| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A vulnerability has been found in TP-Link TL-WR841N V11. The vulnerability exists in the /userRpm/Wan6to4TunnelCfgRpm.htm file due to missing input parameter validation, which may lead to the buffer overflow to cause a crash of the web service and result in a denial-of-service (DoS) condition. The attack may be launched remotely. This vulnerability only affects products that are no longer supported by the maintainer. |
| A vulnerability in the TLS cryptography functionality of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause the device to reload unexpectedly, resulting in a denial of service (DoS) condition.
This vulnerability is due to improper data validation during the TLS 1.3 handshake. An attacker could exploit this vulnerability by sending a crafted TLS 1.3 packet to an affected system through a TLS 1.3-enabled listening socket. A successful exploit could allow the attacker to cause the device to reload, resulting in a DoS condition.
Note: This vulnerability can also impact the integrity of a device by causing VPN HostScan communication failures or file transfer failures when Cisco ASA Software is upgraded using Cisco Adaptive Security Device Manager (ASDM). |
| A vulnerability has been found in TP-Link TL-WR841N V11. The vulnerability exists in the /userRpm/WlanNetworkRpm.htm file due to missing input parameter validation, which may lead to the buffer overflow to cause a crash of the web service and result in a denial-of-service (DoS) condition. The attack may be launched remotely. This vulnerability only affects products that are no longer supported by the maintainer. |
| A vulnerability in the IPv4 access control list (ACL) feature and quality of service (QoS) policy feature of Cisco IOS XR Software for Cisco ASR 9000 Series Aggregation Services Routers, ASR 9902 Compact High-Performance Routers, and ASR 9903 Compact High-Performance Routers could allow an unauthenticated, remote attacker to cause a line card to reset, resulting in a denial of service (DoS) condition.
This vulnerability is due to the incorrect handling of malformed IPv4 packets that are received on line cards where the interface has either an IPv4 ACL or QoS policy applied. An attacker could exploit this vulnerability by sending crafted IPv4 packets through an affected device. A successful exploit could allow the attacker to cause network processor errors, resulting in a reset or shutdown of the network process. Traffic over that line card would be lost while the line card reloads.
Note: This vulnerability has predominantly been observed in Layer 2 VPN (L2VPN) environments where an IPv4 ACL or QoS policy has been applied to the bridge virtual interface. Layer 3 configurations where the interface has either an IPv4 ACL or QoS policy applied are also affected, though the vulnerability has not been observed. |
| iTop is an web based IT Service Management tool. Prior to versions 2.7.12, 3.1.3, and 3.2.1, anyone with an account having portal access can have read access to objects they're not allowed to see by querying an unprotected route. Versions 2.7.12, 3.1.3, and 3.2.1 contain a fix for the issue. |
| iTop is an web based IT Service Management tool. Prior to versions 3.1.3 and 3.2.1, by filling malicious code in a CSV content, a cross-site scripting attack can be performed when importing this content. The issue is fixed in versions 3.1.3 and 3.2.1. As a workaround, check CSV content before importing it. |
| iTop is an web based IT Service Management tool. Prior to versions 2.7.12, 3.1.3, and 3.2.1, server code execution is possible through the frontend of iTop's portal. This is fixed in versions 2.7.12, 3.1.3 and 3.2.1. |
| iTop is an web based IT Service Management tool. Versions prior to 3.2.1 are vulnerable to regular expression denial of service (ReDoS) that may, under some circumstances, affect iTop server. Version 3.2.1 doesn't use the affected variable in the regular expression. As a workaround, if iTop app_root_url is defined in the configuration file, then there is no possible way to exploit this ReDoS. |
| iTop is an web based IT Service Management tool. In version 3.2.0, an attacker may send a URL to the server to trigger a PHP error. The next user trying to load this dashboard would encounter a crashed start page. Version 3.2.1 fixes the issue by checking the provided layout_class before saving the dashboard. |
| In Splunk Enterprise versions below 9.4.3, 9.3.5, 9.2.7, and 9.1.10, and Splunk Cloud Platform versions below 9.3.2411.103, 9.3.2408.113, and 9.2.2406.119, the software potentially exposes the search head cluster [splunk.secret](https://help.splunk.com/en/splunk-enterprise/administer/manage-users-and-security/9.4/install-splunk-enterprise-securely/deploy-secure-passwords-across-multiple-servers) key. This exposure could happen if you have a Search Head cluster and you configure the Splunk Enterprise `SHCConfig` log channel at the DEBUG logging level in the clustered deployment. <br><br>The vulnerability would require either local access to the log files or administrative access to internal indexes, which by default only the admin role receives. Review roles and capabilities on your instance and restrict internal index access to administrator-level roles. <br><br>See [Define roles on the Splunk platform with capabilities](https://docs.splunk.com/Documentation/Splunk/latest/Security/Rolesandcapabilities), [Deploy a search head cluster](https://help.splunk.com/en/splunk-enterprise/administer/distributed-search/9.4/deploy-search-head-clustering/deploy-a-search-head-cluster), [Deploy secure passwords across multiple servers](https://help.splunk.com/en/splunk-enterprise/administer/manage-users-and-security/9.4/install-splunk-enterprise-securely/deploy-secure-passwords-across-multiple-servers) and [Set a security key for the search head cluster](https://help.splunk.com/splunk-enterprise/administer/distributed-search/9.4/configure-search-head-clustering/set-a-security-key-for-the-search-head-cluster#id_2c54937a_736c_47b5_9485_67e9e390acfa__Set_a_security_key_for_the_search_head_cluster) for more information. |
| A vulnerability in the CLI of Cisco IOS XE Software could allow an authenticated, local attacker with privilege level 15 to elevate privileges to root on the underlying operating system of an affected device.
