| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
fs/ntfs3: Validate BOOT record_size
When the NTFS BOOT record_size field < 0, it represents a
shift value. However, there is no sanity check on the shift result
and the sbi->record_bits calculation through blksize_bits() assumes
the size always > 256, which could lead to NPD while mounting a
malformed NTFS image.
[ 318.675159] BUG: kernel NULL pointer dereference, address: 0000000000000158
[ 318.675682] #PF: supervisor read access in kernel mode
[ 318.675869] #PF: error_code(0x0000) - not-present page
[ 318.676246] PGD 0 P4D 0
[ 318.676502] Oops: 0000 [#1] PREEMPT SMP NOPTI
[ 318.676934] CPU: 0 PID: 259 Comm: mount Not tainted 5.19.0 #5
[ 318.677289] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014
[ 318.678136] RIP: 0010:ni_find_attr+0x2d/0x1c0
[ 318.678656] Code: 89 ca 4d 89 c7 41 56 41 55 41 54 41 89 cc 55 48 89 fd 53 48 89 d3 48 83 ec 20 65 48 8b 04 25 28 00 00 00 48 89 44 24 180
[ 318.679848] RSP: 0018:ffffa6c8c0297bd8 EFLAGS: 00000246
[ 318.680104] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000080
[ 318.680790] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000
[ 318.681679] RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000
[ 318.682577] R10: 0000000000000000 R11: 0000000000000005 R12: 0000000000000080
[ 318.683015] R13: ffff8d5582e68400 R14: 0000000000000100 R15: 0000000000000000
[ 318.683618] FS: 00007fd9e1c81e40(0000) GS:ffff8d55fdc00000(0000) knlGS:0000000000000000
[ 318.684280] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 318.684651] CR2: 0000000000000158 CR3: 0000000002e1a000 CR4: 00000000000006f0
[ 318.685623] Call Trace:
[ 318.686607] <TASK>
[ 318.686872] ? ntfs_alloc_inode+0x1a/0x60
[ 318.687235] attr_load_runs_vcn+0x2b/0xa0
[ 318.687468] mi_read+0xbb/0x250
[ 318.687576] ntfs_iget5+0x114/0xd90
[ 318.687750] ntfs_fill_super+0x588/0x11b0
[ 318.687953] ? put_ntfs+0x130/0x130
[ 318.688065] ? snprintf+0x49/0x70
[ 318.688164] ? put_ntfs+0x130/0x130
[ 318.688256] get_tree_bdev+0x16a/0x260
[ 318.688407] vfs_get_tree+0x20/0xb0
[ 318.688519] path_mount+0x2dc/0x9b0
[ 318.688877] do_mount+0x74/0x90
[ 318.689142] __x64_sys_mount+0x89/0xd0
[ 318.689636] do_syscall_64+0x3b/0x90
[ 318.689998] entry_SYSCALL_64_after_hwframe+0x63/0xcd
[ 318.690318] RIP: 0033:0x7fd9e133c48a
[ 318.690687] Code: 48 8b 0d 11 fa 2a 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 49 89 ca b8 a5 00 00 008
[ 318.691357] RSP: 002b:00007ffd374406c8 EFLAGS: 00000202 ORIG_RAX: 00000000000000a5
[ 318.691632] RAX: ffffffffffffffda RBX: 0000564d0b051080 RCX: 00007fd9e133c48a
[ 318.691920] RDX: 0000564d0b051280 RSI: 0000564d0b051300 RDI: 0000564d0b0596a0
[ 318.692123] RBP: 0000000000000000 R08: 0000564d0b0512a0 R09: 0000000000000020
[ 318.692349] R10: 00000000c0ed0000 R11: 0000000000000202 R12: 0000564d0b0596a0
[ 318.692673] R13: 0000564d0b051280 R14: 0000000000000000 R15: 00000000ffffffff
[ 318.693007] </TASK>
[ 318.693271] Modules linked in:
[ 318.693614] CR2: 0000000000000158
[ 318.694446] ---[ end trace 0000000000000000 ]---
[ 318.694779] RIP: 0010:ni_find_attr+0x2d/0x1c0
[ 318.694952] Code: 89 ca 4d 89 c7 41 56 41 55 41 54 41 89 cc 55 48 89 fd 53 48 89 d3 48 83 ec 20 65 48 8b 04 25 28 00 00 00 48 89 44 24 180
[ 318.696042] RSP: 0018:ffffa6c8c0297bd8 EFLAGS: 00000246
[ 318.696531] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000080
[ 318.698114] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000
[ 318.699286] RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000
[ 318.699795] R10: 0000000000000000 R11: 0000000000000005 R12: 0000000000000080
[ 318.700236] R13: ffff8d5582e68400 R14: 0000000000000100 R15: 0000000000000000
[ 318.700973] FS: 00007fd9e1c81e40(0000) GS:ffff8d55fdc00000(0000) knlGS:0000000000000000
[
---truncated--- |
