| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
media: chips-media: wave5: Add timeout while stop_streaming
When stop_streaming is called, an infinite loop may occur in some cases.
Add a bounded poll of the queue status: loop until the queues drain,
sleeping briefly between polls, and bail out once VPU_DEC_STOP_TIMEOUT
elapses. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: qla2xxx: Zero dport diagnostics buffer to avoid info leak
qla2x00_do_dport_diagnostics() allocates the qla_dport_diag response
buffer with kmalloc_obj() (non-zeroing) and, on success, copies the full
sizeof(*dd) back to user space via sg_copy_from_buffer(). The inbound
sg_copy_to_buffer() only fills as many bytes as the user request payload
provides, and qla26xx_dport_diagnostics() zeroes only dd->buf. The
options and unused[] fields are therefore copied out uninitialized,
leaking kernel heap contents to user space.
Allocate with kzalloc_obj(), matching qla2x00_do_dport_diagnostics_v2(). |
| In the Linux kernel, the following vulnerability has been resolved:
f2fs: validate MOVE_RANGE destination size
F2FS_IOC_MOVE_RANGE checks the source range, but not the destination end
before updating i_size. A source hole can expose this: __clone_blkaddrs()
skips NULL_ADDR entries and returns success, so the caller can still extend
the destination inode with unchecked pos_out + len.
Reject destination overflow and use inode_newsize_ok() before extending
the destination inode. |
| In the Linux kernel, the following vulnerability has been resolved:
f2fs: limit recovery filename logging to stored length
F2FS stores recovery filenames as a length plus a fixed-size i_name
buffer. The buffer is not NUL-terminated, but recover_inode() and
recover_dentry() print it with %s.
For a 255-byte filename, recovery logging can read past i_name into the
following raw inode fields.
Print the name with a precision bounded by i_namelen and F2FS_NAME_LEN. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: avoid force-completing uninitialized UVD rings
uvd_v7_0_sw_init() does not initialize the UVD decode ring for an
SR-IOV VF. However, amdgpu_uvd_resume() unconditionally force-completes
the decode ring when restoring its fence sequence.
Skip fence completion when the fence driver is not initialized. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/ttm: Drop tt->restore after successful restore
ttm_pool_restore_and_alloc() can successfully complete the restore
process via ttm_pool_restore_commit(), but tt->restore is not dropped
afterward. As a result, subsequent backup/restore flows observe what
appears to be a completed restore, while in reality shmem handles are
still installed in tt->pages, leading to the stack trace below.
Fix this by freeing and dropping tt->restore in
ttm_pool_restore_and_alloc() upon successful completion of the restore.
20545 [ 309.784531] RIP: 0010:sg_alloc_append_table_from_pages+0x38c/0x490
20547 [ 309.809570] RSP: 0018:ffffc9000623b838 EFLAGS: 00010206
20548 [ 309.814827] RAX: 0000000000001000 RBX: ffff88816e42a160 RCX: 0000000000000000
20549 [ 309.821986] RDX: 0000000000002000 RSI: 0000000000000003 RDI: 0000000000001000
20550 [ 309.829147] RBP: ffff88816e42a168 R08: 0000000000000002 R09: 000000007ffff000
20551 [ 309.836310] R10: ffffc9000623b928 R11: 0000000000000000 R12: 000000007ffff000
20552 [ 309.843471] R13: ffff88815ba5a100 R14: 0000000000000000 R15: 0000000000000001
20553 [ 309.850634] FS: 00007f9ff305e700(0000) GS:ffff888276c94000(0000) knlGS:0000000000000000
20554 [ 309.858749] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
20555 [ 309.864519] CR2: 00007f9fca701000 CR3: 00000001565e2005 CR4: 0000000008f70ef0
20556 [ 309.871678] PKRU: 55555558
20557 [ 309.874403] Call Trace:
20558 [ 309.876866] <TASK>
20559 [ 309.878988] sg_alloc_table_from_pages_segment+0x60/0x100
20560 [ 309.884415] ? ttm_resource_manager_usage+0x36/0x60 [ttm]
