| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
media: ccs: Avoid possible division by zero
Calculating maximum M for scaler configuration involves dividing by
MIN_X_OUTPUT_SIZE limit register's value. Albeit the value is presumably
non-zero, the driver was missing the check it in fact was. Fix this. |
| Concurrent execution using shared resource with improper synchronization ('race condition') in .NET Framework allows an unauthorized attacker to deny service over a network. |
| A race condition exists in PaperCut MF when processing badge-swipe data from certain HP multifunction devices. Under specific network conditions involving dropped packets and out-of-order sequence counters, the server may incorrectly process fragmented data chunks. If a sequence reset notification fails to reach the server, the server may reject the initial data chunk while erroneously accepting subsequent chunks before a connection reset completes.
This leads to the registration of a truncated badge ID string. While this typically results in an authentication failure, the vulnerability is compounded in environments utilizing custom badge-ID post-processing scripts. In such configurations, the truncated string may be transformed into a valid ID belonging to a different user, leading to unauthorized session establishment (Incorrect User Login) on the device. |
| An issue was discovered in the Shared Account Synchronization component of PaperCut MF (version 25.0.4). The application allows administrative users to configure a source path for account data synchronization.
Due to a lack of proper path validation and sanitization, an authenticated user with administrative privileges can specify arbitrary file paths on the local file system. This allows for the enumeration of directory structures and the unauthorized reading of sensitive text-based configuration or system files.
When the synchronization process is triggered, the application attempts to parse the contents of the specified file, subsequently exposing the data within the application's account management interface. This vulnerability could lead to the disclosure of sensitive system information or configuration details, depending on the permissions of the service account under which the application is running. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/pagewalk: fix race between concurrent split and refault
The splitting of a PUD entry in walk_pud_range() can race with a
concurrent thread refaulting the PUD leaf entry causing it to try walking
a PMD range that has disappeared.
An example and reproduction of this is to try reading numa_maps of a
process while VFIO-PCI is setting up DMA (specifically the
vfio_pin_pages_remote call) on a large BAR for that process.
This will trigger a kernel BUG:
vfio-pci 0000:03:00.0: enabling device (0000 -> 0002)
BUG: unable to handle page fault for address: ffffa23980000000
PGD 0 P4D 0
Oops: Oops: 0000 [#1] SMP NOPTI
...
RIP: 0010:walk_pgd_range+0x3b5/0x7a0
Code: 8d 43 ff 48 89 44 24 28 4d 89 ce 4d 8d a7 00 00 20 00 48 8b 4c 24
28 49 81 e4 00 00 e0 ff 49 8d 44 24 ff 48 39 c8 4c 0f 43 e3 <49> f7 06
9f ff ff ff 75 3b 48 8b 44 24 20 48 8b 40 28 48 85 c0 74
RSP: 0018:ffffac23e1ecf808 EFLAGS: 00010287
RAX: 00007f44c01fffff RBX: 00007f4500000000 RCX: 00007f44ffffffff
RDX: 0000000000000000 RSI: 000ffffffffff000 RDI: ffffffff93378fe0
RBP: ffffac23e1ecf918 R08: 0000000000000004 R09: ffffa23980000000
R10: 0000000000000020 R11: 0000000000000004 R12: 00007f44c0200000
R13: 00007f44c0000000 R14: ffffa23980000000 R15: 00007f44c0000000
FS: 00007fe884739580(0000) GS:ffff9b7d7a9c0000(0000)
knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ffffa23980000000 CR3: 000000c0650e2005 CR4: 0000000000770ef0
PKRU: 55555554
Call Trace:
<TASK>
__walk_page_range+0x195/0x1b0
walk_page_vma+0x62/0xc0
show_numa_map+0x12b/0x3b0
seq_read_iter+0x297/0x440
seq_read+0x11d/0x140
vfs_read+0xc2/0x340
ksys_read+0x5f/0xe0
do_syscall_64+0x68/0x130
? get_page_from_freelist+0x5c2/0x17e0
? mas_store_prealloc+0x17e/0x360
? vma_set_page_prot+0x4c/0xa0
? __alloc_pages_noprof+0x14e/0x2d0
? __mod_memcg_lruvec_state+0x8d/0x140
? __lruvec_stat_mod_folio+0x76/0xb0
? __folio_mod_stat+0x26/0x80
? do_anonymous_page+0x705/0x900
? __handle_mm_fault+0xa8d/0x1000
? __count_memcg_events+0x53/0xf0
? handle_mm_fault+0xa5/0x360
? do_user_addr_fault+0x342/0x640
? arch_exit_to_user_mode_prepare.constprop.0+0x16/0xa0
? irqentry_exit_to_user_mode+0x24/0x100
entry_SYSCALL_64_after_hwframe+0x76/0x7e
