| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: qla2xxx: Fix crash in qla2xxx_mqueuecommand()
RIP: 0010:kmem_cache_free+0xfa/0x1b0
Call Trace:
qla2xxx_mqueuecommand+0x2b5/0x2c0 [qla2xxx]
scsi_queue_rq+0x5e2/0xa40
__blk_mq_try_issue_directly+0x128/0x1d0
blk_mq_request_issue_directly+0x4e/0xb0
Fix incorrect call to free srb in qla2xxx_mqueuecommand(), as srb is now
allocated by upper layers. This fixes smatch warning of srb unintended
free. |
| In the Linux kernel, the following vulnerability has been resolved:
spi: Fix use-after-free with devm_spi_alloc_*
We can't rely on the contents of the devres list during
spi_unregister_controller(), as the list is already torn down at the
time we perform devres_find() for devm_spi_release_controller. This
causes devices registered with devm_spi_alloc_{master,slave}() to be
mistakenly identified as legacy, non-devm managed devices and have their
reference counters decremented below 0.
------------[ cut here ]------------
WARNING: CPU: 1 PID: 660 at lib/refcount.c:28 refcount_warn_saturate+0x108/0x174
[<b0396f04>] (refcount_warn_saturate) from [<b03c56a4>] (kobject_put+0x90/0x98)
[<b03c5614>] (kobject_put) from [<b0447b4c>] (put_device+0x20/0x24)
r4:b6700140
[<b0447b2c>] (put_device) from [<b07515e8>] (devm_spi_release_controller+0x3c/0x40)
[<b07515ac>] (devm_spi_release_controller) from [<b045343c>] (release_nodes+0x84/0xc4)
r5:b6700180 r4:b6700100
[<b04533b8>] (release_nodes) from [<b0454160>] (devres_release_all+0x5c/0x60)
r8:b1638c54 r7:b117ad94 r6:b1638c10 r5:b117ad94 r4:b163dc10
[<b0454104>] (devres_release_all) from [<b044e41c>] (__device_release_driver+0x144/0x1ec)
r5:b117ad94 r4:b163dc10
[<b044e2d8>] (__device_release_driver) from [<b044f70c>] (device_driver_detach+0x84/0xa0)
r9:00000000 r8:00000000 r7:b117ad94 r6:b163dc54 r5:b1638c10 r4:b163dc10
[<b044f688>] (device_driver_detach) from [<b044d274>] (unbind_store+0xe4/0xf8)
Instead, determine the devm allocation state as a flag on the
controller which is guaranteed to be stable during cleanup. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Reject struct_ops registration that uses module ptr and the module btf_id is missing
There is a UAF report in the bpf_struct_ops when CONFIG_MODULES=n.
In particular, the report is on tcp_congestion_ops that has
a "struct module *owner" member.
For struct_ops that has a "struct module *owner" member,
it can be extended either by the regular kernel module or
by the bpf_struct_ops. bpf_try_module_get() will be used
to do the refcounting and different refcount is done
based on the owner pointer. When CONFIG_MODULES=n,
the btf_id of the "struct module" is missing:
WARN: resolve_btfids: unresolved symbol module
Thus, the bpf_try_module_get() cannot do the correct refcounting.
Not all subsystem's struct_ops requires the "struct module *owner" member.
e.g. the recent sched_ext_ops.
This patch is to disable bpf_struct_ops registration if
the struct_ops has the "struct module *" member and the
"struct module" btf_id is missing. The btf_type_is_fwd() helper
is moved to the btf.h header file for this test.
This has happened since the beginning of bpf_struct_ops which has gone
through many changes. The Fixes tag is set to a recent commit that this
patch can apply cleanly. Considering CONFIG_MODULES=n is not
common and the age of the issue, targeting for bpf-next also. |
| In the Linux kernel, the following vulnerability has been resolved:
memory: tegra20-emc: fix an OF node reference bug in tegra_emc_find_node_by_ram_code()
As of_find_node_by_name() release the reference of the argument device
node, tegra_emc_find_node_by_ram_code() releases some device nodes while
still in use, resulting in possible UAFs. According to the bindings and
the in-tree DTS files, the "emc-tables" node is always device's child
node with the property "nvidia,use-ram-code", and the "lpddr2" node is a
child of the "emc-tables" node. Thus utilize the
for_each_child_of_node() macro and of_get_child_by_name() instead of
of_find_node_by_name() to simplify the code.
This bug was found by an experimental verification tool that I am
developing.
[krzysztof: applied v1, adjust the commit msg to incorporate v2 parts] |
| In the Linux kernel, the following vulnerability has been resolved:
media: uvcvideo: Remove dangling pointers
When an async control is written, we copy a pointer to the file handle
that started the operation. That pointer will be used when the device is
done. Which could be anytime in the future.