20561 [ 309.889845] ? xe_tt_map_sg+0x7d/0xd0 [xe]
20562 [ 309.894045] xe_tt_map_sg+0x7d/0xd0 [xe]
20563 [ 309.898037] xe_bo_move+0x927/0xaa0 [xe]
20564 [ 309.902029] ttm_bo_handle_move_mem+0xba/0x170 [ttm]
20565 [ 309.907022] ttm_bo_validate+0xbe/0x190 [ttm]
20566 [ 309.911405] xe_bo_validate+0x9a/0x120 [xe]
20567 [ 309.915663] xe_gpuvm_validate+0xd9/0x140 [xe]
20568 [ 309.920206] drm_gpuvm_validate+0x2f0/0x5b0 [drm_gpuvm]
20569 [ 309.925459] ? drm_exec_lock_obj+0x63/0x210 [drm_exec]
20570 [ 309.930627] xe_vm_validate_rebind+0x46/0xb0 [xe]
20571 [ 309.935428] xe_exec_fn+0x20/0x40 [xe]
20572 [ 309.939249] drm_gpuvm_exec_lock+0x78/0xc0 [drm_gpuvm]
20573 [ 309.944410] xe_validation_exec_lock+0x5a/0xa0 [xe]
20574 [ 309.949385] xe_exec_ioctl+0x806/0xc30 [xe]
20575 [ 309.953639] ? ttwu_queue_wakelist+0xd9/0xf0
20576 [ 309.957935] ? __pfx_xe_exec_fn+0x10/0x10 [xe]
20577 [ 309.962449] ? __wake_up_common+0x73/0xa0
20578 [ 309.966482] ? __pfx_xe_exec_ioctl+0x10/0x10 [xe]
20579 [ 309.971263] drm_ioctl_kernel+0xa3/0x100
20580 [ 309.975209] drm_ioctl+0x213/0x440
20581 [ 309.978637] ? __pfx_xe_exec_ioctl+0x10/0x10 [xe]
20582 [ 309.983415] xe_drm_ioctl+0x67/0xd0 [xe]
20583 [ 309.987408] __x64_sys_ioctl+0x7f/0xd0 |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Disable preemption in bpf_get_stackid
The get_perf_callchain call needs disabled preemption plus we need
it disabled as long as we access its returned trace entries buffer.
Note the bpf_get_stackid_pe function is executed already with
preemption disabled. |
| In the Linux kernel, the following vulnerability has been resolved:
rpcrdma: arm rn_done before publishing the notification
rpcrdma_rn_register() inserts @rn into rd_xa with xa_alloc() before
storing the caller's callback in rn->rn_done. The xarray makes @rn
reachable to rpcrdma_remove_one(), which walks rd_xa and invokes
rn->rn_done(rn) for every registered notification. A device removal
that races a fresh registration can therefore observe @rn with
rn_done still NULL, because the notification objects are zero
allocated by their owners, and call through a NULL function pointer.
Store rn->rn_done before xa_alloc() publishes @rn. The xarray's
store-side and load-side ordering then guarantees that any CPU which
finds @rn in rd_xa also observes the armed callback.
rpcrdma_rn_unregister() treats a non-NULL rn_done as the sentinel
for a completed registration, so the early store must not survive a
failed registration. Clear rn_done again when xa_alloc() fails.
Were it left set, the failed-accept cleanup path would call
rpcrdma_rn_unregister() on an @rn that was never inserted, erasing
an unrelated rd_xa slot and underflowing rd_kref. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/damon/core: avoid infinite kdamond_merge_regions() internal loop
Patch series "mm/damon: unurgent fixes for infinite loop, NULL de-ref and
races", v1.1.
Sashiko found a few issues in DAMON that could cause infinite loop, NULL
dereference and monitoring results degradation. The first two sounds
scary but the infinite loop happens only under unreasonable user setup.
The NULL dereference is only in a unit test. Monitoring results
degradation is trivial since it is only best-effort, and those happens
from only unlikely races. Still those are bugs that better to fix if
possible. Fix those.
This patch (of 6):
Due to online parameter update like events, the number of DAMON regions
could be higher than the user-set upper limit. kdamond_merge_regions()
repeats merge regions until the number meets the limit, while doubling the
merge threshold up to the theoretical maximum threshold. It is tried only
up to the theoretical maximum threshold because even the aggressive
merging can fail from reducing the number of regions under the
user-defined upper limit. For example, there could be many user-defined
non-contiguous regions that cannot be merged.
