| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Triofox versions prior to 16.7.10368.56560, are vulnerable to an Improper Access Control flaw that allows access to initial setup pages even after setup is complete. |
| A flaw was found in the HFS filesystem. When reading an HFS volume's name at grub_fs_mount(), the HFS filesystem driver performs a strcpy() using the user-provided volume name as input without properly validating the volume name's length. This issue may read to a heap-based out-of-bounds writer, impacting grub's sensitive data integrity and eventually leading to a secure boot protection bypass. |
| A stack overflow flaw was found when reading a BFS file system. A crafted BFS filesystem may lead to an uncontrolled loop, causing grub2 to crash. |
| A flaw was found in Go. When FIPS mode is enabled on a system, container runtimes may incorrectly handle certain file paths due to improper validation in the containers/common Go library. This flaw allows an attacker to exploit symbolic links and trick the system into mounting sensitive host directories inside a container. This issue also allows attackers to access critical host files, bypassing the intended isolation between containers and the host system. |
| A flaw was found in grub2. When reading tar files, grub2 allocates an internal buffer for the file name. However, it fails to properly verify the allocation against possible integer overflows. It's possible to cause the allocation length to overflow with a crafted tar file, leading to a heap out-of-bounds write. This flaw eventually allows an attacker to circumvent secure boot protections. |
| An integer overflow flaw was found in the BFS file system driver in grub2. When reading a file with an indirect extent map, grub2 fails to validate the number of extent entries to be read. A crafted or corrupted BFS filesystem may cause an integer overflow during the file reading, leading to a heap of bounds read. As a consequence, sensitive data may be leaked, or grub2 will crash. |
| A vulnerability was found in CRI-O, where it can be requested to take a checkpoint archive of a container and later be asked to restore it. When it does that restoration, it attempts to restore the mounts from the restore archive instead of the pod request. As a result, the validations run on the pod spec, verifying that the pod has access to the mounts it specifies are not applicable to a restored container. This flaw allows a malicious user to trick CRI-O into restoring a pod that doesn't have access to host mounts. The user needs access to the kubelet or cri-o socket to call the restore endpoint and trigger the restore. |
| A flaw was found in Podman. This issue may allow an attacker to create a specially crafted container that, when configured to share the same IPC with at least one other container, can create a large number of IPC resources in /dev/shm. The malicious container will continue to exhaust resources until it is out-of-memory (OOM) killed. While the malicious container's cgroup will be removed, the IPC resources it created are not. Those resources are tied to the IPC namespace that will not be removed until all containers using it are stopped, and one non-malicious container is holding the namespace open. The malicious container is restarted, either automatically or by attacker control, repeating the process and increasing the amount of memory consumed. With a container configured to restart always, such as `podman run --restart=always`, this can result in a memory-based denial of service of the system. |
| A flaw was found in the kubevirt-csi component of OpenShift Virtualization's Hosted Control Plane (HCP). This issue could allow an authenticated attacker to gain access to the root HCP worker node's volume by creating a custom Persistent Volume that matches the name of a worker node. |
| OpenPLC Runtime v3 contains an input validation flaw in the /upload-program-action endpoint: the epoch_time field supplied during program uploads is not validated and can be crafted to induce corruption of the programs database. After a successful malformed upload the runtime continues to operate until a restart; on restart the runtime can fail to start because of corrupted database entries, resulting in persistent denial of service requiring complete rebase of the product to recover. This vulnerability was remediated by commit 095ee09. |
| The WPForms WordPress plugin before 1.9.1.6 does not sanitise and escape some of its settings, which could allow high privilege users such as Admin to perform Stored Cross-Site Scripting attacks even when the unfiltered_html capability is disallowed (for example in multisite setup). |
| The Advanced Schedule Posts WordPress plugin through 2.1.8 does not sanitise and escape a parameter before outputting it back in the page, leading to a Reflected Cross-Site Scripting which could be used against high privilege users such as admins. |
| The TwitterPosts WordPress plugin through 1.0.2 does not have CSRF check in place when updating its settings, which could allow attackers to make a logged in admin change them via a CSRF attack |
| The Ovatheme Events Manager plugin for WordPress is vulnerable to unauthorized access due to a missing capability check on several functions in the /class-ovaem-ajax.php file in all versions up to, and including, 1.8.6. This makes it possible for unauthenticated attackers to delete ticket files, download tickets, and more. |
| calibre is an e-book manager. In versions 8.13.0 and prior, calibre does not validate filenames when handling binary assets in FB2 files, allowing an attacker to write arbitrary files on the filesystem when viewing or converting a malicious FictionBook file. This can be leveraged to achieve arbitrary code execution. This issue is fixed in version 8.14.0. |
| In the Linux kernel, the following vulnerability has been resolved:
platform/x86: x86-android-tablets: Fix broken touchscreen on Chuwi Hi8 with Windows BIOS
The x86-android-tablets handling for the Chuwi Hi8 is only necessary with
the Android BIOS and it is causing problems with the Windows BIOS version.
