| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| The Bluetooth Low Energy (BLE) controller implementation in Espressif ESP-IDF 4.2 and earlier (for ESP32 devices) does not properly restrict the channel map field of the connection request packet on reception, allowing attackers in radio range to cause a denial of service (crash) via a crafted packet. |
| The Bluetooth Low Energy Secure Manager Protocol (SMP) implementation in Texas Instruments SimpleLink SIMPLELINK-CC2640R2-SDK through 2.2.3 allows the Diffie-Hellman check during the Secure Connection pairing to be skipped if the Link Layer encryption setup is performed earlier. An attacker in radio range can achieve arbitrary read/write access to protected GATT service data, cause a denial of service, or possibly control a device's function by establishing an encrypted session with an unauthenticated Long Term Key (LTK). |
| OpenTrace, as used in COVIDSafe through v1.0.17, TraceTogether, ABTraceTogether, and other applications on iOS and Android, allows remote attackers to conduct long-term re-identification attacks and possibly have unspecified other impact, because of how Bluetooth is used. |
| The COVIDSafe (Australia) app 1.0 and 1.1 for iOS allows a remote attacker to crash the app, and consequently interfere with COVID-19 contact tracing, via a Bluetooth advertisement containing manufacturer data that is too short. This occurs because of an erroneous OpenTrace manuData.subdata call. The ABTraceTogether (Alberta), ProteGO (Poland), and TraceTogether (Singapore) apps were also affected. |
| Improper input validation in some Intel(R) Wireless Bluetooth(R) products before version 21.110 may allow an unauthenticated user to potentially enable denial of service via adjacent access. |
| Improper buffer restriction in some Intel(R) Wireless Bluetooth(R) products before version 21.110 may allow an unauthenticated user to potentially enable escalation of privilege via adjacent access. |
| React Native Bluetooth Scan in Bluezone 1.0.0 uses six-character alphanumeric IDs, which might make it easier for remote attackers to interfere with COVID-19 contact tracing by using many IDs. NOTE: the vendor disputes the relevance of this report because the recipient of an F1 alert will know it was a false alert if contact-history comparison fails (i.e., an F0 is not actually part of the contact history obtained from the device of this recipient, or this recipient is not actually part of the contact history obtained from the device of an F0) |
| The Bluetooth Low Energy implementation in Cypress PSoC Creator BLE 4.2 component versions before 3.64 generates a random number (Pairing Random) with significantly less entropy than the specified 128 bits during BLE pairing. This is the case for both authenticated and unauthenticated pairing with both LE Secure Connections as well as LE Legacy Pairing. A predictable or brute-forceable random number allows an attacker (in radio range) to perform a MITM attack during BLE pairing. |
| An issue was discovered on Tata Sonata Smart SF Rush 1.12 devices. It has been identified that the smart band has no pairing (mode 0 Bluetooth LE security level) The data being transmitted over the air is not encrypted. Adding to this, the data being sent to the smart band doesn't have any authentication or signature verification. Thus, any attacker can control a parameter of the device. |
| u'Use after free issue in Bluetooth transport driver when a method in the object is accessed after the object has been deleted due to improper timer handling.' in Snapdragon Auto, Snapdragon Compute, Snapdragon Consumer IOT, Snapdragon Industrial IOT, Snapdragon Mobile, Snapdragon Wearables in APQ8009W, MSM8909W, QCS605, QM215, SA6155, SA6155P, SA8155, SA8155P, SDA640, SDA670, SDA855, SDM1000, SDM640, SDM670, SDM710, SDM845, SDX50M, SDX55, SDX55M, SM6125, SM6350, SM7225, SM7250, SM7250P, SM8150, SM8150P, SM8250, SXR1120, SXR1130, SXR2130, SXR2130P |
| u'Buffer over-read issue in Bluetooth estack due to lack of check for invalid length of L2cap packet received from peer device.' in Snapdragon Auto, Snapdragon Compute, Snapdragon Connectivity, Snapdragon Consumer Electronics Connectivity, Snapdragon Consumer IOT, Snapdragon Industrial IOT, Snapdragon Mobile, Snapdragon Voice & Music, Snapdragon Wired Infrastructure and Networking in QCA6390, QCN7605, QCS404, SA415M, SA515M, SC8180X, SDX55, SM8250 |
