| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A cross-site request forgery (CSRF) vulnerability has been reported to affect QuLog Center. The remote attackers can then exploit the vulnerability to gain privileges or hijack user identities.
We have already fixed the vulnerability in the following version:
QuLog Center 1.8.2.927 ( 2025/09/17 ) and later |
| It was possible to upload files with a specific name to a temporary directory, which may result in process crashes and impact usability. This flaw can only be exploited after authenticating with an operator- or administrator-privileged service account. |
| A vulnerability was found in 70mai X200 up to 20251019. This issue affects some unknown processing of the component Init Script Handler. The manipulation results in file inclusion. The attack requires a local approach. A high complexity level is associated with this attack. The exploitability is assessed as difficult. The exploit has been made public and could be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| A relative path traversal vulnerability in Fortinet FortiWeb 8.0.0 through 8.0.1, FortiWeb 7.6.0 through 7.6.4, FortiWeb 7.4.0 through 7.4.9, FortiWeb 7.2.0 through 7.2.11, FortiWeb 7.0.0 through 7.0.11 may allow an attacker to execute administrative commands on the system via crafted HTTP or HTTPS requests. |
| In the Linux kernel, the following vulnerability has been resolved:
ftrace: Fix NULL pointer dereference in is_ftrace_trampoline when ftrace is dead
ftrace_startup does not remove ops from ftrace_ops_list when
ftrace_startup_enable fails:
register_ftrace_function
ftrace_startup
__register_ftrace_function
...
add_ftrace_ops(&ftrace_ops_list, ops)
...
...
ftrace_startup_enable // if ftrace failed to modify, ftrace_disabled is set to 1
...
return 0 // ops is in the ftrace_ops_list.
When ftrace_disabled = 1, unregister_ftrace_function simply returns without doing anything:
unregister_ftrace_function
ftrace_shutdown
if (unlikely(ftrace_disabled))
return -ENODEV; // return here, __unregister_ftrace_function is not executed,
// as a result, ops is still in the ftrace_ops_list
__unregister_ftrace_function
...
If ops is dynamically allocated, it will be free later, in this case,
is_ftrace_trampoline accesses NULL pointer:
is_ftrace_trampoline
ftrace_ops_trampoline
do_for_each_ftrace_op(op, ftrace_ops_list) // OOPS! op may be NULL!
Syzkaller reports as follows:
[ 1203.506103] BUG: kernel NULL pointer dereference, address: 000000000000010b
[ 1203.508039] #PF: supervisor read access in kernel mode
[ 1203.508798] #PF: error_code(0x0000) - not-present page
[ 1203.509558] PGD 800000011660b067 P4D 800000011660b067 PUD 130fb8067 PMD 0
[ 1203.510560] Oops: 0000 [#1] SMP KASAN PTI
[ 1203.511189] CPU: 6 PID: 29532 Comm: syz-executor.2 Tainted: G B W 5.10.0 #8
[ 1203.512324] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014
[ 1203.513895] RIP: 0010:is_ftrace_trampoline+0x26/0xb0
[ 1203.514644] Code: ff eb d3 90 41 55 41 54 49 89 fc 55 53 e8 f2 00 fd ff 48 8b 1d 3b 35 5d 03 e8 e6 00 fd ff 48 8d bb 90 00 00 00 e8 2a 81 26 00 <48> 8b ab 90 00 00 00 48 85 ed 74 1d e8 c9 00 fd ff 48 8d bb 98 00
[ 1203.518838] RSP: 0018:ffffc900012cf960 EFLAGS: 00010246
[ 1203.520092] RAX: 0000000000000000 RBX: 000000000000007b RCX: ffffffff8a331866
[ 1203.521469] RDX: 0000000000000000 RSI: 0000000000000008 RDI: 000000000000010b
[ 1203.522583] RBP: 0000000000000000 R08: 0000000000000000 R09: ffffffff8df18b07
[ 1203.523550] R10: fffffbfff1be3160 R11: 0000000000000001 R12: 0000000000478399
[ 1203.524596] R13: 0000000000000000 R14: ffff888145088000 R15: 0000000000000008
[ 1203.525634] FS: 00007f429f5f4700(0000) GS:ffff8881daf00000(0000) knlGS:0000000000000000
[ 1203.526801] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 1203.527626] CR2: 000000000000010b CR3: 0000000170e1e001 CR4: 00000000003706e0
[ 1203.528611] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 1203.529605] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Therefore, when ftrace_startup_enable fails, we need to rollback registration
process and remove ops from ftrace_ops_list. |
| In the Linux kernel, the following vulnerability has been resolved:
fbdev: fb_pm2fb: Avoid potential divide by zero error
In `do_fb_ioctl()` of fbmem.c, if cmd is FBIOPUT_VSCREENINFO, var will be
copied from user, then go through `fb_set_var()` and
`info->fbops->fb_check_var()` which could may be `pm2fb_check_var()`.
