| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: ebtables: fix OOB read in compat_mtw_from_user
Luxiao Xu says:
The function compat_mtw_from_user() converts ebtables extensions from
32-bit user structures to kernel native structures. However, it lacks
proper validation of the user-supplied match_size/target_size.
When certain extensions are processed, the kernel-side translation
logic may perform memory accesses based on the extension's expected
size. If the user provides a size smaller than what the extension
requires, it results in an out-of-bounds read as reported by KASAN.
This fix introduces a check to ensure match_size is at least as large
as the extension's required compatsize. This covers matches, watchers,
and targets, while maintaining compatibility with standard targets.
AFAIU this is relevant for matches that need to go though
match->compat_from_user() call. Those that use plain memcpy with the
user-provided size are ok because the caller checks that size vs the
start of the next rule entry offset (which itself is checked vs. total
size copied from userspace).
The ->compat_from_user() callbacks assume they can read compatsize bytes,
so they need this extra check.
Based on an earlier patch from Luxiao Xu. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/uverbs: Validate wqe_size before using it in ib_uverbs_post_send
ib_uverbs_post_send() uses cmd.wqe_size from userspace without any
validation before passing it to kmalloc() and using the allocated
buffer as struct ib_uverbs_send_wr.
If a user provides a small wqe_size value (e.g., 1), kmalloc() will
succeed, but subsequent accesses to user_wr->opcode, user_wr->num_sge,
and other fields will read beyond the allocated buffer, resulting in
an out-of-bounds read from kernel heap memory. This could potentially
leak sensitive kernel information to userspace.
Additionally, providing an excessively large wqe_size can trigger a
WARNING in the memory allocation path, as reported by syzkaller.
This is inconsistent with ib_uverbs_unmarshall_recv() which properly
validates that wqe_size >= sizeof(struct ib_uverbs_recv_wr) before
proceeding.
Add the same validation for ib_uverbs_post_send() to ensure wqe_size
is at least sizeof(struct ib_uverbs_send_wr). |
| In the Linux kernel, the following vulnerability has been resolved:
net/mdiobus: Fix potential out-of-bounds clause 45 read/write access
When using publicly available tools like 'mdio-tools' to read/write data
from/to network interface and its PHY via C45 (clause 45) mdiobus,
there is no verification of parameters passed to the ioctl and
it accepts any mdio address.
Currently there is support for 32 addresses in kernel via PHY_MAX_ADDR define,
but it is possible to pass higher value than that via ioctl.
While read/write operation should generally fail in this case,
mdiobus provides stats array, where wrong address may allow out-of-bounds
read/write.
Fix that by adding address verification before C45 read/write operation.
While this excludes this access from any statistics, it improves security of
read/write operation. |
| Improper Validation of Specified Quantity in Input vulnerability in Magepeople inc. Booking and Rental Manager booking-and-rental-manager-for-woocommerce allows Removing Important Client Functionality.This issue affects Booking and Rental Manager: from n/a through 2.8.0. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: require minimum ACE size in smb_check_perm_dacl()
Both ACE-walk loops in smb_check_perm_dacl() only guard against an
under-sized remaining buffer, not against an ACE whose declared
`ace->size` is smaller than the struct it claims to describe:
if (offsetof(struct smb_ace, access_req) > aces_size)
break;
ace_size = le16_to_cpu(ace->size);
if (ace_size > aces_size)
break;
The first check only requires the 4-byte ACE header to be in bounds;
it does not require access_req (4 bytes at offset 4) to be readable.
An attacker who has set a crafted DACL on a file they own can declare
ace->size == 4 with aces_size == 4, pass both checks, and then
granted |= le32_to_cpu(ace->access_req); /* upper loop */
compare_sids(&sid, &ace->sid); /* lower loop */
reads access_req at offset 4 (OOB by up to 4 bytes) and ace->sid at
offset 8 (OOB by up to CIFS_SID_BASE_SIZE + SID_MAX_SUB_AUTHORITIES
* 4 bytes).