| u'Buffer overflow while processing PDU packet in bluetooth due to lack of check of buffer length before copying into it.' in Snapdragon Auto, Snapdragon Compute, Snapdragon Connectivity, Snapdragon Consumer Electronics Connectivity, Snapdragon Consumer IOT, Snapdragon Industrial IOT, Snapdragon Mobile, Snapdragon Voice & Music, Snapdragon Wired Infrastructure and Networking in APQ8009, APQ8053, QCA6390, QCN7605, QCN7606, SA415M, SA515M, SA6155P, SA8155P, SC8180X, SDX55 |
| u'Buffer overflow while processing a crafted PDU data packet in bluetooth due to lack of check of buffer size before copying' in Snapdragon Auto, Snapdragon Compute, Snapdragon Connectivity, Snapdragon Consumer Electronics Connectivity, Snapdragon Consumer IOT, Snapdragon Industrial IOT, Snapdragon Mobile, Snapdragon Voice & Music, Snapdragon Wired Infrastructure and Networking in APQ8009, APQ8053, QCA6390, QCN7605, QCN7606, SA415M, SA515M, SA6155P, SA8155P, SC8180X, SDX55 |
| u'Buffer over-read issue in Bluetooth estack due to lack of check for invalid length of L2cap configuration request received from peer device.' in Snapdragon Auto, Snapdragon Compute, Snapdragon Connectivity, Snapdragon Consumer Electronics Connectivity, Snapdragon Consumer IOT, Snapdragon Industrial IOT, Snapdragon Mobile, Snapdragon Voice & Music, Snapdragon Wired Infrastructure and Networking in APQ8009, APQ8053, QCA6390, QCN7605, SA415M, SA515M, SC8180X, SDX55, SM8250 |
| u'Bluetooth devices does not properly restrict the L2CAP payload length allowing users in radio range to cause a buffer overflow via a crafted Link Layer packet(Equivalent to CVE-2019-17060,CVE-2019-17061 and CVE-2019-17517 in Sweyntooth paper)' in Snapdragon Compute, Snapdragon Consumer IOT, Snapdragon Industrial IOT, Snapdragon IoT, Snapdragon Mobile, Snapdragon Voice & Music in AR9344 |
| The OKLOK (3.1.1) mobile companion app for Fingerprint Bluetooth Padlock FB50 (2.3) does not correctly implement its timeout on the four-digit verification code that is required for resetting passwords, nor does it properly restrict excessive verification attempts. This allows an attacker to brute force the four-digit verification code in order to bypass email verification and change the password of a victim account. |
| Legacy pairing and secure-connections pairing authentication in Bluetooth BR/EDR Core Specification v5.2 and earlier may allow an unauthenticated user to complete authentication without pairing credentials via adjacent access. An unauthenticated, adjacent attacker could impersonate a Bluetooth BR/EDR master or slave to pair with a previously paired remote device to successfully complete the authentication procedure without knowing the link key. |
| Pairing in Bluetooth® Core v5.2 and earlier may permit an unauthenticated attacker to acquire credentials with two pairing devices via adjacent access when the unauthenticated user initiates different pairing methods in each peer device and an end-user erroneously completes both pairing procedures with the MITM using the confirmation number of one peer as the passkey of the other. An adjacent, unauthenticated attacker could be able to initiate any Bluetooth operation on either attacked device exposed by the enabled Bluetooth profiles. This exposure may be limited when the user must authorize certain access explicitly, but so long as a user assumes that it is the intended remote device requesting permissions, device-local protections may be weakened. |
| Zephyr Bluetooth unchecked packet data results in denial of service. Zephyr versions >= v1.14.2, >= v2.2.0 contain Improper Handling of Parameters (CWE-233). For more information, see https://github.com/zephyrproject-rtos/zephyr/security/advisories/GHSA-f6vh-7v4x-8fjp |
| In the Zephyr project Bluetooth subsystem, certain duplicate and back-to-back packets can cause incorrect behavior, resulting in a denial of service. This issue affects: zephyrproject-rtos zephyr version 2.2.0 and later versions, and version 1.14.0 and later versions. |