| Dreamweaver Desktop versions 21.5 and earlier are affected by a Cross-Site Request Forgery (CSRF) vulnerability that could result in arbitrary code execution in the context of the current user. Exploitation of this issue requires user interaction in that a victim must click on a malicious link, and scope is changed. |
| Acrobat Reader versions 24.001.30254, 20.005.30774, 25.001.20672 and earlier are affected by a Violation of Secure Design Principles vulnerability that could result in a security feature bypass. Exploitation of this issue does not require user interaction, and scope is unchanged. |
| Acrobat Reader versions 24.001.30254, 20.005.30774, 25.001.20672 and earlier are affected by a Use After Free vulnerability that could result in arbitrary code execution in the context of the current user. Exploitation of this issue requires user interaction in that a victim must open a malicious file, and scope is unchanged. |
| A vulnerability, which was classified as problematic, has been found in Vinades NukeViet up to 4.5.06. This issue affects some unknown processing of the file /admin/index.php?language=en&nv=upload of the component Module Handler. The manipulation leads to server-side request forgery. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| A path traversal vulnerability affecting the Windows version of WinRAR allows the attackers to execute arbitrary code by crafting malicious archive files. This vulnerability was exploited in the wild and was discovered by Anton Cherepanov, Peter Košinár, and Peter Strýček
from ESET. |
| feiskyer mcp-kubernetes-server through 0.1.11 allows OS command injection, even in read-only mode, via /mcp/kubectl because shell=True is used. NOTE: this is unrelated to mcp-server-kubernetes and CVE-2025-53355. |
| feiskyer mcp-kubernetes-server through 0.1.11 does not consider chained commands in the implementation of --disable-write and --disable-delete, e.g., it allows a "kubectl version; kubectl delete pod" command because the first word (i.e., "version") is not a write or delete operation. |
| A Cross-Site Request Forgery (CSRF) vulnerability was identified in the Profile Page of the PHPGurukul Student-Result-Management-System-Using-PHP-V2.0. This flaw allows an attacker to trick authenticated users into unintentionally modifying their account details. By crafting a malicious HTML page, an attacker can submit unauthorized requests to the vulnerable endpoint: /create-class.php. |
| An issue was discovered in the method push.lite.avtech.com.AvtechLib.GetHttpsResponse in AVTECH EagleEyes Lite 2.0.0, the GetHttpsResponse method transmits sensitive information - including internal server URLs, account IDs, passwords, and device tokens - as plaintext query parameters over HTTPS |
| An issue was discovered in the methods push.lite.avtech.com.AvtechLib.GetHttpsResponse and push.lite.avtech.com.Push_HttpService.getNewHttpClient in AVTECH EagleEyes 2.0.0. The methods set ALLOW_ALL_HOSTNAME_VERIFIER, bypassing domain validation. |
| A flaw has been found in Campcodes Online Job Finder System 1.0. This affects an unknown function of the file /index.php?q=result&searchfor=bycompany. This manipulation of the argument Search causes sql injection. The attack can be initiated remotely. The exploit has been published and may be used. |
| A vulnerability was detected in Campcodes Online Job Finder System 1.0. The impacted element is an unknown function of the file /eris/applicationform.php. The manipulation of the argument picture results in unrestricted upload. It is possible to launch the attack remotely. The exploit is now public and may be used. |
| gpac v2.2.1 (fixed in v2.4.0) was discovered to contain a memory leak via the gfio_blob variable in the gf_fileio_from_blob function. |
| In the Linux kernel, the following vulnerability has been resolved:
raw: Fix NULL deref in raw_get_next().