Tighten both loops to require
ace_size >= offsetof(struct smb_ace, sid) + CIFS_SID_BASE_SIZE
which is the smallest valid on-wire ACE layout (4-byte header +
4-byte access_req + 8-byte sid base with zero sub-auths). Also
reject ACEs whose sid.num_subauth exceeds SID_MAX_SUB_AUTHORITIES
before letting compare_sids() dereference sub_auth[] entries.
parse_sec_desc() already enforces an equivalent check (lines 441-448);
smb_check_perm_dacl() simply grew weaker validation over time.
Reachability: authenticated SMB client with permission to set an ACL
on a file. On a subsequent CREATE against that file, the kernel
walks the stored DACL via smb_check_perm_dacl() and triggers the
OOB read. Not pre-auth, and the OOB read is not reflected to the
attacker, but KASAN reports and kernel state corruption are
possible. |
| Out-of-bounds Write (CWE-787) in the PEA archive extraction routine (pea.pas, unpea_procedure) of the first-party pea component in PeaZip 11.2.0 and earlier allows an attacker who convinces a victim to open or extract a crafted .pea archive to execute arbitrary code as the user running PeaZip. While decompressing a PCOMPRESS1 stream, the 32-bit compressed-block-size field of the first block (compsize) is read directly from the archive and used without validation as the length of a blockread into the fixed-size global buffers wbuf1/wbuf2 (1,114,112 bytes) and as the bound of the subsequent copy loop. The existing check "compsize > WBUFSIZE" is applied only to the size of each following block, so the first block escapes it; the same unvalidated value is also used to index wbuf1[compsize], an out-of-bounds read at an attacker-chosen offset. The copy loop additionally copies the requested length instead of the number of bytes actually read, and terminates on equality rather than on an upper bound. Because the project is built without range checking and no archive password, integrity tag or non-default configuration is required, the overflow overwrites adjacent global data; code execution was demonstrated by two independent researchers against the official Linux x86-64 and Windows x64 builds, and the denial-of-service and memory-corruption primitive is cross-platform (Windows, macOS, Linux, BSD). |
| modern-tar 0.3.5 through 0.8.5 contains a memory exhaustion vulnerability that allows attackers to produce negative entry sizes via non-octal bytes parsed by readOctal(). Attackers can supply a crafted, optionally gzip-compressed, archive to unpackTar() that buffers chunks indefinitely, exhausting process memory and suppressing later entries. |
| This CVE ID has been rejected or withdrawn by its CVE Numbering Authority. |
| Improper Validation of Specified Quantity in Input vulnerability in VideoWhisper.com Paid Videochat Turnkey Site ppv-live-webcams allows Input Data Manipulation.This issue affects Paid Videochat Turnkey Site: from n/a through 7.5.12. |
| Subscriber Bypass Vulnerability in MicroPayments <= 3.2.9 versions. |
| Improper Validation of Specified Quantity in Input in GitHub repository vim/vim prior to 9.0.0218. |
| vLLM is an inference and serving engine for large language models. Prior to 0.30.0, the /inference/v1/generate endpoint in the disaggregated scale-out path accepts caller-supplied tensors in the features.kwargs_data field, cache identifiers in the features.mm_hashes field, ranges in the features.mm_placeholders field, and wire-selected multimodal field processors without rebinding them to the active model renderer contract. Forged grid geometry, field types, or non-positive placeholder lengths can terminate the shared EngineCore; when an attacker knows or can induce a victim's content hash, forged cache hashes can poison or retrieve cross-request encoder-cache state; and dropped sparse placeholder masks can alter replayed transport semantics. This issue is fixed in version 0.30.0. |
| Kiteworks did not enforce the maximum permitted value for a configurable security-policy setting. An authenticated administrator could set this value outside its intended range so that the associated control never activated, while the control continued to appear enabled in the administrative interface and audit log, allowing it to be silently rendered ineffective. |
| In the Linux kernel, the following vulnerability has been resolved:
neighbour: Enforce min/max to NDTPA_INTERVAL_PROBE_TIME_MS.
