| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Apache Hive 2.1.x before 2.1.2, 2.2.x before 2.2.1, and 2.3.x before 2.3.1 expose an interface through which masking policies can be defined on tables or views, e.g., using Apache Ranger. When a view is created over a given table, the policy enforcement does not happen correctly on the table for masked columns. |
| The tokenizer in QPDF 6.0.0 and 7.0.b1 is recursive for arrays and dictionaries, which allows remote attackers to cause a denial of service (stack consumption and segmentation fault) or possibly have unspecified other impact via a PDF document with a deep data structure, as demonstrated by a crash in QPDFObjectHandle::parseInternal in libqpdf/QPDFObjectHandle.cc. |
| An issue was discovered in certain Apple products. iOS before 11.2 is affected. macOS before 10.13.2 is affected. tvOS before 11.2 is affected. watchOS before 4.2 is affected. The issue involves the "Kernel" component. It allows attackers to bypass intended memory-read restrictions via a crafted app. |
| In res/res_rtp_asterisk.c in Asterisk 11.x before 11.25.2, 13.x before 13.17.1, and 14.x before 14.6.1 and Certified Asterisk 11.x before 11.6-cert17 and 13.x before 13.13-cert5, unauthorized data disclosure (media takeover in the RTP stack) is possible with careful timing by an attacker. The "strictrtp" option in rtp.conf enables a feature of the RTP stack that learns the source address of media for a session and drops any packets that do not originate from the expected address. This option is enabled by default in Asterisk 11 and above. The "nat" and "rtp_symmetric" options (for chan_sip and chan_pjsip, respectively) enable symmetric RTP support in the RTP stack. This uses the source address of incoming media as the target address of any sent media. This option is not enabled by default, but is commonly enabled to handle devices behind NAT. A change was made to the strict RTP support in the RTP stack to better tolerate late media when a reinvite occurs. When combined with the symmetric RTP support, this introduced an avenue where media could be hijacked. Instead of only learning a new address when expected, the new code allowed a new source address to be learned at all times. If a flood of RTP traffic was received, the strict RTP support would allow the new address to provide media, and (with symmetric RTP enabled) outgoing traffic would be sent to this new address, allowing the media to be hijacked. Provided the attacker continued to send traffic, they would continue to receive traffic as well. |
| A vulnerability in Cisco Jabber for Windows could allow an unauthenticated, local attacker to access sensitive communications made by the Jabber client. An attacker could exploit this vulnerability to gain information to conduct additional attacks. The vulnerability is due to the way Cisco Jabber for Windows handles random number generation for file folders. An attacker could exploit the vulnerability by fixing the random number data used to establish Secure Sockets Layer (SSL) connections between clients. An exploit could allow the attacker to decrypt secure communications made by the Cisco Jabber for Windows client. Cisco Bug IDs: CSCve44806. |
| A vulnerability in the Local Packet Transport Services (LPTS) ingress frame-processing functionality of Cisco IOS XR Software could allow an unauthenticated, remote attacker to cause one of the LPTS processes on an affected system to restart unexpectedly, resulting in a brief denial of service (DoS) condition. The vulnerability is due to incomplete LPTS frame validation by the affected software. An attacker could exploit this vulnerability by sending crafted XML requests to the management interface of an affected system. A successful exploit could allow the attacker to cause one of the LPTS processes on the affected system to restart unexpectedly, which would impact LPTS traffic and cause a brief DoS condition while the process restarts. Cisco Bug IDs: CSCvf76332. |
| A vulnerability in Cisco WebEx Meeting Center could allow an authenticated, remote attacker to initiate connections to arbitrary hosts, aka a "URL Redirection Vulnerability." The vulnerability is due to insufficient access control for HTTP traffic directed to the Cisco WebEx Meeting Center. An attacker could exploit this vulnerability by sending a malicious URL to the Cisco WebEx Meeting Center. An exploit could allow the attacker to connect to arbitrary hosts. Cisco Bug IDs: CSCvf63843. |
