| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A vulnerability has been identified in Simcenter Femap (All versions < V2401.0000), Simcenter Femap (All versions < V2306.0001). The affected applications contain an out of bounds read past the end of an allocated structure while parsing specially crafted Catia MODEL files. This could allow an attacker to execute code in the context of the current process. (ZDI-CAN-22055) |
| A vulnerability has been identified in Tecnomatix Plant Simulation V2201 (All versions < V2201.0012), Tecnomatix Plant Simulation V2302 (All versions < V2302.0006). The affected applications contain an out of bounds read past the end of an allocated structure while parsing specially crafted SPP files. This could allow an attacker to execute code in the context of the current process. |
| An Improper Preservation of Consistency Between Independent Representations of Shared State vulnerability in the Packet Forwarding Engine (PFE) of Juniper Networks Junos OS allows a locally authenticated attacker with low privileges to cause a Denial of Service (DoS). If the device is very busy for example while executing a series of show commands on the CLI one or more SFPs might not be detected anymore. The system then changes its state to "unplugged" which is leading to traffic impact and at least a partial DoS. Once the system is less busy the port states return to their actual value. Indicators of compromise are log messages about unplugged SFPs and corresponding syspld messages without any physical or environmental cause. These can be checked by issuing the following commands: user@device# show log messages | match unplugged %PFE-6: fpc0 sfp-0/1/2 SFP unplugged %PFE-6: fpc0 sfp-0/1/3 SFP unplugged The following log messages will also be seen when this issue happens: fpc0 Error tvp_drv_syspld_read: syspld read failed for address <address> fpc0 Error[-1]:tvp_optics_presence_get - Syspld read failed for port <pic/port> fpc0 optics pres failed(-1) for pic <pic> port <port> fpc0 tvp_drv_syspld_read: i2c access retry count 200 This issue affects Juniper Networks Junos OS on EX2300 Series, EX3400 Series: All versions prior to 18.4R3-S11; 19.1 versions prior to 19.1R3-S9; 19.2 versions prior to 19.2R1-S9, 19.2R3-S5; 19.3 versions prior to 19.3R3-S6; 19.4 versions prior to 19.4R2-S7, 19.4R3-S8; 20.1 versions prior to 20.1R3-S4; 20.2 versions prior to 20.2R3-S4; 20.3 versions prior to 20.3R3-S4; 20.4 versions prior to 20.4R3-S3; 21.1 versions prior to 21.1R3-S1; 21.2 versions prior to 21.2R3; 21.3 versions prior to 21.3R2; 21.4 versions prior to 21.4R2. |
| Denial of service in WLAN due to out-of-bound read happens while processing VHT action frame in Snapdragon Auto, Snapdragon Compute, Snapdragon Connectivity, Snapdragon Consumer Electronics Connectivity, Snapdragon Consumer IOT, Snapdragon Industrial IOT, Snapdragon Mobile, Snapdragon Voice & Music, Snapdragon Wearables, Snapdragon Wired Infrastructure and Networking |
| Information disclosure in WLAN due to improper length check while processing authentication handshake in Snapdragon Auto, Snapdragon Connectivity, Snapdragon Consumer Electronics Connectivity, Snapdragon Consumer IOT, Snapdragon Industrial IOT, Snapdragon IoT, Snapdragon Mobile, Snapdragon Voice & Music, Snapdragon Wearables, Snapdragon Wired Infrastructure and Networking |
| GPAC 2.1-DEV-rev368-gfd054169b-master was discovered to contain a segmentation violation via the function BD_CheckSFTimeOffset at /bifs/field_decode.c. |
| wasm-interp v1.0.29 was discovered to contain an out-of-bounds read via the component OnReturnCallIndirectExpr->GetReturnCallDropKeepCount. |
| Out-of-Bounds Read in Virglrenderer in ChromeOS 16093.57.0 allows a malicious guest VM to achieve arbitrary address access within the crosvm sandboxed process, potentially leading to
VM escape via crafted vertex elements data triggering an out-of-bounds read in util_format_description. |
| In LibRaw before 0.21.4, phase_one_correct in decoders/load_mfbacks.cpp allows out-of-buffer access because split_col and split_row values are not checked in 0x041f tag processing. |