NDTPA_INTERVAL_PROBE_TIME_MS sets .type and .min but misses
.validation_type, so no validation is applied:
# ynl --family rt-neigh --do setneightbl \
--json '{"name": "arp_cache", "parms": {"interval-probe-time-ms": 0}}'
# ynl --family rt-neigh --dump getneightbl --output-json | \
jq '.[] | select(.name == "arp_cache" and has("config"))
| .parms["interval-probe-time-ms"]'
0
Moreover, nla_get_msecs() uses msecs_to_jiffies(), and u64 is
silently cast to u32, so a larger value can bypass the min check:
e.g. 4294967296 == 0x100000000
# ynl --family rt-neigh --do setneightbl \
--json '{"name": "arp_cache", "parms": {"interval-probe-time-ms": 4294967296}}'
# ynl --family rt-neigh --dump getneightbl --output-json | \
jq '.[] | select(.name == "arp_cache" and has("config"))
| .parms["interval-probe-time-ms"]'
0
msecs_to_jiffies() returns MAX_JIFFY_OFFSET if the value is
larger than INT_MAX. Also, INT_MAX ms overflows int NEIGH_VAR()
when HZ > 1000 (Alpha, MIPS), and passing a negative integer to
queue_delayed_work(unsigned long delay) causes sign extension,
which wraps around the expiry time to the past, resulting in it
being handled as 0 delay in the timer wheel.
Let's use NLA_POLICY_FULL_RANGE() and limit the max to 1 day.
The same max check is applied to sysctl as well.
Note that this controls the probe interval for NTF_MANAGED
entries, so the max of 1 day is unlikely to break any
deployments. |
| H5Z__filter_fletcher32 in H5Zfletcher32.c in HDF5 prior to 2.3.0 computes the data length to checksum by subtracting the 4-byte trailing checksum size from the input buffer size without checking that the buffer is at least 4 bytes, allowing a size_t underflow. This allows attackers to cause a denial of service (massively out-of-bounds read and application crash in H5_checksum_fletcher32) via a crafted HDF5 file with a Fletcher32-filtered chunk smaller than 4 bytes, triggered via H5Dread, e.g. by the h5ls or h5dump tools. |
| H5Z__filter_nbit in H5Znbit.c in HDF5 prior to 2.3.0 dereferences cd_values[0] through cd_values[4] without validating that cd_values is non-NULL or that cd_nelmts is at least 5, the fixed size of the filter's header. This allows attackers to cause a denial of service via a crafted HDF5 file that stores the N-Bit filter pipeline message with zero client-data values, opened and read via H5Dread, e.g. by the h5ls or h5repack tools. |
| An integer underflow vulnerability in the WatchGuard Fireware OS IKE daemon (iked) allows a remote attacker who has completed the initial IKEv2 handshake to crash the iked process by sending a specially crafted encrypted IKEv2 message, resulting in a denial of service. |
| Improper Validation of Specified Quantity in Input vulnerability in VillaTheme BuildKit – Product Builder for WooCommerce – Custom PC Builder woo-product-builder allows Input Data Manipulation.This issue affects BuildKit – Product Builder for WooCommerce – Custom PC Builder: from n/a through 1.0.28. |
| Improper validation of specified quantity in input, Allocation of resources without limits or throttling vulnerability in Apache Thrift nodejs bindings.
This issue affects Apache Thrift: before 0.25.0.
Users are recommended to upgrade to version 0.25.0, which fixes the issue. |
| Improper Validation of Specified Quantity in Input vulnerability in Magepeople inc. Taxi Booking Manager for WooCommerce ecab-taxi-booking-manager allows Input Data Manipulation.This issue affects Taxi Booking Manager for WooCommerce: from n/a through 2.1.1. |