| A vulnerability in the cluster database (CDB) management component of Cisco Expressway Series Software and Cisco TelePresence Video Communication Server (VCS) Software could allow an authenticated, remote attacker to cause the CDB process on an affected system to restart unexpectedly, resulting in a temporary denial of service (DoS) condition. The vulnerability is due to incomplete input validation of URL requests by the REST API of the affected software. An attacker could exploit this vulnerability by sending a crafted URL to the REST API of the affected software on an affected system. A successful exploit could allow the attacker to cause the CDB process on the affected system to restart unexpectedly, resulting in a temporary DoS condition. Cisco Bug IDs: CSCve77571. |
| IBM OpenPages GRC Platform 7.1, 7.2, and 7.3 could allow an unauthenticated user to obtain sensitive information about the server that could be used in future attacks against the system. IBM X-Force ID: 126241. |
| A vulnerability in the web interface of Cisco Jabber could allow an authenticated, local attacker to retrieve user profile information from the affected software, which could lead to the disclosure of confidential information. The vulnerability is due to a lack of input and validation checks in the affected software. An attacker could exploit this vulnerability by authenticating locally to an affected system and then issuing specific commands to the affected software. A successful exploit could allow the attacker to view all profile information for a user instead of only certain Jabber parameters that should be visible. This vulnerability affects all releases of Cisco Jabber prior to Release 1.9.31. Cisco Bug IDs: CSCve52418. |
| A vulnerability in the web interface of Cisco Network Analysis Module Software could allow an unauthenticated, remote attacker to delete arbitrary files from an affected system, aka Directory Traversal. The vulnerability exists because the affected software does not perform proper input validation of HTTP requests that it receives and the software does not apply role-based access controls (RBACs) to requested HTTP URLs. An attacker could exploit this vulnerability by sending a crafted HTTP request to the affected software. A successful exploit could allow the attacker to delete arbitrary files from the affected system. Cisco Bug IDs: CSCvf41365. |
| A vulnerability in the implementation of the direct authentication feature in Cisco Adaptive Security Appliance (ASA) Software could allow an unauthenticated, remote attacker to cause an affected device to unexpectedly reload, resulting in a denial of service (DoS) condition. The vulnerability is due to incomplete input validation of the HTTP header. An attacker could exploit this vulnerability by sending a crafted HTTP request to the local IP address of an affected device. A successful exploit could allow the attacker to cause the affected device to reload. This vulnerability affects Cisco Adaptive Security Appliance (ASA) Software that is running on the following Cisco products: ASA 5500 Series Adaptive Security Appliances, ASA 5500-X Series Next-Generation Firewalls, ASA Services Module for Cisco Catalyst 6500 Series Switches and Cisco 7600 Series Routers, ASA 1000V Cloud Firewall, Adaptive Security Virtual Appliance (ASAv), Firepower 4110 Security Appliance, Firepower 9300 ASA Security Module, ISA 3000 Industrial Security Appliance. Cisco Bug IDs: CSCvd59063. |
| It was possible for double OGNL evaluation in FreeMarker templates through Struts FreeMarker tags to occur. An attacker who has restricted administration rights to Bamboo or who hosts a website that a Bamboo administrator visits, is able to exploit this vulnerability to execute Java code of their choice on systems that run a vulnerable version of Bamboo. All versions of Bamboo before 6.1.6 (the fixed version for 6.1.x) and from 6.2.0 before 6.2.5 (the fixed version for 6.2.x) are affected by this vulnerability. |
