| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| An Improper Handling of Length Parameter Inconsistency vulnerability in the Packet Forwarding Engine (PFE) of Juniper Networks Junos OS on SRX Series allows an unauthenticated, network-based attacker to cause a Denial-of-Service (DoS).
When a device configured for Secure Vector Routing (SVR) receives a specifically malformed packet the PFE will crash and restart.
This issue affects Junos OS on SRX Series:
* All 21.4 versions,
* 22.2 versions before 22.2R3-S6,
* 22.4 versions before 22.4R3-S6,
* 23.2 versions before 23.2R2-S3,
* 23.4 versions before 23.4R2-S4,
* 24.2 versions before 24.2R2.
This issue does not affect versions before 21.4. |
| ESF-IDF is the Espressif Internet of Things (IOT) Development Framework. The BluFi example bundled in ESP-IDF was vulnerable to memory overflows in two areas: Wi-Fi credential handling and Diffie–Hellman key exchange. This vulnerability is fixed in 5.4.1, 5.3.3, 5.1.6, and 5.0.9. |
| Koa is expressive middleware for Node.js using ES2017 async functions. Prior to versions 0.21.2, 1.7.1, 2.15.4, and 3.0.0-alpha.3, Koa uses an evil regex to parse the `X-Forwarded-Proto` and `X-Forwarded-Host` HTTP headers. This can be exploited to carry out a Denial-of-Service attack. Versions 0.21.2, 1.7.1, 2.15.4, and 3.0.0-alpha.3 fix the issue. |
| n8n is an open source workflow automation platform. From 1.36.0 to before 2.2.0, the Webhook node’s IP whitelist validation performed partial string matching instead of exact IP comparison. As a result, an incoming request could be accepted if the source IP address merely contained the configured whitelist entry as a substring. This issue affected instances where workflow editors relied on IP-based access controls to restrict webhook access. Both IPv4 and IPv6 addresses were impacted. An attacker with a non-whitelisted IP could bypass restrictions if their IP shared a partial prefix with a trusted address, undermining the intended security boundary. This vulnerability is fixed in 2.2.0. |
| An issue was discovered in weijiang1994 university-bbs (aka Blogin) in commit 9e06bab430bfc729f27b4284ba7570db3b11ce84 (2025-01-13). A weak verification code generation mechanism combined with missing rate limiting allows attackers to perform brute-force attacks on verification codes without authentication. Successful exploitation may result in account takeover via password reset or other authentication bypass methods. |
| Format String vulnerability in the Link Layer Discovery Protocol (LLDP) subsystem of Cisco IOS Software, Cisco IOS XE Software, and Cisco IOS XR Software could allow an unauthenticated, adjacent attacker to cause a denial of service (DoS) condition or execute arbitrary code with elevated privileges on an affected device. Cisco Bug IDs: CSCvd73664. |
| Vivotek IP7137 camera with firmware version 0200a by default dos not require to provide any password when logging in as an administrator. While it is possible to set up such a password, a user is not informed about such a need.
The vendor has not replied to the CNA. Possibly all firmware versions are affected. Since the product has met End-Of-Life phase, a fix is not expected to be released. |
| Dependency on Vulnerable Third-Party Component vulnerability in Broadcom DX NetOps Spectrum on Windows, Linux allows DOM-Based XSS.This issue affects DX NetOps Spectrum: 24.3.9 and earlier. |
| A use of externally-controlled format string vulnerability [CWE-134] vulnerability in Fortinet allows a privileged attacker to execute arbitrary code or commands via specially crafted requests. |
| A use of externally-controlled format string vulnerability [CWE-134] vulnerability in Fortinet allows a privileged attacker to execute unauthorized code or commands via specially crafted command arguments. |
| A weak authentication vulnerability in Fortinet FortiPAM 1.5.0, FortiPAM 1.4.0 through 1.4.2, FortiPAM 1.3 all versions, FortiPAM 1.2 all versions, FortiPAM 1.1 all versions, FortiPAM 1.0 all versions, FortiSwitchManager 7.2.0 through 7.2.4 allows attacker to execute unauthorized code or commands via specially crafted http requests |
| django-wiki is a wiki system for Django. Installations of django-wiki prior to version 0.10.1 are vulnerable to maliciously crafted article content that can cause severe use of server CPU through a regular expression loop. Version 0.10.1 fixes this issue. As a workaround, close off access to create and edit articles by anonymous users. |
| Craft is a platform for creating digital experiences. Versions 5.0.0-RC1 through 5.8.20 and 4.0.0-RC1 through 4.16.16 are vulnerable to potential authenticated Remote Code Execution via Twig SSTI. For this to work, users must have administrator access to the Craft Control Panel, and allowAdminChanges must be enabled, which is against Craft CMS' recommendations for any non-dev environment. Alternatively, a non-administrator account with allowAdminChanges disabled can be used, provided access to the System Messages utility is available. It is possible to craft a malicious payload using the Twig `map` filter in text fields that accept Twig input under Settings in the Craft control panel or using the System Messages utility, which could lead to a RCE. Users should update to the patched versions (5.8.21 and 4.16.17) to mitigate the issue. |
| npm package `expr-eval` is vulnerable to Prototype Pollution. An attacker with access to express eval interface can use JavaScript prototype-based inheritance model to achieve arbitrary code execution. The npm expr-eval-fork package resolves this issue. |
| A use of externally-controlled format string vulnerability has been reported to affect several QNAP operating system versions. If a remote attacker gains an administrator account, they can then exploit the vulnerability to obtain secret data or modify memory.
