| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A vulnerability was determined in Duende IdentityServer4 up to 4.1.2. The affected element is an unknown function of the file /connect/authorize of the component Token Renewal Endpoint. This manipulation of the argument id_token_hint causes improper authentication. It is possible to initiate the attack remotely. The attack is considered to have high complexity. The exploitability is described as difficult. This vulnerability only affects products that are no longer supported by the maintainer. |
| In the Linux kernel, the following vulnerability has been resolved:
fs: ntfs3: fix infinite loop triggered by zero-sized ATTR_LIST
We found an infinite loop bug in the ntfs3 file system that can lead to a
Denial-of-Service (DoS) condition.
A malformed NTFS image can cause an infinite loop when an ATTR_LIST attribute
indicates a zero data size while the driver allocates memory for it.
When ntfs_load_attr_list() processes a resident ATTR_LIST with data_size set
to zero, it still allocates memory because of al_aligned(0). This creates an
inconsistent state where ni->attr_list.size is zero, but ni->attr_list.le is
non-null. This causes ni_enum_attr_ex to incorrectly assume that no attribute
list exists and enumerates only the primary MFT record. When it finds
ATTR_LIST, the code reloads it and restarts the enumeration, repeating
indefinitely. The mount operation never completes, hanging the kernel thread.
This patch adds validation to ensure that data_size is non-zero before memory
allocation. When a zero-sized ATTR_LIST is detected, the function returns
-EINVAL, preventing a DoS vulnerability. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/siw: Fix potential NULL pointer dereference in header processing
If siw_get_hdr() returns -EINVAL before set_rx_fpdu_context(),
qp->rx_fpdu can be NULL. The error path in siw_tcp_rx_data()
dereferences qp->rx_fpdu->more_ddp_segs without checking, which
may lead to a NULL pointer deref. Only check more_ddp_segs when
rx_fpdu is present.
KASAN splat:
[ 101.384271] KASAN: null-ptr-deref in range [0x00000000000000c0-0x00000000000000c7]
[ 101.385869] RIP: 0010:siw_tcp_rx_data+0x13ad/0x1e50 |
| In the Linux kernel, the following vulnerability has been resolved:
tcp: secure_seq: add back ports to TS offset
This reverts 28ee1b746f49 ("secure_seq: downgrade to per-host timestamp offsets")
tcp_tw_recycle went away in 2017.
Zhouyan Deng reported off-path TCP source port leakage via
SYN cookie side-channel that can be fixed in multiple ways.
One of them is to bring back TCP ports in TS offset randomization.
As a bonus, we perform a single siphash() computation
to provide both an ISN and a TS offset. |
| In the Linux kernel, the following vulnerability has been resolved:
perf/core: Fix refcount bug and potential UAF in perf_mmap
Syzkaller reported a refcount_t: addition on 0; use-after-free warning
in perf_mmap.
The issue is caused by a race condition between a failing mmap() setup
and a concurrent mmap() on a dependent event (e.g., using output
redirection).
In perf_mmap(), the ring_buffer (rb) is allocated and assigned to
event->rb with the mmap_mutex held. The mutex is then released to
perform map_range().
If map_range() fails, perf_mmap_close() is called to clean up.
However, since the mutex was dropped, another thread attaching to
this event (via inherited events or output redirection) can acquire
the mutex, observe the valid event->rb pointer, and attempt to
increment its reference count. If the cleanup path has already
dropped the reference count to zero, this results in a
use-after-free or refcount saturation warning.
Fix this by extending the scope of mmap_mutex to cover the
map_range() call. This ensures that the ring buffer initialization
and mapping (or cleanup on failure) happens atomically effectively,
preventing other threads from accessing a half-initialized or
dying ring buffer. |
| In the Linux kernel, the following vulnerability has been resolved:
xfs: check return value of xchk_scrub_create_subord
Fix this function to return NULL instead of a mangled ENOMEM, then fix
the callers to actually check for a null pointer and return ENOMEM.
Most of the corrections here are for code merged between 6.2 and 6.10. |
| In the Linux kernel, the following vulnerability has been resolved:
xfs: only call xf{array,blob}_destroy if we have a valid pointer
Only call the xfarray and xfblob destructor if we have a valid pointer,
and be sure to null out that pointer afterwards. Note that this patch
fixes a large number of commits, most of which were merged between 6.9
and 6.10. |
| In the Linux kernel, the following vulnerability has been resolved:
media: dvb-core: fix wrong reinitialization of ringbuffer on reopen
dvb_dvr_open() calls dvb_ringbuffer_init() when a new reader opens the
DVR device. dvb_ringbuffer_init() calls init_waitqueue_head(), which
reinitializes the waitqueue list head to empty.
Since dmxdev->dvr_buffer.queue is a shared waitqueue (all opens of the
same DVR device share it), this orphans any existing waitqueue entries
from io_uring poll or epoll, leaving them with stale prev/next pointers
while the list head is reset to {self, self}.
The waitqueue and spinlock in dvr_buffer are already properly
initialized once in dvb_dmxdev_init(). The open path only needs to
reset the buffer data pointer, size, and read/write positions.
