| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
powerpc/kasan: Fix addr error caused by page alignment
In kasan_init_region, when k_start is not page aligned, at the begin of
for loop, k_cur = k_start & PAGE_MASK is less than k_start, and then
`va = block + k_cur - k_start` is less than block, the addr va is invalid,
because the memory address space from va to block is not alloced by
memblock_alloc, which will not be reserved by memblock_reserve later, it
will be used by other places.
As a result, memory overwriting occurs.
for example:
int __init __weak kasan_init_region(void *start, size_t size)
{
[...]
/* if say block(dcd97000) k_start(feef7400) k_end(feeff3fe) */
block = memblock_alloc(k_end - k_start, PAGE_SIZE);
[...]
for (k_cur = k_start & PAGE_MASK; k_cur < k_end; k_cur += PAGE_SIZE) {
/* at the begin of for loop
* block(dcd97000) va(dcd96c00) k_cur(feef7000) k_start(feef7400)
* va(dcd96c00) is less than block(dcd97000), va is invalid
*/
void *va = block + k_cur - k_start;
[...]
}
[...]
}
Therefore, page alignment is performed on k_start before
memblock_alloc() to ensure the validity of the VA address. |
| In the Linux kernel, the following vulnerability has been resolved:
parisc: Fix random data corruption from exception handler
The current exception handler implementation, which assists when accessing
user space memory, may exhibit random data corruption if the compiler decides
to use a different register than the specified register %r29 (defined in
ASM_EXCEPTIONTABLE_REG) for the error code. If the compiler choose another
register, the fault handler will nevertheless store -EFAULT into %r29 and thus
trash whatever this register is used for.
Looking at the assembly I found that this happens sometimes in emulate_ldd().
To solve the issue, the easiest solution would be if it somehow is
possible to tell the fault handler which register is used to hold the error
code. Using %0 or %1 in the inline assembly is not posssible as it will show
up as e.g. %r29 (with the "%r" prefix), which the GNU assembler can not
convert to an integer.
This patch takes another, better and more flexible approach:
We extend the __ex_table (which is out of the execution path) by one 32-word.
In this word we tell the compiler to insert the assembler instruction
"or %r0,%r0,%reg", where %reg references the register which the compiler
choosed for the error return code.
In case of an access failure, the fault handler finds the __ex_table entry and
can examine the opcode. The used register is encoded in the lowest 5 bits, and
the fault handler can then store -EFAULT into this register.
Since we extend the __ex_table to 3 words we can't use the BUILDTIME_TABLE_SORT
config option any longer. |
| In the Linux kernel, the following vulnerability has been resolved:
nilfs2: fix data corruption in dsync block recovery for small block sizes
The helper function nilfs_recovery_copy_block() of
nilfs_recovery_dsync_blocks(), which recovers data from logs created by
data sync writes during a mount after an unclean shutdown, incorrectly
calculates the on-page offset when copying repair data to the file's page
cache. In environments where the block size is smaller than the page
size, this flaw can cause data corruption and leak uninitialized memory
bytes during the recovery process.
Fix these issues by correcting this byte offset calculation on the page. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: Fix regression in writes when non-standard maximum write size negotiated
The conversion to netfs in the 6.3 kernel caused a regression when
maximum write size is set by the server to an unexpected value which is
not a multiple of 4096 (similarly if the user overrides the maximum
write size by setting mount parm "wsize", but sets it to a value that
is not a multiple of 4096). When negotiated write size is not a
multiple of 4096 the netfs code can skip the end of the final
page when doing large sequential writes, causing data corruption.
This section of code is being rewritten/removed due to a large
netfs change, but until that point (ie for the 6.3 kernel until now)
we can not support non-standard maximum write sizes.
