| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| An Improper Check for Unusual or Exceptional Conditions vulnerability in the packet forwarding engine (pfe) of Juniper Networks Junos OS on specific EX and QFX Series devices allow an unauthenticated, adjacent attacker to cause a complete Denial of Service (DoS).
On EX4k, and QFX5k platforms configured as service-provider edge devices, if L2PT is enabled on the UNI and VSTP is enabled on NNI in VXLAN scenarios, receiving VSTP BPDUs on UNI leads to packet buffer allocation failures, resulting in the device to not pass traffic anymore until it is manually recovered with a restart.This issue affects Junos OS:
* 24.4 releases before 24.4R2,
* 25.2 releases before 25.2R1-S1, 25.2R2.
This issue does not affect Junos OS releases before 24.4R1. |
| A Missing Authentication for Critical Function vulnerability in the Flexible PIC Concentrators (FPCs) of Juniper Networks Junos OS Evolved on PTX Series allows a local, authenticated attacker with low privileges to gain direct access to FPCs installed in the device.
A local user with low privileges can gain direct access to the installed FPCs as a high privileged user, which can potentially lead to a full compromise of the affected component.
This issue affects Junos OS Evolved on PTX10004, PTX10008, PTX100016, with JNP10K-LC1201 or JNP10K-LC1202:
* All versions before 21.2R3-S8-EVO,
* 21.4-EVO versions before 21.4R3-S7-EVO,
* 22.2-EVO versions before 22.2R3-S4-EVO,
* 22.3-EVO versions before 22.3R3-S3-EVO,
* 22.4-EVO versions before 22.4R3-S2-EVO,
* 23.2-EVO versions before 23.2R2-EVO. |
| An Improper Check for Unusual or Exceptional Conditions vulnerability in the flow daemon (flowd) of Juniper Networks Junos OS on SRX Series allows an attacker sending a specific, malformed ICMPv6 packet to cause the srxpfe process to crash and restart. Continued receipt and processing of these packets will repeatedly crash the srxpfe process and sustain the Denial of Service (DoS) condition.
During NAT64 translation, receipt of a specific, malformed ICMPv6 packet destined to the device will cause the srxpfe process to crash and restart.
This issue cannot be triggered using IPv4 nor other IPv6 traffic.
This issue affects Junos OS on SRX Series:
* all versions before 21.2R3-S10,
* all versions of 21.3,
* from 21.4 before 21.4R3-S12,
* all versions of 22.1,
* from 22.2 before 22.2R3-S8,
* all versions of 22.4,
* from 22.4 before 22.4R3-S9,
* from 23.2 before 23.2R2-S6,
* from 23.4 before 23.4R2-S7,
* from 24.2 before 24.2R2-S3,
* from 24.4 before 24.4R2-S3,
* from 25.2 before 25.2R1-S2, 25.2R2. |
| Wasmtime is a runtime for WebAssembly. Prior to 24.0.7, 36.0.7, 42.0.2, and 43.0.1, Wasmtime contains a vulnerability where when transcoding a UTF-16 string to the latin1+utf16 component-model encoding it would incorrectly validate the byte length of the input string when performing a bounds check. Specifically the number of code units were checked instead of the byte length, which is twice the size of the code units. This vulnerability can cause the host to read beyond the end of a WebAssembly's linear memory in an attempt to transcode nonexistent bytes. In Wasmtime's default configuration this will read unmapped memory on a guard page, terminating the process with a segfault. Wasmtime can be configured, however, without guard pages which would mean that host memory beyond the end of linear memory may be read and interpreted as UTF-16. A host segfault is a denial-of-service vulnerability in Wasmtime, and possibly being able to read beyond the end of linear memory is additionally a vulnerability. Note that reading beyond the end of linear memory requires nonstandard configuration of Wasmtime, specifically with guard pages disabled. This vulnerability is fixed in 24.0.7, 36.0.7, 42.0.2, and 43.0.1. |
| Wasmtime is a runtime for WebAssembly. Prior to 24.0.7, 36.0.7, 42.0.2, and 43.0.1, Wasmtime's implementation of transcoding strings into the Component Model's utf16 or latin1+utf16 encodings improperly verified the alignment of reallocated strings. This meant that unaligned pointers could be passed to the host for transcoding which would trigger a host panic. This panic is possible to trigger from malicious guests which transfer very specific strings across components with specific addresses. Host panics are considered a DoS vector in Wasmtime as the panic conditions are controlled by the guest in this situation. This vulnerability is fixed in 24.0.7, 36.0.7, 42.0.2, and 43.0.1. |
| Wasmtime is a runtime for WebAssembly. From 25.0.0 to before 36.0.7, 42.0.2, and 43.0.1, Wasmtime's Winch compiler contains a bug where a 64-bit table, part of the memory64 proposal of WebAssembly, incorrectly translated the table.size instruction. This bug could lead to disclosing data on the host's stack to WebAssembly guests. The host's stack can possibly contain sensitive data related to other host-originating operations which is not intended to be disclosed to guests. This bug specifically arose from a mistake where the return value of table.size was statically typed as a 32-bit integer, as opposed to consulting the table's index type to see how large the returned register could be. When combined with details about Wnich's ABI, such as multi-value returns, this can be combined to read stack data from the host, within a guest. This vulnerability is fixed in 36.0.7, 42.0.2, and 43.0.1. |
| OpenClaw before 2026.3.22 contains a policy confusion vulnerability in room authorization that matches colliding room names instead of stable room tokens. Attackers can exploit similarly named rooms to bypass allowlist policies and gain unauthorized access to protected Nextcloud Talk rooms. |
| OpenClaw before 2026.3.25 contains a server-side request forgery vulnerability in multiple channel extensions that fail to properly guard configured base URLs against SSRF attacks. Attackers can exploit unprotected fetch() calls against configured endpoints to rebind requests to blocked internal destinations and access restricted resources. |
| OpenClaw before 2026.3.23 contains an authentication bypass vulnerability in the Canvas gateway where authorizeCanvasRequest() unconditionally allows local-direct requests without validating bearer tokens or canvas capabilities. Attackers can send unauthenticated loopback HTTP and WebSocket requests to Canvas routes to bypass authentication and gain unauthorized access. |
