| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Trendnet AC2600 TEW-827DRU version 2.08B01 contains an improper access control configuration that could allow for a malicious firmware update. It is possible to manually install firmware that may be malicious in nature as there does not appear to be any signature validation done to determine if it is from a known and trusted source. This includes firmware updates that are done via the automated "check for updates" in the admin interface. If an attacker is able to masquerade as the update server, the device will not verify that the firmware updates downloaded are legitimate. |
| An issue in code signature validation was addressed with improved checks. This issue is fixed in macOS Big Sur 11.3, iOS 14.5 and iPadOS 14.5, watchOS 7.4, tvOS 14.5. A malicious application may be able to bypass Privacy preferences. |
| A vulnerability in the Multi-Pod or Multi-Site network configurations for Cisco Nexus 9000 Series Fabric Switches in Application Centric Infrastructure (ACI) mode could allow an unauthenticated, remote attacker to unexpectedly restart the device, resulting in a denial of service (DoS) condition. This vulnerability exists because TCP traffic sent to a specific port on an affected device is not properly sanitized. An attacker could exploit this vulnerability by sending crafted TCP data to a specific port that is listening on a public-facing IP address for the Multi-Pod or Multi-Site configuration. A successful exploit could allow the attacker to cause the device to restart unexpectedly, resulting in a DoS condition. |
| A vulnerability in the Image Signature Verification feature of Cisco SD-WAN Software could allow an authenticated, remote attacker with Administrator-level credentials to install a malicious software patch on an affected device.
The vulnerability is due to improper verification of digital signatures for patch images. An attacker could exploit this vulnerability by crafting an unsigned software patch to bypass signature checks and loading it on an affected device. A successful exploit could allow the attacker to boot a malicious software patch image.Cisco has released software updates that address the vulnerability described in this advisory. There are no workarounds that address this vulnerability. |
| A vulnerability in the software image verification functionality of Cisco IOS XE Software for the Cisco Catalyst 9000 Family of switches could allow an unauthenticated, physical attacker to execute unsigned code at system boot time. The vulnerability is due to an improper check in the code function that manages the verification of the digital signatures of system image files during the initial boot process. An attacker could exploit this vulnerability by loading unsigned software on an affected device. A successful exploit could allow the attacker to boot a malicious software image or execute unsigned code and bypass the image verification check part of the secure boot process of an affected device. To exploit this vulnerability, the attacker would need to have unauthenticated physical access to the device or obtain privileged access to the root shell on the device. |
| A vulnerability in the web UI feature of Cisco IOS XE Software could allow an unauthenticated, remote attacker to conduct a cross-site WebSocket hijacking (CSWSH) attack and cause a denial of service (DoS) condition on an affected device. This vulnerability is due to insufficient HTTP protections in the web UI on an affected device. An attacker could exploit this vulnerability by persuading an authenticated user of the web UI to follow a crafted link. A successful exploit could allow the attacker to corrupt memory on the affected device, forcing it to reload and causing a DoS condition. |
| Multiple vulnerabilities in the fast reload feature of Cisco IOS XE Software running on Cisco Catalyst 3850, Cisco Catalyst 9300, and Cisco Catalyst 9300L Series Switches could allow an authenticated, local attacker to either execute arbitrary code on the underlying operating system, install and boot a malicious software image, or execute unsigned binaries on an affected device. These vulnerabilities are due to improper checks performed by system boot routines. To exploit these vulnerabilities, the attacker would need privileged access to the CLI of the device. A successful exploit could allow the attacker to either execute arbitrary code on the underlying operating system or execute unsigned code and bypass the image verification check part of the secure boot process. For more information about these vulnerabilities, see the Details section of this advisory. |
