| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
tcp/dccp: Don't use timer_pending() in reqsk_queue_unlink().
Martin KaFai Lau reported use-after-free [0] in reqsk_timer_handler().
"""
We are seeing a use-after-free from a bpf prog attached to
trace_tcp_retransmit_synack. The program passes the req->sk to the
bpf_sk_storage_get_tracing kernel helper which does check for null
before using it.
"""
The commit 83fccfc3940c ("inet: fix potential deadlock in
reqsk_queue_unlink()") added timer_pending() in reqsk_queue_unlink() not
to call del_timer_sync() from reqsk_timer_handler(), but it introduced a
small race window.
Before the timer is called, expire_timers() calls detach_timer(timer, true)
to clear timer->entry.pprev and marks it as not pending.
If reqsk_queue_unlink() checks timer_pending() just after expire_timers()
calls detach_timer(), TCP will miss del_timer_sync(); the reqsk timer will
continue running and send multiple SYN+ACKs until it expires.
The reported UAF could happen if req->sk is close()d earlier than the timer
expiration, which is 63s by default.
The scenario would be
1. inet_csk_complete_hashdance() calls inet_csk_reqsk_queue_drop(),
but del_timer_sync() is missed
2. reqsk timer is executed and scheduled again
3. req->sk is accept()ed and reqsk_put() decrements rsk_refcnt, but
reqsk timer still has another one, and inet_csk_accept() does not
clear req->sk for non-TFO sockets
4. sk is close()d
5. reqsk timer is executed again, and BPF touches req->sk
Let's not use timer_pending() by passing the caller context to
__inet_csk_reqsk_queue_drop().
Note that reqsk timer is pinned, so the issue does not happen in most
use cases. [1]
[0]
BUG: KFENCE: use-after-free read in bpf_sk_storage_get_tracing+0x2e/0x1b0
Use-after-free read at 0x00000000a891fb3a (in kfence-#1):
bpf_sk_storage_get_tracing+0x2e/0x1b0
bpf_prog_5ea3e95db6da0438_tcp_retransmit_synack+0x1d20/0x1dda
bpf_trace_run2+0x4c/0xc0
tcp_rtx_synack+0xf9/0x100
reqsk_timer_handler+0xda/0x3d0
run_timer_softirq+0x292/0x8a0
irq_exit_rcu+0xf5/0x320
sysvec_apic_timer_interrupt+0x6d/0x80
asm_sysvec_apic_timer_interrupt+0x16/0x20
intel_idle_irq+0x5a/0xa0
cpuidle_enter_state+0x94/0x273
cpu_startup_entry+0x15e/0x260
start_secondary+0x8a/0x90
secondary_startup_64_no_verify+0xfa/0xfb
kfence-#1: 0x00000000a72cc7b6-0x00000000d97616d9, size=2376, cache=TCPv6
allocated by task 0 on cpu 9 at 260507.901592s:
sk_prot_alloc+0x35/0x140
sk_clone_lock+0x1f/0x3f0
inet_csk_clone_lock+0x15/0x160
tcp_create_openreq_child+0x1f/0x410
tcp_v6_syn_recv_sock+0x1da/0x700
tcp_check_req+0x1fb/0x510
tcp_v6_rcv+0x98b/0x1420
ipv6_list_rcv+0x2258/0x26e0
napi_complete_done+0x5b1/0x2990
mlx5e_napi_poll+0x2ae/0x8d0
net_rx_action+0x13e/0x590
irq_exit_rcu+0xf5/0x320
common_interrupt+0x80/0x90
asm_common_interrupt+0x22/0x40
cpuidle_enter_state+0xfb/0x273
cpu_startup_entry+0x15e/0x260
start_secondary+0x8a/0x90
secondary_startup_64_no_verify+0xfa/0xfb
freed by task 0 on cpu 9 at 260507.927527s:
rcu_core_si+0x4ff/0xf10
irq_exit_rcu+0xf5/0x320
sysvec_apic_timer_interrupt+0x6d/0x80
asm_sysvec_apic_timer_interrupt+0x16/0x20
cpuidle_enter_state+0xfb/0x273
cpu_startup_entry+0x15e/0x260
start_secondary+0x8a/0x90
secondary_startup_64_no_verify+0xfa/0xfb |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: SCO: Fix UAF on sco_sock_timeout
conn->sk maybe have been unlinked/freed while waiting for sco_conn_lock
so this checks if the conn->sk is still valid by checking if it part of
sco_sk_list. |
| In the Linux kernel, the following vulnerability has been resolved:
mptcp: pm: fix UaF read in mptcp_pm_nl_rm_addr_or_subflow
Syzkaller reported this splat:
==================================================================