| OpenClaw before 2026.3.22 performs cite expansion before completing channel and DM authorization checks, allowing cite work and content handling prior to final auth decisions. Attackers can exploit this timing vulnerability to access or manipulate content before proper authorization validation occurs. |
| OpenClaw before 2026.3.22 contains a privilege escalation vulnerability in the Control UI that allows unauthenticated sessions to retain self-declared privileged scopes without device identity verification. Attackers can exploit the device-less allow path in the trusted-proxy mechanism to maintain elevated permissions by declaring arbitrary scopes, bypassing device identity requirements. |
| OpenClaw before 2026.3.25 parses JSON request bodies before validating webhook signatures, allowing unauthenticated attackers to force resource-intensive parsing operations. Remote attackers can send malicious webhook requests to trigger denial of service by exhausting server resources through forced JSON parsing before signature rejection. |
| OpenClaw before 2026.3.25 contains a privilege escalation vulnerability in the gateway plugin subagent fallback deleteSession function that uses a synthetic operator.admin runtime scope. Attackers can exploit this by triggering session deletion without a request-scoped client to execute privileged operations with unintended administrative scope. |
| OpenClaw before 2026.3.25 contains a pre-authentication rate-limit bypass vulnerability in webhook token validation that allows attackers to brute-force weak webhook secrets. The vulnerability exists because invalid webhook tokens are rejected without throttling repeated authentication attempts, enabling attackers to guess weak tokens through rapid successive requests. |
| osslsigncode is a tool that implements Authenticode signing and timestamping. Prior to 2.13, an integer underflow vulnerability exists in osslsigncode version 2.12 and earlier in the PE page-hash computation code (pe_page_hash_calc()). When page hash processing is performed on a PE file, the function subtracts hdrsize from pagesize without first validating that pagesize >= hdrsize. If a malicious PE file sets SizeOfHeaders (hdrsize) larger than SectionAlignment (pagesize), the subtraction underflows and produces a very large unsigned length. The code allocates a zero-filled buffer of pagesize bytes and then attempts to hash pagesize - hdrsize bytes from that buffer. After the underflow, this results in an out-of-bounds read from the heap and can crash the process. The vulnerability can be triggered while signing a malicious PE file with page hashing enabled (-ph), or while verifying a malicious signed PE file that already contains page hashes. Verification of an already signed file does not require the verifier to pass -ph. This vulnerability is fixed in 2.13. |
| Hashgraph Guardian through version 3.5.0 contains an unsandboxed JavaScript execution vulnerability in the Custom Logic policy block worker that allows authenticated Standard Registry users to execute arbitrary code by passing user-supplied JavaScript expressions directly to the Node.js Function() constructor without isolation. Attackers can import native Node.js modules to read arbitrary files from the container filesystem, access process environment variables containing sensitive credentials such as RSA private keys, JWT signing keys, and API tokens, and forge valid authentication tokens for any user including administrators. |
| Directus is a real-time API and App dashboard for managing SQL database content. Prior to 11.17.0, Directus stores revision records (in directus_revisions) whenever items are created or updated. Due to the revision snapshot code not consistently calling the prepareDelta sanitization pipeline, sensitive fields (including user tokens, two-factor authentication secrets, external auth identifiers, auth data, stored credentials, and AI provider API keys) could be stored in plaintext within revision records. This vulnerability is fixed in 11.17.0. |
| Tmds.DBus provides .NET libraries for working with D-Bus from .NET. Tmds.DBus and Tmds.DBus.Protocol are vulnerable to malicious D-Bus peers. A peer on the same bus can spoof signals by impersonating the owner of a well-known name, exhaust system resources or cause file descriptor spillover by sending messages with an excessive number of Unix file descriptors, and crash the application by sending malformed message bodies that cause unhandled exceptions on the SynchronizationContext. This vulnerability is fixed in Tmds.DBus 0.92.0 and Tmds.DBus.Protocol 0.92.0 and 0.21.3. |
| Aiven Operator allows you to provision and manage Aiven Services from your Kubernetes cluster. From 0.31.0 to before 0.37.0, a developer with create permission on ClickhouseUser CRDs in their own namespace can exfiltrate secrets from any other namespace — production database credentials, API keys, service tokens — with a single kubectl apply. The operator reads the victim's secret using its ClusterRole and writes the password into a new secret in the attacker's namespace. The operator acts as a confused deputy: its ServiceAccount has cluster-wide secret read/write (aiven-operator-role ClusterRole), and it trusts user-supplied namespace values in spec.connInfoSecretSource.namespace without validation. No admission webhook enforces this boundary — the ServiceUser webhook returns nil, and no ClickhouseUser webhook exists. This vulnerability is fixed in 0.37.0. |
| MISP is an open source threat intelligence and sharing platform. Prior to 2.5.36, improper neutralization of special elements in an LDAP query in ApacheAuthenticate.php allows LDAP injection via an unsanitized username value when ApacheAuthenticate.apacheEnv is configured to use a user-controlled server variable instead of REMOTE_USER (such as in certain proxy setups). An attacker able to control that value can manipulate the LDAP search filter and potentially bypass authentication constraints or cause unauthorized LDAP queries. This vulnerability is fixed in 2.5.36. |