| Multiple vulnerabilities in the fast reload feature of Cisco IOS XE Software running on Cisco Catalyst 3850, Cisco Catalyst 9300, and Cisco Catalyst 9300L Series Switches could allow an authenticated, local attacker to either execute arbitrary code on the underlying operating system, install and boot a malicious software image, or execute unsigned binaries on an affected device. These vulnerabilities are due to improper checks performed by system boot routines. To exploit these vulnerabilities, the attacker would need privileged access to the CLI of the device. A successful exploit could allow the attacker to either execute arbitrary code on the underlying operating system or execute unsigned code and bypass the image verification check part of the secure boot process. For more information about these vulnerabilities, see the Details section of this advisory. |
| A vulnerability in the interprocess communication (IPC) channel of Cisco AnyConnect Secure Mobility Client for Windows could allow an authenticated, local attacker to perform a DLL hijacking attack on an affected device if the VPN Posture (HostScan) Module is installed on the AnyConnect client. This vulnerability is due to insufficient validation of resources that are loaded by the application at run time. An attacker could exploit this vulnerability by sending a crafted IPC message to the AnyConnect process. A successful exploit could allow the attacker to execute arbitrary code on the affected machine with SYSTEM privileges. To exploit this vulnerability, the attacker needs valid credentials on the Windows system. |
| Multiple vulnerabilities in Cisco Network Convergence System (NCS) 540 Series Routers, only when running Cisco IOS XR NCS540L software images, and Cisco IOS XR Software for the Cisco 8000 Series Routers could allow an authenticated, local attacker to execute unsigned code during the boot process on an affected device. For more information about these vulnerabilities, see the Details section of this advisory. |
| A vulnerability in the Link Layer Discovery Protocol (LLDP) for Nexus 9000 Series Fabric Switches in Application Centric Infrastructure (ACI) mode could allow an unauthenticated, adjacent attacker to disable switching on a small form-factor pluggable (SFP) interface. This vulnerability is due to incomplete validation of the source of a received LLDP packet. An attacker could exploit this vulnerability by sending a crafted LLDP packet on an SFP interface to an affected device. A successful exploit could allow the attacker to disable switching on the SFP interface, which could disrupt network traffic. |
| Multiple vulnerabilities in Cisco Network Convergence System (NCS) 540 Series Routers, only when running Cisco IOS XR NCS540L software images, and Cisco IOS XR Software for the Cisco 8000 Series Routers could allow an authenticated, local attacker to execute unsigned code during the boot process on an affected device. For more information about these vulnerabilities, see the Details section of this advisory. |
| Improper verification of cryptographic signature in the installer for some Intel(R) Wireless Bluetooth(R) and Killer(TM) Bluetooth(R) products in Windows 10 may allow an authenticated user to potentially enable denial of service via local access. |
| A logic issue was addressed with improved restrictions. This issue is fixed in iOS 13.6 and iPadOS 13.6, Safari 13.1.2. A malicious attacker may cause Safari to suggest a password for the wrong domain. |
| An issue existed in the handling of iMessage tapbacks. The issue was resolved with additional verification. This issue is fixed in iOS 13.6 and iPadOS 13.6, macOS Catalina 10.15.6, tvOS 13.4.8, watchOS 6.2.8. A user that is removed from an iMessage group could rejoin the group. |
| Whale Browser Installer before 1.2.0.5 versions don't support signature verification for Flash installer. |
| golang.org/x/crypto before v0.0.0-20200220183623-bac4c82f6975 for Go allows a panic during signature verification in the golang.org/x/crypto/ssh package. A client can attack an SSH server that accepts public keys. Also, a server can attack any SSH client. |
| WS5800-10 version 10.0.3.25 has a denial of service vulnerability. Due to improper verification of specific message, an attacker may exploit this vulnerability to cause specific function to become abnormal. |
| HUAWEI P30 with versions earlier than 10.1.0.135(C00E135R2P11) have an improper signature verification vulnerability. The system does not improper check signature of specific software package, an attacker may exploit this vulnerability to load a crafted software package to the device. |
| There is a improper privilege management vulnerability in some Huawei smartphone. Successful exploitation of this vulnerability can cause information disclosure and malfunctions due to insufficient verification of data authenticity. |
