| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Cancel the running bpf_timer through kworker for PREEMPT_RT
During the update procedure, when overwrite element in a pre-allocated
htab, the freeing of old_element is protected by the bucket lock. The
reason why the bucket lock is necessary is that the old_element has
already been stashed in htab->extra_elems after alloc_htab_elem()
returns. If freeing the old_element after the bucket lock is unlocked,
the stashed element may be reused by concurrent update procedure and the
freeing of old_element will run concurrently with the reuse of the
old_element. However, the invocation of check_and_free_fields() may
acquire a spin-lock which violates the lockdep rule because its caller
has already held a raw-spin-lock (bucket lock). The following warning
will be reported when such race happens:
BUG: scheduling while atomic: test_progs/676/0x00000003
3 locks held by test_progs/676:
#0: ffffffff864b0240 (rcu_read_lock_trace){....}-{0:0}, at: bpf_prog_test_run_syscall+0x2c0/0x830
#1: ffff88810e961188 (&htab->lockdep_key){....}-{2:2}, at: htab_map_update_elem+0x306/0x1500
#2: ffff8881f4eac1b8 (&base->softirq_expiry_lock){....}-{2:2}, at: hrtimer_cancel_wait_running+0xe9/0x1b0
Modules linked in: bpf_testmod(O)
Preemption disabled at:
[<ffffffff817837a3>] htab_map_update_elem+0x293/0x1500
CPU: 0 UID: 0 PID: 676 Comm: test_progs Tainted: G ... 6.12.0+ #11
Tainted: [W]=WARN, [O]=OOT_MODULE
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996)...
Call Trace:
<TASK>
dump_stack_lvl+0x57/0x70
dump_stack+0x10/0x20
__schedule_bug+0x120/0x170
__schedule+0x300c/0x4800
schedule_rtlock+0x37/0x60
rtlock_slowlock_locked+0x6d9/0x54c0
rt_spin_lock+0x168/0x230
hrtimer_cancel_wait_running+0xe9/0x1b0
hrtimer_cancel+0x24/0x30
bpf_timer_delete_work+0x1d/0x40
bpf_timer_cancel_and_free+0x5e/0x80
bpf_obj_free_fields+0x262/0x4a0
check_and_free_fields+0x1d0/0x280
htab_map_update_elem+0x7fc/0x1500
bpf_prog_9f90bc20768e0cb9_overwrite_cb+0x3f/0x43
bpf_prog_ea601c4649694dbd_overwrite_timer+0x5d/0x7e
bpf_prog_test_run_syscall+0x322/0x830
__sys_bpf+0x135d/0x3ca0
__x64_sys_bpf+0x75/0xb0
x64_sys_call+0x1b5/0xa10
do_syscall_64+0x3b/0xc0
entry_SYSCALL_64_after_hwframe+0x4b/0x53
...
</TASK>
It seems feasible to break the reuse and refill of per-cpu extra_elems
into two independent parts: reuse the per-cpu extra_elems with bucket
lock being held and refill the old_element as per-cpu extra_elems after
the bucket lock is unlocked. However, it will make the concurrent
overwrite procedures on the same CPU return unexpected -E2BIG error when
the map is full.
Therefore, the patch fixes the lock problem by breaking the cancelling
of bpf_timer into two steps for PREEMPT_RT:
1) use hrtimer_try_to_cancel() and check its return value
2) if the timer is running, use hrtimer_cancel() through a kworker to
cancel it again
Considering that the current implementation of hrtimer_cancel() will try
to acquire a being held softirq_expiry_lock when the current timer is
running, these steps above are reasonable. However, it also has
downside. When the timer is running, the cancelling of the timer is
delayed when releasing the last map uref. The delay is also fixable
(e.g., break the cancelling of bpf timer into two parts: one part in
locked scope, another one in unlocked scope), it can be revised later if
necessary.