RIP: 0033:0x7fe88464f47e
Code: c0 e9 b6 fe ff ff 50 48 8d 3d be 07 0b 00 e8 69 01 02 00 66 0f 1f
84 00 00 00 00 00 64 8b 04 25 18 00 00 00 85 c0 75 14 0f 05 <48> 3d 00
f0 ff ff 77 5a c3 66 0f 1f 84 00 00 00 00 00 48 83 ec 28
RSP: 002b:00007ffe6cd9a9b8 EFLAGS: 00000246 ORIG_RAX: 0000000000000000
RAX: ffffffffffffffda RBX: 0000000000020000 RCX: 00007fe88464f47e
RDX: 0000000000020000 RSI: 00007fe884543000 RDI: 0000000000000003
RBP: 00007fe884543000 R08: 00007fe884542010 R09: 0000000000000000
R10: fffffffffffffbc5 R11: 0000000000000246 R12: 0000000000000000
R13: 0000000000000003 R14: 0000000000020000 R15: 0000000000020000
</TASK>
Fix this by validating the PUD entry in walk_pmd_range() using a stable
snapshot (pudp_get()). If the PUD is not present or is a leaf, retry the
walk via ACTION_AGAIN instead of descending further. This mirrors the
retry logic in walk_pte_range(), which lets walk_pmd_range() retry if the
PTE is not being got by pte_offset_map_lock(). |
| In the Linux kernel, the following vulnerability has been resolved:
xfs: stop reclaim before pushing AIL during unmount
The unmount sequence in xfs_unmount_flush_inodes() pushed the AIL while
background reclaim and inodegc are still running. This is broken
independently of any use-after-free issues - background reclaim and
inodegc should not be running while the AIL is being pushed during
unmount, as inodegc can dirty and insert inodes into the AIL during the
flush, and background reclaim can race to abort and free dirty inodes.
Reorder xfs_unmount_flush_inodes() to stop inodegc and cancel background
reclaim before pushing the AIL. Stop inodegc before cancelling
m_reclaim_work because the inodegc worker can re-queue m_reclaim_work
via xfs_inodegc_set_reclaimable. |
| PackageKit is a a D-Bus abstraction layer that allows the user to manage packages in a secure way using a cross-distro, cross-architecture API. PackageKit between and including versions 1.0.2 and 1.3.4 is vulnerable to a time-of-check time-of-use (TOCTOU) race condition on transaction flags that allows unprivileged users to install packages as root and thus leads to a local privilege escalation. This is patched in version 1.3.5.
A local unprivileged user can install arbitrary RPM packages as root, including executing RPM scriptlets, without authentication. The vulnerability is a TOCTOU race condition on `transaction->cached_transaction_flags` combined with a silent state-machine guard that discards illegal backward transitions while leaving corrupted flags in place. Three bugs exist in `src/pk-transaction.c`:
1. Unconditional flag overwrite (line 4036): `InstallFiles()` writes caller-supplied flags to `transaction->cached_transaction_flags` without checking whether the transaction has already been authorized/started. A second call blindly overwrites the flags even while the transaction is RUNNING.
2. Silent state-transition rejection (lines 873–882): `pk_transaction_set_state()` silently discards backward state transitions (e.g. `RUNNING` → `WAITING_FOR_AUTH`) but the flag overwrite at step 1 already happened. The transaction continues running with corrupted flags.
3. Late flag read at execution time (lines 2273–2277): The scheduler's idle callback reads cached_transaction_flags at dispatch time, not at authorization time. If flags were overwritten between authorization and execution, the backend sees the attacker's flags. |
| A vulnerability has been found in chatchat-space Langchain-Chatchat up to 0.3.1.3. Impacted is the function files of the file libs/chatchat-server/chatchat/server/api_server/openai_routes.py of the component OpenAI-Compatible File Upload API. Such manipulation of the argument file.filename leads to time-of-check time-of-use. Access to the local network is required for this attack to succeed. The attack requires a high level of complexity. The exploitability is considered difficult. The exploit has been disclosed to the public and may be used. The project was informed of the problem early through an issue report but has not responded yet. |
| An unprivileged attacker can reliably trigger a crash of the dtrace process with a malicious ELF binary due to an integer Divide-by-Zero in Pbuild_file_symtab() |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: x86: Acquire kvm->srcu when handling KVM_SET_VCPU_EVENTS
Grab kvm->srcu when processing KVM_SET_VCPU_EVENTS, as KVM will forcibly
leave nested VMX/SVM if SMM mode is being toggled, and leaving nested VMX
reads guest memory.
