| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A vulnerability in the PROFINET feature of Cisco IOS Software and Cisco IOS XE Software could allow an unauthenticated, adjacent attacker to cause an affected device to crash and reload, resulting in a denial of service (DoS) condition on the device. The vulnerability is due to insufficient processing logic for crafted PROFINET packets that are sent to an affected device. An attacker could exploit this vulnerability by sending crafted PROFINET packets to an affected device for processing. A successful exploit could allow the attacker to cause the device to crash and reload, resulting in a DoS condition on the device. |
| A vulnerability in the Split DNS feature of Cisco IOS Software and Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause an affected device to reload, resulting in a denial of service (DoS) condition. The vulnerability occurs because the regular expression (regex) engine that is used with the Split DNS feature of affected releases may time out when it processes the DNS name list configuration. An attacker could exploit this vulnerability by trying to resolve an address or hostname that the affected device handles. A successful exploit could allow the attacker to cause the device to reload, resulting in a DoS condition. |
| A vulnerability in the RESTCONF and NETCONF-YANG access control list (ACL) function of Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause the device to reload. The vulnerability is due to incorrect processing of the ACL that is tied to the RESTCONF or NETCONF-YANG feature. An attacker could exploit this vulnerability by accessing the device using RESTCONF or NETCONF-YANG. A successful exploit could allow an attacker to cause the device to reload, resulting in a denial of service (DoS) condition. |
| A vulnerability in the persistent Telnet/Secure Shell (SSH) CLI of Cisco IOS XE Software could allow an authenticated, local attacker to gain shell access on an affected device and execute commands on the underlying operating system (OS) with root privileges. The vulnerability is due to insufficient enforcement of the consent token in authorizing shell access. An attacker could exploit this vulnerability by authenticating to the persistent Telnet/SSH CLI on an affected device and requesting shell access. A successful exploit could allow the attacker to gain shell access on the affected device and execute commands on the underlying OS with root privileges. |
| A vulnerability in the CLI of Cisco IOS XE Software could allow an authenticated, local attacker to inject a command to the underlying operating system that will execute with root privileges upon the next reboot of the device. The authenticated user must have privileged EXEC permissions on the device. The vulnerability is due to insufficient protection of values passed to a script that executes during device startup. An attacker could exploit this vulnerability by writing values to a specific file. A successful exploit could allow the attacker to execute commands with root privileges each time the affected device is restarted. |
| A vulnerability in the web UI feature of Cisco IOS XE Software could allow an authenticated, remote attacker to utilize parts of the web UI for which they are not authorized.The vulnerability is due to insufficient authorization of web UI access requests. An attacker could exploit this vulnerability by sending a crafted HTTP request to the web UI. A successful exploit could allow the attacker to utilize parts of the web UI for which they are not authorized. This could allow a Read-Only user to perform actions of an Admin user. |
| A vulnerability in the Control and Provisioning of Wireless Access Points (CAPWAP) protocol processing of Cisco IOS XE Software for Cisco Catalyst 9800 Series Wireless Controllers could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition of an affected device. The vulnerability is due to insufficient input validation during CAPWAP packet processing. An attacker could exploit this vulnerability by sending a crafted CAPWAP packet to an affected device, resulting in a buffer over-read. A successful exploit could allow the attacker to cause the affected device to crash and reload, resulting in a DoS condition on the affected device. |
| A vulnerability in the file system on the pluggable USB 3.0 Solid State Drive (SSD) for Cisco IOS XE Software could allow an authenticated, physical attacker to remove the USB 3.0 SSD and modify sensitive areas of the file system, including the namespace container protections. The vulnerability occurs because the USB 3.0 SSD control data is not stored on the internal boot flash. An attacker could exploit this vulnerability by removing the USB 3.0 SSD, modifying or deleting files on the USB 3.0 SSD by using another device, and then reinserting the USB 3.0 SSD on the original device. A successful exploit could allow the attacker to remove container protections and perform file actions outside the namespace of the container with root privileges. |
| A vulnerability in Cisco SD-WAN Solution Software could allow an unauthenticated, remote attacker to cause a buffer overflow on an affected device. The vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by sending crafted traffic to an affected device. A successful exploit could allow the attacker to gain access to information that they are not authorized to access, make changes to the system that they are not authorized to make, and execute commands on an affected system with privileges of the root user. |
| A vulnerability in the access control list (ACL) functionality of the standby route processor management interface of Cisco IOS XR Software could allow an unauthenticated, remote attacker to reach the configured IP addresses on the standby route processor management Gigabit Ethernet Management interface. The vulnerability is due to a logic error that was introduced in the Cisco IOS XR Software, which prevents the ACL from working when applied against the standby route processor management interface. An attacker could exploit this vulnerability by attempting to access the device through the standby route processor management interface. |