Along the path, `var->pixclock` won't be modified. This function checks
whether reciprocal of `var->pixclock` is too high. If `var->pixclock` is
zero, there will be a divide by zero error. So, it is necessary to check
whether denominator is zero to avoid crash. As this bug is found by
Syzkaller, logs are listed below.
divide error in pm2fb_check_var
Call Trace:
<TASK>
fb_set_var+0x367/0xeb0 drivers/video/fbdev/core/fbmem.c:1015
do_fb_ioctl+0x234/0x670 drivers/video/fbdev/core/fbmem.c:1110
fb_ioctl+0xdd/0x130 drivers/video/fbdev/core/fbmem.c:1189 |
| Evervault is a payment security solution. A vulnerability was identified in the `evervault-go` SDK’s attestation verification logic in versions of `evervault-go` prior to 1.3.2 that may allow incomplete documents to pass validation. This may cause the client to trust an enclave operator that does not meet expected integrity guarantees. The exploitability of this issue is limited in Evervault-hosted environments as an attacker would require the pre-requisite ability to serve requests from specific evervault domain names, following from our ACME challenge based TLS certificate acquisition pipeline. The vulnerability primarily affects applications which only check PCR8. Though the efficacy is also reduced for applications that check all PCR values, the impact is largely remediated by checking PCR 0, 1 and 2. The identified issue has been addressed in version 1.3.2 by validating attestation documents before storing in the cache, and replacing the naive equality checks with a new SatisfiedBy check. Those who useevervault-go to attest Enclaves that are hosted outside of Evervault environments and cannot upgrade have two possible workarounds available. Modify the application logic to fail verification if PCR8 is not explicitly present and non-empty and/or add custom pre-validation to reject documents that omit any required PCRs. |
| CKFinder 1.4.3 is vulnerable to Cross Site Scripting (XSS) in the File Upload function. An attacker can upload a crafted SVG containing active content. |
| Reflected Cross-Site Scripting (XSS) vulnerability in SVX Portal 2.7A via the id parameter to Recivers.php. |
| A stack buffer overflow vulnerability exists in the D-Link DIR-816A2 router firmware DIR-816A2_FWv1.10CNB05_R1B011D88210.img in the upload.cgi module, which handles firmware version information. The vulnerability occurs because /proc/version is read into a 512-byte buffer and then concatenated using sprintf() into another 512-byte buffer containing a 29-byte constant. Input exceeding 481 bytes triggers a stack buffer overflow, allowing an attacker who can control /proc/version content to potentially execute arbitrary code on the device. |
| A stack buffer overflow vulnerability exists in the D-Link DIR-878A1 router firmware FW101B04.bin in the rc binary's USB storage handling module. The vulnerability occurs when the "Serial Number" field from a USB device is read via sscanf into a 64-byte stack buffer, while fgets reads up to 127 bytes, causing a stack overflow. An attacker with physical access or control over a USB device can exploit this vulnerability to potentially execute arbitrary code on the device. |
| A command injection vulnerability exists in the D-Link DIR-823G router firmware DIR823G_V1.0.2B05_20181207.bin in the timelycheck and sysconf binaries, which process the /var/system/linux_vlan_reinit file. The vulnerability occurs because content read from this file is only partially validated for a prefix and then formatted using vsnprintf() before being executed with system(), allowing an attacker with write access to /var/system/linux_vlan_reinit to execute arbitrary commands on the device. |
| A vulnerability was found in Alaga Home Security WiFi Camera 3K (model S-CW2503C-H) with hardware version V03 and firmware version 1.4.2, which allows physical attackers to execute commands as root via script file with a specific name on a SD card. |
| A Server-side Request Forgery vulnerability was found in the Application Server of Desktop Alert PingAlert version 6.1.0.11 to 6.1.1.2 which allows Probing of internal infrastructure. |
| An issue was found in the Application Server of Desktop Alert PingAlert version 6.1.0.11 to 6.1.1.2 which allows remote Path Traversal for loading arbitrary external content. |
| A Reflected Cross Site Scripting (XSS) vulnerability was found in the Application Server of Desktop Alert PingAlert version 6.1.0.11 to 6.1.1.2 which allows an attacker to hijack user’s browser, capturing sensitive information. |
| An issue was found in the Application Server of Desktop Alert PingAlert version 6.1.0.11 to 6.1.1.2. Sensitive Information is exposed to an Unauthorized Actor. |
| A sensitive information disclosure vulnerability in Palo Alto Networks Prisma® Browser allows a locally authenticated non-admin user to retrieve sensitive data from Prisma Browser.
Browser self-protection should be enabled to mitigate this issue. |
| Keyfactor SignServer before 7.3.1 has Incorrect Access Control, issue 2 of 3. |
| Keyfactor SignServer before 7.3.1 has Incorrect Access Control, issue 1 of 3. |