Replace the dvb_ringbuffer_init() call in dvb_dvr_open() with direct
assignment of data/size and a call to dvb_ringbuffer_reset(), which
properly resets pread, pwrite, and error with correct memory ordering
without touching the waitqueue or spinlock. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: fix reservation leak in some error paths when inserting inline extent
If we fail to allocate a path or join a transaction, we return from
__cow_file_range_inline() without freeing the reserved qgroup data,
resulting in a leak. Fix this by ensuring we call btrfs_qgroup_free_data()
in such cases. |
| In the Linux kernel, the following vulnerability has been resolved:
net: liquidio: Initialize netdev pointer before queue setup
In setup_nic_devices(), the netdev is allocated using alloc_etherdev_mq().
However, the pointer to this structure is stored in oct->props[i].netdev
only after the calls to netif_set_real_num_rx_queues() and
netif_set_real_num_tx_queues().
If either of these functions fails, setup_nic_devices() returns an error
without freeing the allocated netdev. Since oct->props[i].netdev is still
NULL at this point, the cleanup function liquidio_destroy_nic_device()
will fail to find and free the netdev, resulting in a memory leak.
Fix this by initializing oct->props[i].netdev before calling the queue
setup functions. This ensures that the netdev is properly accessible for
cleanup in case of errors.
Compile tested only. Issue found using a prototype static analysis tool
and code review. |
| In the Linux kernel, the following vulnerability has been resolved:
gve: Fix stats report corruption on queue count change
The driver and the NIC share a region in memory for stats reporting.
The NIC calculates its offset into this region based on the total size
of the stats region and the size of the NIC's stats.
When the number of queues is changed, the driver's stats region is
resized. If the queue count is increased, the NIC can write past
the end of the allocated stats region, causing memory corruption.
If the queue count is decreased, there is a gap between the driver
and NIC stats, leading to incorrect stats reporting.
This change fixes the issue by allocating stats region with maximum
size, and the offset calculation for NIC stats is changed to match
with the calculation of the NIC. |
| OpenClaw versions prior to 2026.2.24 contain a command injection vulnerability in the system.run shell-wrapper that allows attackers to execute hidden commands by injecting positional argv carriers after inline shell payloads. Attackers can craft misleading approval text while executing arbitrary commands through trailing positional arguments that bypass display context validation. |
| OpenClaw versions prior to 2026.2.23 contain a vulnerability in Twilio webhook event deduplication where normalized event IDs are randomized per parse, allowing replay events to bypass manager dedupe checks. Attackers can replay Twilio webhook events to trigger duplicate or stale call-state transitions, potentially causing incorrect call handling and state corruption. |
| OpenClaw versions prior to 2026.2.25 contain a symlink traversal vulnerability in browser trace and download output path handling that allows local attackers to escape the managed temp root directory. An attacker with local access can create symlinks to route file writes outside the intended temp directory, enabling arbitrary file overwrite on the affected system. |
| OpenClaw versions prior to 2026.2.26 contain a path traversal vulnerability in workspace boundary validation that allows attackers to write files outside the workspace through in-workspace symlinks pointing to non-existent out-of-root targets. The vulnerability exists because the boundary check improperly resolves aliases, permitting the first write operation to escape the workspace boundary and create files in arbitrary locations. |
| OpenClaw versions prior to 2026.2.22 fail to sanitize shell startup environment variables HOME and ZDOTDIR in the system.run function, allowing attackers to bypass command allowlist protections. Remote attackers can inject malicious startup files such as .bash_profile or .zshenv to achieve arbitrary code execution before allowlist-evaluated commands are executed. |
| OpenClaw versions prior to 2026.2.26 contain an approval context-binding weakness in system.run execution flows with host=node that allows reuse of previously approved requests with modified environment variables. Attackers with access to an approval id can exploit this by reusing an approval with changed env input, bypassing execution-integrity controls in approval-enabled workflows. |
| OpenClaw versions prior to 2026.2.21 sandbox browser entrypoint launches x11vnc without authentication for noVNC observer sessions, allowing unauthenticated access to the VNC interface. Remote attackers on the host loopback interface can connect to the exposed noVNC port to observe or interact with the sandbox browser without credentials. |
| File Browser is a file managing interface for uploading, deleting, previewing, renaming, and editing files within a specified directory. In versions 2.61.2 and below, any unauthenticated visitor can register a full administrator account when self-registration (signup = true) is enabled and the default user permissions have perm.admin = true. The signup handler blindly applies all default settings (including Perm.Admin) to the new user without any server-side guard that strips admin from self-registered accounts. The signupHandler is supposed to create unprivileged accounts for new visitors. It contains no explicit user.Perm.Admin = false reset after applying defaults. If an administrator (intentionally or accidentally) configures defaults.perm.admin = true and also enables signup, every account created via the public registration endpoint is an administrator with full control over all files, users, and server settings. This issue has been resolved in version 2.62.0. |
| OpenClaw versions prior to 2026.2.25 contain an approval-integrity bypass vulnerability in system.run where rendered command text is used as approval identity while trimming argv token whitespace, but runtime execution uses raw argv. An attacker can craft a trailing-space executable token to execute a different binary than what the approver displayed, allowing unexpected command execution under the OpenClaw runtime user when they can influence command argv and reuse an approval context. |