It is a bit hard to decide the right fix tag. One reason is that the
problem depends on PREEMPT_RT which is enabled in v6.12. Considering the
softirq_expiry_lock lock exists since v5.4 and bpf_timer is introduced
in v5.15, the bpf_timer commit is used in the fixes tag and an extra
depends-on tag is added to state the dependency on PREEMPT_RT.
Depends-on: v6.12+ with PREEMPT_RT enabled |
| In the Linux kernel, the following vulnerability has been resolved:
NFSD: fix hang in nfsd4_shutdown_callback
If nfs4_client is in courtesy state then there is no point to send
the callback. This causes nfsd4_shutdown_callback to hang since
cl_cb_inflight is not 0. This hang lasts about 15 minutes until TCP
notifies NFSD that the connection was dropped.
This patch modifies nfsd4_run_cb_work to skip the RPC call if
nfs4_client is in courtesy state. |
| In the Linux kernel, the following vulnerability has been resolved:
mptcp: consolidate suboption status
MPTCP maintains the received sub-options status is the bitmask carrying
the received suboptions and in several bitfields carrying per suboption
additional info.
Zeroing the bitmask before parsing is not enough to ensure a consistent
status, and the MPTCP code has to additionally clear some bitfiled
depending on the actually parsed suboption.
The above schema is fragile, and syzbot managed to trigger a path where
a relevant bitfield is not cleared/initialized:
BUG: KMSAN: uninit-value in __mptcp_expand_seq net/mptcp/options.c:1030 [inline]
BUG: KMSAN: uninit-value in mptcp_expand_seq net/mptcp/protocol.h:864 [inline]
BUG: KMSAN: uninit-value in ack_update_msk net/mptcp/options.c:1060 [inline]
BUG: KMSAN: uninit-value in mptcp_incoming_options+0x2036/0x3d30 net/mptcp/options.c:1209
__mptcp_expand_seq net/mptcp/options.c:1030 [inline]
mptcp_expand_seq net/mptcp/protocol.h:864 [inline]
ack_update_msk net/mptcp/options.c:1060 [inline]
mptcp_incoming_options+0x2036/0x3d30 net/mptcp/options.c:1209
tcp_data_queue+0xb4/0x7be0 net/ipv4/tcp_input.c:5233
tcp_rcv_established+0x1061/0x2510 net/ipv4/tcp_input.c:6264
tcp_v4_do_rcv+0x7f3/0x11a0 net/ipv4/tcp_ipv4.c:1916
tcp_v4_rcv+0x51df/0x5750 net/ipv4/tcp_ipv4.c:2351
ip_protocol_deliver_rcu+0x2a3/0x13d0 net/ipv4/ip_input.c:205
ip_local_deliver_finish+0x336/0x500 net/ipv4/ip_input.c:233
NF_HOOK include/linux/netfilter.h:314 [inline]
ip_local_deliver+0x21f/0x490 net/ipv4/ip_input.c:254
dst_input include/net/dst.h:460 [inline]
ip_rcv_finish+0x4a2/0x520 net/ipv4/ip_input.c:447
NF_HOOK include/linux/netfilter.h:314 [inline]
ip_rcv+0xcd/0x380 net/ipv4/ip_input.c:567
__netif_receive_skb_one_core net/core/dev.c:5704 [inline]
__netif_receive_skb+0x319/0xa00 net/core/dev.c:5817
process_backlog+0x4ad/0xa50 net/core/dev.c:6149
__napi_poll+0xe7/0x980 net/core/dev.c:6902
napi_poll net/core/dev.c:6971 [inline]
net_rx_action+0xa5a/0x19b0 net/core/dev.c:7093
handle_softirqs+0x1a0/0x7c0 kernel/softirq.c:561
__do_softirq+0x14/0x1a kernel/softirq.c:595
do_softirq+0x9a/0x100 kernel/softirq.c:462
__local_bh_enable_ip+0x9f/0xb0 kernel/softirq.c:389
local_bh_enable include/linux/bottom_half.h:33 [inline]