Note, kvm_vcpu_ioctl_x86_set_vcpu_events() can also be called from KVM_RUN
via sync_regs(), which already holds SRCU. I.e. trying to precisely use
kvm_vcpu_srcu_read_lock() around the problematic SMM code would cause
problems. Acquiring SRCU isn't all that expensive, so for simplicity,
grab it unconditionally for KVM_SET_VCPU_EVENTS.
=============================
WARNING: suspicious RCU usage
6.10.0-rc7-332d2c1d713e-next-vm #552 Not tainted
-----------------------------
include/linux/kvm_host.h:1027 suspicious rcu_dereference_check() usage!
other info that might help us debug this:
rcu_scheduler_active = 2, debug_locks = 1
1 lock held by repro/1071:
#0: ffff88811e424430 (&vcpu->mutex){+.+.}-{3:3}, at: kvm_vcpu_ioctl+0x7d/0x970 [kvm]
stack backtrace:
CPU: 15 PID: 1071 Comm: repro Not tainted 6.10.0-rc7-332d2c1d713e-next-vm #552
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015
Call Trace:
<TASK>
dump_stack_lvl+0x7f/0x90
lockdep_rcu_suspicious+0x13f/0x1a0
kvm_vcpu_gfn_to_memslot+0x168/0x190 [kvm]
kvm_vcpu_read_guest+0x3e/0x90 [kvm]
nested_vmx_load_msr+0x6b/0x1d0 [kvm_intel]
load_vmcs12_host_state+0x432/0xb40 [kvm_intel]
vmx_leave_nested+0x30/0x40 [kvm_intel]
kvm_vcpu_ioctl_x86_set_vcpu_events+0x15d/0x2b0 [kvm]
kvm_arch_vcpu_ioctl+0x1107/0x1750 [kvm]
? mark_held_locks+0x49/0x70
? kvm_vcpu_ioctl+0x7d/0x970 [kvm]
? kvm_vcpu_ioctl+0x497/0x970 [kvm]
kvm_vcpu_ioctl+0x497/0x970 [kvm]
? lock_acquire+0xba/0x2d0
? find_held_lock+0x2b/0x80
? do_user_addr_fault+0x40c/0x6f0
? lock_release+0xb7/0x270
__x64_sys_ioctl+0x82/0xb0
do_syscall_64+0x6c/0x170
entry_SYSCALL_64_after_hwframe+0x4b/0x53
RIP: 0033:0x7ff11eb1b539
</TASK> |
| Improper privilege management in the log rotation mechanism of the Skylight Workspace Config Service in Amazon WorkSpaces for Windows before 2.6.2034.0 allows a local non-admin authenticated user to place arbitrary files into arbitrary locations bypassing file system permission protections, leading to local privilege escalation to SYSTEM. |
| OpenClaw before 2026.4.10 contains a time-of-check-time-of-use vulnerability in the validateScriptFileForShellBleed function that allows local attackers to bypass workspace boundary checks. An attacker with workspace write access can race-condition swap the target file between validation and preflight read, causing the validator to inspect a different file identity than the one that passed the initial boundary check. |
| An issue was discovered in Nix before 2.34.7. Writing to arbitrary files can occur via "nix-prefetch-url --unpack" or "nix store prefetch-file --unpack" directory traversal. The fixed versions are 2.34.7, 2.33.6, 2.32.8, 2.31.5, 2.30.5, 2.29.4, and 2.28.7 (introduced in 2.24.7); |
| A vulnerability has been found in PrefectHQ prefect up to 3.6.28.dev1. Affected by this vulnerability is the function validate_restricted_url of the component Webhook/Notification. The manipulation leads to time-of-check time-of-use. It is possible to initiate the attack remotely. The attack is considered to have high complexity. The exploitation appears to be difficult. The exploit has been disclosed to the public and may be used. Upgrading to version 3.6.28.dev2 addresses this issue. The identifier of the patch is 7c70ac54a5e101431d83b9f2681ec88d5e0021ed. Upgrading the affected component is advised. The vendor was contacted early, responded in a very professional manner and quickly released a fixed version of the affected product. |
| A vulnerability in the tail utility of uutils coreutils allows for the exfiltration of sensitive file contents when using the --follow=name option. Unlike GNU tail, the uutils implementation continues to monitor a path after it has been replaced by a symbolic link, subsequently outputting the contents of the link's target. In environments where a privileged user (e.g., root) monitors a log directory, a local attacker with write access to that directory can replace a log file with a symlink to a sensitive system file (such as /etc/shadow), causing tail to disclose the contents of the sensitive file. |