BUG: KASAN: slab-use-after-free in mptcp_pm_nl_rm_addr_or_subflow+0xb44/0xcc0 net/mptcp/pm_netlink.c:881
Read of size 4 at addr ffff8880569ac858 by task syz.1.2799/14662
CPU: 0 UID: 0 PID: 14662 Comm: syz.1.2799 Not tainted 6.12.0-rc2-syzkaller-00307-g36c254515dc6 #0
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:94 [inline]
dump_stack_lvl+0x116/0x1f0 lib/dump_stack.c:120
print_address_description mm/kasan/report.c:377 [inline]
print_report+0xc3/0x620 mm/kasan/report.c:488
kasan_report+0xd9/0x110 mm/kasan/report.c:601
mptcp_pm_nl_rm_addr_or_subflow+0xb44/0xcc0 net/mptcp/pm_netlink.c:881
mptcp_pm_nl_rm_subflow_received net/mptcp/pm_netlink.c:914 [inline]
mptcp_nl_remove_id_zero_address+0x305/0x4a0 net/mptcp/pm_netlink.c:1572
mptcp_pm_nl_del_addr_doit+0x5c9/0x770 net/mptcp/pm_netlink.c:1603
genl_family_rcv_msg_doit+0x202/0x2f0 net/netlink/genetlink.c:1115
genl_family_rcv_msg net/netlink/genetlink.c:1195 [inline]
genl_rcv_msg+0x565/0x800 net/netlink/genetlink.c:1210
netlink_rcv_skb+0x165/0x410 net/netlink/af_netlink.c:2551
genl_rcv+0x28/0x40 net/netlink/genetlink.c:1219
netlink_unicast_kernel net/netlink/af_netlink.c:1331 [inline]
netlink_unicast+0x53c/0x7f0 net/netlink/af_netlink.c:1357
netlink_sendmsg+0x8b8/0xd70 net/netlink/af_netlink.c:1901
sock_sendmsg_nosec net/socket.c:729 [inline]
__sock_sendmsg net/socket.c:744 [inline]
____sys_sendmsg+0x9ae/0xb40 net/socket.c:2607
___sys_sendmsg+0x135/0x1e0 net/socket.c:2661
__sys_sendmsg+0x117/0x1f0 net/socket.c:2690
do_syscall_32_irqs_on arch/x86/entry/common.c:165 [inline]
__do_fast_syscall_32+0x73/0x120 arch/x86/entry/common.c:386
do_fast_syscall_32+0x32/0x80 arch/x86/entry/common.c:411
entry_SYSENTER_compat_after_hwframe+0x84/0x8e
RIP: 0023:0xf7fe4579
Code: b8 01 10 06 03 74 b4 01 10 07 03 74 b0 01 10 08 03 74 d8 01 00 00 00 00 00 00 00 00 00 00 00 00 00 51 52 55 89 e5 0f 34 cd 80 <5d> 5a 59 c3 90 90 90 90 8d b4 26 00 00 00 00 8d b4 26 00 00 00 00
RSP: 002b:00000000f574556c EFLAGS: 00000296 ORIG_RAX: 0000000000000172
RAX: ffffffffffffffda RBX: 000000000000000b RCX: 0000000020000140
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000
RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000296 R12: 0000000000000000
R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
</TASK>
Allocated by task 5387:
kasan_save_stack+0x33/0x60 mm/kasan/common.c:47
kasan_save_track+0x14/0x30 mm/kasan/common.c:68
poison_kmalloc_redzone mm/kasan/common.c:377 [inline]
__kasan_kmalloc+0xaa/0xb0 mm/kasan/common.c:394
kmalloc_noprof include/linux/slab.h:878 [inline]
kzalloc_noprof include/linux/slab.h:1014 [inline]
subflow_create_ctx+0x87/0x2a0 net/mptcp/subflow.c:1803
subflow_ulp_init+0xc3/0x4d0 net/mptcp/subflow.c:1956
__tcp_set_ulp net/ipv4/tcp_ulp.c:146 [inline]
tcp_set_ulp+0x326/0x7f0 net/ipv4/tcp_ulp.c:167
mptcp_subflow_create_socket+0x4ae/0x10a0 net/mptcp/subflow.c:1764
__mptcp_subflow_connect+0x3cc/0x1490 net/mptcp/subflow.c:1592
mptcp_pm_create_subflow_or_signal_addr+0xbda/0x23a0 net/mptcp/pm_netlink.c:642
mptcp_pm_nl_fully_established net/mptcp/pm_netlink.c:650 [inline]
mptcp_pm_nl_work+0x3a1/0x4f0 net/mptcp/pm_netlink.c:943
mptcp_worker+0x15a/0x1240 net/mptcp/protocol.c:2777
process_one_work+0x958/0x1b30 kernel/workqueue.c:3229
process_scheduled_works kernel/workqueue.c:3310 [inline]
worker_thread+0x6c8/0xf00 kernel/workqueue.c:3391
kthread+0x2c1/0x3a0 kernel/kthread.c:389
ret_from_fork+0x45/0x80 arch/x86/ke
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
net: microchip: vcap api: Fix memory leaks in vcap_api_encode_rule_test()
Commit a3c1e45156ad ("net: microchip: vcap: Fix use-after-free error in
kunit test") fixed the use-after-free error, but introduced below
memory leaks by removing necessary vcap_free_rule(), add it to fix it.