rcu_read_unlock_bh include/linux/rcupdate.h:919 [inline]
__dev_queue_xmit+0x2758/0x57d0 net/core/dev.c:4493
dev_queue_xmit include/linux/netdevice.h:3168 [inline]
neigh_hh_output include/net/neighbour.h:523 [inline]
neigh_output include/net/neighbour.h:537 [inline]
ip_finish_output2+0x187c/0x1b70 net/ipv4/ip_output.c:236
__ip_finish_output+0x287/0x810
ip_finish_output+0x4b/0x600 net/ipv4/ip_output.c:324
NF_HOOK_COND include/linux/netfilter.h:303 [inline]
ip_output+0x15f/0x3f0 net/ipv4/ip_output.c:434
dst_output include/net/dst.h:450 [inline]
ip_local_out net/ipv4/ip_output.c:130 [inline]
__ip_queue_xmit+0x1f2a/0x20d0 net/ipv4/ip_output.c:536
ip_queue_xmit+0x60/0x80 net/ipv4/ip_output.c:550
__tcp_transmit_skb+0x3cea/0x4900 net/ipv4/tcp_output.c:1468
tcp_transmit_skb net/ipv4/tcp_output.c:1486 [inline]
tcp_write_xmit+0x3b90/0x9070 net/ipv4/tcp_output.c:2829
__tcp_push_pending_frames+0xc4/0x380 net/ipv4/tcp_output.c:3012
tcp_send_fin+0x9f6/0xf50 net/ipv4/tcp_output.c:3618
__tcp_close+0x140c/0x1550 net/ipv4/tcp.c:3130
__mptcp_close_ssk+0x74e/0x16f0 net/mptcp/protocol.c:2496
mptcp_close_ssk+0x26b/0x2c0 net/mptcp/protocol.c:2550
mptcp_pm_nl_rm_addr_or_subflow+0x635/0xd10 net/mptcp/pm_netlink.c:889
mptcp_pm_nl_rm_subflow_received net/mptcp/pm_netlink.c:924 [inline]
mptcp_pm_flush_addrs_and_subflows net/mptcp/pm_netlink.c:1688 [inline]
mptcp_nl_flush_addrs_list net/mptcp/pm_netlink.c:1709 [inline]
mptcp_pm_nl_flush_addrs_doit+0xe10/0x1630 net/mptcp/pm_netlink.c:1750
genl_family_rcv_msg_doit net/netlink/genetlink.c:1115 [inline]
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
usb: gadget: f_fs: Initialize epfile->in early to fix endpoint direction checks
When parsing endpoint descriptors, ffs_data_got_descs() generates the
eps_addrmap which contains the endpoint direction. However, epfile->in
was previously only populated in ffs_func_eps_enable() which executes
upon USB host connection. As a result, early userspace ioctls like
FUNCTIONFS_DMABUF_ATTACH that run before the host connects would see
epfile->in as 0, leading to incorrect DMA directions.
By moving the initialization to ffs_epfiles_create(), epfile->in is
accurate before userspace opens the endpoint files. |
| In the Linux kernel, the following vulnerability has been resolved:
rust_binder: use a u64 stride when cleaning up the offsets array
Allocation's Drop walks the offsets array (binder_size_t = u64 entries),
cleaning up the objects, but it used usize instead of u64 for both the
stride and the per-entry read.
On 64-bit kernels (usize == u64) this is harmless, but on 32-bit kernels
it walks the 8-byte entries in 4-byte steps, iterating an N-entry array
2N times, and reads the always-zero high word as offset 0, cleaning up
the object at offset 0 N extra times. As a result the referenced node or
handle ends up with a lower reference count than it actually has (a
refcount over-decrement), and binder's reference accounting is corrupted;
for example, the owner can be notified of a strong reference release
(BR_RELEASE) even though references still remain.
