| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
USB: class: cdc-wdm: Fix CPU lockup caused by excessive log messages
The syzbot fuzzer found that the interrupt-URB completion callback in
the cdc-wdm driver was taking too long, and the driver's immediate
resubmission of interrupt URBs with -EPROTO status combined with the
dummy-hcd emulation to cause a CPU lockup:
cdc_wdm 1-1:1.0: nonzero urb status received: -71
cdc_wdm 1-1:1.0: wdm_int_callback - 0 bytes
watchdog: BUG: soft lockup - CPU#0 stuck for 26s! [syz-executor782:6625]
CPU#0 Utilization every 4s during lockup:
#1: 98% system, 0% softirq, 3% hardirq, 0% idle
#2: 98% system, 0% softirq, 3% hardirq, 0% idle
#3: 98% system, 0% softirq, 3% hardirq, 0% idle
#4: 98% system, 0% softirq, 3% hardirq, 0% idle
#5: 98% system, 1% softirq, 3% hardirq, 0% idle
Modules linked in:
irq event stamp: 73096
hardirqs last enabled at (73095): [<ffff80008037bc00>] console_emit_next_record kernel/printk/printk.c:2935 [inline]
hardirqs last enabled at (73095): [<ffff80008037bc00>] console_flush_all+0x650/0xb74 kernel/printk/printk.c:2994
hardirqs last disabled at (73096): [<ffff80008af10b00>] __el1_irq arch/arm64/kernel/entry-common.c:533 [inline]
hardirqs last disabled at (73096): [<ffff80008af10b00>] el1_interrupt+0x24/0x68 arch/arm64/kernel/entry-common.c:551
softirqs last enabled at (73048): [<ffff8000801ea530>] softirq_handle_end kernel/softirq.c:400 [inline]
softirqs last enabled at (73048): [<ffff8000801ea530>] handle_softirqs+0xa60/0xc34 kernel/softirq.c:582
softirqs last disabled at (73043): [<ffff800080020de8>] __do_softirq+0x14/0x20 kernel/softirq.c:588
CPU: 0 PID: 6625 Comm: syz-executor782 Tainted: G W 6.10.0-rc2-syzkaller-g8867bbd4a056 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 04/02/2024
Testing showed that the problem did not occur if the two error
messages -- the first two lines above -- were removed; apparently adding
material to the kernel log takes a surprisingly large amount of time.
In any case, the best approach for preventing these lockups and to
avoid spamming the log with thousands of error messages per second is
to ratelimit the two dev_err() calls. Therefore we replace them with
dev_err_ratelimited(). |
| Within Zabbix, users have the ability to directly modify memory pointers in the JavaScript engine. |
| IBM Security Verify Access Docker 10.0.0 through 10.0.6 could allow a local user to escalate their privileges due to execution of unnecessary privileges. IBM X-Force ID: 292418. |
| IBM Security Verify Access Docker 10.0.0 through 10.0.6 could allow a local user to escalate their privileges due to execution of unnecessary privileges. |
| GVCP dissector crash in Wireshark 4.2.0, 4.0.0 to 4.0.11, and 3.6.0 to 3.6.19 allows denial of service via packet injection or crafted capture file |
| Kafka dissector crash in Wireshark 4.0.0 to 4.0.6 and 3.6.0 to 3.6.14 allows denial of service via packet injection or crafted capture file |
| IBM Security Access Manager Docker 10.0.0.0 through 10.0.7.1 could allow a local user to obtain root access due to improper access controls. IBM X-Force ID: 254649. |
| IBM Security Access Manager Docker 10.0.0.0 through 10.0.7.1 could allow a local user to obtain root access due to improper access controls. IBM X-Force ID: 254638. |
| needrestart 0.8 through 3.5 before 3.6 is prone to local privilege escalation. Regexes to detect the Perl, Python, and Ruby interpreters are not anchored, allowing a local user to escalate privileges when needrestart tries to detect if interpreters are using old source files. |
| Icinga is a monitoring system which checks the availability of network resources, notifies users of outages, and generates performance data for reporting. In versions prior to 2.11.10 and from version 2.12.0 through version 2.12.4, some of the Icinga 2 features that require credentials for external services expose those credentials through the API to authenticated API users with read permissions for the corresponding object types. IdoMysqlConnection and IdoPgsqlConnection (every released version) exposes the password of the user used to connect to the database. IcingaDB (added in 2.12.0) exposes the password used to connect to the Redis server. ElasticsearchWriter (added in 2.8.0)exposes the password used to connect to the Elasticsearch server. An attacker who obtains these credentials can impersonate Icinga to these services and add, modify and delete information there. If credentials with more permissions are in use, this increases the impact accordingly. Starting with the 2.11.10 and 2.12.5 releases, these passwords are no longer exposed via the API. As a workaround, API user permissions can be restricted to not allow querying of any affected objects, either by explicitly listing only the required object types for object query permissions, or by applying a filter rule. |