Dae R. Jeong reported a NULL deref in raw_get_next() [0].
It seems that the repro was running these sequences in parallel so
that one thread was iterating on a socket that was being freed in
another netns.
unshare(0x40060200)
r0 = syz_open_procfs(0x0, &(0x7f0000002080)='net/raw\x00')
socket$inet_icmp_raw(0x2, 0x3, 0x1)
pread64(r0, &(0x7f0000000000)=""/10, 0xa, 0x10000000007f)
After commit 0daf07e52709 ("raw: convert raw sockets to RCU"), we
use RCU and hlist_nulls_for_each_entry() to iterate over SOCK_RAW
sockets. However, we should use spinlock for slow paths to avoid
the NULL deref.
Also, SOCK_RAW does not use SLAB_TYPESAFE_BY_RCU, and the slab object
is not reused during iteration in the grace period. In fact, the
lockless readers do not check the nulls marker with get_nulls_value().
So, SOCK_RAW should use hlist instead of hlist_nulls.
Instead of adding an unnecessary barrier by sk_nulls_for_each_rcu(),
let's convert hlist_nulls to hlist and use sk_for_each_rcu() for
fast paths and sk_for_each() and spinlock for /proc/net/raw.
[0]:
general protection fault, probably for non-canonical address 0xdffffc0000000005: 0000 [#1] PREEMPT SMP KASAN
KASAN: null-ptr-deref in range [0x0000000000000028-0x000000000000002f]
CPU: 2 PID: 20952 Comm: syz-executor.0 Not tainted 6.2.0-g048ec869bafd-dirty #7
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014
RIP: 0010:read_pnet include/net/net_namespace.h:383 [inline]
RIP: 0010:sock_net include/net/sock.h:649 [inline]
RIP: 0010:raw_get_next net/ipv4/raw.c:974 [inline]
RIP: 0010:raw_get_idx net/ipv4/raw.c:986 [inline]
RIP: 0010:raw_seq_start+0x431/0x800 net/ipv4/raw.c:995
Code: ef e8 33 3d 94 f7 49 8b 6d 00 4c 89 ef e8 b7 65 5f f7 49 89 ed 49 83 c5 98 0f 84 9a 00 00 00 48 83 c5 c8 48 89 e8 48 c1 e8 03 <42> 80 3c 30 00 74 08 48 89 ef e8 00 3d 94 f7 4c 8b 7d 00 48 89 ef
RSP: 0018:ffffc9001154f9b0 EFLAGS: 00010206
RAX: 0000000000000005 RBX: 1ffff1100302c8fd RCX: 0000000000000000
RDX: 0000000000000028 RSI: ffffc9001154f988 RDI: ffffc9000f77a338
RBP: 0000000000000029 R08: ffffffff8a50ffb4 R09: fffffbfff24b6bd9
R10: fffffbfff24b6bd9 R11: 0000000000000000 R12: ffff88801db73b78
R13: fffffffffffffff9 R14: dffffc0000000000 R15: 0000000000000030
FS: 00007f843ae8e700(0000) GS:ffff888063700000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000055bb9614b35f CR3: 000000003c672000 CR4: 00000000003506e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
seq_read_iter+0x4c6/0x10f0 fs/seq_file.c:225
seq_read+0x224/0x320 fs/seq_file.c:162
pde_read fs/proc/inode.c:316 [inline]
proc_reg_read+0x23f/0x330 fs/proc/inode.c:328
vfs_read+0x31e/0xd30 fs/read_write.c:468
ksys_pread64 fs/read_write.c:665 [inline]
__do_sys_pread64 fs/read_write.c:675 [inline]
__se_sys_pread64 fs/read_write.c:672 [inline]
__x64_sys_pread64+0x1e9/0x280 fs/read_write.c:672
do_syscall_x64 arch/x86/entry/common.c:51 [inline]
do_syscall_64+0x4e/0xa0 arch/x86/entry/common.c:82
entry_SYSCALL_64_after_hwframe+0x63/0xcd
RIP: 0033:0x478d29
Code: f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007f843ae8dbe8 EFLAGS: 00000246 ORIG_RAX: 0000000000000011
RAX: ffffffffffffffda RBX: 0000000000791408 RCX: 0000000000478d29
RDX: 000000000000000a RSI: 0000000020000000 RDI: 0000000000000003
RBP: 00000000f477909a R08: 0000000000000000 R09: 0000000000000000
R10: 000010000000007f R11: 0000000000000246 R12: 0000000000791740
R13: 0000000000791414 R14: 0000000000791408 R15: 00007ffc2eb48a50
</TASK>
Modules linked in:
---[ end trace 0000000000000000 ]---
RIP: 0010
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
USB: uhci: fix memory leak with using debugfs_lookup()
When calling debugfs_lookup() the result must have dput() called on it,
otherwise the memory will leak over time. To make things simpler, just
call debugfs_lookup_and_remove() instead which handles all of the logic
at once. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: dwc3: qcom: Fix potential memory leak
Function dwc3_qcom_probe() allocates memory for resource structure
which is pointed by parent_res pointer. This memory is not
freed. This leads to memory leak. Use stack memory to prevent
memory leak.