The threshold based loop break condition is evaluated by comparing the
threshold for the next merging try against the theoretical maximum
threshold. If max_thres is larger than UINT_MAX / 2, doubling the
threshold could make it overflow, and bypass the loop break condition. In
the case, if the number of regions cannot be reduced under the upper limit
like explained above, the loop will run infinitely.
Prevent the case by doing the break condition check before doubling the
threshold. Also, prevent the threshold exceeding the maximum threshold,
as it could overflow and apply the wrong merge threshold.
This issue is unlikely to occur in real world, since having the max_thres
higher than UINT_MAX / 2 require unrealistically large aggregation
intervals compared to the sampling interval. Also, it requires an
unrealistically large number of uncontiguous regions setup. Nonetheless,
the consequence is bad and the fix is simple.
The issue was discovered [1] by Sashiko. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: prevent out-of-bounds reads in share config responses
Validate IPC share configuration payload sizes before consuming
variable-length fields. Bound veto list parsing and account for
the separator byte when deriving the path length. |
| In the Linux kernel, the following vulnerability has been resolved:
KEYS: trusted: Fix TPM teardown ordering
trusted_tpm_exit() drops the TPM chip reference and frees the digest
array before unregistering the trusted key type. key_type_lookup()
holds key_types_sem for reading until the key operation finishes, while
unregister_key_type() takes it for writing. It therefore provides the
synchronization point that must precede backend teardown.
The current order permits this interleaving:
CPU 0 CPU 1
trusted_tpm_exit() key_type_lookup("trusted")
put_device(&chip->dev) trusted_tpm_seal()
kfree(digests) pcrlock()
unregister_key_type() tpm_pcr_extend(..., digests)
CPU 1 can consequently dereference the freed digest array. The chip can
also be released before callbacks stop using it.
KASAN reported:
BUG: KASAN: slab-use-after-free in tpm_pcr_extend+0x1f0/0x200
Read of size 2 at addr ffff88810872d000 by task poc/89
Call Trace:
tpm_pcr_extend+0x1f0/0x200
pcrlock+0x42/0x70 [trusted]
trusted_tpm_seal+0x1b6/0x570 [trusted]
trusted_instantiate+0x293/0x340 [trusted]
__key_instantiate_and_link+0xb2/0x2b0
__key_create_or_update+0x61e/0xb50
__do_sys_add_key+0x1b8/0x310
Allocated by task 88:
__kmalloc_noprof+0x1a7/0x490
do_one_initcall+0xa1/0x390
do_init_module+0x2df/0x840
Freed by task 90:
kfree+0x131/0x3c0
trusted_tpm_exit+0x59/0xa0 [trusted]
__do_sys_delete_module+0x346/0x510
Move unregister_key_type() before releasing either resource. This stops
new lookups and waits for in-flight key operations to finish before the
backend state is destroyed. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/migrate_device: clear stale mapping after freeing swapcache
__migrate_device_pages() reads the folio mapping before calling
folio_free_swap(). When folio_free_swap() succeeds, the folio is removed
from the swap cache, but the saved mapping still points to swap_space.
Passing the stale mapping to folio_migrate_mapping() makes it use the
mapped-folio path for a folio that is no longer in swapcache. It can then
operate on swap_space.i_pages with invalid reference accounting,
eventually triggering a folio reference count BUG.
After a successful split, nr still contains the number of pages in the
original large folio, although each resulting page is now a separate
order-0 folio. Reset nr to 1 so each split folio is processed separately,
including its own swapcache removal and mapping lookup.
Refresh the saved mapping after folio_free_swap() so the current folio
state is used during migration. |
| In the Linux kernel, the following vulnerability has been resolved:
cxl/ras: Fix cxl_rch_get_aer_info() out-of-bounds AER register read
cxl_rch_get_aer_info() copies the RCH Downstream Port AER capability from
the RCRB MMIO block using a readl() loop bounded by sizeof(struct
aer_capability_regs). This struct is a software layout and its embedded
struct pcie_tlp_log is larger than the on-wire AER capability. As a
result the loop reads past the mapped AER register block.
The over-read also populates the software-only tail fields including
header_log.header_len. An out-of-range header_len passed to
pcie_print_tlp_log() can then loop past the header log buffer and cause
a second out-of-bounds read.