unreferenced object 0xffffff80ca58b700 (size 192):
comm "kunit_try_catch", pid 1215, jiffies 4294898264
hex dump (first 32 bytes):
00 12 7a 00 05 00 00 00 0a 00 00 00 64 00 00 00 ..z.........d...
00 00 00 00 00 00 00 00 00 04 0b cc 80 ff ff ff ................
backtrace (crc 9c09c3fe):
[<0000000052a0be73>] kmemleak_alloc+0x34/0x40
[<0000000043605459>] __kmalloc_cache_noprof+0x26c/0x2f4
[<0000000040a01b8d>] vcap_alloc_rule+0x3cc/0x9c4
[<000000003fe86110>] vcap_api_encode_rule_test+0x1ac/0x16b0
[<00000000b3595fc4>] kunit_try_run_case+0x13c/0x3ac
[<0000000010f5d2bf>] kunit_generic_run_threadfn_adapter+0x80/0xec
[<00000000c5d82c9a>] kthread+0x2e8/0x374
[<00000000f4287308>] ret_from_fork+0x10/0x20
unreferenced object 0xffffff80cc0b0400 (size 64):
comm "kunit_try_catch", pid 1215, jiffies 4294898265
hex dump (first 32 bytes):
80 04 0b cc 80 ff ff ff 18 b7 58 ca 80 ff ff ff ..........X.....
39 00 00 00 02 00 00 00 06 05 04 03 02 01 ff ff 9...............
backtrace (crc daf014e9):
[<0000000052a0be73>] kmemleak_alloc+0x34/0x40
[<0000000043605459>] __kmalloc_cache_noprof+0x26c/0x2f4
[<000000000ff63fd4>] vcap_rule_add_key+0x2cc/0x528
[<00000000dfdb1e81>] vcap_api_encode_rule_test+0x224/0x16b0
[<00000000b3595fc4>] kunit_try_run_case+0x13c/0x3ac
[<0000000010f5d2bf>] kunit_generic_run_threadfn_adapter+0x80/0xec
[<00000000c5d82c9a>] kthread+0x2e8/0x374
[<00000000f4287308>] ret_from_fork+0x10/0x20
unreferenced object 0xffffff80cc0b0700 (size 64):
comm "kunit_try_catch", pid 1215, jiffies 4294898265
hex dump (first 32 bytes):
80 07 0b cc 80 ff ff ff 28 b7 58 ca 80 ff ff ff ........(.X.....
3c 00 00 00 00 00 00 00 01 2f 03 b3 ec ff ff ff <......../......
backtrace (crc 8d877792):
[<0000000052a0be73>] kmemleak_alloc+0x34/0x40
[<0000000043605459>] __kmalloc_cache_noprof+0x26c/0x2f4
[<000000006eadfab7>] vcap_rule_add_action+0x2d0/0x52c
[<00000000323475d1>] vcap_api_encode_rule_test+0x4d4/0x16b0
[<00000000b3595fc4>] kunit_try_run_case+0x13c/0x3ac
[<0000000010f5d2bf>] kunit_generic_run_threadfn_adapter+0x80/0xec
[<00000000c5d82c9a>] kthread+0x2e8/0x374
[<00000000f4287308>] ret_from_fork+0x10/0x20
unreferenced object 0xffffff80cc0b0900 (size 64):
comm "kunit_try_catch", pid 1215, jiffies 4294898266
hex dump (first 32 bytes):
80 09 0b cc 80 ff ff ff 80 06 0b cc 80 ff ff ff ................
