| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A vulnerability in the authentication, authorization, and accounting (AAA) function of Cisco IOS XE Software could allow an unauthenticated, remote attacker to bypass NETCONF or RESTCONF authentication and do either of the following: Install, manipulate, or delete the configuration of an affected device Cause memory corruption that results in a denial of service (DoS) on an affected device This vulnerability is due to an uninitialized variable. An attacker could exploit this vulnerability by sending a series of NETCONF or RESTCONF requests to an affected device. A successful exploit could allow the attacker to use NETCONF or RESTCONF to install, manipulate, or delete the configuration of a network device or to corrupt memory on the device, resulting a DoS. |
| A vulnerability in the H.323 application level gateway (ALG) used by the Network Address Translation (NAT) feature of Cisco IOS XE Software could allow an unauthenticated, remote attacker to bypass the ALG. This vulnerability is due to insufficient data validation of traffic that is traversing the ALG. An attacker could exploit this vulnerability by sending crafted traffic to a targeted device. A successful exploit could allow the attacker to bypass the ALG and open connections that should not be allowed to a remote device located behind the ALG. Note: This vulnerability has been publicly discussed as NAT Slipstreaming. |
| A vulnerability in Ethernet over GRE (EoGRE) packet processing of Cisco IOS XE Wireless Controller Software for the Cisco Catalyst 9800 Family Wireless Controller, Embedded Wireless Controller, and Embedded Wireless on Catalyst 9000 Series Switches could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. This vulnerability is due to improper processing of malformed EoGRE packets. An attacker could exploit this vulnerability by sending malicious packets to the affected device. A successful exploit could allow the attacker to cause the device to reload, resulting in a DoS condition. |
| Multiple vulnerabilities in the Control and Provisioning of Wireless Access Points (CAPWAP) protocol processing of Cisco IOS XE Software for Cisco Catalyst 9000 Family Wireless Controllers could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. These vulnerabilities are due to insufficient validation of CAPWAP packets. An attacker could exploit the vulnerabilities by sending a malformed CAPWAP packet to an affected device. A successful exploit could allow the attacker to cause the affected device to crash and reload, resulting in a DoS condition. |
| A vulnerability in the CLI of Cisco IOS XE SD-WAN Software could allow an authenticated, local attacker to execute arbitrary commands with root privileges. The vulnerability is due to insufficient input validation by the system CLI. An attacker could exploit this vulnerability by authenticating to an affected device and submitting crafted input to the system CLI. A successful exploit could allow the attacker to execute commands on the underlying operating system with root privileges. |
| Multiple Cisco products are affected by a vulnerability in the Snort detection engine that could allow an unauthenticated, remote attacker to bypass a configured file policy for HTTP. The vulnerability is due to incorrect handling of specific HTTP header parameters. An attacker could exploit this vulnerability by sending crafted HTTP packets through an affected device. A successful exploit could allow the attacker to bypass a configured file policy for HTTP packets and deliver a malicious payload. |
| A vulnerability in the CLI of Cisco IOS XR Software could allow an authenticated, local attacker to inject arbitrary commands that are executed with root privileges on the underlying Linux operating system (OS) of an affected device. This vulnerability is due to insufficient input validation of commands that are supplied by the user. An attacker could exploit this vulnerability by authenticating to a device and submitting crafted input to an affected command. A successful exploit could allow the attacker to execute commands on the underlying Linux OS with root privileges. |
| A vulnerability in the Cisco IOx Application Framework of Cisco 809 Industrial Integrated Services Routers (Industrial ISRs), Cisco 829 Industrial ISRs, Cisco CGR 1000 Compute Module, and Cisco IC3000 Industrial Compute Gateway could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. This vulnerability is due to insufficient error handling during packet processing. An attacker could exploit this vulnerability by sending a high and sustained rate of crafted TCP traffic to the IOx web server on an affected device. A successful exploit could allow the attacker to cause the IOx web server to stop processing requests, resulting in a DoS condition. |
| Multiple vulnerabilities in the CLI of Cisco IOS XE SD-WAN Software could allow an authenticated, local attacker to access the underlying operating system with root privileges. These vulnerabilities are due to insufficient input validation of certain CLI commands. An attacker could exploit these vulnerabilities by authenticating to the device and submitting crafted input to the CLI. The attacker must be authenticated as an administrative user to execute the affected commands. A successful exploit could allow the attacker to access the underlying operating system with root privileges. |
| A vulnerability in the software image verification functionality of Cisco IOS XE Software for the Cisco Catalyst 9000 Family of switches could allow an unauthenticated, physical attacker to execute unsigned code at system boot time. The vulnerability is due to an improper check in the code function that manages the verification of the digital signatures of system image files during the initial boot process. An attacker could exploit this vulnerability by loading unsigned software on an affected device. A successful exploit could allow the attacker to boot a malicious software image or execute unsigned code and bypass the image verification check part of the secure boot process of an affected device. To exploit this vulnerability, the attacker would need to have unauthenticated physical access to the device or obtain privileged access to the root shell on the device. |