The read was correct when introduced, but struct pcie_tlp_log has since
grown (Header Log and TLP Prefix Log sizes, header_len and flit fields),
so sizeof(struct aer_capability_regs) no longer matches the physical AER
capability.
Bound the read to the physical AER registers, header through the 16 byte
Header Log. Zero the destination first so the software-only fields are
deterministic. |
| In the Linux kernel, the following vulnerability has been resolved:
zram: fix out-of-bounds access in read_block_state()
read_block_state() calculates nr_pages before taking dev_lock. If the
device is reset and reinitialized with a smaller disksize before lock
acquisition, nr_pages still describes the old table. The subsequent loop
can then call slot_lock() past the end of the newly allocated table.
Read disksize after acquiring dev_lock and checking that the device is
initialized. The read lock then keeps the table and its bound stable for
the duration of the scan. |
| In the Linux kernel, the following vulnerability has been resolved:
zram: fix out-of-bounds access in writeback_store()
Patch series "zram: fix stale scan bounds after reinitialization".
Both writeback_store() and read_block_state() derive their table scan
bounds from zram->disksize before acquiring dev_lock. If the device is
reset and reinitialized with a smaller disksize between that read and lock
acquisition, the bound can describe the old table while the scan operates
on the new one. This can lead to out-of-bounds slot accesses.
Move both bound calculations under dev_lock so each bound remains
consistent with the table throughout its scan. Keep the fixes separate
because the affected interfaces originate from different commits and can
be backported independently.
This patch (of 2):
writeback_store() calculates the table scan bounds before taking dev_lock.
A reset followed by reconfiguration with a smaller disksize can therefore
replace zram->table while writeback_store() is waiting for the lock. Once
it acquires the lock, it sees an initialized device but scans the new
table using the old upper bound, resulting in an out-of-bounds access.
Calculate the number of pages while holding dev_lock so the scan bound
matches the table protected by the lock. |
| In the Linux kernel, the following vulnerability has been resolved:
zram: set default primary compressor in zram_destroy_comps()
Patch series "zram: fix zram issues reported by sashiko".
Sashiko drove by and reported [1] a couple of zram issues:
a possible BUG_ON() in zlib code due to missing winbits range
validation and one possible NULL-ptr dereference in zcomp.
Both are low risk yet still worth fixing.
This patch (of 2):
zram_destroy_comps() resets all compressors and leaves them set to NULL,
including the primary one, which is invalid device state, as now
comp_algorithm_show()->strcmp() can be called on a NULL compressor. Set
default primary compressor in zram_destroy_comps(). |
| In the Linux kernel, the following vulnerability has been resolved:
nfsd: RCU-protect cl_cb_session to fix use-after-free on session teardown
After a DESTROY_SESSION the per-session teardown path can free a
session while rpciod still holds an inflight callback rpc_task that
dereferences clp->cl_cb_session. nfsd4_probe_callback_sync() flushes
cl_callback_wq, but once nfsd4_run_cb_work() has called
rpc_call_async() the rpc_task lives on rpciod; flushing the workqueue
does not wait for it. rpc_shutdown_client() does drain rpciod tasks,
but uses a 1-second wait_event_timeout — tasks stuck in rpc_delay()
(e.g. 2-second NFS4ERR_DELAY retries) can outlive the drain.
destroy path rpciod
------------ ------
unhash_session(ses)
nfsd4_probe_callback_sync(clp)
flush_workqueue(cl_callback_wq)
/* returns; rpc_task still live */
nfsd4_put_session_locked(ses)
free_session(ses) -> kfree(ses)
nfsd4_cb_sequence_done()
reads cb_clp->cl_cb_session
/* freed slab */
A second window exists in nfsd4_process_cb_update(). When
__nfsd4_find_backchannel() returns NULL because unhash_session() has
already removed the destroyed session from cl_sessions,
setup_callback_client() takes the v4.1 early return so
clp->cl_cb_session = ses never fires and the field retains a pointer
to the about-to-be-freed session.
Fix both by converting cl_cb_session to an RCU-protected pointer:
- Move the cl_cb_session = ses assignment in setup_callback_client()
to after rpc_create() succeeds, so it is only published when a
working backchannel exists. Clear cl_cb_session on the error
return in nfsd4_process_cb_update(). Both stores use
rcu_assign_pointer().