7d 00 00 00 01 00 00 00 00 00 00 00 ff 00 00 00 }...............
backtrace (crc 34181e56):
[<0000000052a0be73>] kmemleak_alloc+0x34/0x40
[<0000000043605459>] __kmalloc_cache_noprof+0x26c/0x2f4
[<000000000ff63fd4>] vcap_rule_add_key+0x2cc/0x528
[<00000000991e3564>] vcap_val_rule+0xcf0/0x13e8
[<00000000fc9868e5>] vcap_api_encode_rule_test+0x678/0x16b0
[<00000000b3595fc4>] kunit_try_run_case+0x13c/0x3ac
[<0000000010f5d2bf>] kunit_generic_run_threadfn_adapter+0x80/0xec
[<00000000c5d82c9a>] kthread+0x2e8/0x374
[<00000000f4287308>] ret_from_fork+0x10/0x20
unreferenced object 0xffffff80cc0b0980 (size 64):
comm "kunit_try_catch", pid 1215, jiffies 4294898266
hex dump (first 32 bytes):
18 b7 58 ca 80 ff ff ff 00 09 0b cc 80 ff ff ff ..X.............
67 00 00 00 00 00 00 00 01 01 74 88 c0 ff ff ff g.........t.....
backtrace (crc 275fd9be):
[<0000000052a0be73>] kmemleak_alloc+0x34/0x40
[<0000000043605459>] __kmalloc_cache_noprof+0x26c/0x2f4
[<000000000ff63fd4>] vcap_rule_add_key+0x2cc/0x528
[<000000001396a1a2>] test_add_de
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
net: do not delay dst_entries_add() in dst_release()
dst_entries_add() uses per-cpu data that might be freed at netns
dismantle from ip6_route_net_exit() calling dst_entries_destroy()
Before ip6_route_net_exit() can be called, we release all
the dsts associated with this netns, via calls to dst_release(),
which waits an rcu grace period before calling dst_destroy()
dst_entries_add() use in dst_destroy() is racy, because
dst_entries_destroy() could have been called already.
Decrementing the number of dsts must happen sooner.
Notes:
1) in CONFIG_XFRM case, dst_destroy() can call
dst_release_immediate(child), this might also cause UAF
if the child does not have DST_NOCOUNT set.
IPSEC maintainers might take a look and see how to address this.
2) There is also discussion about removing this count of dst,
which might happen in future kernels. |
| In the Linux kernel, the following vulnerability has been resolved:
aoe: fix the potential use-after-free problem in more places
For fixing CVE-2023-6270, f98364e92662 ("aoe: fix the potential
use-after-free problem in aoecmd_cfg_pkts") makes tx() calling dev_put()
instead of doing in aoecmd_cfg_pkts(). It avoids that the tx() runs
into use-after-free.
Then Nicolai Stange found more places in aoe have potential use-after-free
problem with tx(). e.g. revalidate(), aoecmd_ata_rw(), resend(), probe()
and aoecmd_cfg_rsp(). Those functions also use aoenet_xmit() to push
packet to tx queue. So they should also use dev_hold() to increase the
refcnt of skb->dev.
On the other hand, moving dev_put() to tx() causes that the refcnt of
skb->dev be reduced to a negative value, because corresponding
dev_hold() are not called in revalidate(), aoecmd_ata_rw(), resend(),
probe(), and aoecmd_cfg_rsp(). This patch fixed this issue. |
| In the Linux kernel, the following vulnerability has been resolved:
nbd: fix race between timeout and normal completion
If request timetout is handled by nbd_requeue_cmd(), normal completion
has to be stopped for avoiding to complete this requeued request, other
use-after-free can be triggered.
Fix the race by clearing NBD_CMD_INFLIGHT in nbd_requeue_cmd(), meantime
make sure that cmd->lock is grabbed for clearing the flag and the
requeue. |
| In the Linux kernel, the following vulnerability has been resolved:
block, bfq: fix uaf for accessing waker_bfqq after splitting
After commit 42c306ed7233 ("block, bfq: don't break merge chain in
bfq_split_bfqq()"), if the current procress is the last holder of bfqq,
the bfqq can be freed after bfq_split_bfqq(). Hence recored the bfqq and
then access bfqq->waker_bfqq may trigger UAF. What's more, the waker_bfqq
may in the merge chain of bfqq, hence just recored waker_bfqq is still
not safe.
Fix the problem by adding a helper bfq_waker_bfqq() to check if
bfqq->waker_bfqq is in the merge chain, and current procress is the only
holder. |
| In the Linux kernel, the following vulnerability has been resolved:
af_unix: Don't return OOB skb in manage_oob().
syzbot reported use-after-free in unix_stream_recv_urg(). [0]
The scenario is
1. send(MSG_OOB)
2. recv(MSG_OOB)
-> The consumed OOB remains in recv queue
3. send(MSG_OOB)
4. recv()
-> manage_oob() returns the next skb of the consumed OOB
-> This is also OOB, but unix_sk(sk)->oob_skb is not cleared
5. recv(MSG_OOB)
-> unix_sk(sk)->oob_skb is used but already freed
The recent commit 8594d9b85c07 ("af_unix: Don't call skb_get() for OOB
skb.") uncovered the issue.