If the user closes that file descriptor, its structure will be freed,
and there will be one dangling pointer per pending async control, that
the driver will try to use.
Clean all the dangling pointers during release().
To avoid adding a performance penalty in the most common case (no async
operation), a counter has been introduced with some logic to make sure
that it is properly handled. |
| In the Linux kernel, the following vulnerability has been resolved:
i3c: dw: Fix use-after-free in dw_i3c_master driver due to race condition
In dw_i3c_common_probe, &master->hj_work is bound with
dw_i3c_hj_work. And dw_i3c_master_irq_handler can call
dw_i3c_master_irq_handle_ibis function to start the work.
If we remove the module which will call dw_i3c_common_remove to
make cleanup, it will free master->base through i3c_master_unregister
while the work mentioned above will be used. The sequence of operations
that may lead to a UAF bug is as follows:
CPU0 CPU1
| dw_i3c_hj_work
dw_i3c_common_remove |
i3c_master_unregister(&master->base) |
device_unregister(&master->dev) |
device_release |
//free master->base |
| i3c_master_do_daa(&master->base)
| //use master->base
Fix it by ensuring that the work is canceled before proceeding with
the cleanup in dw_i3c_common_remove. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/mediatek: Set private->all_drm_private[i]->drm to NULL if mtk_drm_bind returns err
The pointer need to be set to NULL, otherwise KASAN complains about
use-after-free. Because in mtk_drm_bind, all private's drm are set
as follows.
private->all_drm_private[i]->drm = drm;
And drm will be released by drm_dev_put in case mtk_drm_kms_init returns
failure. However, the shutdown path still accesses the previous allocated
memory in drm_atomic_helper_shutdown.
[ 84.874820] watchdog: watchdog0: watchdog did not stop!
[ 86.512054] ==================================================================
[ 86.513162] BUG: KASAN: use-after-free in drm_atomic_helper_shutdown+0x33c/0x378
[ 86.514258] Read of size 8 at addr ffff0000d46fc068 by task shutdown/1
[ 86.515213]
[ 86.515455] CPU: 1 UID: 0 PID: 1 Comm: shutdown Not tainted 6.13.0-rc1-mtk+gfa1a78e5d24b-dirty #55
[ 86.516752] Hardware name: Unknown Product/Unknown Product, BIOS 2022.10 10/01/2022
[ 86.517960] Call trace:
[ 86.518333] show_stack+0x20/0x38 (C)
[ 86.518891] dump_stack_lvl+0x90/0xd0
[ 86.519443] print_report+0xf8/0x5b0
[ 86.519985] kasan_report+0xb4/0x100
[ 86.520526] __asan_report_load8_noabort+0x20/0x30
[ 86.521240] drm_atomic_helper_shutdown+0x33c/0x378
[ 86.521966] mtk_drm_shutdown+0x54/0x80
[ 86.522546] platform_shutdown+0x64/0x90
[ 86.523137] device_shutdown+0x260/0x5b8
[ 86.523728] kernel_restart+0x78/0xf0
[ 86.524282] __do_sys_reboot+0x258/0x2f0
[ 86.524871] __arm64_sys_reboot+0x90/0xd8
[ 86.525473] invoke_syscall+0x74/0x268
[ 86.526041] el0_svc_common.constprop.0+0xb0/0x240
[ 86.526751] do_el0_svc+0x4c/0x70
[ 86.527251] el0_svc+0x4c/0xc0
[ 86.527719] el0t_64_sync_handler+0x144/0x168
[ 86.528367] el0t_64_sync+0x198/0x1a0
[ 86.528920]
[ 86.529157] The buggy address belongs to the physical page:
[ 86.529972] page: refcount:0 mapcount:0 mapping:0000000000000000 index:0xffff0000d46fd4d0 pfn:0x1146fc
[ 86.531319] flags: 0xbfffc0000000000(node=0|zone=2|lastcpupid=0xffff)
[ 86.532267] raw: 0bfffc0000000000 0000000000000000 dead000000000122 0000000000000000
[ 86.533390] raw: ffff0000d46fd4d0 0000000000000000 00000000ffffffff 0000000000000000
[ 86.534511] page dumped because: kasan: bad access detected
[ 86.535323]
[ 86.535559] Memory state around the buggy address:
[ 86.536265] ffff0000d46fbf00: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 86.537314] ffff0000d46fbf80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 86.538363] >ffff0000d46fc000: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 86.544733] ^
[ 86.551057] ffff0000d46fc080: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 86.557510] ffff0000d46fc100: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 86.563928] ==================================================================
[ 86.571093] Disabling lock debugging due to kernel taint
[ 86.577642] Unable to handle kernel paging request at virtual address e0e9c0920000000b
[ 86.581834] KASAN: maybe wild-memory-access in range [0x0752049000000058-0x075204900000005f]
... |
| In the Linux kernel, the following vulnerability has been resolved:
ila: serialize calls to nf_register_net_hooks()
syzbot found a race in ila_add_mapping() [1]
commit 031ae72825ce ("ila: call nf_unregister_net_hooks() sooner")
attempted to fix a similar issue.
