| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| This issue was addressed through improved state management. This issue is fixed in iOS 17.7 and iPadOS 17.7, iOS 18 and iPadOS 18. Private Browsing tabs may be accessed without authentication. |
| Cacti provides an operational monitoring and fault management framework. Prior to version 1.2.27, Cacti calls `compat_password_hash` when users set their password. `compat_password_hash` use `password_hash` if there is it, else use `md5`. When verifying password, it calls `compat_password_verify`. In `compat_password_verify`, `password_verify` is called if there is it, else use `md5`. `password_verify` and `password_hash` are supported on PHP < 5.5.0, following PHP manual. The vulnerability is in `compat_password_verify`. Md5-hashed user input is compared with correct password in database by `$md5 == $hash`. It is a loose comparison, not `===`. It is a type juggling vulnerability. Version 1.2.27 contains a patch for the issue. |
| IBM Data Risk Manager 2.0.1, 2.0.2, 2.0.3, 2.0.4, 2.0.5, and 2.0.6 could allow a remote attacker to bypass security restrictions when configured with SAML authentication. By sending a specially crafted HTTP request, an attacker could exploit this vulnerability to bypass the authentication process and gain full administrative access to the system. IBM X-Force ID: 180532. |
| In Apache httpd 2.2.x before 2.2.33 and 2.4.x before 2.4.26, use of the ap_get_basic_auth_pw() by third-party modules outside of the authentication phase may lead to authentication requirements being bypassed. |
| Dell Storage Center - Dell Storage Manager, version(s) 20.1.21, contain(s) an Improper Authentication vulnerability. An unauthenticated attacker with remote access could potentially exploit this vulnerability, leading to Protection mechanism bypass. Authentication Bypass in DSM Data Collector. An unauthenticated remote attacker can access APIs exposed by ApiProxy.war in DataCollectorEar.ear by using a special SessionKey and UserId. These userid are special users created in compellentservicesapi for special purposes. |
| Starting from 2.53.6, 2.54.3, and 2.55.0, Zitadel only required multi factor authentication in case the login policy has either enabled requireMFA or requireMFAForLocalUsers. If a user has set up MFA without this requirement, Zitadel would consider single factor auhtenticated sessions as valid as well and not require multiple factors. Bypassing second authentication factors weakens multifactor authentication and enables attackers to bypass the more secure factor. An attacker can target the TOTP code alone, only six digits, bypassing password verification entirely and potentially compromising accounts with 2FA enabled. This vulnerability is fixed in 4.6.0, 3.4.3, and 2.71.18. |
| In the Linux kernel, the following vulnerability has been resolved:
smack: tcp: ipv4, fix incorrect labeling
Currently, Smack mirrors the label of incoming tcp/ipv4 connections:
when a label 'foo' connects to a label 'bar' with tcp/ipv4,
'foo' always gets 'foo' in returned ipv4 packets. So,
1) returned packets are incorrectly labeled ('foo' instead of 'bar')
2) 'bar' can write to 'foo' without being authorized to write.
Here is a scenario how to see this:
* Take two machines, let's call them C and S,
with active Smack in the default state
(no settings, no rules, no labeled hosts, only builtin labels)
* At S, add Smack rule 'foo bar w'
(labels 'foo' and 'bar' are instantiated at S at this moment)
* At S, at label 'bar', launch a program
that listens for incoming tcp/ipv4 connections
* From C, at label 'foo', connect to the listener at S.
(label 'foo' is instantiated at C at this moment)
Connection succeedes and works.
* Send some data in both directions.
* Collect network traffic of this connection.
All packets in both directions are labeled with the CIPSO
of the label 'foo'. Hence, label 'bar' writes to 'foo' without
being authorized, and even without ever being known at C.
If anybody cares: exactly the same happens with DCCP.
This behavior 1st manifested in release 2.6.29.4 (see Fixes below)
and it looks unintentional. At least, no explanation was provided.
I changed returned packes label into the 'bar',
to bring it into line with the Smack documentation claims. |
| In the Linux kernel, the following vulnerability has been resolved:
selinux,smack: don't bypass permissions check in inode_setsecctx hook
Marek Gresko reports that the root user on an NFS client is able to
change the security labels on files on an NFS filesystem that is
exported with root squashing enabled.
The end of the kerneldoc comment for __vfs_setxattr_noperm() states:
* This function requires the caller to lock the inode's i_mutex before it
* is executed. It also assumes that the caller will make the appropriate
* permission checks.
nfsd_setattr() does do permissions checking via fh_verify() and
nfsd_permission(), but those don't do all the same permissions checks
that are done by security_inode_setxattr() and its related LSM hooks do.