| In LibRaw before 0.21.4, phase_one_correct in decoders/load_mfbacks.cpp has out-of-bounds reads for tag 0x412 processing, related to large w0 or w1 values or the frac and mult calculations. |
| In LibRaw before 0.21.4, metadata/tiff.cpp has an out-of-bounds read in the Fujifilm 0xf00c tag parser. |
| Vulnerability in the Oracle Business Intelligence Enterprise Edition product of Oracle Analytics (component: Data Visualization). The supported version that is affected is 7.0.0.0.0. Easily exploitable vulnerability allows low privileged attacker with network access via HTTP to compromise Oracle Business Intelligence Enterprise Edition. Successful attacks of this vulnerability can result in unauthorized read access to a subset of Oracle Business Intelligence Enterprise Edition accessible data. CVSS 3.1 Base Score 4.3 (Confidentiality impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:L/I:N/A:N). |
| LibTIFF 4.4.0 has an out-of-bounds read in writeSingleSection in tools/tiffcrop.c:7345, allowing attackers to cause a denial-of-service via a crafted tiff file. For users that compile libtiff from sources, the fix is available with commit e8131125. |
| LibTIFF 4.4.0 has an out-of-bounds write in _TIFFmemcpy in libtiff/tif_unix.c:346 when called from extractImageSection, tools/tiffcrop.c:6826, allowing attackers to cause a denial-of-service via a crafted tiff file. For users that compile libtiff from sources, the fix is available with commit 236b7191. |
| A vulnerability has been identified in Parasolid V35.0 (All versions < V35.0.263), Parasolid V35.1 (All versions < V35.1.252), Parasolid V36.0 (All versions < V36.0.198), Solid Edge SE2023 (All versions < V223.0 Update 11), Solid Edge SE2024 (All versions < V224.0 Update 3). The affected applications contain an out of bounds read past the end of an allocated structure while parsing specially crafted files containing XT format. This could allow an attacker to execute code in the context of the current process. |
| CryptoLib provides a software-only solution using the CCSDS Space Data Link Security Protocol - Extended Procedures (SDLS-EP) to secure communications between a spacecraft running the core Flight System (cFS) and a ground station. A critical heap buffer overflow vulnerability was identified in the `Crypto_TC_Prep_AAD` function of CryptoLib versions 1.3.3 and prior. This vulnerability allows an attacker to trigger a Denial of Service (DoS) or potentially execute arbitrary code (RCE) by providing a maliciously crafted telecommand (TC) frame that causes an unsigned integer underflow. The vulnerability lies in the function `Crypto_TC_Prep_AAD`, specifically during the computation of `tc_mac_start_index`. The affected code incorrectly calculates the MAC start index without ensuring it remains within the bounds of the `ingest` buffer. When `tc_mac_start_index` underflows due to an incorrect length calculation, the function attempts to access an out-of-bounds memory location, leading to a segmentation fault. The vulnerability is still present in the repository as of commit `d3cc420ace96d02a5b7e83d88cbd2e48010d5723`. |
| Vulnerability in the PeopleSoft Enterprise PeopleTools product of Oracle PeopleSoft (component: Panel Processor). Supported versions that are affected are 8.60 and 8.61. Easily exploitable vulnerability allows low privileged attacker with network access via HTTP to compromise PeopleSoft Enterprise PeopleTools. Successful attacks of this vulnerability can result in unauthorized read access to a subset of PeopleSoft Enterprise PeopleTools accessible data. CVSS 3.1 Base Score 4.3 (Confidentiality impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:L/I:N/A:N). |
| In the Linux kernel, the following vulnerability has been resolved:
bnxt_re: avoid shift undefined behavior in bnxt_qplib_alloc_init_hwq
Undefined behavior is triggered when bnxt_qplib_alloc_init_hwq is called
with hwq_attr->aux_depth != 0 and hwq_attr->aux_stride == 0.
In that case, "roundup_pow_of_two(hwq_attr->aux_stride)" gets called.
roundup_pow_of_two is documented as undefined for 0.
Fix it in the one caller that had this combination.