| In Python before 3,9,5, the ipaddress library mishandles leading zero characters in the octets of an IP address string. This (in some situations) allows attackers to bypass access control that is based on IP addresses. |
| A denial of service via regular expression in the py.path.svnwc component of py (aka python-py) through 1.9.0 could be used by attackers to cause a compute-time denial of service attack by supplying malicious input to the blame functionality. |
| A logging issue was addressed with improved data redaction. This issue is fixed in macOS Sequoia 15.3, Safari 18.3. A malicious app may be able to bypass browser extension authentication. |
| IPv6-in-IPv4 tunneling (RFC 4213) allows an attacker to spoof and route traffic via an exposed network interface. |
| IPv4-in-IPv6 and IPv6-in-IPv6 tunneling (RFC 2473) do not require the validation or verification of the source of a network packet, allowing an attacker to spoof and route arbitrary traffic via an exposed network interface. This is a similar issue to CVE-2020-10136. |
| In the Linux kernel, the following vulnerability has been resolved:
ax25: Fix refcount leak caused by setting SO_BINDTODEVICE sockopt
If an AX25 device is bound to a socket by setting the SO_BINDTODEVICE
socket option, a refcount leak will occur in ax25_release().
Commit 9fd75b66b8f6 ("ax25: Fix refcount leaks caused by ax25_cb_del()")
added decrement of device refcounts in ax25_release(). In order for that
to work correctly the refcounts must already be incremented when the
device is bound to the socket. An AX25 device can be bound to a socket
by either calling ax25_bind() or setting SO_BINDTODEVICE socket option.
In both cases the refcounts should be incremented, but in fact it is done
only in ax25_bind().
This bug leads to the following issue reported by Syzkaller:
================================================================
refcount_t: decrement hit 0; leaking memory.
WARNING: CPU: 1 PID: 5932 at lib/refcount.c:31 refcount_warn_saturate+0x1ed/0x210 lib/refcount.c:31
Modules linked in:
CPU: 1 UID: 0 PID: 5932 Comm: syz-executor424 Not tainted 6.13.0-rc4-syzkaller-00110-g4099a71718b0 #0
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014
RIP: 0010:refcount_warn_saturate+0x1ed/0x210 lib/refcount.c:31
Call Trace:
<TASK>
__refcount_dec include/linux/refcount.h:336 [inline]
refcount_dec include/linux/refcount.h:351 [inline]
ref_tracker_free+0x710/0x820 lib/ref_tracker.c:236
netdev_tracker_free include/linux/netdevice.h:4156 [inline]
netdev_put include/linux/netdevice.h:4173 [inline]
netdev_put include/linux/netdevice.h:4169 [inline]
ax25_release+0x33f/0xa10 net/ax25/af_ax25.c:1069
__sock_release+0xb0/0x270 net/socket.c:640
sock_close+0x1c/0x30 net/socket.c:1408
...
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xcd/0x250 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
...
</TASK>
================================================================
Fix the implementation of ax25_setsockopt() by adding increment of
refcounts for the new device bound, and decrement of refcounts for
the old unbound device. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: conntrack: clamp maximum hashtable size to INT_MAX
Use INT_MAX as maximum size for the conntrack hashtable. Otherwise, it
is possible to hit WARN_ON_ONCE in __kvmalloc_node_noprof() when
resizing hashtable because __GFP_NOWARN is unset. See:
0708a0afe291 ("mm: Consider __GFP_NOWARN flag for oversized kvmalloc() calls")
Note: hashtable resize is only possible from init_netns. |
| It was possible to interrupt the processing of a RegExp bailout and run additional JavaScript, potentially triggering garbage collection when the engine was not expecting it. This vulnerability affects Firefox < 136, Firefox ESR < 128.8, Thunderbird < 136, and Thunderbird < 128.8. |
| Proposed Generic UDP Encapsulation (GUE) (IETF Draft) do not validate or verify the source of a network packet allowing an attacker to spoof and route arbitrary traffic via an exposed network interface that can lead to spoofing, access control bypass, and other unexpected network behaviors.
This can be considered similar to CVE-2020-10136. |
| GRE and GRE6 Protocols (RFC2784) do not validate or verify the source of a network packet allowing an attacker to spoof and route arbitrary traffic via an exposed network interface that can lead to spoofing, access control bypass, and other unexpected network behaviors.
This can be considered similar to CVE-2020-10136. |