Found by Linux Verification Center (linuxtesting.org) with SVACE. |
| In the Linux kernel, the following vulnerability has been resolved:
mlxsw: minimal: fix potential memory leak in mlxsw_m_linecards_init
The line cards array is not freed in the error path of
mlxsw_m_linecards_init(), which can lead to a memory leak. Fix by
freeing the array in the error path, thereby making the error path
identical to mlxsw_m_linecards_fini(). |
| In the Linux kernel, the following vulnerability has been resolved:
fs/ntfs3: Add length check in indx_get_root
This adds a length check to guarantee the retrieved index root is legit.
[ 162.459513] BUG: KASAN: use-after-free in hdr_find_e.isra.0+0x10c/0x320
[ 162.460176] Read of size 2 at addr ffff8880037bca99 by task mount/243
[ 162.460851]
[ 162.461252] CPU: 0 PID: 243 Comm: mount Not tainted 6.0.0-rc7 #42
[ 162.461744] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014
[ 162.462609] Call Trace:
[ 162.462954] <TASK>
[ 162.463276] dump_stack_lvl+0x49/0x63
[ 162.463822] print_report.cold+0xf5/0x689
[ 162.464608] ? unwind_get_return_address+0x3a/0x60
[ 162.465766] ? hdr_find_e.isra.0+0x10c/0x320
[ 162.466975] kasan_report+0xa7/0x130
[ 162.467506] ? _raw_spin_lock_irq+0xc0/0xf0
[ 162.467998] ? hdr_find_e.isra.0+0x10c/0x320
[ 162.468536] __asan_load2+0x68/0x90
[ 162.468923] hdr_find_e.isra.0+0x10c/0x320
[ 162.469282] ? cmp_uints+0xe0/0xe0
[ 162.469557] ? cmp_sdh+0x90/0x90
[ 162.469864] ? ni_find_attr+0x214/0x300
[ 162.470217] ? ni_load_mi+0x80/0x80
[ 162.470479] ? entry_SYSCALL_64_after_hwframe+0x63/0xcd
[ 162.470931] ? ntfs_bread_run+0x190/0x190
[ 162.471307] ? indx_get_root+0xe4/0x190
[ 162.471556] ? indx_get_root+0x140/0x190
[ 162.471833] ? indx_init+0x1e0/0x1e0
[ 162.472069] ? fnd_clear+0x115/0x140
[ 162.472363] ? _raw_spin_lock_irqsave+0x100/0x100
[ 162.472731] indx_find+0x184/0x470
[ 162.473461] ? sysvec_apic_timer_interrupt+0x57/0xc0
[ 162.474429] ? indx_find_buffer+0x2d0/0x2d0
[ 162.474704] ? do_syscall_64+0x3b/0x90
[ 162.474962] dir_search_u+0x196/0x2f0
[ 162.475381] ? ntfs_nls_to_utf16+0x450/0x450
[ 162.475661] ? ntfs_security_init+0x3d6/0x440
[ 162.475906] ? is_sd_valid+0x180/0x180
[ 162.476191] ntfs_extend_init+0x13f/0x2c0
[ 162.476496] ? ntfs_fix_post_read+0x130/0x130
[ 162.476861] ? iput.part.0+0x286/0x320
[ 162.477325] ntfs_fill_super+0x11e0/0x1b50
[ 162.477709] ? put_ntfs+0x1d0/0x1d0
[ 162.477970] ? vsprintf+0x20/0x20
[ 162.478258] ? set_blocksize+0x95/0x150
[ 162.478538] get_tree_bdev+0x232/0x370
[ 162.478789] ? put_ntfs+0x1d0/0x1d0
[ 162.479038] ntfs_fs_get_tree+0x15/0x20
[ 162.479374] vfs_get_tree+0x4c/0x130
[ 162.479729] path_mount+0x654/0xfe0
