| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
PCI: altera: Protect root bus removal with rescan lock
Hold the pci_rescan_remove_lock lock while stopping and removing a root bus
to avoid racing with concurrent rescan or hotplug operations triggered via
sysfs. Such races may lead to use-after-free issues or system crashes.
[bhelgaas: commit log] |
| In the Linux kernel, the following vulnerability has been resolved:
PCI: iproc: Protect root bus removal with rescan lock
Hold the pci_rescan_remove_lock lock while stopping and removing a root bus
to avoid racing with concurrent rescan or hotplug operations triggered via
sysfs. Such races may lead to use-after-free issues or system crashes.
[bhelgaas: commit log] |
| In the Linux kernel, the following vulnerability has been resolved:
tls: reject the combination of TLS and sockmap
TLS and sockmap (BPF psock) integration hides a lot of latent bugs.
Bugs which may be more or less relevant for real users but they
are definitely exploitable.
We could not find anyone actively using this integration so let's
reject this config. Adding a TLS socket to a sockmap was already
rejected by sk_psock_init() through the inet_csk_has_ulp() check.
We need to reject the attempts to configure the TLS keys (rather
than adding the ULP itself) because checking prior to the ULP
installation is tricky without risking a race with sockmap getting
added in parallel (sockmap does not hold the socket lock).
This patch is a minimal rejection of the feature. Subsequent patch
in the series will do a light dead code removal. Full cleanup would
require a major rewrite of the Tx path, we don't need skmsg any more. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: fix buffer overflow during vBIOS update
Clamp the buffer postion to write by setting the bin attribute
to the maximum buffer size so that VFS layer will block the
out-of-bounds accessing. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv6: addrconf: fix temp address generation after prefix deprecation
When a router temporarily deprecates an IPv6 prefix (either by sending a
Router Advertisement with Preferred Lifetime = 0 or by letting the
lifetime expire) and later restores it, the kernel permanently loses its
ability to generate temporary privacy addresses (RFC 8981) for that
prefix.
This happens because the address worker attempts to generate a
replacement temporary address when the current one nears expiration. As
the base prefix is deprecated already, the generation fails after
marking the temporary address as already having spawned a replacement
(ifp->regen_count++).
When the router eventually restores the prefix, the temporary address
becomes active again. However, once it naturally expires, the address
worker sees this temporary address already tried to generate one and
skips the regeneration.
Fix the issue by resetting the regen_count check of the latest temp
address generated for the prefix updated by the incoming RA. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/counter: Fix num_counters leak on bind_qp failure in alloc_and_bind()
When __rdma_counter_bind_qp() fails in alloc_and_bind(), the error path
jumps to err_mode which frees the counter without decrementing
port_counter->num_counters. The only place that decrements is
rdma_counter_free(), which is unreachable since the counter was never
successfully bound.
This leak accumulates across repeated failures, permanently preventing
the port from switching to AUTO mode (-EBUSY in __counter_set_mode())
and blocking the MANUAL→NONE auto-revert in rdma_counter_free(). When
the mode was NONE before the call, the MANUAL mode set by
__counter_set_mode() also leaks since the revert logic is never
reached.
Add an err_bind label between the num_counters increment and the
existing err_mode label. It decrements num_counters and mirrors the
MANUAL→NONE revert from rdma_counter_free(), ensuring the port state
is fully restored on bind failure. |
| In the Linux kernel, the following vulnerability has been resolved:
jfs: handle set_blocksize failures
jfs uses buffer_heads, which don't handle block size > PAGE_SIZE well.
Without this, mounting we will hit the
BUG_ON(offset >= folio_size(folio));
in folio_set_bh on the first __bread_gfp call. |
| In the Linux kernel, the following vulnerability has been resolved:
affs: handle set_blocksize failures
affs uses buffer_heads, which don't handle block size > PAGE_SIZE well.
Without this, mounting we will hit the
BUG_ON(offset >= folio_size(folio));
in folio_set_bh on the first __bread_gfp call. |
| In the Linux kernel, the following vulnerability has been resolved:
net/rds: Don't sleep inside rds_ib_conn_path_shutdown
New rds rdma self tests exposed a hang when tearing down
the ib network configs. This is caused by the shutdown worker
thread sleeping on the wait_event call, which blocks other work
items in the queue. Fix this by changing wait_event to
wait_event timeout, and looping until the wait check succeeds. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/xe: Fix null pointer dereference in devcoredump cleanup
In xe_devcoredump_snapshot_free(), ss->gt may be NULL when the snapshot
was never fully populated (e.g., when cleanup is triggered without a
prior capture). Guard the xe_guc_capture_put_matched_nodes() call with
IS_ERR_OR_NULL() to prevent a null dereference.