The undefined behavior was detected by UBSAN:
UBSAN: shift-out-of-bounds in ./include/linux/log2.h:57:13
shift exponent 64 is too large for 64-bit type 'long unsigned int'
CPU: 24 PID: 1075 Comm: (udev-worker) Not tainted 6.9.0-rc6+ #4
Hardware name: Abacus electric, s.r.o. - servis@abacus.cz Super Server/H12SSW-iN, BIOS 2.7 10/25/2023
Call Trace:
<TASK>
dump_stack_lvl+0x5d/0x80
ubsan_epilogue+0x5/0x30
__ubsan_handle_shift_out_of_bounds.cold+0x61/0xec
__roundup_pow_of_two+0x25/0x35 [bnxt_re]
bnxt_qplib_alloc_init_hwq+0xa1/0x470 [bnxt_re]
bnxt_qplib_create_qp+0x19e/0x840 [bnxt_re]
bnxt_re_create_qp+0x9b1/0xcd0 [bnxt_re]
? srso_alias_return_thunk+0x5/0xfbef5
? srso_alias_return_thunk+0x5/0xfbef5
? __kmalloc+0x1b6/0x4f0
? create_qp.part.0+0x128/0x1c0 [ib_core]
? __pfx_bnxt_re_create_qp+0x10/0x10 [bnxt_re]
create_qp.part.0+0x128/0x1c0 [ib_core]
ib_create_qp_kernel+0x50/0xd0 [ib_core]
create_mad_qp+0x8e/0xe0 [ib_core]
? __pfx_qp_event_handler+0x10/0x10 [ib_core]
ib_mad_init_device+0x2be/0x680 [ib_core]
add_client_context+0x10d/0x1a0 [ib_core]
enable_device_and_get+0xe0/0x1d0 [ib_core]
ib_register_device+0x53c/0x630 [ib_core]
? srso_alias_return_thunk+0x5/0xfbef5
bnxt_re_probe+0xbd8/0xe50 [bnxt_re]
? __pfx_bnxt_re_probe+0x10/0x10 [bnxt_re]
auxiliary_bus_probe+0x49/0x80
? driver_sysfs_add+0x57/0xc0
really_probe+0xde/0x340
? pm_runtime_barrier+0x54/0x90
? __pfx___driver_attach+0x10/0x10
__driver_probe_device+0x78/0x110
driver_probe_device+0x1f/0xa0
__driver_attach+0xba/0x1c0
bus_for_each_dev+0x8f/0xe0
bus_add_driver+0x146/0x220
driver_register+0x72/0xd0
__auxiliary_driver_register+0x6e/0xd0
? __pfx_bnxt_re_mod_init+0x10/0x10 [bnxt_re]
bnxt_re_mod_init+0x3e/0xff0 [bnxt_re]
? __pfx_bnxt_re_mod_init+0x10/0x10 [bnxt_re]
do_one_initcall+0x5b/0x310
do_init_module+0x90/0x250
init_module_from_file+0x86/0xc0
idempotent_init_module+0x121/0x2b0
__x64_sys_finit_module+0x5e/0xb0
do_syscall_64+0x82/0x160
? srso_alias_return_thunk+0x5/0xfbef5
? syscall_exit_to_user_mode_prepare+0x149/0x170
? srso_alias_return_thunk+0x5/0xfbef5
? syscall_exit_to_user_mode+0x75/0x230
? srso_alias_return_thunk+0x5/0xfbef5
? do_syscall_64+0x8e/0x160
? srso_alias_return_thunk+0x5/0xfbef5
? __count_memcg_events+0x69/0x100
? srso_alias_return_thunk+0x5/0xfbef5
? count_memcg_events.constprop.0+0x1a/0x30
? srso_alias_return_thunk+0x5/0xfbef5
? handle_mm_fault+0x1f0/0x300
? srso_alias_return_thunk+0x5/0xfbef5
? do_user_addr_fault+0x34e/0x640
? srso_alias_return_thunk+0x5/0xfbef5
? srso_alias_return_thunk+0x5/0xfbef5
entry_SYSCALL_64_after_hwframe+0x76/0x7e
RIP: 0033:0x7f4e5132821d
Code: ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d e3 db 0c 00 f7 d8 64 89 01 48
RSP: 002b:00007ffca9c906a8 EFLAGS: 00000246 ORIG_RAX: 0000000000000139
RAX: ffffffffffffffda RBX: 0000563ec8a8f130 RCX: 00007f4e5132821d
RDX: 0000000000000000 RSI: 00007f4e518fa07d RDI: 000000000000003b
RBP: 00007ffca9c90760 R08: 00007f4e513f6b20 R09: 00007ffca9c906f0
R10: 0000563ec8a8faa0 R11: 0000000000000246 R12: 00007f4e518fa07d
R13: 0000000000020000 R14: 0000563ec8409e90 R15: 0000563ec8a8fa60
</TASK>
---[ end trace ]--- |
| ECMP dissector crash in Wireshark 4.4.0 to 4.4.1 and 4.2.0 to 4.2.8 allows denial of service via packet injection or crafted capture file |
| An issue was discovered in Connected Vehicle Systems Alliance (COVESA) dlt-daemon through 2.18.8. Due to a faulty DLT file parser, a crafted DLT file that crashes the process can be created. This is due to missing validation checks. There is a heap-based buffer over-read of one byte. |