Specifically when trying to register the already present touchscreen
x86_acpi_irq_helper_get() calls acpi_unregister_gsi(), this breaks
the working of the touchscreen and also leads to an oops:
[ 14.248946] ------------[ cut here ]------------
[ 14.248954] remove_proc_entry: removing non-empty directory 'irq/75', leaking at least 'MSSL0001:00'
[ 14.248983] WARNING: CPU: 3 PID: 440 at fs/proc/generic.c:718 remove_proc_entry
...
[ 14.249293] unregister_irq_proc+0xe0/0x100
[ 14.249305] free_desc+0x29/0x70
[ 14.249312] irq_free_descs+0x4b/0x80
[ 14.249320] mp_unmap_irq+0x5c/0x60
[ 14.249329] acpi_unregister_gsi_ioapic+0x2a/0x40
[ 14.249338] x86_acpi_irq_helper_get+0x4b/0x190 [x86_android_tablets]
[ 14.249355] x86_android_tablet_init+0x178/0xe34 [x86_android_tablets]
Add an init callback for the Chuwi Hi8, which detects when the Windows BIOS
is in use and exits with -ENODEV in that case, fixing this. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Don't redirect packets with invalid pkt_len
Syzbot found an issue [1]: fq_codel_drop() try to drop a flow whitout any
skbs, that is, the flow->head is null.
The root cause, as the [2] says, is because that bpf_prog_test_run_skb()
run a bpf prog which redirects empty skbs.
So we should determine whether the length of the packet modified by bpf
prog or others like bpf_prog_test is valid before forwarding it directly. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: nintendo: fix rumble worker null pointer deref
We can dereference a null pointer trying to queue work to a destroyed
workqueue.
If the device is disconnected, nintendo_hid_remove is called, in which
the rumble_queue is destroyed. Avoid using that queue to defer rumble
work once the controller state is set to JOYCON_CTLR_STATE_REMOVED.
This eliminates the null pointer dereference. |
| In the Linux kernel, the following vulnerability has been resolved:
skmsg: Fix wrong last sg check in sk_msg_recvmsg()
Fix one kernel NULL pointer dereference as below:
[ 224.462334] Call Trace:
[ 224.462394] __tcp_bpf_recvmsg+0xd3/0x380
[ 224.462441] ? sock_has_perm+0x78/0xa0
[ 224.462463] tcp_bpf_recvmsg+0x12e/0x220
[ 224.462494] inet_recvmsg+0x5b/0xd0
[ 224.462534] __sys_recvfrom+0xc8/0x130
[ 224.462574] ? syscall_trace_enter+0x1df/0x2e0
[ 224.462606] ? __do_page_fault+0x2de/0x500
[ 224.462635] __x64_sys_recvfrom+0x24/0x30
[ 224.462660] do_syscall_64+0x5d/0x1d0
[ 224.462709] entry_SYSCALL_64_after_hwframe+0x65/0xca
In commit 9974d37ea75f ("skmsg: Fix invalid last sg check in
sk_msg_recvmsg()"), we change last sg check to sg_is_last(),
but in sockmap redirection case (without stream_parser/stream_verdict/
skb_verdict), we did not mark the end of the scatterlist. Check the
sk_msg_alloc, sk_msg_page_add, and bpf_msg_push_data functions, they all
do not mark the end of sg. They are expected to use sg.end for end
judgment. So the judgment of '(i != msg_rx->sg.end)' is added back here. |
| In the Linux kernel, the following vulnerability has been resolved:
xsk: Fix corrupted packets for XDP_SHARED_UMEM
Fix an issue in XDP_SHARED_UMEM mode together with aligned mode where
packets are corrupted for the second and any further sockets bound to
the same umem. In other words, this does not affect the first socket
bound to the umem. The culprit for this bug is that the initialization
of the DMA addresses for the pre-populated xsk buffer pool entries was
not performed for any socket but the first one bound to the umem. Only
the linear array of DMA addresses was populated. Fix this by populating
the DMA addresses in the xsk buffer pool for every socket bound to the
same umem. |