Looking at the syzbot repro, we have concurrent ILA_CMD_ADD commands.
Add a mutex to make sure at most one thread is calling nf_register_net_hooks().
[1]
BUG: KASAN: slab-use-after-free in rht_key_hashfn include/linux/rhashtable.h:159 [inline]
BUG: KASAN: slab-use-after-free in __rhashtable_lookup.constprop.0+0x426/0x550 include/linux/rhashtable.h:604
Read of size 4 at addr ffff888028f40008 by task dhcpcd/5501
CPU: 1 UID: 0 PID: 5501 Comm: dhcpcd Not tainted 6.13.0-rc4-syzkaller-00054-gd6ef8b40d075 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024
Call Trace:
<IRQ>
__dump_stack lib/dump_stack.c:94 [inline]
dump_stack_lvl+0x116/0x1f0 lib/dump_stack.c:120
print_address_description mm/kasan/report.c:378 [inline]
print_report+0xc3/0x620 mm/kasan/report.c:489
kasan_report+0xd9/0x110 mm/kasan/report.c:602
rht_key_hashfn include/linux/rhashtable.h:159 [inline]
__rhashtable_lookup.constprop.0+0x426/0x550 include/linux/rhashtable.h:604
rhashtable_lookup include/linux/rhashtable.h:646 [inline]
rhashtable_lookup_fast include/linux/rhashtable.h:672 [inline]
ila_lookup_wildcards net/ipv6/ila/ila_xlat.c:127 [inline]
ila_xlat_addr net/ipv6/ila/ila_xlat.c:652 [inline]
ila_nf_input+0x1ee/0x620 net/ipv6/ila/ila_xlat.c:185
nf_hook_entry_hookfn include/linux/netfilter.h:154 [inline]
nf_hook_slow+0xbb/0x200 net/netfilter/core.c:626
nf_hook.constprop.0+0x42e/0x750 include/linux/netfilter.h:269
NF_HOOK include/linux/netfilter.h:312 [inline]
ipv6_rcv+0xa4/0x680 net/ipv6/ip6_input.c:309
__netif_receive_skb_one_core+0x12e/0x1e0 net/core/dev.c:5672
__netif_receive_skb+0x1d/0x160 net/core/dev.c:5785
process_backlog+0x443/0x15f0 net/core/dev.c:6117
__napi_poll.constprop.0+0xb7/0x550 net/core/dev.c:6883
napi_poll net/core/dev.c:6952 [inline]
net_rx_action+0xa94/0x1010 net/core/dev.c:7074
handle_softirqs+0x213/0x8f0 kernel/softirq.c:561
__do_softirq kernel/softirq.c:595 [inline]
invoke_softirq kernel/softirq.c:435 [inline]
__irq_exit_rcu+0x109/0x170 kernel/softirq.c:662
irq_exit_rcu+0x9/0x30 kernel/softirq.c:678
instr_sysvec_apic_timer_interrupt arch/x86/kernel/apic/apic.c:1049 [inline]
sysvec_apic_timer_interrupt+0xa4/0xc0 arch/x86/kernel/apic/apic.c:1049 |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: flush delalloc workers queue before stopping cleaner kthread during unmount
During the unmount path, at close_ctree(), we first stop the cleaner
kthread, using kthread_stop() which frees the associated task_struct, and
then stop and destroy all the work queues. However after we stopped the
cleaner we may still have a worker from the delalloc_workers queue running
inode.c:submit_compressed_extents(), which calls btrfs_add_delayed_iput(),
which in turn tries to wake up the cleaner kthread - which was already
destroyed before, resulting in a use-after-free on the task_struct.