Add a warning if a user specifies a wsize on mount that is not
a multiple of 4096 (and round down), also add a change where we
round down the maximum write size if the server negotiates a value
that is not a multiple of 4096 (we also have to check to make sure that
we do not round it down to zero). |
| In the Linux kernel, the following vulnerability has been resolved:
net: stmmac: protect updates of 64-bit statistics counters
As explained by a comment in <linux/u64_stats_sync.h>, write side of struct
u64_stats_sync must ensure mutual exclusion, or one seqcount update could
be lost on 32-bit platforms, thus blocking readers forever. Such lockups
have been observed in real world after stmmac_xmit() on one CPU raced with
stmmac_napi_poll_tx() on another CPU.
To fix the issue without introducing a new lock, split the statics into
three parts:
1. fields updated only under the tx queue lock,
2. fields updated only during NAPI poll,
3. fields updated only from interrupt context,
Updates to fields in the first two groups are already serialized through
other locks. It is sufficient to split the existing struct u64_stats_sync
so that each group has its own.
Note that tx_set_ic_bit is updated from both contexts. Split this counter
so that each context gets its own, and calculate their sum to get the total
value in stmmac_get_ethtool_stats().
For the third group, multiple interrupts may be processed by different CPUs
at the same time, but interrupts on the same CPU will not nest. Move fields
from this group to a newly created per-cpu struct stmmac_pcpu_stats. |
| In the Linux kernel, the following vulnerability has been resolved:
ceph: prevent use-after-free in encode_cap_msg()
In fs/ceph/caps.c, in encode_cap_msg(), "use after free" error was
caught by KASAN at this line - 'ceph_buffer_get(arg->xattr_buf);'. This
implies before the refcount could be increment here, it was freed.
In same file, in "handle_cap_grant()" refcount is decremented by this
line - 'ceph_buffer_put(ci->i_xattrs.blob);'. It appears that a race
occurred and resource was freed by the latter line before the former
line could increment it.
encode_cap_msg() is called by __send_cap() and __send_cap() is called by
ceph_check_caps() after calling __prep_cap(). __prep_cap() is where
arg->xattr_buf is assigned to ci->i_xattrs.blob. This is the spot where
the refcount must be increased to prevent "use after free" error. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: fix RCU use in TDLS fast-xmit
This looks up the link under RCU protection, but isn't
guaranteed to actually have protection. Fix that. |
| In the Linux kernel, the following vulnerability has been resolved:
tunnels: fix out of bounds access when building IPv6 PMTU error
If the ICMPv6 error is built from a non-linear skb we get the following
splat,
BUG: KASAN: slab-out-of-bounds in do_csum+0x220/0x240
Read of size 4 at addr ffff88811d402c80 by task netperf/820
CPU: 0 PID: 820 Comm: netperf Not tainted 6.8.0-rc1+ #543
...
kasan_report+0xd8/0x110
do_csum+0x220/0x240
csum_partial+0xc/0x20
skb_tunnel_check_pmtu+0xeb9/0x3280
vxlan_xmit_one+0x14c2/0x4080
vxlan_xmit+0xf61/0x5c00
dev_hard_start_xmit+0xfb/0x510
__dev_queue_xmit+0x7cd/0x32a0
br_dev_queue_push_xmit+0x39d/0x6a0
Use skb_checksum instead of csum_partial who cannot deal with non-linear
SKBs. |
| In the Linux kernel, the following vulnerability has been resolved:
hwmon: (coretemp) Fix out-of-bounds memory access
Fix a bug that pdata->cpu_map[] is set before out-of-bounds check.
The problem might be triggered on systems with more than 128 cores per
package. |
| In the Linux kernel, the following vulnerability has been resolved:
tipc: Check the bearer type before calling tipc_udp_nl_bearer_add()
syzbot reported the following general protection fault [1]:
general protection fault, probably for non-canonical address 0xdffffc0000000010: 0000 [#1] PREEMPT SMP KASAN
KASAN: null-ptr-deref in range [0x0000000000000080-0x0000000000000087]
...
RIP: 0010:tipc_udp_is_known_peer+0x9c/0x250 net/tipc/udp_media.c:291
...