If the OOB skb is consumed and the next skb is peeked in manage_oob(),
we still need to check if the skb is OOB.
Let's do so by falling back to the following checks in manage_oob()
and add the test case in selftest.
Note that we need to add a similar check for SIOCATMARK.
[0]:
BUG: KASAN: slab-use-after-free in unix_stream_read_actor+0xa6/0xb0 net/unix/af_unix.c:2959
Read of size 4 at addr ffff8880326abcc4 by task syz-executor178/5235
CPU: 0 UID: 0 PID: 5235 Comm: syz-executor178 Not tainted 6.11.0-rc5-syzkaller-00742-gfbdaffe41adc #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 08/06/2024
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:93 [inline]
dump_stack_lvl+0x241/0x360 lib/dump_stack.c:119
print_address_description mm/kasan/report.c:377 [inline]
print_report+0x169/0x550 mm/kasan/report.c:488
kasan_report+0x143/0x180 mm/kasan/report.c:601
unix_stream_read_actor+0xa6/0xb0 net/unix/af_unix.c:2959
unix_stream_recv_urg+0x1df/0x320 net/unix/af_unix.c:2640
unix_stream_read_generic+0x2456/0x2520 net/unix/af_unix.c:2778
unix_stream_recvmsg+0x22b/0x2c0 net/unix/af_unix.c:2996
sock_recvmsg_nosec net/socket.c:1046 [inline]
sock_recvmsg+0x22f/0x280 net/socket.c:1068
____sys_recvmsg+0x1db/0x470 net/socket.c:2816
___sys_recvmsg net/socket.c:2858 [inline]
__sys_recvmsg+0x2f0/0x3e0 net/socket.c:2888
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7f5360d6b4e9
Code: 48 83 c4 28 c3 e8 37 17 00 00 0f 1f 80 00 00 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007fff29b3a458 EFLAGS: 00000246 ORIG_RAX: 000000000000002f
RAX: ffffffffffffffda RBX: 00007fff29b3a638 RCX: 00007f5360d6b4e9
RDX: 0000000000002001 RSI: 0000000020000640 RDI: 0000000000000003
RBP: 00007f5360dde610 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000001
R13: 00007fff29b3a628 R14: 0000000000000001 R15: 0000000000000001
</TASK>
Allocated by task 5235:
kasan_save_stack mm/kasan/common.c:47 [inline]
kasan_save_track+0x3f/0x80 mm/kasan/common.c:68
unpoison_slab_object mm/kasan/common.c:312 [inline]
__kasan_slab_alloc+0x66/0x80 mm/kasan/common.c:338
kasan_slab_alloc include/linux/kasan.h:201 [inline]
slab_post_alloc_hook mm/slub.c:3988 [inline]
slab_alloc_node mm/slub.c:4037 [inline]
kmem_cache_alloc_node_noprof+0x16b/0x320 mm/slub.c:4080
__alloc_skb+0x1c3/0x440 net/core/skbuff.c:667
alloc_skb include/linux/skbuff.h:1320 [inline]
alloc_skb_with_frags+0xc3/0x770 net/core/skbuff.c:6528
sock_alloc_send_pskb+0x91a/0xa60 net/core/sock.c:2815
sock_alloc_send_skb include/net/sock.h:1778 [inline]
queue_oob+0x108/0x680 net/unix/af_unix.c:2198
unix_stream_sendmsg+0xd24/0xf80 net/unix/af_unix.c:2351
sock_sendmsg_nosec net/socket.c:730 [inline]
__sock_sendmsg+0x221/0x270 net/socket.c:745
____sys_sendmsg+0x525/0x7d0 net/socket.c:2597
___sys_sendmsg net/socket.c:2651 [inline]
__sys_sendmsg+0x2b0/0x3a0 net/socket.c:2680
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Freed by task 5235:
kasan_save_stack mm/kasan/common.c:47
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
binder: fix UAF caused by offsets overwrite
Binder objects are processed and copied individually into the target
buffer during transactions. Any raw data in-between these objects is
copied as well. However, this raw data copy lacks an out-of-bounds
check. If the raw data exceeds the data section size then the copy
overwrites the offsets section. This eventually triggers an error that
attempts to unwind the processed objects. However, at this point the
offsets used to index these objects are now corrupted.
