| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A server-side request forgery vulnerability exists in Jenkins 2.120 and older, LTS 2.107.2 and older in ZipExtractionInstaller.java that allows users with Overall/Read permission to have Jenkins submit a HTTP GET request to an arbitrary URL and learn whether the response is successful (200) or not. |
| OpenFlow version 1.0 onwards contains a Denial of Service and Improper authorization vulnerability in OpenFlow handshake: The DPID (DataPath IDentifier) in the features_reply message are inherently trusted by the controller. that can result in Denial of Service, Unauthorized Access, Network Instability. This attack appear to be exploitable via Network connectivity: the attacker must first establish a transport connection with the OpenFlow controller and then initiate the OpenFlow handshake. |
| UnboundID LDAP SDK version from commit 801111d8b5c732266a5dbd4b3bb0b6c7b94d7afb up to commit 8471904a02438c03965d21367890276bc25fa5a6, where the issue was reported and fixed contains an Incorrect Access Control vulnerability in process function in SimpleBindRequest class doesn't check for empty password when running in synchronous mode. commit with applied fix https://github.com/pingidentity/ldapsdk/commit/8471904a02438c03965d21367890276bc25fa5a6#diff-f6cb23b459be1ec17df1da33760087fd that can result in Ability to impersonate any valid user. This attack appear to be exploitable via Providing valid username and empty password against servers that do not do additional validation as per https://tools.ietf.org/html/rfc4513#section-5.1.1. This vulnerability appears to have been fixed in after commit 8471904a02438c03965d21367890276bc25fa5a6. |
| An improper authorization vulnerability exists in Jenkins versions 2.106 and earlier, and LTS 2.89.3 and earlier, that allows an attacker to have Jenkins submit HTTP GET requests and get limited information about the response. |
| On Jenkins instances with Authorize Project plugin, the authentication associated with a build may lack the Computer/Build permission on some agents. This did not prevent the execution of Pipeline `node` blocks on those agents due to incorrect permissions checks in Pipeline: Nodes and Processes plugin 2.17 and earlier. |
| The Credential Security Support Provider protocol (CredSSP) in Microsoft Windows Server 2008 SP2 and R2 SP1, Windows 7 SP1, Windows 8.1 and RT 8.1, Windows Server 2012 and R2, Windows 10 Gold, 1511, 1607, 1703, and 1709 Windows Server 2016 and Windows Server, version 1709 allows a remote code execution vulnerability due to how CredSSP validates request during the authentication process, aka "CredSSP Remote Code Execution Vulnerability". |
| BN-SDWBP3 firmware version 1.0.9 and earlier allows an attacker on the same network segment to bypass authentication to access to the management screen and execute an arbitrary command via unspecified vectors. |
| INplc-RT 3.08 and earlier allows remote attackers to bypass authentication to execute an arbitrary command through the protocol-compliant traffic. This is a different vulnerability than CVE-2018-0669. |
| INplc-RT 3.08 and earlier allows remote attackers to bypass authentication to execute an arbitrary command through the protocol-compliant traffic. This is a different vulnerability than CVE-2018-0670. |
| Cybozu Office 10.0.0 to 10.7.0 allows authenticated attackers to bypass authentication to view the schedules that are not permitted to access via unspecified vectors. |
| Mediawiki 1.31 before 1.31.1, 1.30.1, 1.29.3 and 1.27.5 contains a flaw where BotPasswords can bypass CentralAuth's account lock |
| Shibboleth XMLTooling-C before 1.6.4, as used in Shibboleth Service Provider before 2.6.1.4 on Windows and other products, mishandles digital signatures of user data, which allows remote attackers to obtain sensitive information or conduct impersonation attacks via crafted XML data. NOTE: this issue exists because of an incomplete fix for CVE-2018-0486. |
| Shibboleth XMLTooling-C before 1.6.3, as used in Shibboleth Service Provider before 2.6.0 on Windows and other products, mishandles digital signatures of user attribute data, which allows remote attackers to obtain sensitive information or conduct impersonation attacks via a crafted DTD. |
| A vulnerability in the access control logic of the Secure Shell (SSH) server of Cisco IOS and IOS XE Software may allow connections sourced from a virtual routing and forwarding (VRF) instance despite the absence of the vrf-also keyword in the access-class configuration. The vulnerability is due to a missing check in the SSH server. An attacker could use this vulnerability to open an SSH connection to an affected Cisco IOS or IOS XE device with a source address belonging to a VRF instance. Once connected, the attacker would still need to provide valid credentials to access the device. |