This vulnerability is due to insufficient input validation when processing specific configuration commands. An attacker could exploit this vulnerability by including crafted input in specific configuration commands. A successful exploit could allow the attacker to elevate privileges to root on the underlying operating system of an affected device. The security impact rating (SIR) of this advisory has been raised to High because an attacker could gain access to the underlying operating system of the affected device and perform potentially undetected actions.
Note: The attacker must have privileges to enter configuration mode on the affected device. This is usually referred to as privilege level 15. |
| A vulnerability in the web-based management interface of Cisco Secure Network Analytics could allow an authenticated, remote attacker with valid administrative credentials to execute arbitrary commands as root on the underlying operating system.
This vulnerability is due to insufficient integrity checks within device backup files. An attacker with valid administrative credentials could exploit this vulnerability by crafting a malicious backup file and restoring it to an affected device. A successful exploit could allow the attacker to obtain shell access on the underlying operating system with the privileges of root. |
| A vulnerability in the implementation of the Resource Public Key Infrastructure (RPKI) feature of Cisco IOS XR Software could allow an unauthenticated, remote attacker to cause the Border Gateway Protocol (BGP) process to crash, resulting in a denial of service (DoS) condition.
This vulnerability is due to the incorrect handling of a specific RPKI to Router (RTR) Protocol packet header. An attacker could exploit this vulnerability by compromising the RPKI validator server and sending a specifically crafted RTR packet to an affected device. Alternatively, the attacker could use man-in-the-middle techniques to impersonate the RPKI validator server and send a specifically crafted RTR response packet over the established RTR TCP connection to the affected device. A successful exploit could allow the attacker to cause a DoS condition because the BGP process could constantly restart and BGP routing could become unstable.Cisco has released software updates that address this vulnerability. There are no workarounds that address this vulnerability.This advisory is part of the September 2021 release of the Cisco IOS XR Software Security Advisory Bundled Publication. For a complete list of the advisories and links to them, see . |
| A vulnerability in the Broadband Network Gateway PPP over Ethernet (PPPoE) feature of Cisco IOS XR Software could allow an unauthenticated, adjacent attacker to cause the PPPoE process to continually crash.
This vulnerability exists because the PPPoE feature does not properly handle an error condition within a specific crafted packet sequence. An attacker could exploit this vulnerability by sending a sequence of specific PPPoE packets from controlled customer premises equipment (CPE). A successful exploit could allow the attacker to cause the PPPoE process to continually restart, resulting in a denial of service condition (DoS).Cisco has released software updates that address this vulnerability. There are no workarounds that address this vulnerability.This advisory is part of the September 2022 release of the Cisco IOS XR Software Security Advisory Bundled Publication. For a complete list of the advisories and links to them, see . |
| A stored cross-site scripting (XSS) vulnerability exists in the gaizhenbiao/chuanhuchatgpt repository, affecting version git 20b2e02. The vulnerability arises from improper sanitization of HTML tags in chat history uploads. Specifically, the sanitization logic fails to handle HTML tags within code blocks correctly, allowing an attacker to inject malicious scripts. This can lead to the execution of arbitrary JavaScript code in the context of the user's browser, potentially leading to identity theft or other malicious actions. |
| A flaw was found in the XFIXES extension. The XFixesSetClientDisconnectMode handler does not validate the request length, allowing a client to read unintended memory from previous requests. |
| A vulnerability in the implementation of the Simple Network Management Protocol (SNMP) IPv4 access control list (ACL) feature of Cisco IOS Software and Cisco IOS XE Software could allow an unauthenticated, remote attacker to perform SNMP polling of an affected device, even if it is configured to deny SNMP traffic.
This vulnerability exists because Cisco IOS Software and Cisco IOS XE Software do not support extended IPv4 ACLs for SNMP, but they do allow administrators to configure extended named IPv4 ACLs that are attached to the SNMP server configuration without a warning message. This can result in no ACL being applied to the SNMP listening process. An attacker could exploit this vulnerability by performing SNMP polling of an affected device. A successful exploit could allow the attacker to perform SNMP operations that should be denied. The attacker has no control of the SNMP ACL configuration and would still need a valid SNMP version 2c (SNMPv2c) community string or SNMP version 3 (SNMPv3) user credentials.
SNMP with IPv6 ACL configurations is not affected.
For more information, see the section of this advisory. |
| A flaw was found in grub2. During the network boot process, when trying to search for the configuration file, grub copies data from a user controlled environment variable into an internal buffer using the grub_strcpy() function. During this step, it fails to consider the environment variable length when allocating the internal buffer, resulting in an out-of-bounds write. If correctly exploited, this issue may result in remote code execution through the same network segment grub is searching for the boot information, which can be used to by-pass secure boot protections. |
| An incorrect authorization vulnerability exists in gaizhenbiao/chuanhuchatgpt version git c91dbfc. The vulnerability allows any user to restart the server at will, leading to a complete loss of availability. The issue arises because the function responsible for restarting the server is not properly guarded by an admin check. |
| A command injection flaw was found in the text editor Emacs. It could allow a remote, unauthenticated attacker to execute arbitrary shell commands on a vulnerable system. Exploitation is possible by tricking users into visiting a specially crafted website or an HTTP URL with a redirect. |