| AGL app-framework-main thru 17.1.12 contains a Zip Slip path traversal vulnerability (CWE-22) combined with a TOCTOU race condition (CWE-367) in the widget installation flow. The is_valid_filename function in wgtpkg-zip.c validates ZIP entry names but does not check for dot notation directory traversal sequences it only blocks absolute paths. The zread extraction function uses openat(workdirfd, filename, O_CREAT) which resolves dot notation values relative to the work directory, allowing files to be written anywhere on the filesystem. Critically, in function install_widget in file wgtpkg-install.c, extraction via zread occurs BEFORE signature verification via check_all_signatures. Even if signature verification fails, the error cleanup (remove_workdir) only deletes the temporary work directory files written outside via path traversal persist permanently. |
| A Time-of-Check to Time-of-Use (TOCTOU) vulnerability exists in the split utility of uutils coreutils. The program attempts to prevent data loss by checking for identity between input and output files using their file paths before initiating the split operation. However, the utility subsequently opens the output file with truncation after this path-based validation is complete. A local attacker with write access to the directory can exploit this race window by manipulating mutable path components (e.g., swapping a path with a symbolic link). This can cause split to truncate and write to an unintended target file, potentially including the input file itself or other sensitive files accessible to the process, leading to permanent data loss. |
| A Time-of-Check to Time-of-Use (TOCTOU) vulnerability exists in the chcon utility of uutils coreutils during recursive operations. The implementation resolves recursive targets using a fresh path lookup (via fts_accpath) rather than binding the traversal and label application to the specific directory state encountered during traversal. Because these operations are not anchored to file descriptors, a local attacker with write access to a directory tree can exploit timing-sensitive rename or symbolic link races to redirect a privileged recursive relabeling operation to unintended files or directories. This vulnerability breaks the hardening expectations for SELinux administration workflows and can lead to the unauthorized modification of security labels on sensitive system objects. |
| A Time-of-Check to Time-of-Use (TOCTOU) race condition exists in the mkfifo utility of uutils coreutils. The utility creates a FIFO and then performs a path-based chmod to set permissions. A local attacker with write access to the parent directory can swap the newly created FIFO for a symbolic link between these two operations. This redirects the chmod call to an arbitrary file, potentially enabling privilege escalation if the utility is run with elevated privileges. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: core: Wake up the error handler when final completions race against each other
The fragile ordering between marking commands completed or failed so
that the error handler only wakes when the last running command
completes or times out has race conditions. These race conditions can
cause the SCSI layer to fail to wake the error handler, leaving I/O
through the SCSI host stuck as the error state cannot advance.
First, there is an memory ordering issue within scsi_dec_host_busy().
The write which clears SCMD_STATE_INFLIGHT may be reordered with reads
counting in scsi_host_busy(). While the local CPU will see its own
write, reordering can allow other CPUs in scsi_dec_host_busy() or
scsi_eh_inc_host_failed() to see a raised busy count, causing no CPU to
see a host busy equal to the host_failed count.
This race condition can be prevented with a memory barrier on the error
path to force the write to be visible before counting host busy
commands.
Second, there is a general ordering issue with scsi_eh_inc_host_failed(). By
counting busy commands before incrementing host_failed, it can race with a
final command in scsi_dec_host_busy(), such that scsi_dec_host_busy() does
not see host_failed incremented but scsi_eh_inc_host_failed() counts busy
commands before SCMD_STATE_INFLIGHT is cleared by scsi_dec_host_busy(),
resulting in neither waking the error handler task.
This needs the call to scsi_host_busy() to be moved after host_failed is
incremented to close the race condition. |