Syzbot reported this with the following stack traces:
BUG: KASAN: slab-use-after-free in __lock_acquire+0x78/0x2100 kernel/locking/lockdep.c:5089
Read of size 8 at addr ffff8880259d2818 by task kworker/u8:3/52
CPU: 1 UID: 0 PID: 52 Comm: kworker/u8:3 Not tainted 6.13.0-rc1-syzkaller-00002-gcdd30ebb1b9f #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024
Workqueue: btrfs-delalloc btrfs_work_helper
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:94 [inline]
dump_stack_lvl+0x241/0x360 lib/dump_stack.c:120
print_address_description mm/kasan/report.c:378 [inline]
print_report+0x169/0x550 mm/kasan/report.c:489
kasan_report+0x143/0x180 mm/kasan/report.c:602
__lock_acquire+0x78/0x2100 kernel/locking/lockdep.c:5089
lock_acquire+0x1ed/0x550 kernel/locking/lockdep.c:5849
__raw_spin_lock_irqsave include/linux/spinlock_api_smp.h:110 [inline]
_raw_spin_lock_irqsave+0xd5/0x120 kernel/locking/spinlock.c:162
class_raw_spinlock_irqsave_constructor include/linux/spinlock.h:551 [inline]
try_to_wake_up+0xc2/0x1470 kernel/sched/core.c:4205
submit_compressed_extents+0xdf/0x16e0 fs/btrfs/inode.c:1615
run_ordered_work fs/btrfs/async-thread.c:288 [inline]
btrfs_work_helper+0x96f/0xc40 fs/btrfs/async-thread.c:324
process_one_work kernel/workqueue.c:3229 [inline]
process_scheduled_works+0xa66/0x1840 kernel/workqueue.c:3310
worker_thread+0x870/0xd30 kernel/workqueue.c:3391
kthread+0x2f0/0x390 kernel/kthread.c:389
ret_from_fork+0x4b/0x80 arch/x86/kernel/process.c:147
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244
</TASK>
Allocated by task 2:
kasan_save_stack mm/kasan/common.c:47 [inline]
kasan_save_track+0x3f/0x80 mm/kasan/common.c:68
unpoison_slab_object mm/kasan/common.c:319 [inline]
__kasan_slab_alloc+0x66/0x80 mm/kasan/common.c:345
kasan_slab_alloc include/linux/kasan.h:250 [inline]
slab_post_alloc_hook mm/slub.c:4104 [inline]
slab_alloc_node mm/slub.c:4153 [inline]
kmem_cache_alloc_node_noprof+0x1d9/0x380 mm/slub.c:4205
alloc_task_struct_node kernel/fork.c:180 [inline]
dup_task_struct+0x57/0x8c0 kernel/fork.c:1113
copy_process+0x5d1/0x3d50 kernel/fork.c:2225
kernel_clone+0x223/0x870 kernel/fork.c:2807
kernel_thread+0x1bc/0x240 kernel/fork.c:2869
create_kthread kernel/kthread.c:412 [inline]
kthreadd+0x60d/0x810 kernel/kthread.c:767
ret_from_fork+0x4b/0x80 arch/x86/kernel/process.c:147
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244
Freed by task 24:
kasan_save_stack mm/kasan/common.c:47 [inline]
kasan_save_track+0x3f/0x80 mm/kasan/common.c:68
kasan_save_free_info+0x40/0x50 mm/kasan/generic.c:582
poison_slab_object mm/kasan/common.c:247 [inline]
__kasan_slab_free+0x59/0x70 mm/kasan/common.c:264
kasan_slab_free include/linux/kasan.h:233 [inline]
slab_free_hook mm/slub.c:2338 [inline]
slab_free mm/slub.c:4598 [inline]
kmem_cache_free+0x195/0x410 mm/slub.c:4700
put_task_struct include/linux/sched/task.h:144 [inline]
delayed_put_task_struct+0x125/0x300 kernel/exit.c:227
rcu_do_batch kernel/rcu/tree.c:2567 [inline]
rcu_core+0xaaa/0x17a0 kernel/rcu/tree.c:2823
handle_softirqs+0x2d4/0x9b0 kernel/softirq.c:554
run_ksoftirqd+0xca/0x130 kernel/softirq.c:943
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
ocfs2: fix slab-use-after-free due to dangling pointer dqi_priv
When mounting ocfs2 and then remounting it as read-only, a
slab-use-after-free occurs after the user uses a syscall to
quota_getnextquota. Specifically, sb_dqinfo(sb, type)->dqi_priv is the
dangling pointer.
During the remounting process, the pointer dqi_priv is freed but is never
set as null leaving it to be accessed. Additionally, the read-only option
for remounting sets the DQUOT_SUSPENDED flag instead of setting the
DQUOT_USAGE_ENABLED flags. Moreover, later in the process of getting the
next quota, the function ocfs2_get_next_id is called and only checks the
quota usage flags and not the quota suspended flags.