Change the stride to u64, and read each entry as a u64, narrowing it to
usize with try_into().
On 32-bit ARM, when this over-decrement would drive a count below zero,
the driver's existing refcount guard refuses it and fires:
rust_binder: Failure: refcount underflow! |
| In consul-mcp-server, versions 0.1.0 up to 0.1.3 did not restrict how the Consul backend address was supplied, allowing a connected client to override the server's configured Consul address via a request header. This may allow a malicious client to redirect the server's Consul API traffic to an attacker-controlled endpoint, potentially exfiltrating the Consul token configured on the server. This vulnerability, CVE-2026-16328, is fixed in consul-mcp-server 0.1.4. |
| Heimdall Data Database Proxy generateFileContent CRLF Injection Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of Heimdall Data Database Proxy. Authentication is required to exploit this vulnerability.
The specific flaw exists within the generateFileContent function. The issue results from the lack of proper neutralization of CRLF sequences. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-29251. |
| Use of uninitialized resource in Microsoft Windows App Store allows an authorized attacker to disclose information locally. |
| vBulletin 5.x through 5.7.5 and 6.x through 6.2.1 contains an eval injection vulnerability in the vB5_Template_Runtime::runMaths() method within the template runtime that allows unauthenticated remote attackers to execute arbitrary PHP code by supplying crafted input through the pagenav[pagenumber] parameter. Attackers can exploit the insufficiently restrictive regex filter by using phpfuck-style encoding with permitted characters to inject and execute arbitrary PHP code via the unauthenticated ajax/render template route without any authentication. |
| Netty is an asynchronous, event-driven network application framework. In versions prior to 4.1.136.Final and 4.2.16.Final, Netty's STOMP encoder ( StompSubframeEncoder ) does not escape or validate header values in CONNECT and CONNECTED frames, so raw newline ( \n ) characters in a header value are written directly to the wire, allowing an attacker who controls a header value to inject additional STOMP headers. This happens because the encoder intentionally skips escaping for CONNECT/CONNECTED frames per the STOMP 1.2 specification but never rejects the raw newlines, and since a broker parses each line as a separate header, an attacker controlling a value such as a user-supplied login or passcode can overwrite connection parameters or add authentication/role headers to bypass authentication or escalate privileges (the actual impact is broker-dependent). The issue is fixed in versions 4.1.136.Final and 4.2.16.Final. |
| Vitest is a testing framework powered by Vite. From 3.0.0 until 3.2.5, 4.1.8, and 5.0.0-beta.4, Vitest Browser Mode exposed a cdp() API that forwarded raw Chrome DevTools Protocol methods without being gated by allowWrite or allowExec, allowing a remote client with exposed browser API metadata to use CDP Page.setDownloadBehavior and Runtime.evaluate to overwrite vite.config.ts and execute attacker-controlled Node.js code. This issue is fixed in versions 3.2.5, 4.1.8, and 5.0.0-beta. |
| Netty is an asynchronous, event-driven network application framework. In versions prior to 4.1.136.Final and 4.2.16.Final, Netty's HAProxy encoder ( HAProxyMessageEncoder ) writes AF_UNIX source and destination socket addresses into the HAProxy V1 text protocol without validating them for CRLF characters, so an attacker who controls an AF_UNIX address can inject \r\n sequences and split the single PROXY header into multiple lines. This is possible because the V1 protocol uses CRLF as its line terminator and, unlike IPv4/IPv6 addresses whose format checks implicitly reject CRLF, AF_UNIX addresses are only validated for length (up to 108 bytes), allowing a forged second PROXY header line that spoofs the client source/destination IP to a downstream server or load balancer. The issue is fixed in versions 4.1.136.Final and 4.2.16.Final. |