Call Trace:
<TASK>
tipc_udp_nl_bearer_add+0x212/0x2f0 net/tipc/udp_media.c:646
tipc_nl_bearer_add+0x21e/0x360 net/tipc/bearer.c:1089
genl_family_rcv_msg_doit+0x1fc/0x2e0 net/netlink/genetlink.c:972
genl_family_rcv_msg net/netlink/genetlink.c:1052 [inline]
genl_rcv_msg+0x561/0x800 net/netlink/genetlink.c:1067
netlink_rcv_skb+0x16b/0x440 net/netlink/af_netlink.c:2544
genl_rcv+0x28/0x40 net/netlink/genetlink.c:1076
netlink_unicast_kernel net/netlink/af_netlink.c:1341 [inline]
netlink_unicast+0x53b/0x810 net/netlink/af_netlink.c:1367
netlink_sendmsg+0x8b7/0xd70 net/netlink/af_netlink.c:1909
sock_sendmsg_nosec net/socket.c:730 [inline]
__sock_sendmsg+0xd5/0x180 net/socket.c:745
____sys_sendmsg+0x6ac/0x940 net/socket.c:2584
___sys_sendmsg+0x135/0x1d0 net/socket.c:2638
__sys_sendmsg+0x117/0x1e0 net/socket.c:2667
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0x40/0x110 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x63/0x6b
The cause of this issue is that when tipc_nl_bearer_add() is called with
the TIPC_NLA_BEARER_UDP_OPTS attribute, tipc_udp_nl_bearer_add() is called
even if the bearer is not UDP.
tipc_udp_is_known_peer() called by tipc_udp_nl_bearer_add() assumes that
the media_ptr field of the tipc_bearer has an udp_bearer type object, so
the function goes crazy for non-UDP bearers.
This patch fixes the issue by checking the bearer type before calling
tipc_udp_nl_bearer_add() in tipc_nl_bearer_add(). |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Implement bounds check for stream encoder creation in DCN301
'stream_enc_regs' array is an array of dcn10_stream_enc_registers
structures. The array is initialized with four elements, corresponding
to the four calls to stream_enc_regs() in the array initializer. This
means that valid indices for this array are 0, 1, 2, and 3.
The error message 'stream_enc_regs' 4 <= 5 below, is indicating that
there is an attempt to access this array with an index of 5, which is
out of bounds. This could lead to undefined behavior
Here, eng_id is used as an index to access the stream_enc_regs array. If
eng_id is 5, this would result in an out-of-bounds access on the
stream_enc_regs array.
Thus fixing Buffer overflow error in dcn301_stream_encoder_create
reported by Smatch:
drivers/gpu/drm/amd/amdgpu/../display/dc/resource/dcn301/dcn301_resource.c:1011 dcn301_stream_encoder_create() error: buffer overflow 'stream_enc_regs' 4 <= 5 |
| In the Linux kernel, the following vulnerability has been resolved:
xhci: handle isoc Babble and Buffer Overrun events properly
xHCI 4.9 explicitly forbids assuming that the xHC has released its
ownership of a multi-TRB TD when it reports an error on one of the
early TRBs. Yet the driver makes such assumption and releases the TD,
allowing the remaining TRBs to be freed or overwritten by new TDs.
The xHC should also report completion of the final TRB due to its IOC
flag being set by us, regardless of prior errors. This event cannot
be recognized if the TD has already been freed earlier, resulting in
"Transfer event TRB DMA ptr not part of current TD" error message.
Fix this by reusing the logic for processing isoc Transaction Errors.
This also handles hosts which fail to report the final completion.
Fix transfer length reporting on Babble errors. They may be caused by
device malfunction, no guarantee that the buffer has been filled. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: fix use-after-free bug
The bug can be triggered by sending a single amdgpu_gem_userptr_ioctl
to the AMDGPU DRM driver on any ASICs with an invalid address and size.
