unit (MTU) of 1800 bytes or greater. A successful exploit could allow the attacker to cause the device to reload. To exploit this vulnerability, the attacker may need access to the trusted network where the affected device is in order to send specific packets to be processed by the device. All network devices between the attacker and the affected device must support an MTU of 1800 bytes or greater. This access requirement could limit the possibility of a successful exploit. |
| A vulnerability in the AppNav-XE feature of Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause an affected device to reload, resulting in a denial of service (DoS) condition. This vulnerability is due to the incorrect handling of certain TCP segments. An attacker could exploit this vulnerability by sending a stream of crafted TCP traffic at a high rate through an interface of an affected device. That interface would need to have AppNav interception enabled. A successful exploit could allow the attacker to cause the device to reload. |
| Multiple vulnerabilities in the Cisco IOx application hosting environment on multiple Cisco platforms could allow an attacker to inject arbitrary commands into the underlying host operating system, execute arbitrary code on the underlying host operating system, install applications without being authenticated, or conduct a cross-site scripting (XSS) attack against a user of the affected software. For more information about these vulnerabilities, see the Details section of this advisory. |
| A vulnerability in the Tool Command Language (Tcl) interpreter of Cisco IOS XE Software could allow an authenticated, local attacker to escalate from privilege level 15 to root-level privileges. This vulnerability is due to insufficient input validation of data that is passed into the Tcl interpreter. An attacker could exploit this vulnerability by loading malicious Tcl code on an affected device. A successful exploit could allow the attacker to execute arbitrary commands as root. By default, Tcl shell access requires privilege level 15. |
| Multiple vulnerabilities that affect Cisco Catalyst Digital Building Series Switches and Cisco Catalyst Micro Switches could allow an attacker to execute persistent code at boot time or to permanently prevent the device from booting, resulting in a permanent denial of service (DoS) condition. For more information about these vulnerabilities, see the Details section of this advisory. |
| A vulnerability in the web-based management interface of certain Cisco Small Business RV Series Routers could allow an authenticated, remote attacker with administrative privileges to inject arbitrary commands into the underlying operating system and execute them using root-level privileges. This vulnerability is due to insufficient validation of user-supplied input. An attacker could exploit this vulnerability by sending malicious input to a specific field in the web-based management interface of an affected device. A successful exploit could allow the attacker to execute arbitrary commands on the underlying Linux operating system as a user with root-level privileges. |
| A vulnerability in the Cisco IOS XR Software CLI could allow an authenticated, local attacker to view more information than their privileges allow. This vulnerability is due to insufficient application of restrictions during the execution of a specific command. An attacker could exploit this vulnerability by running a specific command. A successful exploit could allow the attacker to view sensitive configuration information that their privileges might not otherwise allow them to access. |
| A vulnerability in the Control and Provisioning of Wireless Access Points (CAPWAP) protocol processing of Cisco IOS XE Software for Cisco Catalyst 9000 Family Wireless Controllers could allow an unauthenticated, remote attacker to execute arbitrary code with administrative privileges or cause a denial of service (DoS) condition on an affected device. The vulnerability is due to a logic error that occurs during the validation of CAPWAP packets. An attacker could exploit this vulnerability by sending a crafted CAPWAP packet to an affected device. A successful exploit could allow the attacker to execute arbitrary code with administrative privileges or cause the affected device to crash and reload, resulting in a DoS condition. |
| Multiple vulnerabilities in the Control and Provisioning of Wireless Access Points (CAPWAP) protocol processing of Cisco IOS XE Software for Cisco Catalyst 9000 Family Wireless Controllers could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. These vulnerabilities are due to insufficient validation of CAPWAP packets. An attacker could exploit the vulnerabilities by sending a malformed CAPWAP packet to an affected device. A successful exploit could allow the attacker to cause the affected device to crash and reload, resulting in a DoS condition. |
| Multiple vulnerabilities in the Control and Provisioning of Wireless Access Points (CAPWAP) protocol processing of Cisco IOS XE Software for Cisco Catalyst 9000 Family Wireless Controllers could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. These vulnerabilities are due to insufficient validation of CAPWAP packets. An attacker could exploit the vulnerabilities by sending a malformed CAPWAP packet to an affected device. A successful exploit could allow the attacker to cause the affected device to crash and reload, resulting in a DoS condition. |