To fix this, I set dqi_priv to null when it is freed after remounting with
read-only and put a check for DQUOT_SUSPENDED in ocfs2_get_next_id.
[akpm@linux-foundation.org: coding-style cleanups] |
| In the Linux kernel, the following vulnerability has been resolved:
drm: adv7511: Fix use-after-free in adv7533_attach_dsi()
The host_node pointer was assigned and freed in adv7533_parse_dt(), and
later, adv7533_attach_dsi() uses the same. Fix this use-after-free issue
by dropping of_node_put() in adv7533_parse_dt() and calling of_node_put()
in error path of probe() and also in the remove(). |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/siw: Remove direct link to net_device
Do not manage a per device direct link to net_device. Rely
on associated ib_devices net_device management, not doubling
the effort locally. A badly managed local link to net_device
was causing a 'KASAN: slab-use-after-free' exception during
siw_query_port() call. |
| In the Linux kernel, the following vulnerability has been resolved:
net/mlx5e: Skip restore TC rules for vport rep without loaded flag
During driver unload, unregister_netdev is called after unloading
vport rep. So, the mlx5e_rep_priv is already freed while trying to get
rpriv->netdev, or walk rpriv->tc_ht, which results in use-after-free.
So add the checking to make sure access the data of vport rep which is
still loaded. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/rxe: Remove the direct link to net_device
The similar patch in siw is in the link:
https://git.kernel.org/rdma/rdma/c/16b87037b48889
This problem also occurred in RXE. The following analyze this problem.
In the following Call Traces:
"
BUG: KASAN: slab-use-after-free in dev_get_flags+0x188/0x1d0 net/core/dev.c:8782
Read of size 4 at addr ffff8880554640b0 by task kworker/1:4/5295
CPU: 1 UID: 0 PID: 5295 Comm: kworker/1:4 Not tainted
6.12.0-rc3-syzkaller-00399-g9197b73fd7bb #0
Hardware name: Google Compute Engine/Google Compute Engine,
BIOS Google 09/13/2024
Workqueue: infiniband ib_cache_event_task
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:94 [inline]
dump_stack_lvl+0x241/0x360 lib/dump_stack.c:120
print_address_description mm/kasan/report.c:377 [inline]
print_report+0x169/0x550 mm/kasan/report.c:488
kasan_report+0x143/0x180 mm/kasan/report.c:601
dev_get_flags+0x188/0x1d0 net/core/dev.c:8782
rxe_query_port+0x12d/0x260 drivers/infiniband/sw/rxe/rxe_verbs.c:60
__ib_query_port drivers/infiniband/core/device.c:2111 [inline]
ib_query_port+0x168/0x7d0 drivers/infiniband/core/device.c:2143
ib_cache_update+0x1a9/0xb80 drivers/infiniband/core/cache.c:1494
ib_cache_event_task+0xf3/0x1e0 drivers/infiniband/core/cache.c:1568
process_one_work kernel/workqueue.c:3229 [inline]
process_scheduled_works+0xa65/0x1850 kernel/workqueue.c:3310
worker_thread+0x870/0xd30 kernel/workqueue.c:3391
kthread+0x2f2/0x390 kernel/kthread.c:389
ret_from_fork+0x4d/0x80 arch/x86/kernel/process.c:147
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244
</TASK>
"
1). In the link [1],
"
infiniband syz2: set down
"
This means that on 839.350575, the event ib_cache_event_task was sent andi
queued in ib_wq.
2). In the link [1],
"
team0 (unregistering): Port device team_slave_0 removed
"
It indicates that before 843.251853, the net device should be freed.
3). In the link [1],
"
BUG: KASAN: slab-use-after-free in dev_get_flags+0x188/0x1d0
"
This means that on 850.559070, this slab-use-after-free problem occurred.
In all, on 839.350575, the event ib_cache_event_task was sent and queued
in ib_wq,
before 843.251853, the net device veth was freed.
on 850.559070, this event was executed, and the mentioned freed net device
was called. Thus, the above call trace occurred.
[1] https://syzkaller.appspot.com/x/log.txt?x=12e7025f980000 |
| In the Linux kernel, the following vulnerability has been resolved:
kunit: string-stream: Fix a UAF bug in kunit_init_suite()
In kunit_debugfs_create_suite(), if alloc_string_stream() fails in the
kunit_suite_for_each_test_case() loop, the "suite->log = stream"
has assigned before, and the error path only free the suite->log's stream
memory but not set it to NULL, so the later string_stream_clear() of
suite->log in kunit_init_suite() will cause below UAF bug.
Set stream pointer to NULL after free to fix it.