Unwinding with corrupted offsets can result in decrements of arbitrary
nodes and lead to their premature release. Other users of such nodes are
left with a dangling pointer triggering a use-after-free. This issue is
made evident by the following KASAN report (trimmed):
==================================================================
BUG: KASAN: slab-use-after-free in _raw_spin_lock+0xe4/0x19c
Write of size 4 at addr ffff47fc91598f04 by task binder-util/743
CPU: 9 UID: 0 PID: 743 Comm: binder-util Not tainted 6.11.0-rc4 #1
Hardware name: linux,dummy-virt (DT)
Call trace:
_raw_spin_lock+0xe4/0x19c
binder_free_buf+0x128/0x434
binder_thread_write+0x8a4/0x3260
binder_ioctl+0x18f0/0x258c
[...]
Allocated by task 743:
__kmalloc_cache_noprof+0x110/0x270
binder_new_node+0x50/0x700
binder_transaction+0x413c/0x6da8
binder_thread_write+0x978/0x3260
binder_ioctl+0x18f0/0x258c
[...]
Freed by task 745:
kfree+0xbc/0x208
binder_thread_read+0x1c5c/0x37d4
binder_ioctl+0x16d8/0x258c
[...]
==================================================================
To avoid this issue, let's check that the raw data copy is within the
boundaries of the data section. |
| In the Linux kernel, the following vulnerability has been resolved:
netem: fix return value if duplicate enqueue fails
There is a bug in netem_enqueue() introduced by
commit 5845f706388a ("net: netem: fix skb length BUG_ON in __skb_to_sgvec")
that can lead to a use-after-free.
This commit made netem_enqueue() always return NET_XMIT_SUCCESS
when a packet is duplicated, which can cause the parent qdisc's q.qlen
to be mistakenly incremented. When this happens qlen_notify() may be
skipped on the parent during destruction, leaving a dangling pointer
for some classful qdiscs like DRR.
There are two ways for the bug happen:
- If the duplicated packet is dropped by rootq->enqueue() and then
the original packet is also dropped.
- If rootq->enqueue() sends the duplicated packet to a different qdisc
and the original packet is dropped.
In both cases NET_XMIT_SUCCESS is returned even though no packets
are enqueued at the netem qdisc.
The fix is to defer the enqueue of the duplicate packet until after
the original packet has been guaranteed to return NET_XMIT_SUCCESS. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv6: fix possible UAF in ip6_finish_output2()
If skb_expand_head() returns NULL, skb has been freed
and associated dst/idev could also have been freed.
We need to hold rcu_read_lock() to make sure the dst and
associated idev are alive. |
| In the Linux kernel, the following vulnerability has been resolved:
PCI/DPC: Fix use-after-free on concurrent DPC and hot-removal
Keith reports a use-after-free when a DPC event occurs concurrently to
hot-removal of the same portion of the hierarchy:
The dpc_handler() awaits readiness of the secondary bus below the
Downstream Port where the DPC event occurred. To do so, it polls the
config space of the first child device on the secondary bus. If that
child device is concurrently removed, accesses to its struct pci_dev
cause the kernel to oops.
That's because pci_bridge_wait_for_secondary_bus() neglects to hold a
reference on the child device. Before v6.3, the function was only
called on resume from system sleep or on runtime resume. Holding a
reference wasn't necessary back then because the pciehp IRQ thread
could never run concurrently. (On resume from system sleep, IRQs are
not enabled until after the resume_noirq phase. And runtime resume is
always awaited before a PCI device is removed.)
However starting with v6.3, pci_bridge_wait_for_secondary_bus() is also
called on a DPC event. Commit 53b54ad074de ("PCI/DPC: Await readiness
of secondary bus after reset"), which introduced that, failed to
appreciate that pci_bridge_wait_for_secondary_bus() now needs to hold a
reference on the child device because dpc_handler() and pciehp may
indeed run concurrently. The commit was backported to v5.10+ stable
kernels, so that's the oldest one affected.
Add the missing reference acquisition.
Abridged stack trace:
BUG: unable to handle page fault for address: 00000000091400c0
CPU: 15 PID: 2464 Comm: irq/53-pcie-dpc 6.9.0
RIP: pci_bus_read_config_dword+0x17/0x50
pci_dev_wait()
pci_bridge_wait_for_secondary_bus()
dpc_reset_link()
pcie_do_recovery()
dpc_handler() |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_tables: unconditionally flush pending work before notifier
syzbot reports:
KASAN: slab-uaf in nft_ctx_update include/net/netfilter/nf_tables.h:1831
KASAN: slab-uaf in nft_commit_release net/netfilter/nf_tables_api.c:9530
KASAN: slab-uaf int nf_tables_trans_destroy_work+0x152b/0x1750 net/netfilter/nf_tables_api.c:9597
Read of size 2 at addr ffff88802b0051c4 by task kworker/1:1/45
[..]