- Annotate cl_cb_session with __rcu. All rpciod-side readers use
rcu_read_lock()/rcu_dereference() and check for NULL, bailing to
the appropriate error or requeue path:
encode_cb_sequence4args(), decode_cb_sequence4resok(),
nfsd41_cb_get_slot(), nfsd41_cb_release_slot(),
nfsd4_cb_prepare(), and nfsd4_cb_sequence_done().
- Switch __free_session() from kfree() to kfree_rcu() so the
session slab is not reclaimed until after an RCU grace period,
guaranteeing that rpciod readers inside rcu_read_lock() never
dereference freed memory.
- Pass the session pointer to the nfsd_cb_seq_status and
nfsd_cb_free_slot tracepoints instead of having them re-read
cl_cb_session.
- nfsd4_cb_prepare() calls rpc_exit() when the session is NULL,
routing through the done/release path to requeue the callback. |
| In the Linux kernel, the following vulnerability has been resolved:
nfsd: validate sockaddr length per family in listener_set
nfsd_sock_nl_policy declares NFSD_A_SOCK_ADDR as a bare NLA_BINARY
attribute with no minimum length. A CAP_NET_ADMIN caller can send a
16-byte NFSD_A_SOCK_ADDR with sa_family=AF_INET6, causing a 12-byte
OOB read across three consumers (rpc_cmp_addr_port, svc_find_listener,
kernel_bind).
nfsd_nl_listener_set_doit() also parsed and validated each listener
entry inline in two separate loops, interleaved with mutating the
running listener configuration. The validation was duplicated, used an
open-coded "nla_len < sizeof(struct sockaddr)" check that was too short
for AF_INET6, and handled a malformed entry inconsistently depending on
which loop noticed it.
Add an nfsd_nl_validate_listeners() helper that walks the entire list
once and confirms each entry parses, carries both an address and a
transport name, and is long enough for its address family
(sizeof(struct sockaddr_in) for AF_INET, sizeof(struct sockaddr_in6)
for AF_INET6, -EAFNOSUPPORT otherwise). Call it before taking
nfsd_mutex or creating the serv, so a malformed request fails cleanly
with no side effects.
Since every entry is known valid by the time the two existing loops
run, drop the redundant presence and per-family length checks from
both, leaving only the nla_parse_nested() call needed to extract the
data. |
| In the Linux kernel, the following vulnerability has been resolved:
nfsd: widen nfsd_genl_rqstp address fields to sockaddr_storage
struct nfsd_genl_rqstp declares rq_daddr and rq_saddr as plain
"struct sockaddr" (16 bytes). When an IPv6 NFS client is connected,
nfsd_genl_rpc_status_compose_msg() casts these fields to
"struct sockaddr_in6 *" (28 bytes) and reads sin6_addr at offset 8..24,
which extends 8 bytes past the end of the 16-byte sockaddr field into
the adjacent rq_flags member. The 16-byte nla_put_in6_addr then ships 8
bytes of truncated IPv6 address followed by 8 bytes of rq_flags to
userspace via the NFSD_A_RPC_STATUS_SADDR6/DADDR6 netlink attributes.
This is reachable by any unprivileged process in the network namespace
because NFSD_CMD_RPC_STATUS_GET uses GENL_CMD_CAP_DUMP without
GENL_ADMIN_PERM.
Fix by widening rq_daddr and rq_saddr to struct sockaddr_storage so the
IPv6 casts operate within bounds, copying sizeof(struct sockaddr_storage)
bytes in the memcpy calls so the full address is captured, and
zero-initializing the genl_rqstp stack variable to prevent leaking
uninitialized tail bytes through netlink. |
| In the Linux kernel, the following vulnerability has been resolved:
nfsd: check nfsd4_acl_to_attr() return value in nfsd4_create()
nfsd4_create() stores the return value of nfsd4_acl_to_attr() in
status, but the switch(create->cr_type) block unconditionally
overwrites it in every branch. ACL translation errors are silently
discarded, and the CREATE proceeds without the requested ACL.
Add an early exit check after nfsd4_acl_to_attr(), matching the
pattern already used in nfsd4_setattr().
[ cel: prefer NFS4ERR_BADTYPE over NFS4ERR_ATTRNOTSUPP ] |