Unable to handle kernel paging request at virtual address 006440150000030d
Mem abort info:
ESR = 0x0000000096000004
EC = 0x25: DABT (current EL), IL = 32 bits
SET = 0, FnV = 0
EA = 0, S1PTW = 0
FSC = 0x04: level 0 translation fault
Data abort info:
ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000
CM = 0, WnR = 0, TnD = 0, TagAccess = 0
GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0
[006440150000030d] address between user and kernel address ranges
Internal error: Oops: 0000000096000004 [#1] PREEMPT SMP
Dumping ftrace buffer:
(ftrace buffer empty)
Modules linked in: iio_test_gts industrialio_gts_helper cfg80211 rfkill ipv6 [last unloaded: iio_test_gts]
CPU: 5 UID: 0 PID: 6253 Comm: modprobe Tainted: G B W N 6.12.0-rc4+ #458
Tainted: [B]=BAD_PAGE, [W]=WARN, [N]=TEST
Hardware name: linux,dummy-virt (DT)
pstate: 40000005 (nZcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : string_stream_clear+0x54/0x1ac
lr : string_stream_clear+0x1a8/0x1ac
sp : ffffffc080b47410
x29: ffffffc080b47410 x28: 006440550000030d x27: ffffff80c96b5e98
x26: ffffff80c96b5e80 x25: ffffffe461b3f6c0 x24: 0000000000000003
x23: ffffff80c96b5e88 x22: 1ffffff019cdf4fc x21: dfffffc000000000
x20: ffffff80ce6fa7e0 x19: 032202a80000186d x18: 0000000000001840
x17: 0000000000000000 x16: 0000000000000000 x15: ffffffe45c355cb4
x14: ffffffe45c35589c x13: ffffffe45c03da78 x12: ffffffb810168e75
x11: 1ffffff810168e74 x10: ffffffb810168e74 x9 : dfffffc000000000
x8 : 0000000000000004 x7 : 0000000000000003 x6 : 0000000000000001
x5 : ffffffc080b473a0 x4 : 0000000000000000 x3 : 0000000000000000
x2 : 0000000000000001 x1 : ffffffe462fbf620 x0 : dfffffc000000000
Call trace:
string_stream_clear+0x54/0x1ac
__kunit_test_suites_init+0x108/0x1d8
kunit_exec_run_tests+0xb8/0x100
kunit_module_notify+0x400/0x55c
notifier_call_chain+0xfc/0x3b4
blocking_notifier_call_chain+0x68/0x9c
do_init_module+0x24c/0x5c8
load_module+0x4acc/0x4e90
init_module_from_file+0xd4/0x128
idempotent_init_module+0x2d4/0x57c
__arm64_sys_finit_module+0xac/0x100
invoke_syscall+0x6c/0x258
el0_svc_common.constprop.0+0x160/0x22c
do_el0_svc+0x44/0x5c
el0_svc+0x48/0xb8
el0t_64_sync_handler+0x13c/0x158
el0t_64_sync+0x190/0x194
Code: f9400753 d2dff800 f2fbffe0 d343fe7c (38e06b80)
---[ end trace 0000000000000000 ]---
Kernel panic - not syncing: Oops: Fatal exception |
| In the Linux kernel, the following vulnerability has been resolved:
powerpc/pseries/vas: Add close() callback in vas_vm_ops struct
The mapping VMA address is saved in VAS window struct when the
paste address is mapped. This VMA address is used during migration
to unmap the paste address if the window is active. The paste
address mapping will be removed when the window is closed or with
the munmap(). But the VMA address in the VAS window is not updated
with munmap() which is causing invalid access during migration.
The KASAN report shows:
[16386.254991] BUG: KASAN: slab-use-after-free in reconfig_close_windows+0x1a0/0x4e8
[16386.255043] Read of size 8 at addr c00000014a819670 by task drmgr/696928
[16386.255096] CPU: 29 UID: 0 PID: 696928 Comm: drmgr Kdump: loaded Tainted: G B 6.11.0-rc5-nxgzip #2
[16386.255128] Tainted: [B]=BAD_PAGE
[16386.255148] Hardware name: IBM,9080-HEX Power11 (architected) 0x820200 0xf000007 of:IBM,FW1110.00 (NH1110_016) hv:phyp pSeries
[16386.255181] Call Trace:
[16386.255202] [c00000016b297660] [c0000000018ad0ac] dump_stack_lvl+0x84/0xe8 (unreliable)
[16386.255246] [c00000016b297690] [c0000000006e8a90] print_report+0x19c/0x764
[16386.255285] [c00000016b297760] [c0000000006e9490] kasan_report+0x128/0x1f8
[16386.255309] [c00000016b297880] [c0000000006eb5c8] __asan_load8+0xac/0xe0
[16386.255326] [c00000016b2978a0] [c00000000013f898] reconfig_close_windows+0x1a0/0x4e8
[16386.255343] [c00000016b297990] [c000000000140e58] vas_migration_handler+0x3a4/0x3fc
[16386.255368] [c00000016b297a90] [c000000000128848] pseries_migrate_partition+0x4c/0x4c4
...