Since nfsd_setattr() is the only consumer of security_inode_setsecctx(),
simplest solution appears to be to replace the call to
__vfs_setxattr_noperm() with a call to __vfs_setxattr_locked(). This
fixes the above issue and has the added benefit of causing nfsd to
recall conflicting delegations on a file when a client tries to change
its security label. |
| A logic issue was addressed with improved state management. This issue is fixed in visionOS 2.4, macOS Ventura 13.7.5, tvOS 18.4, iPadOS 17.7.6, iOS 18.4 and iPadOS 18.4, macOS Sonoma 14.7.5. A malicious app may be able to attempt passcode entries on a locked device and thereby cause escalating time delays after 4 failures. |
| This issue was addressed through improved state management. This issue is fixed in visionOS 2.4, iOS 18.4 and iPadOS 18.4, macOS Sequoia 15.4. Password autofill may fill in passwords after failing authentication. |
| Once an user is authenticated on Jolokia, he can potentially trigger arbitrary code execution.
In details, in ActiveMQ configurations, jetty allows
org.jolokia.http.AgentServlet to handler request to /api/jolokia
org.jolokia.http.HttpRequestHandler#handlePostRequest is able to
create JmxRequest through JSONObject. And calls to
org.jolokia.http.HttpRequestHandler#executeRequest.
Into deeper calling stacks,
org.jolokia.handler.ExecHandler#doHandleRequest can be invoked
through refection. This could lead to RCE through via
various mbeans. One example is unrestricted deserialization in jdk.management.jfr.FlightRecorderMXBeanImpl which exists on Java version above 11.
1 Call newRecording.
2 Call setConfiguration. And a webshell data hides in it.
3 Call startRecording.
4 Call copyTo method. The webshell will be written to a .jsp file.
The mitigation is to restrict (by default) the actions authorized on Jolokia, or disable Jolokia.
A more restrictive Jolokia configuration has been defined in default ActiveMQ distribution. We encourage users to upgrade to ActiveMQ distributions version including updated Jolokia configuration: 5.16.6, 5.17.4, 5.18.0, 6.0.0.
|
| A vulnerability was found in libssh, where the authentication check of the connecting client can be bypassed in the`pki_verify_data_signature` function in memory allocation problems. This issue may happen if there is insufficient memory or the memory usage is limited. The problem is caused by the return value `rc,` which is initialized to SSH_ERROR and later rewritten to save the return value of the function call `pki_key_check_hash_compatible.` The value of the variable is not changed between this point and the cryptographic verification. Therefore any error between them calls `goto error` returning SSH_OK. |
| FreeRDP is a free implementation of the Remote Desktop Protocol (RDP). Prior to version 2.7.0, server side authentication against a `SAM` file might be successful for invalid credentials if the server has configured an invalid `SAM` file path. FreeRDP based clients are not affected. RDP server implementations using FreeRDP to authenticate against a `SAM` file are affected. Version 2.7.0 contains a fix for this issue. As a workaround, use custom authentication via `HashCallback` and/or ensure the `SAM` database path configured is valid and the application has file handles left. |
| FreeRDP is a free implementation of the Remote Desktop Protocol (RDP). In versions prior to 2.7.0, NT LAN Manager (NTLM) authentication does not properly abort when someone provides and empty password value. This issue affects FreeRDP based RDP Server implementations. RDP clients are not affected. The vulnerability is patched in FreeRDP 2.7.0. There are currently no known workarounds. |
| A vulnerability was found in the 389 Directory Server that allows expired passwords to access the database to cause improper authentication. |
| OpenVPN 2.1 until v2.4.12 and v2.5.6 may enable authentication bypass in external authentication plug-ins when more than one of them makes use of deferred authentication replies, which allows an external user to be granted access with only partially correct credentials. |
| A flaw was found in 389-ds-base. If an asterisk is imported as password hashes, either accidentally or maliciously, then instead of being inactive, any password will successfully match during authentication. This flaw allows an attacker to successfully authenticate as a user whose password was disabled. |
| Improper Authentication vulnerability in Wikimedia Foundation Mediawiki - CentralAuth Extension allows : Bypass Authentication.This issue affects Mediawiki - CentralAuth Extension: from 1.39.X before 1.39.13, from 1.42.X before 1.42.7, from 1.43.X before 1.43.2. |
| Quest KACE Systems Management Appliance (SMA) 13.0.x before 13.0.385, 13.1.x before 13.1.81, 13.2.x before 13.2.183, 14.0.x before 14.0.341 (Patch 5), and 14.1.x before 14.1.101 (Patch 4) contains an authentication bypass vulnerability that allows attackers to impersonate legitimate users without valid credentials. The vulnerability exists in the SSO authentication handling mechanism and can lead to complete administrative takeover. |
| The issue was addressed with improved authentication. This issue is fixed in iPadOS 17.7.7, iOS 18.5 and iPadOS 18.5. An attacker with physical access to a device may be able to access notes from the lock screen. |