In xe_devcoredump_free(), the deferred work is only queued when a
coredump is captured, so guard cancel_work_sync() with a check on
coredump->captured. |
| Krayin CRM through 2.2.6 contains a stored client-side template injection vulnerability that allows authenticated attackers to execute arbitrary JavaScript in other users' browsers by injecting Vue.js template expressions into the person name field. Attackers can craft a person name containing double-brace template syntax that reaches the Vue template compiler, enabling prototype chain traversal to retrieve the Function constructor and execute attacker-supplied JavaScript in the application origin for every user who views the affected person record. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: Bound GPIO I2C table entry count from VBIOS
Reject undersized tables and cap the derived entry count
to AMDGPU_MAX_I2C_BUS so we do not overrun adev->i2c_bus[]
or walk an absurd number of entries on corrupt size fields. |
| In the Linux kernel, the following vulnerability has been resolved:
coresight: perf: Retrieve path and source from event data
ETM perf callbacks currently use the per-CPU csdev_src pointer, which
can race with updates during device registration and unregistration.
The AUX setup already builds and stores the path in the event data.
Use this path to retrieve the source instead of csdev_src to avoid
the race.
Export coresight_get_source() and add etm_event_get_ctxt_path() to
retrieve the context's path and its source with READ_ONCE() /
WRITE_ONCE() accessors. Give the comments to explain why this
approach is safe when pause or resume callbacks preempt the disable
callback (e.g. via NMI). |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: rtw89: phy: check length before parsing PHY status IE
Hardware might report PHY status IE with unexpected length, and parser
might access out of range. Check the length ahead. |
| In the Linux kernel, the following vulnerability has been resolved:
genirq/proc: Size interrupt directory names for 10-digit interrupt numbers
/proc/irq/<n>/ directory names are built in `char name[10]` buffers
with `sprintf(name, "%u", irq)`.
Ten-digit IRQ numbers already need 11 bytes including the trailing NUL, and
current sparse-IRQ configurations allow interrupt numbers in that range.
Size the temporary name buffer for the current decimal form and switch
to bounded formatting when creating or removing the proc entry. |
| In the Linux kernel, the following vulnerability has been resolved:
spi: spi-qcom-qspi: Fix incomplete error handling in runtime PM
The runtime PM functions had incomplete error handling that could leave the
system in an inconsistent state. If any operation failed midway through
suspend or resume, some resources would be left in the wrong state while
others were already changed, leading to potential clock/power imbalances.
Reorder the suspend/resume sequences to avoid brownout risk by ensuring the
performance state is set appropriately before clocks are enabled and clocks
are disabled before dropping the performance state.
Fix by adding proper error checking for all operations and using goto-based
cleanup to ensure all successfully acquired resources are properly released
on any error. |
| An information exposure vulnerability in the job scheduling component of SANnav allows sensitive credentials to be written to application logs in plain text. When scheduled support save jobs or related operational tasks are executed, sensitive parameters including external server passwords and archive protection keys are logged without proper masking. A local or authenticated user with access to application logs or support bundles can view these cleartext credentials, potentially leading to unauthorized access to remote backup targets or protected archives. |
| A logic flaw in Java cache key handling object comparison handling could lead to improper identifier resolution when processing specific user account structures. The issue has been remediated by updating the internal comparison routines to ensure accurate object evaluation and prevent potential identity mismatch conditions. |
| Incorrect Authorization (CWE-863) in project name normalization (ProjectUtil.stripGitSuffix) and ProjectCache eviction logic (ProjectCacheImpl) in Gerrit Code Review versions 2.16.0 through 3.12.9, 3.13.0 through 3.13.8, and 3.14.0 through 3.14.2 allows an authenticated user (or an unauthenticated user if the repository was previously public) to cause unauthorized disclosure of private repository content and durable restoration of revoked project-owner administrative privileges via crafted requests using repeated .git suffixes (such as project.git.git) across REST APIs, Gitiles, or SSH Git commands. Because Gerrit strips only a single terminal .git suffix when constructing the logical ProjectCache key while JGit (FileKey.lenient) resolves the suffixed alias to the same canonical bare repository on disk, revoking read access or removing owner rules on the canonical project name fails to evict the cached alias ProjectState during the cache validity window, enabling reads of newly created private commits or writes to refs/meta/config. This issue is fixed in Gerrit Code Review versions 3.12.10, 3.13.9, and 3.14.3. |
| Uncontrolled Resource Consumption (CWE-400 / CWE-407) in the ANTLR 3 search query parser (QueryParser / Query.g) in Gerrit Code Review versions 2.0.19 through 3.12.9, 3.13.0 through 3.13.8, and 3.14.0 through 3.14.2 allows an unauthenticated remote attacker (or an authenticated user if anonymous read access is disabled) to cause a persistent denial of service (CPU exhaustion and HTTP worker thread pool starvation requiring a server restart) via crafted search queries containing deeply nested parentheses sent to query evaluation endpoints (/changes/?q=, /accounts/?q=, /groups/?query=, /projects/?query=, /Documentation/?q=, /changes/{id}/query?expression=, or SSH gerrit query). Because syntactic predicates in conditionOr and conditionAnd recurse via conditionBase without memoization prior to capability or visibility checks and worker threads do not abort when the client disconnects, a small number of requests (such as 25 requests matching default httpd.maxThreads) can permanently pin all HTTP worker threads. This issue is fixed in Gerrit Code Review versions 3.12.10, 3.13.9, and 3.14.3. |