The bug was reported by Joonkyo Jung <joonkyoj@yonsei.ac.kr>.
For example the following code:
static void Syzkaller1(int fd)
{
struct drm_amdgpu_gem_userptr arg;
int ret;
arg.addr = 0xffffffffffff0000;
arg.size = 0x80000000; /*2 Gb*/
arg.flags = 0x7;
ret = drmIoctl(fd, 0xc1186451/*amdgpu_gem_userptr_ioctl*/, &arg);
}
Due to the address and size are not valid there is a failure in
amdgpu_hmm_register->mmu_interval_notifier_insert->__mmu_interval_notifier_insert->
check_shl_overflow, but we even the amdgpu_hmm_register failure we still call
amdgpu_hmm_unregister into amdgpu_gem_object_free which causes access to a bad address.
The following stack is below when the issue is reproduced when Kazan is enabled:
[ +0.000014] Hardware name: ASUS System Product Name/ROG STRIX B550-F GAMING (WI-FI), BIOS 1401 12/03/2020
[ +0.000009] RIP: 0010:mmu_interval_notifier_remove+0x327/0x340
[ +0.000017] Code: ff ff 49 89 44 24 08 48 b8 00 01 00 00 00 00 ad de 4c 89 f7 49 89 47 40 48 83 c0 22 49 89 47 48 e8 ce d1 2d 01 e9 32 ff ff ff <0f> 0b e9 16 ff ff ff 4c 89 ef e8 fa 14 b3 ff e9 36 ff ff ff e8 80
[ +0.000014] RSP: 0018:ffffc90002657988 EFLAGS: 00010246
[ +0.000013] RAX: 0000000000000000 RBX: 1ffff920004caf35 RCX: ffffffff8160565b
[ +0.000011] RDX: dffffc0000000000 RSI: 0000000000000004 RDI: ffff8881a9f78260
[ +0.000010] RBP: ffffc90002657a70 R08: 0000000000000001 R09: fffff520004caf25
[ +0.000010] R10: 0000000000000003 R11: ffffffff8161d1d6 R12: ffff88810e988c00
[ +0.000010] R13: ffff888126fb5a00 R14: ffff88810e988c0c R15: ffff8881a9f78260
[ +0.000011] FS: 00007ff9ec848540(0000) GS:ffff8883cc880000(0000) knlGS:0000000000000000
[ +0.000012] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ +0.000010] CR2: 000055b3f7e14328 CR3: 00000001b5770000 CR4: 0000000000350ef0
[ +0.000010] Call Trace:
[ +0.000006] <TASK>
[ +0.000007] ? show_regs+0x6a/0x80
[ +0.000018] ? __warn+0xa5/0x1b0
[ +0.000019] ? mmu_interval_notifier_remove+0x327/0x340
[ +0.000018] ? report_bug+0x24a/0x290
[ +0.000022] ? handle_bug+0x46/0x90
[ +0.000015] ? exc_invalid_op+0x19/0x50
[ +0.000016] ? asm_exc_invalid_op+0x1b/0x20
[ +0.000017] ? kasan_save_stack+0x26/0x50
[ +0.000017] ? mmu_interval_notifier_remove+0x23b/0x340
[ +0.000019] ? mmu_interval_notifier_remove+0x327/0x340
[ +0.000019] ? mmu_interval_notifier_remove+0x23b/0x340
[ +0.000020] ? __pfx_mmu_interval_notifier_remove+0x10/0x10
[ +0.000017] ? kasan_save_alloc_info+0x1e/0x30
[ +0.000018] ? srso_return_thunk+0x5/0x5f
[ +0.000014] ? __kasan_kmalloc+0xb1/0xc0
[ +0.000018] ? srso_return_thunk+0x5/0x5f
[ +0.000013] ? __kasan_check_read+0x11/0x20
[ +0.000020] amdgpu_hmm_unregister+0x34/0x50 [amdgpu]
[ +0.004695] amdgpu_gem_object_free+0x66/0xa0 [amdgpu]
[ +0.004534] ? __pfx_amdgpu_gem_object_free+0x10/0x10 [amdgpu]
[ +0.004291] ? do_syscall_64+0x5f/0xe0
[ +0.000023] ? srso_return_thunk+0x5/0x5f
[ +0.000017] drm_gem_object_free+0x3b/0x50 [drm]
[ +0.000489] amdgpu_gem_userptr_ioctl+0x306/0x500 [amdgpu]
[ +0.004295] ? __pfx_amdgpu_gem_userptr_ioctl+0x10/0x10 [amdgpu]
[ +0.004270] ? srso_return_thunk+0x5/0x5f