[ 162.480124] ? putname+0x80/0xa0
[ 162.480484] ? finish_automount+0x2e0/0x2e0
[ 162.480894] ? putname+0x80/0xa0
[ 162.481467] ? kmem_cache_free+0x1c4/0x440
[ 162.482280] ? putname+0x80/0xa0
[ 162.482714] do_mount+0xd6/0xf0
[ 162.483264] ? path_mount+0xfe0/0xfe0
[ 162.484782] ? __kasan_check_write+0x14/0x20
[ 162.485593] __x64_sys_mount+0xca/0x110
[ 162.486024] do_syscall_64+0x3b/0x90
[ 162.486543] entry_SYSCALL_64_after_hwframe+0x63/0xcd
[ 162.487141] RIP: 0033:0x7f9d374e948a
[ 162.488324] Code: 48 8b 0d 11 fa 2a 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 49 89 ca b8 a5 00 00 008
[ 162.489728] RSP: 002b:00007ffe30e73d18 EFLAGS: 00000206 ORIG_RAX: 00000000000000a5
[ 162.490971] RAX: ffffffffffffffda RBX: 0000561cdb43a060 RCX: 00007f9d374e948a
[ 162.491669] RDX: 0000561cdb43a260 RSI: 0000561cdb43a2e0 RDI: 0000561cdb442af0
[ 162.492050] RBP: 0000000000000000 R08: 0000561cdb43a280 R09: 0000000000000020
[ 162.492459] R10: 00000000c0ed0000 R11: 0000000000000206 R12: 0000561cdb442af0
[ 162.493183] R13: 0000561cdb43a260 R14: 0000000000000000 R15: 00000000ffffffff
[ 162.493644] </TASK>
[ 162.493908]
[ 162.494214] The buggy address belongs to the physical page:
[ 162.494761] page:000000003e38a3d5 refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x37bc
[ 162.496064] flags: 0xfffffc0000000(node=0|zone=1|lastcpupid=0x1fffff)
[ 162.497278] raw: 000fffffc0000000 ffffea00000df1c8 ffffea00000df008 0000000000000000
[ 162.498928] raw: 0000000000000000 0000000000240000 00000000ffffffff 0000000000000000
[ 162.500542] page dumped becau
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: fix amdgpu_irq_put call trace in gmc_v10_0_hw_fini
The gmc.ecc_irq is enabled by firmware per IFWI setting,
and the host driver is not privileged to enable/disable
the interrupt. So, it is meaningless to use the amdgpu_irq_put
function in gmc_v10_0_hw_fini, which also leads to the call
trace.
[ 82.340264] Call Trace:
[ 82.340265] <TASK>
[ 82.340269] gmc_v10_0_hw_fini+0x83/0xa0 [amdgpu]
[ 82.340447] gmc_v10_0_suspend+0xe/0x20 [amdgpu]
[ 82.340623] amdgpu_device_ip_suspend_phase2+0x127/0x1c0 [amdgpu]
[ 82.340789] amdgpu_device_ip_suspend+0x3d/0x80 [amdgpu]
[ 82.340955] amdgpu_device_pre_asic_reset+0xdd/0x2b0 [amdgpu]
[ 82.341122] amdgpu_device_gpu_recover.cold+0x4dd/0xbb2 [amdgpu]
[ 82.341359] amdgpu_debugfs_reset_work+0x4c/0x70 [amdgpu]
[ 82.341529] process_one_work+0x21d/0x3f0
[ 82.341535] worker_thread+0x1fa/0x3c0
[ 82.341538] ? process_one_work+0x3f0/0x3f0
[ 82.341540] kthread+0xff/0x130
[ 82.341544] ? kthread_complete_and_exit+0x20/0x20
[ 82.341547] ret_from_fork+0x22/0x30 |