[16386.256136] Allocated by task 696554 on cpu 31 at 16377.277618s:
[16386.256149] kasan_save_stack+0x34/0x68
[16386.256163] kasan_save_track+0x34/0x80
[16386.256175] kasan_save_alloc_info+0x58/0x74
[16386.256196] __kasan_slab_alloc+0xb8/0xdc
[16386.256209] kmem_cache_alloc_noprof+0x200/0x3d0
[16386.256225] vm_area_alloc+0x44/0x150
[16386.256245] mmap_region+0x214/0x10c4
[16386.256265] do_mmap+0x5fc/0x750
[16386.256277] vm_mmap_pgoff+0x14c/0x24c
[16386.256292] ksys_mmap_pgoff+0x20c/0x348
[16386.256303] sys_mmap+0xd0/0x160
...
[16386.256350] Freed by task 0 on cpu 31 at 16386.204848s:
[16386.256363] kasan_save_stack+0x34/0x68
[16386.256374] kasan_save_track+0x34/0x80
[16386.256384] kasan_save_free_info+0x64/0x10c
[16386.256396] __kasan_slab_free+0x120/0x204
[16386.256415] kmem_cache_free+0x128/0x450
[16386.256428] vm_area_free_rcu_cb+0xa8/0xd8
[16386.256441] rcu_do_batch+0x2c8/0xcf0
[16386.256458] rcu_core+0x378/0x3c4
[16386.256473] handle_softirqs+0x20c/0x60c
[16386.256495] do_softirq_own_stack+0x6c/0x88
[16386.256509] do_softirq_own_stack+0x58/0x88
[16386.256521] __irq_exit_rcu+0x1a4/0x20c
[16386.256533] irq_exit+0x20/0x38
[16386.256544] interrupt_async_exit_prepare.constprop.0+0x18/0x2c
...
[16386.256717] Last potentially related work creation:
[16386.256729] kasan_save_stack+0x34/0x68
[16386.256741] __kasan_record_aux_stack+0xcc/0x12c
[16386.256753] __call_rcu_common.constprop.0+0x94/0xd04
[16386.256766] vm_area_free+0x28/0x3c
[16386.256778] remove_vma+0xf4/0x114
[16386.256797] do_vmi_align_munmap.constprop.0+0x684/0x870
[16386.256811] __vm_munmap+0xe0/0x1f8
[16386.256821] sys_munmap+0x54/0x6c
[16386.256830] system_call_exception+0x1a0/0x4a0
[16386.256841] system_call_vectored_common+0x15c/0x2ec
[16386.256868] The buggy address belongs to the object at c00000014a819670
which belongs to the cache vm_area_struct of size 168
[16386.256887] The buggy address is located 0 bytes inside of
freed 168-byte region [c00000014a819670, c00000014a819718)
[16386.256915] The buggy address belongs to the physical page:
[16386.256928] page: refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x14a81
[16386.256950] memcg:c0000000ba430001
[16386.256961] anon flags: 0x43ffff800000000(node=4|zone=0|lastcpupid=0x7ffff)
[16386.256975] page_type: 0xfdffffff(slab)
[16386
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
ublk: detach gendisk from ublk device if add_disk() fails
Inside ublk_abort_requests(), gendisk is grabbed for aborting all
inflight requests. And ublk_abort_requests() is called when exiting
the uring context or handling timeout.
If add_disk() fails, the gendisk may have been freed when calling
ublk_abort_requests(), so use-after-free can be caused when getting
disk's reference in ublk_abort_requests().
Fixes the bug by detaching gendisk from ublk device if add_disk() fails. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: fix use-after-free when COWing tree bock and tracing is enabled
When a COWing a tree block, at btrfs_cow_block(), and we have the
tracepoint trace_btrfs_cow_block() enabled and preemption is also enabled
(CONFIG_PREEMPT=y), we can trigger a use-after-free in the COWed extent
buffer while inside the tracepoint code. This is because in some paths
that call btrfs_cow_block(), such as btrfs_search_slot(), we are holding
the last reference on the extent buffer @buf so btrfs_force_cow_block()
drops the last reference on the @buf extent buffer when it calls
free_extent_buffer_stale(buf), which schedules the release of the extent
buffer with RCU. This means that if we are on a kernel with preemption,
the current task may be preempted before calling trace_btrfs_cow_block()
and the extent buffer already released by the time trace_btrfs_cow_block()
is called, resulting in a use-after-free.