| A vulnerability in the session identification management functionality of the web-based interface of Cisco Wireless LAN Controller (WLC) Software could allow an unauthenticated, remote attacker to hijack a valid user session on an affected system. The vulnerability exists because the affected software does not properly clear previously assigned session identifiers for a user session when a user authenticates to the web-based interface. An attacker could exploit this vulnerability by using an existing session identifier to connect to the software through the web-based interface. Successful exploitation could allow the attacker to hijack an authenticated user's browser session on the system. Versions 8.1 and 8.5 are affected. |
| An authentication bypass vulnerability in the initial boot sequence of Juniper Networks Junos OS on vSRX Series may allow an attacker to gain full control of the system without authentication when the system is initially booted up. Affected releases are Juniper Networks Junos OS: 15.1X49 versions prior to 15.1X49-D30 on vSRX. |
| If RSH service is enabled on Junos OS and if the PAM authentication is disabled, a remote unauthenticated attacker can obtain root access to the device. RSH service is disabled by default on Junos. There is no documented CLI command to enable this service. However, an undocumented CLI command allows a privileged Junos user to enable RSH service and disable PAM, and hence expose the system to unauthenticated root access. When RSH is enabled, the device is listing to RSH connections on port 514. This issue is not exploitable on platforms where Junos release is based on FreeBSD 10+. Affected releases are Juniper Networks Junos OS: 12.1X46 versions prior to 12.1X46-D77 on SRX Series; 12.3 versions prior to 12.3R12-S10; 12.3X48 versions prior to 12.3X48-D75 on SRX Series; 14.1X53 versions prior to 14.1X53-D47 on QFX/EX Series; 15.1 versions prior to 15.1R4-S9, 15.1R6-S6, 15.1R7; 15.1X49 versions prior to 15.1X49-D131, 15.1X49-D140 on SRX Series; 15.1X53 versions prior to 15.1X53-D59 on EX2300/EX3400 Series; 15.1X53 versions prior to 15.1X53-D67 on QFX10K Series; 15.1X53 versions prior to 15.1X53-D233 on QFX5200/QFX5110 Series; 15.1X53 versions prior to 15.1X53-D471, 15.1X53-D490 on NFX Series; 16.1 versions prior to 16.1R3-S9, 16.1R4-S9, 16.1R5-S4, 16.1R6-S4, 16.1R7; 16.2 versions prior to 16.2R2-S5; 17.1 versions prior to 17.1R1-S7, 17.1R2-S7, 17.1R3; 17.2 versions prior to 17.2R1-S6, 17.2R2-S4, 17.2R3; 17.2X75 versions prior to 17.2X75-D110, 17.2X75-D91; 17.3 versions prior to 17.3R1-S4, 17.3R2-S2, 17.3R3; 17.4 versions prior to 17.4R1-S3, 17.4R2; 18.2X75 versions prior to 18.2X75-D5. |
| An insecure SSHD configuration in Juniper Device Manager (JDM) and host OS on Juniper NFX Series devices may allow remote unauthenticated access if any of the passwords on the system are empty. The affected SSHD configuration has the PermitEmptyPasswords option set to "yes". Affected releases are Juniper Networks Junos OS: 18.1 versions prior to 18.1R4 on NFX Series. |
| An unauthenticated root login may allow upon reboot when a commit script is used. A commit script allows a device administrator to execute certain instructions during commit, which is configured under the [system scripts commit] stanza. Certain commit scripts that work without a problem during normal commit may cause unexpected behavior upon reboot which can leave the system in a state where root CLI login is allowed without a password due to the system reverting to a "safe mode" authentication state. Lastly, only logging in physically to the console port as root, with no password, will work. Affected releases are Juniper Networks Junos OS: 12.1X46 versions prior to 12.1X46-D71 on SRX; 12.3X48 versions prior to 12.3X48-D55 on SRX; 14.1 versions prior to 14.1R9; 14.1X53 versions prior to 14.1X53-D40 on QFX, EX; 14.2 versions prior to 14.2R7-S9, 14.2R8; 15.1 versions prior to 15.1F5-S7, 15.1F6-S8, 15.1R5-S6, 15.1R6; 15.1X49 versions prior to 15.1X49-D110 on SRX; 15.1X53 versions prior to 15.1X53-D232 on QFX5200/5110; 15.1X53 versions prior to 15.1X53-D49, 15.1X53-D470 on NFX; 15.1X53 versions prior to 15.1X53-D65 on QFX10K; 16.1 versions prior to 16.1R2. No other Juniper Networks products or platforms are affected by this issue. |
| The National Payments Corporation of India BHIM application 1.3 for Android uses a custom keypad for which the input element is available to the Accessibility service, which makes it easier for attackers to bypass authentication. |