| A vulnerability in the detection engine parsing of IPv6 packets for Cisco Firepower System Software could allow an unauthenticated, remote attacker to cause high CPU utilization or to cause a denial of service (DoS) condition because the Snort process restarts unexpectedly. The vulnerability is due to improper input validation of the fields in the IPv6 extension header packet. An attacker could exploit this vulnerability by sending a malicious IPv6 packet to the detection engine on the targeted device. An exploit could allow the attacker to cause a DoS condition if the Snort process restarts and traffic inspection is bypassed or traffic is dropped. This vulnerability is specific to IPv6 traffic only. This vulnerability affects Cisco Firepower System Software Releases 6.0 and later when the software has one or more file action policies configured and is running on any of the following Cisco products: 3000 Series Industrial Security Appliances (ISR), Adaptive Security Appliance (ASA) 5500-X Series with FirePOWER Services, Adaptive Security Appliance (ASA) 5500-X Series Next-Generation Firewalls, Advanced Malware Protection (AMP) for Networks, 7000 Series Appliances, Advanced Malware Protection (AMP) for Networks, 8000 Series Appliances, FirePOWER 7000 Series Appliances, FirePOWER 8000 Series Appliances, Firepower Threat Defense for Integrated Services Routers (ISRs), Firepower 2100 Series Security Appliances, Firepower 4100 Series Security Appliances, Firepower 9300 Series Security Appliances, Virtual Next-Generation Intrusion Prevention System (NGIPSv) for VMware. Cisco Bug IDs: CSCvd34776. |
| IBM WebSphere Commerce Enterprise, Professional, Express, and Developer 7.0 and 8.0 could allow an authenticated attacker to obtain information such as user personal data. IBM X-Force ID: 128622. |
| Vulnerability in the Oracle GlassFish Server component of Oracle Fusion Middleware (subcomponent: Administration). Supported versions that are affected are 3.0.1 and 3.1.2. Easily exploitable vulnerability allows low privileged attacker with logon to the infrastructure where Oracle GlassFish Server executes to compromise Oracle GlassFish Server. Successful attacks of this vulnerability can result in unauthorized read access to a subset of Oracle GlassFish Server accessible data. CVSS v3.0 Base Score 3.3 (Confidentiality impacts). |
| A vulnerability in the web-based Wireless Controller GUI of Cisco IOS XE Software for Cisco 5760 Wireless LAN Controllers, Cisco Catalyst 4500E Supervisor Engine 8-E (Wireless) Switches, and Cisco New Generation Wireless Controllers (NGWC) 3850 could allow an authenticated, remote attacker to elevate their privileges on an affected device. The vulnerability is due to incomplete input validation of HTTP requests by the affected GUI, if the GUI connection state or protocol changes. An attacker could exploit this vulnerability by authenticating to the Wireless Controller GUI as a Lobby Administrator user of an affected device and subsequently changing the state or protocol for their connection to the GUI. A successful exploit could allow the attacker to elevate their privilege level to administrator and gain full control of the affected device. This vulnerability affects the following Cisco products if they are running Cisco IOS XE Software Release 3.7.0E, 3.7.1E, 3.7.2E, 3.7.3E, 3.7.4E, or 3.7.5E: Cisco 5760 Wireless LAN Controllers, Cisco Catalyst 4500E Supervisor Engine 8-E (Wireless) Switches, Cisco New Generation Wireless Controllers (NGWC) 3850. Cisco Bug IDs: CSCvd73746. |
| In Kanboard before 1.0.47, by altering form data, an authenticated user can at least see the names of tags of a private project of another user. |
| In the mxf_read_primer_pack function in libavformat/mxfdec.c in FFmpeg 3.3.3 -> 2.4, an integer signedness error might occur when a crafted file, which claims a large "item_num" field such as 0xffffffff, is provided. As a result, the variable "item_num" turns negative, bypassing the check for a large value. |
| A vulnerability in the ability for guest users to join meetings via a hyperlink with Cisco Meeting Server could allow an authenticated, remote attacker to enter a meeting with a hyperlink URL, even though access should be denied. The vulnerability is due to the incorrect implementation of the configuration setting Guest access via hyperlinks, which should allow the administrative user to prevent guest users from using hyperlinks to connect to meetings. An attacker could exploit this vulnerability by using a crafted hyperlink to connect to a meeting. An exploit could allow the attacker to connect directly to the meeting with a hyperlink, even though access should be denied. The attacker would still require a valid hyperlink and encoded secret identifier to be connected. Cisco Bug IDs: CSCve20873. |