Fix this by moving the trace_btrfs_cow_block() from btrfs_cow_block() to
btrfs_force_cow_block() before the COWed extent buffer is freed.
This also has a side effect of invoking the tracepoint in the tree defrag
code, at defrag.c:btrfs_realloc_node(), since btrfs_force_cow_block() is
called there, but this is fine and it was actually missing there. |
| In the Linux kernel, the following vulnerability has been resolved:
brd: defer automatic disk creation until module initialization succeeds
My colleague Wupeng found the following problems during fault injection:
BUG: unable to handle page fault for address: fffffbfff809d073
PGD 6e648067 P4D 123ec8067 PUD 123ec4067 PMD 100e38067 PTE 0
Oops: Oops: 0000 [#1] PREEMPT SMP KASAN NOPTI
CPU: 5 UID: 0 PID: 755 Comm: modprobe Not tainted 6.12.0-rc3+ #17
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
1.16.1-2.fc37 04/01/2014
RIP: 0010:__asan_load8+0x4c/0xa0
...
Call Trace:
<TASK>
blkdev_put_whole+0x41/0x70
bdev_release+0x1a3/0x250
blkdev_release+0x11/0x20
__fput+0x1d7/0x4a0
task_work_run+0xfc/0x180
syscall_exit_to_user_mode+0x1de/0x1f0
do_syscall_64+0x6b/0x170
entry_SYSCALL_64_after_hwframe+0x76/0x7e
loop_init() is calling loop_add() after __register_blkdev() succeeds and
is ignoring disk_add() failure from loop_add(), for loop_add() failure
is not fatal and successfully created disks are already visible to
bdev_open().
brd_init() is currently calling brd_alloc() before __register_blkdev()
succeeds and is releasing successfully created disks when brd_init()
returns an error. This can cause UAF for the latter two case:
case 1:
T1:
modprobe brd
brd_init
brd_alloc(0) // success
add_disk
disk_scan_partitions
bdev_file_open_by_dev // alloc file
fput // won't free until back to userspace
brd_alloc(1) // failed since mem alloc error inject
// error path for modprobe will release code segment
// back to userspace
__fput
blkdev_release
bdev_release
blkdev_put_whole
bdev->bd_disk->fops->release // fops is freed now, UAF!
case 2:
T1: T2:
modprobe brd
brd_init
brd_alloc(0) // success
open(/dev/ram0)
brd_alloc(1) // fail
// error path for modprobe
close(/dev/ram0)
...
/* UAF! */
bdev->bd_disk->fops->release
Fix this problem by following what loop_init() does. Besides,
reintroduce brd_devices_mutex to help serialize modifications to
brd_list. |
| In the Linux kernel, the following vulnerability has been resolved:
powerpc/mm/fault: Fix kfence page fault reporting
copy_from_kernel_nofault() can be called when doing read of /proc/kcore.
/proc/kcore can have some unmapped kfence objects which when read via
copy_from_kernel_nofault() can cause page faults. Since *_nofault()
functions define their own fixup table for handling fault, use that
instead of asking kfence to handle such faults.
Hence we search the exception tables for the nip which generated the
fault. If there is an entry then we let the fixup table handler handle the
page fault by returning an error from within ___do_page_fault().
This can be easily triggered if someone tries to do dd from /proc/kcore.
eg. dd if=/proc/kcore of=/dev/null bs=1M
Some example false negatives:
===============================
BUG: KFENCE: invalid read in copy_from_kernel_nofault+0x9c/0x1a0
Invalid read at 0xc0000000fdff0000:
copy_from_kernel_nofault+0x9c/0x1a0
0xc00000000665f950
read_kcore_iter+0x57c/0xa04
proc_reg_read_iter+0xe4/0x16c
vfs_read+0x320/0x3ec
ksys_read+0x90/0x154
system_call_exception+0x120/0x310
system_call_vectored_common+0x15c/0x2ec
BUG: KFENCE: use-after-free read in copy_from_kernel_nofault+0x9c/0x1a0
Use-after-free read at 0xc0000000fe050000 (in kfence-#2):
copy_from_kernel_nofault+0x9c/0x1a0
0xc00000000665f950
read_kcore_iter+0x57c/0xa04
proc_reg_read_iter+0xe4/0x16c
vfs_read+0x320/0x3ec
ksys_read+0x90/0x154
system_call_exception+0x120/0x310
system_call_vectored_common+0x15c/0x2ec |