| A vulnerability in the ROM Monitor (ROMMON) of Cisco IOS XE Software for Cisco Catalyst IE3200, IE3300, and IE3400 Rugged Series Switches, Cisco Catalyst IE3400 Heavy Duty Series Switches, and Cisco Embedded Services 3300 Series Switches could allow an unauthenticated, physical attacker to execute unsigned code at system boot time. This vulnerability is due to incorrect validations of specific function arguments passed to a boot script when specific ROMMON variables are set. An attacker could exploit this vulnerability by setting malicious values for a specific ROMMON variable. A successful exploit could allow the attacker to execute unsigned code and bypass the image verification check during the secure boot process of an affected device. To exploit this vulnerability, the attacker would need to have unauthenticated, physical access to the device or obtain privileged access to the root shell on the device. |
| A vulnerability in the Easy Virtual Switching System (VSS) feature of Cisco IOS XE Software for Cisco Catalyst 4500 Series Switches and Cisco Catalyst 4500-X Series Switches could allow an unauthenticated, remote attacker to execute arbitrary code on the underlying Linux operating system of an affected device. The vulnerability is due to incorrect boundary checks of certain values in Easy VSS protocol packets that are destined for an affected device. An attacker could exploit this vulnerability by sending crafted Easy VSS protocol packets to UDP port 5500 while the affected device is in a specific state. When the crafted packet is processed, a buffer overflow condition may occur. A successful exploit could allow the attacker to trigger a denial of service (DoS) condition or execute arbitrary code with root privileges on the underlying Linux operating system of the affected device. |
| A vulnerability in the DNS application layer gateway (ALG) functionality used by Network Address Translation (NAT) in Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause an affected device to reload. The vulnerability is due to a logic error that occurs when an affected device inspects certain DNS packets. An attacker could exploit this vulnerability by sending crafted DNS packets through an affected device that is performing NAT for DNS packets. A successful exploit could allow an attacker to cause the device to reload, resulting in a denial of service (DoS) condition on an affected device. The vulnerability can be exploited only by traffic that is sent through an affected device via IPv4 packets. The vulnerability cannot be exploited via IPv6 traffic. |
| A vulnerability in the web UI of Cisco IOS XE Software could allow an authenticated, remote attacker to execute arbitrary code with root privileges on the underlying operating system of an affected device. The vulnerability exists because the affected software improperly sanitizes values that are parsed from a specific configuration file. An attacker could exploit this vulnerability by tampering with a specific configuration file and then sending an API call. A successful exploit could allow the attacker to inject arbitrary code that would be executed on the underlying operating system of the affected device. To exploit this vulnerability, the attacker would need to have a privileged set of credentials to the device. |
| A vulnerability in a diagnostic command for the Plug-and-Play (PnP) subsystem of Cisco IOS XE Software could allow an authenticated, local attacker to elevate privileges to the level of an Administrator user (level 15) on an affected device. The vulnerability is due to insufficient protection of sensitive information. An attacker with low privileges could exploit this vulnerability by issuing the diagnostic CLI show pnp profile when a specific PnP listener is enabled on the device. A successful exploit could allow the attacker to obtain a privileged authentication token. This token can be used to send crafted PnP messages and execute privileged commands on the targeted system. |
| A vulnerability in the hardware initialization routines of Cisco IOS XE Software for Cisco 1100 Series Industrial Integrated Services Routers and Cisco ESR6300 Embedded Series Routers could allow an authenticated, local attacker to execute unsigned code at system boot time. This vulnerability is due to incorrect validations of parameters passed to a diagnostic script that is executed when the device boots up. An attacker could exploit this vulnerability by tampering with an executable file stored on a device. A successful exploit could allow the attacker to execute unsigned code at boot time and bypass the software image verification check part of the secure boot process of an affected device. To exploit this vulnerability, the attacker would need administrative level credentials (level 15) on the device. |
| A vulnerability in the CLI of Cisco IOS XE SD-WAN Software could allow an authenticated, local attacker to conduct path traversal attacks and obtain read access to sensitive files on an affected system. This vulnerability is due to insufficient validation of user-supplied input. An attacker could exploit this vulnerability by sending a crafted request to an affected system. A successful exploit could allow the attacker to view arbitrary files on the affected system. |
| A vulnerability in the web UI of Cisco IOS XE Software could allow an authenticated, remote attacker to inject arbitrary commands that can be executed as the root user. This vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by sending a crafted request to the web UI of an affected device with arbitrary commands injected into a portion of the request. A successful exploit could allow the attacker to execute arbitrary commands as the root user. |
| A vulnerability in the CLI of Cisco IOS XE SD-WAN Software could allow an authenticated, local attacker to overwrite arbitrary files in the underlying file system. This vulnerability is due to insufficient validation of the parameters of a specific CLI command. An attacker could exploit this vulnerability by issuing that command with specific parameters. A successful exploit could allow the attacker to overwrite the content of any arbitrary file that resides on the underlying host file system. |
| A vulnerability in the vDaemon process in Cisco IOS XE SD-WAN Software could allow an unauthenticated, remote attacker to cause a buffer overflow on an affected device. This vulnerability is due to insufficient bounds checking when the device processes traffic. An attacker could exploit this vulnerability by sending crafted traffic to the device. The attacker must have a man-in-the-middle position between Cisco vManage and an associated device that is running an affected version of Cisco IOS XE SD-WAN Software. An exploit could allow the attacker to conduct a controllable buffer overflow attack (and possibly execute arbitrary commands as the root user) or cause a device reload, resulting in a denial of service (DoS) condition. |