[ +0.000014] ? __this_cpu_preempt_check+0x13/0x20
[ +0.000015] ? srso_return_thunk+0x5/0x5f
[ +0.000013] ? sysvec_apic_timer_interrupt+0x57/0xc0
[ +0.000020] ? srso_return_thunk+0x5/0x5f
[ +0.000014] ? asm_sysvec_apic_timer_interrupt+0x1b/0x20
[ +0.000022] ? drm_ioctl_kernel+0x17b/0x1f0 [drm]
[ +0.000496] ? __pfx_amdgpu_gem_userptr_ioctl+0x10/0x10 [amdgpu]
[ +0.004272] ? drm_ioctl_kernel+0x190/0x1f0 [drm]
[ +0.000492] drm_ioctl_kernel+0x140/0x1f0 [drm]
[ +0.000497] ? __pfx_amdgpu_gem_userptr_ioctl+0x10/0x10 [amdgpu]
[ +0.004297] ? __pfx_drm_ioctl_kernel+0x10/0x10 [d
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: sh: aica: reorder cleanup operations to avoid UAF bugs
The dreamcastcard->timer could schedule the spu_dma_work and the
spu_dma_work could also arm the dreamcastcard->timer.
When the snd_pcm_substream is closing, the aica_channel will be
deallocated. But it could still be dereferenced in the worker
thread. The reason is that del_timer() will return directly
regardless of whether the timer handler is running or not and
the worker could be rescheduled in the timer handler. As a result,
the UAF bug will happen. The racy situation is shown below:
(Thread 1) | (Thread 2)
snd_aicapcm_pcm_close() |
... | run_spu_dma() //worker
| mod_timer()
flush_work() |
del_timer() | aica_period_elapsed() //timer
kfree(dreamcastcard->channel) | schedule_work()
| run_spu_dma() //worker
... | dreamcastcard->channel-> //USE
In order to mitigate this bug and other possible corner cases,
call mod_timer() conditionally in run_spu_dma(), then implement
PCM sync_stop op to cancel both the timer and worker. The sync_stop
op will be called from PCM core appropriately when needed. |
| In the Linux kernel, the following vulnerability has been resolved:
thermal: intel: hfi: Add syscore callbacks for system-wide PM
The kernel allocates a memory buffer and provides its location to the
hardware, which uses it to update the HFI table. This allocation occurs
during boot and remains constant throughout runtime.
When resuming from hibernation, the restore kernel allocates a second
memory buffer and reprograms the HFI hardware with the new location as
part of a normal boot. The location of the second memory buffer may
differ from the one allocated by the image kernel.
When the restore kernel transfers control to the image kernel, its HFI
buffer becomes invalid, potentially leading to memory corruption if the
hardware writes to it (the hardware continues to use the buffer from the
restore kernel).
It is also possible that the hardware "forgets" the address of the memory
buffer when resuming from "deep" suspend. Memory corruption may also occur
in such a scenario.
To prevent the described memory corruption, disable HFI when preparing to
suspend or hibernate. Enable it when resuming.
Add syscore callbacks to handle the package of the boot CPU (packages of
non-boot CPUs are handled via CPU offline). Syscore ops always run on the
boot CPU. Additionally, HFI only needs to be disabled during "deep" suspend
and hibernation. Syscore ops only run in these cases.