We have already fixed the vulnerability in the following versions:
QTS 5.2.7.3256 build 20250913 and later
QuTS hero h5.2.7.3256 build 20250913 and later
QuTS hero h5.3.1.3250 build 20250912 and later |
| A Server-Side Template Injection (SSTI) vulnerability exists in the Frappe ERPNext through 15.89.0 Print Format rendering mechanism. Specifically, the API frappe.www.printview.get_html_and_style() triggers the rendering of the html field inside a Print Format document using frappe.render_template(template, doc) via the get_rendered_template() call chain. Although ERPNext wraps Jinja2 in a SandboxedEnvironment, it exposes sensitive functions such as frappe.db.sql through get_safe_globals(). An authenticated attacker with permission to create or modify a Print Format can inject arbitrary Jinja expressions into the html field. Once the malicious Print Format is saved, the attacker can call get_html_and_style() with a target document (e.g., Supplier or Sales Invoice) to trigger the render process. This leads to information disclosure from the database, such as database version, schema details, or sensitive values, depending on the injected payload. Exploitation flow: Create a Print Format with SSTI payload in the html field; call the get_html_and_style() API; triggers frappe.render_template(template, doc) inside get_rendered_template(); leaks database information via frappe.db.sql or other exposed globals. |
| An SSTI (Server-Side Template Injection) vulnerability exists in the get_address_display method of Frappe ERPNext through 15.89.0. This function renders address templates using frappe.render_template() with a context derived from the address_dict parameter, which can be either a dictionary or a string referencing an Address document. Although ERPNext uses a custom Jinja2 SandboxedEnvironment, dangerous functions like frappe.db.sql remain accessible via get_safe_globals(). An authenticated attacker with permission to create or modify an Address Template can inject arbitrary Jinja expressions into the template field. By creating an Address document with a matching country, and then calling the get_address_display API with address_dict="address_name", the system will render the malicious template using attacker-controlled data. This leads to server-side code execution or database information disclosure. |
| Netaxis API Orchestrator (APIO) before 0.19.3 allows server side template injection (SSTI). |
| In the Linux kernel, the following vulnerability has been resolved:
virtio-net: fix overflow inside virtnet_rq_alloc
When the frag just got a page, then may lead to regression on VM.
Specially if the sysctl net.core.high_order_alloc_disable value is 1,
then the frag always get a page when do refill.
Which could see reliable crashes or scp failure (scp a file 100M in size
to VM).
The issue is that the virtnet_rq_dma takes up 16 bytes at the beginning
of a new frag. When the frag size is larger than PAGE_SIZE,
everything is fine. However, if the frag is only one page and the
total size of the buffer and virtnet_rq_dma is larger than one page, an
overflow may occur.
The commit f9dac92ba908 ("virtio_ring: enable premapped mode whatever
use_dma_api") introduced this problem. And we reverted some commits to
fix this in last linux version. Now we try to enable it and fix this
bug directly.
Here, when the frag size is not enough, we reduce the buffer len to fix
this problem. |
| In the Linux kernel, the following vulnerability has been resolved:
fs/jfs: Add check for negative db_l2nbperpage
l2nbperpage is log2(number of blks per page), and the minimum legal
value should be 0, not negative.
In the case of l2nbperpage being negative, an error will occur
when subsequently used as shift exponent.
Syzbot reported this bug:
UBSAN: shift-out-of-bounds in fs/jfs/jfs_dmap.c:799:12
shift exponent -16777216 is negative |