| A vulnerability in IPv6 traffic processing of Cisco IOS XE Wireless Controller Software for Cisco Catalyst 9000 Family Wireless Controllers could allow an unauthenticated, adjacent attacker to cause a Layer 2 (L2) loop in a configured VLAN, resulting in a denial of service (DoS) condition for that VLAN. The vulnerability is due to a logic error when processing specific link-local IPv6 traffic. An attacker could exploit this vulnerability by sending a crafted IPv6 packet that would flow inbound through the wired interface of an affected device. A successful exploit could allow the attacker to cause traffic drops in the affected VLAN, thus triggering the DoS condition. |
| A vulnerability in the DHCP version 4 (DHCPv4) server feature of Cisco IOS XR Software could allow an unauthenticated, remote attacker to trigger a crash of the dhcpd process, resulting in a denial of service (DoS) condition. This vulnerability exists because certain DHCPv4 messages are improperly validated when they are processed by an affected device. An attacker could exploit this vulnerability by sending a malformed DHCPv4 message to an affected device. A successful exploit could allow the attacker to cause a NULL pointer dereference, resulting in a crash of the dhcpd process. While the dhcpd process is restarting, which may take up to approximately two minutes, DHCPv4 server services are unavailable on the affected device. This could temporarily prevent network access to clients that join the network during that time period. Note: Only the dhcpd process crashes and eventually restarts automatically. The router does not reload. |
| A vulnerability in the CLI of Cisco IOS XE SD-WAN Software and Cisco IOS XE Software could allow an authenticated, local attacker to execute arbitrary commands with elevated privileges on an affected device. This vulnerability is due to insufficient validation of arguments passed to certain CLI commands. An attacker could exploit this vulnerability by including malicious input in the argument of an affected command. A successful exploit could allow the attacker to execute arbitrary commands with elevated privileges on the underlying operating system. An attacker would need valid user credentials to exploit this vulnerability. |
| Multiple vulnerabilities in the CLI of Cisco IOS XR Software could allow an authenticated, local attacker with a low-privileged account to elevate privileges on an affected device. For more information about these vulnerabilities, see the Details section of this advisory. |
| A vulnerability in the vDaemon process in Cisco IOS XE SD-WAN Software could allow an unauthenticated, remote attacker to cause a buffer overflow on an affected device. This vulnerability is due to insufficient bounds checking when an affected device processes traffic. An attacker could exploit this vulnerability by sending crafted traffic to the device. A successful exploit could allow the attacker to cause a buffer overflow and possibly execute arbitrary commands with root-level privileges, or cause the device to reload, which could result in a denial of service condition. |
| A vulnerability in the CLI of Cisco IOS XE SD-WAN Software could allow an authenticated, local attacker to inject arbitrary commands to be executed with root-level privileges on the underlying operating system. This vulnerability is due to insufficient input validation on certain CLI commands. An attacker could exploit this vulnerability by authenticating to an affected device and submitting crafted input to the CLI. The attacker must be authenticated as an administrative user to execute the affected commands. A successful exploit could allow the attacker to execute commands with root-level privileges. |
| A vulnerability in the Cisco IOS XE SD-WAN Software CLI could allow an authenticated, local attacker to elevate privileges and execute arbitrary code on the underlying operating system as the root user. An attacker must be authenticated on an affected device as a PRIV15 user. This vulnerability is due to insufficient file system protection and the presence of a sensitive file in the bootflash directory on an affected device. An attacker could exploit this vulnerability by overwriting an installer file stored in the bootflash directory with arbitrary commands that can be executed with root-level privileges. A successful exploit could allow the attacker to read and write changes to the configuration database on the affected device. |
| A vulnerability in a specific CLI command that is run on Cisco IOS XE SD-WAN Software could allow an authenticated, local attacker to overwrite arbitrary files in the configuration database of an affected device. This vulnerability is due to insufficient validation of specific CLI command parameters. An attacker could exploit this vulnerability by issuing that command with specific parameters. A successful exploit could allow the attacker to overwrite the content of the configuration database and gain root-level access to an affected device. |