Workqueue: events nf_tables_trans_destroy_work
Call Trace:
nft_ctx_update include/net/netfilter/nf_tables.h:1831 [inline]
nft_commit_release net/netfilter/nf_tables_api.c:9530 [inline]
nf_tables_trans_destroy_work+0x152b/0x1750 net/netfilter/nf_tables_api.c:9597
Problem is that the notifier does a conditional flush, but its possible
that the table-to-be-removed is still referenced by transactions being
processed by the worker, so we need to flush unconditionally.
We could make the flush_work depend on whether we found a table to delete
in nf-next to avoid the flush for most cases.
AFAICS this problem is only exposed in nf-next, with
commit e169285f8c56 ("netfilter: nf_tables: do not store nft_ctx in transaction objects"),
with this commit applied there is an unconditional fetch of
table->family which is whats triggering the above splat. |
| In the Linux kernel, the following vulnerability has been resolved:
filelock: fix potential use-after-free in posix_lock_inode
Light Hsieh reported a KASAN UAF warning in trace_posix_lock_inode().
The request pointer had been changed earlier to point to a lock entry
that was added to the inode's list. However, before the tracepoint could
fire, another task raced in and freed that lock.
Fix this by moving the tracepoint inside the spinlock, which should
ensure that this doesn't happen. |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: Fix UAF when resolving a clash
KASAN reports the following UAF:
BUG: KASAN: slab-use-after-free in tcf_ct_flow_table_process_conn+0x12b/0x380 [act_ct]
Read of size 1 at addr ffff888c07603600 by task handler130/6469
Call Trace:
<IRQ>
dump_stack_lvl+0x48/0x70
print_address_description.constprop.0+0x33/0x3d0
print_report+0xc0/0x2b0
kasan_report+0xd0/0x120
__asan_load1+0x6c/0x80
tcf_ct_flow_table_process_conn+0x12b/0x380 [act_ct]
tcf_ct_act+0x886/0x1350 [act_ct]
tcf_action_exec+0xf8/0x1f0
fl_classify+0x355/0x360 [cls_flower]
__tcf_classify+0x1fd/0x330
tcf_classify+0x21c/0x3c0
sch_handle_ingress.constprop.0+0x2c5/0x500
__netif_receive_skb_core.constprop.0+0xb25/0x1510
__netif_receive_skb_list_core+0x220/0x4c0
netif_receive_skb_list_internal+0x446/0x620
napi_complete_done+0x157/0x3d0
gro_cell_poll+0xcf/0x100
__napi_poll+0x65/0x310
net_rx_action+0x30c/0x5c0
__do_softirq+0x14f/0x491
__irq_exit_rcu+0x82/0xc0
irq_exit_rcu+0xe/0x20
common_interrupt+0xa1/0xb0
</IRQ>
<TASK>
asm_common_interrupt+0x27/0x40
Allocated by task 6469:
kasan_save_stack+0x38/0x70
kasan_set_track+0x25/0x40
kasan_save_alloc_info+0x1e/0x40
__kasan_krealloc+0x133/0x190
krealloc+0xaa/0x130
nf_ct_ext_add+0xed/0x230 [nf_conntrack]
tcf_ct_act+0x1095/0x1350 [act_ct]
tcf_action_exec+0xf8/0x1f0
fl_classify+0x355/0x360 [cls_flower]
__tcf_classify+0x1fd/0x330
tcf_classify+0x21c/0x3c0
sch_handle_ingress.constprop.0+0x2c5/0x500
__netif_receive_skb_core.constprop.0+0xb25/0x1510
__netif_receive_skb_list_core+0x220/0x4c0
netif_receive_skb_list_internal+0x446/0x620
napi_complete_done+0x157/0x3d0
gro_cell_poll+0xcf/0x100
__napi_poll+0x65/0x310
net_rx_action+0x30c/0x5c0
__do_softirq+0x14f/0x491
Freed by task 6469:
kasan_save_stack+0x38/0x70
kasan_set_track+0x25/0x40
kasan_save_free_info+0x2b/0x60
____kasan_slab_free+0x180/0x1f0
__kasan_slab_free+0x12/0x30
slab_free_freelist_hook+0xd2/0x1a0
__kmem_cache_free+0x1a2/0x2f0
kfree+0x78/0x120
nf_conntrack_free+0x74/0x130 [nf_conntrack]
nf_ct_destroy+0xb2/0x140 [nf_conntrack]
__nf_ct_resolve_clash+0x529/0x5d0 [nf_conntrack]
nf_ct_resolve_clash+0xf6/0x490 [nf_conntrack]
__nf_conntrack_confirm+0x2c6/0x770 [nf_conntrack]
tcf_ct_act+0x12ad/0x1350 [act_ct]
tcf_action_exec+0xf8/0x1f0
fl_classify+0x355/0x360 [cls_flower]
__tcf_classify+0x1fd/0x330
tcf_classify+0x21c/0x3c0