[ rjw: Comment adjustment, subject and changelog edits ] |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_tables: mark set as dead when unbinding anonymous set with timeout
While the rhashtable set gc runs asynchronously, a race allows it to
collect elements from anonymous sets with timeouts while it is being
released from the commit path.
Mingi Cho originally reported this issue in a different path in 6.1.x
with a pipapo set with low timeouts which is not possible upstream since
7395dfacfff6 ("netfilter: nf_tables: use timestamp to check for set
element timeout").
Fix this by setting on the dead flag for anonymous sets to skip async gc
in this case.
According to 08e4c8c5919f ("netfilter: nf_tables: mark newset as dead on
transaction abort"), Florian plans to accelerate abort path by releasing
objects via workqueue, therefore, this sets on the dead flag for abort
path too. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_tables: disallow anonymous set with timeout flag
Anonymous sets are never used with timeout from userspace, reject this.
Exception to this rule is NFT_SET_EVAL to ensure legacy meters still work. |
| In the Linux kernel, the following vulnerability has been resolved:
ip6_tunnel: make sure to pull inner header in __ip6_tnl_rcv()
syzbot found __ip6_tnl_rcv() could access unitiliazed data [1].
Call pskb_inet_may_pull() to fix this, and initialize ipv6h
variable after this call as it can change skb->head.
[1]
BUG: KMSAN: uninit-value in __INET_ECN_decapsulate include/net/inet_ecn.h:253 [inline]
BUG: KMSAN: uninit-value in INET_ECN_decapsulate include/net/inet_ecn.h:275 [inline]
BUG: KMSAN: uninit-value in IP6_ECN_decapsulate+0x7df/0x1e50 include/net/inet_ecn.h:321
__INET_ECN_decapsulate include/net/inet_ecn.h:253 [inline]
INET_ECN_decapsulate include/net/inet_ecn.h:275 [inline]
IP6_ECN_decapsulate+0x7df/0x1e50 include/net/inet_ecn.h:321
ip6ip6_dscp_ecn_decapsulate+0x178/0x1b0 net/ipv6/ip6_tunnel.c:727
__ip6_tnl_rcv+0xd4e/0x1590 net/ipv6/ip6_tunnel.c:845
ip6_tnl_rcv+0xce/0x100 net/ipv6/ip6_tunnel.c:888
gre_rcv+0x143f/0x1870
ip6_protocol_deliver_rcu+0xda6/0x2a60 net/ipv6/ip6_input.c:438
ip6_input_finish net/ipv6/ip6_input.c:483 [inline]
NF_HOOK include/linux/netfilter.h:314 [inline]
ip6_input+0x15d/0x430 net/ipv6/ip6_input.c:492
ip6_mc_input+0xa7e/0xc80 net/ipv6/ip6_input.c:586
dst_input include/net/dst.h:461 [inline]
ip6_rcv_finish+0x5db/0x870 net/ipv6/ip6_input.c:79
NF_HOOK include/linux/netfilter.h:314 [inline]
ipv6_rcv+0xda/0x390 net/ipv6/ip6_input.c:310
__netif_receive_skb_one_core net/core/dev.c:5532 [inline]
__netif_receive_skb+0x1a6/0x5a0 net/core/dev.c:5646
netif_receive_skb_internal net/core/dev.c:5732 [inline]
netif_receive_skb+0x58/0x660 net/core/dev.c:5791
tun_rx_batched+0x3ee/0x980 drivers/net/tun.c:1555
tun_get_user+0x53af/0x66d0 drivers/net/tun.c:2002
tun_chr_write_iter+0x3af/0x5d0 drivers/net/tun.c:2048
call_write_iter include/linux/fs.h:2084 [inline]
new_sync_write fs/read_write.c:497 [inline]