| A vulnerability in the enhanced Preboot eXecution Environment (PXE) boot loader for Cisco IOS XR 64-bit Software could allow an unauthenticated, remote attacker to execute unsigned code during the PXE boot process on an affected device. The PXE boot loader is part of the BIOS and runs over the management interface of hardware platforms that are running Cisco IOS XR Software only. The vulnerability exists because internal commands that are issued when the PXE network boot process is loading a software image are not properly verified. An attacker could exploit this vulnerability by compromising the PXE boot server and replacing a valid software image with a malicious one. Alternatively, the attacker could impersonate the PXE boot server and send a PXE boot reply with a malicious file. A successful exploit could allow the attacker to execute unsigned code on the affected device. Note: To fix this vulnerability, both the Cisco IOS XR Software and the BIOS must be upgraded. The BIOS code is included in Cisco IOS XR Software but might require additional installation steps. For further information, see the Fixed Software section of this advisory. |
| Multiple vulnerabilities in Cisco IOS Software for Cisco 809 and 829 Industrial Integrated Services Routers (Industrial ISRs) and Cisco 1000 Series Connected Grid Routers (CGR1000) could allow an unauthenticated, remote attacker or an authenticated, local attacker to execute arbitrary code on an affected system or cause an affected system to crash and reload. For more information about these vulnerabilities, see the Details section of this advisory. |
| Multiple vulnerabilities in the Cisco IOx application environment of Cisco 809 and 829 Industrial Integrated Services Routers (Industrial ISRs) and Cisco 1000 Series Connected Grid Routers (CGR1000) that are running Cisco IOS Software could allow an attacker to cause a denial of service (DoS) condition or execute arbitrary code with elevated privileges on an affected device. For more information about these vulnerabilities, see the Details section of this advisory. |
| A vulnerability in the Simple Network Management Protocol (SNMP) subsystem of Cisco IOS Software and Cisco IOS XE Software on Catalyst 4500 Series Switches could allow an authenticated, remote attacker to cause a denial of service (DoS) condition. The vulnerability is due to insufficient input validation when the software processes specific SNMP object identifiers. An attacker could exploit this vulnerability by sending a crafted SNMP packet to an affected device. A successful exploit could allow the attacker to cause the affected device to reload, resulting in a DoS condition. Note: To exploit this vulnerability by using SNMPv2c or earlier, the attacker must know the SNMP read-only community string for an affected system. To exploit this vulnerability by using SNMPv3, the attacker must know the user credentials for the affected system. |
| A vulnerability in the virtual console authentication of Cisco IOS Software for Cisco 809 and 829 Industrial Integrated Services Routers (Industrial ISRs) and Cisco 1000 Series Connected Grid Routers (CGR1000) could allow an authenticated but low-privileged, local attacker to log in to the Virtual Device Server (VDS) of an affected device by using a set of default credentials. The vulnerability is due to the presence of weak, hard-coded credentials. An attacker could exploit this vulnerability by authenticating to the targeted device and then connecting to VDS through the device’s virtual console by using the static credentials. A successful exploit could allow the attacker to access the Linux shell of VDS as the root user. |
| A vulnerability in the Simple Network Management Protocol (SNMP) implementation in Cisco ASR 920 Series Aggregation Services Router model ASR920-12SZ-IM could allow an authenticated, remote attacker to cause the device to reload. The vulnerability is due to incorrect handling of data that is returned for Cisco Discovery Protocol queries to SNMP. An attacker could exploit this vulnerability by sending a request for Cisco Discovery Protocol information by using SNMP. An exploit could allow the attacker to cause the affected device to reload, resulting in a denial of service (DoS) condition. |
| A vulnerability in the 802.1X feature of Cisco Catalyst 2960-L Series Switches and Cisco Catalyst CDB-8P Switches could allow an unauthenticated, adjacent attacker to forward broadcast traffic before being authenticated on the port. The vulnerability exists because broadcast traffic that is received on the 802.1X-enabled port is mishandled. An attacker could exploit this vulnerability by sending broadcast traffic on the port before being authenticated. A successful exploit could allow the attacker to send and receive broadcast traffic on the 802.1X-enabled port before authentication. |
| A vulnerability in the Internet Key Exchange Version 2 (IKEv2) implementation in Cisco IOS Software and Cisco IOS XE Software could allow an unauthenticated, remote attacker to prevent IKEv2 from establishing new security associations. The vulnerability is due to incorrect handling of crafted IKEv2 SA-Init packets. An attacker could exploit this vulnerability by sending crafted IKEv2 SA-Init packets to the affected device. An exploit could allow the attacker to cause the affected device to reach the maximum incoming negotiation limits and prevent further IKEv2 security associations from being formed. |
| A vulnerability in Role Based Access Control (RBAC) functionality of Cisco IOS XE Web Management Software could allow a Read-Only authenticated, remote attacker to execute commands or configuration changes as an Admin user. The vulnerability is due to incorrect handling of RBAC for the administration GUI. An attacker could exploit this vulnerability by sending a modified HTTP request to the affected device. An exploit could allow the attacker as a Read-Only user to execute CLI commands or configuration changes as if they were an Admin user. |
| A vulnerability in Security Group Tag Exchange Protocol (SXP) in Cisco IOS Software, Cisco IOS XE Software, and Cisco NX-OS Software could allow an unauthenticated, remote attacker to cause the affected device to reload, resulting in a denial of service (DoS) condition. The vulnerability exists because crafted SXP packets are mishandled. An attacker could exploit this vulnerability by sending specifically crafted SXP packets to the affected device. A successful exploit could allow the attacker to cause the affected device to reload, resulting in a DoS condition. |