sch_handle_ingress.constprop.0+0x2c5/0x500
__netif_receive_skb_core.constprop.0+0xb25/0x1510
__netif_receive_skb_list_core+0x220/0x4c0
netif_receive_skb_list_internal+0x446/0x620
napi_complete_done+0x157/0x3d0
gro_cell_poll+0xcf/0x100
__napi_poll+0x65/0x310
net_rx_action+0x30c/0x5c0
__do_softirq+0x14f/0x491
The ct may be dropped if a clash has been resolved but is still passed to
the tcf_ct_flow_table_process_conn function for further usage. This issue
can be fixed by retrieving ct from skb again after confirming conntrack. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix a potential use-after-free in bpf_link_free()
After commit 1a80dbcb2dba, bpf_link can be freed by
link->ops->dealloc_deferred, but the code still tests and uses
link->ops->dealloc afterward, which leads to a use-after-free as
reported by syzbot. Actually, one of them should be sufficient, so
just call one of them instead of both. Also add a WARN_ON() in case
of any problematic implementation. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: typec: tcpm: fix use-after-free case in tcpm_register_source_caps
There could be a potential use-after-free case in
tcpm_register_source_caps(). This could happen when:
* new (say invalid) source caps are advertised
* the existing source caps are unregistered
* tcpm_register_source_caps() returns with an error as
usb_power_delivery_register_capabilities() fails
This causes port->partner_source_caps to hold on to the now freed source
caps.
Reset port->partner_source_caps value to NULL after unregistering
existing source caps. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: ipset: Fix race between namespace cleanup and gc in the list:set type
Lion Ackermann reported that there is a race condition between namespace cleanup
in ipset and the garbage collection of the list:set type. The namespace
cleanup can destroy the list:set type of sets while the gc of the set type is
waiting to run in rcu cleanup. The latter uses data from the destroyed set which
thus leads use after free. The patch contains the following parts:
- When destroying all sets, first remove the garbage collectors, then wait
if needed and then destroy the sets.
- Fix the badly ordered "wait then remove gc" for the destroy a single set
case.
- Fix the missing rcu locking in the list:set type in the userspace test
case.
- Use proper RCU list handlings in the list:set type.
The patch depends on c1193d9bbbd3 (netfilter: ipset: Add list flush to cancel_gc). |
| In the Linux kernel, the following vulnerability has been resolved:
net/mlx5: Discard command completions in internal error
Fix use after free when FW completion arrives while device is in
internal error state. Avoid calling completion handler in this case,
since the device will flush the command interface and trigger all
completions manually.
Kernel log:
------------[ cut here ]------------
refcount_t: underflow; use-after-free.
...
RIP: 0010:refcount_warn_saturate+0xd8/0xe0
...
Call Trace:
<IRQ>
? __warn+0x79/0x120
? refcount_warn_saturate+0xd8/0xe0
? report_bug+0x17c/0x190
? handle_bug+0x3c/0x60
? exc_invalid_op+0x14/0x70
? asm_exc_invalid_op+0x16/0x20
? refcount_warn_saturate+0xd8/0xe0
cmd_ent_put+0x13b/0x160 [mlx5_core]
mlx5_cmd_comp_handler+0x5f9/0x670 [mlx5_core]
cmd_comp_notifier+0x1f/0x30 [mlx5_core]
notifier_call_chain+0x35/0xb0
atomic_notifier_call_chain+0x16/0x20
mlx5_eq_async_int+0xf6/0x290 [mlx5_core]
notifier_call_chain+0x35/0xb0
atomic_notifier_call_chain+0x16/0x20
irq_int_handler+0x19/0x30 [mlx5_core]
__handle_irq_event_percpu+0x4b/0x160
handle_irq_event+0x2e/0x80
handle_edge_irq+0x98/0x230
__common_interrupt+0x3b/0xa0
common_interrupt+0x7b/0xa0
</IRQ>
<TASK>
asm_common_interrupt+0x22/0x40 |