vfs_write+0x786/0x1200 fs/read_write.c:590
ksys_write+0x20f/0x4c0 fs/read_write.c:643
__do_sys_write fs/read_write.c:655 [inline]
__se_sys_write fs/read_write.c:652 [inline]
__x64_sys_write+0x93/0xd0 fs/read_write.c:652
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0x6d/0x140 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x63/0x6b
Uninit was created at:
slab_post_alloc_hook+0x129/0xa70 mm/slab.h:768
slab_alloc_node mm/slub.c:3478 [inline]
kmem_cache_alloc_node+0x5e9/0xb10 mm/slub.c:3523
kmalloc_reserve+0x13d/0x4a0 net/core/skbuff.c:560
__alloc_skb+0x318/0x740 net/core/skbuff.c:651
alloc_skb include/linux/skbuff.h:1286 [inline]
alloc_skb_with_frags+0xc8/0xbd0 net/core/skbuff.c:6334
sock_alloc_send_pskb+0xa80/0xbf0 net/core/sock.c:2787
tun_alloc_skb drivers/net/tun.c:1531 [inline]
tun_get_user+0x1e8a/0x66d0 drivers/net/tun.c:1846
tun_chr_write_iter+0x3af/0x5d0 drivers/net/tun.c:2048
call_write_iter include/linux/fs.h:2084 [inline]
new_sync_write fs/read_write.c:497 [inline]
vfs_write+0x786/0x1200 fs/read_write.c:590
ksys_write+0x20f/0x4c0 fs/read_write.c:643
__do_sys_write fs/read_write.c:655 [inline]
__se_sys_write fs/read_write.c:652 [inline]
__x64_sys_write+0x93/0xd0 fs/read_write.c:652
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0x6d/0x140 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x63/0x6b
CPU: 0 PID: 5034 Comm: syz-executor331 Not tainted 6.7.0-syzkaller-00562-g9f8413c4a66f #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 11/17/2023 |
| In the Linux kernel, the following vulnerability has been resolved:
tcp: add sanity checks to rx zerocopy
TCP rx zerocopy intent is to map pages initially allocated
from NIC drivers, not pages owned by a fs.
This patch adds to can_map_frag() these additional checks:
- Page must not be a compound one.
- page->mapping must be NULL.
This fixes the panic reported by ZhangPeng.
syzbot was able to loopback packets built with sendfile(),
mapping pages owned by an ext4 file to TCP rx zerocopy.
r3 = socket$inet_tcp(0x2, 0x1, 0x0)
mmap(&(0x7f0000ff9000/0x4000)=nil, 0x4000, 0x0, 0x12, r3, 0x0)
r4 = socket$inet_tcp(0x2, 0x1, 0x0)
bind$inet(r4, &(0x7f0000000000)={0x2, 0x4e24, @multicast1}, 0x10)
connect$inet(r4, &(0x7f00000006c0)={0x2, 0x4e24, @empty}, 0x10)
r5 = openat$dir(0xffffffffffffff9c, &(0x7f00000000c0)='./file0\x00',
0x181e42, 0x0)
fallocate(r5, 0x0, 0x0, 0x85b8)
sendfile(r4, r5, 0x0, 0x8ba0)
getsockopt$inet_tcp_TCP_ZEROCOPY_RECEIVE(r4, 0x6, 0x23,
&(0x7f00000001c0)={&(0x7f0000ffb000/0x3000)=nil, 0x3000, 0x0, 0x0, 0x0,
0x0, 0x0, 0x0, 0x0}, &(0x7f0000000440)=0x40)
r6 = openat$dir(0xffffffffffffff9c, &(0x7f00000000c0)='./file0\x00',
0x181e42, 0x0) |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath11k: rely on mac80211 debugfs handling for vif
mac80211 started to delete debugfs entries in certain cases, causing a
ath11k to crash when it tried to delete the entries later. Fix this by
relying on mac80211 to delete the entries when appropriate and adding
them from the vif_add_debugfs handler. |