| A flaw was found in Red Hat Quay's Proxy Cache configuration feature. When an organization administrator configures an upstream registry for proxy caching, Quay makes a network connection to the specified registry hostname without verifying that it points to a legitimate external service. An attacker with organization administrator privileges could supply a crafted hostname to force the Quay server to make requests to internal network services, cloud infrastructure endpoints, or other resources that should not be accessible from the Quay application. |
| Versions of the package lilconfig from 3.1.0 and before 3.1.1 are vulnerable to Arbitrary Code Execution due to the insecure usage of eval in the dynamicImport function. An attacker can exploit this vulnerability by passing a malicious input through the defaultLoaders function. |
| SuperPlane before 0.30.0 contains an SMTP header injection vulnerability that allows unauthenticated attackers to inject arbitrary SMTP headers by including CRLF sequences in the event payload title field delivered via webhook. Attackers can manipulate the unsanitized title field passed to the SMTP DATA command to add Bcc recipients for content exfiltration, forge the From address to bypass SPF and DKIM checks, or inject Content-Type and MIME boundary headers to corrupt message bodies for phishing. |
| datamodel-code-generator generates Python data models from schema definitions. From 0.14.1 until 0.60.2, the --extra-template-data comment field is rendered into Python comments in src/datamodel_code_generator/model/template/TypeAliasAnnotation.jinja2, src/datamodel_code_generator/model/template/TypedDict.jinja2, src/datamodel_code_generator/model/template/dataclass.jinja2, src/datamodel_code_generator/model/template/msgspec.Struct.jinja2, src/datamodel_code_generator/model/template/pydantic/BaseModel.jinja2, and src/datamodel_code_generator/model/template/pydantic_v2/BaseModel.jinja2 without neutralizing carriage returns in Python # comments, allowing an attacker-controlled comment value to inject Python code into generated models that runs when imported. This issue is fixed in version 0.60.2. |
| datamodel-code-generator generates Pydantic v2 models, dataclasses, TypedDict, and msgspec.Struct from OpenAPI, JSON Schema, GraphQL, Avro, Protobuf, and raw JSON, YAML, or CSV. From 0.9.1 until 0.61.0, datamodel-code-generator silently dereferences attacker-controlled JSON Schema $ref HTTP or HTTPS URLs in src/datamodel_code_generator/parser/jsonschema.py through _get_ref_body, and the --allow-remote-refs gate can warn instead of blocking, allowing server-side request forgery through src/datamodel_code_generator/http.py. This issue is fixed in version 0.61.0. |
| The AWS Amplify Studio UI component property expressions in the aws-amplify/amplify-codegen-ui package lack input validation. This could potentially allow an authenticated user who has access to create or modify components to run arbitrary JavaScript code during the component rendering and build process. |
| Tina is a headless content management system. In versions prior to @tinacms/app 2.5.6 and tinacms 3.9.3, cross-origin postMessage handlers and a rich-text URL-sanitization bypass enable stored XSS and session takeover. The library registers window message listeners — the useTina overlay handler, the OAuth authentication popup handler, and the admin↔preview iframe GraphQL reducer — that act on event.data without verifying event.origin or event.source and post messages using non-specific target origins, while insufficient URL sanitization in rich-text content allows malicious URLs to persist and execute. A page the victim visits (or a window in an opener/iframe relationship with a Tina admin) can forge messages to drive the editor, inject preview content, or observe/forge the OAuth popup channel to take over an authenticated editing session. This issue has been fixed in versions @tinacms/app 2.5.6 and tinacms 3.9.3. |
| The Media Cleaner: Clean your WordPress! plugin for WordPress is vulnerable to Server-Side Request Forgery in all versions up to, and including, 7.0.3. This is due to the `get_urls_from_html()` function using `DOMDocument::loadHTMLFile()` to fetch iframe source URLs with an insufficient hostname validation check that relies on a substring match against the site's server name. This makes it possible for authenticated attackers, with Administrator-level access and above, to make web requests to arbitrary locations originating from the web application, which can be used to query and interact with internal services. |
