| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| APIs to evaluate content with Velocity is a package for APIs to evaluate content with Velocity. Starting with version 2.3 and prior to 12.6.7, 12.10.3, and 13.0, the velocity scripts are not properly sandboxed against using the Java File API to perform read or write operations on the filesystem. Writing an attacking script in Velocity requires the Script rights in XWiki so not all users can use it, and it also requires finding an XWiki API which returns a File. The problem has been patched in versions 12.6.7, 12.10.3, and 13.0. There is no easy workaround for fixing this vulnerability other than upgrading and being careful when giving Script rights. |
| OpenClinica is an open source software for Electronic Data Capture (EDC) and Clinical Data Management (CDM). OpenClinica prior to version 3.16 is vulnerable to path traversal in multiple endpoints, leading to arbitrary file read/write, and potential remote code execution. There are no known workarounds. This issue has been patched and users are recommended to upgrade. |
| django-s3file is a lightweight file upload input for Django and Amazon S3 . In versions prior to 5.5.1 it was possible to traverse the entire AWS S3 bucket and in most cases to access or delete files. If the `AWS_LOCATION` setting was set, traversal was limited to that location only. The issue was discovered by the maintainer. There were no reports of the vulnerability being known to or exploited by a third party, prior to the release of the patch. The vulnerability has been fixed in version 5.5.1 and above. There is no feasible workaround. We must urge all users to immediately updated to a patched version. |
| UltraJSON is a fast JSON encoder and decoder written in pure C with bindings for Python 3.7+. Affected versions were found to improperly decode certain characters. JSON strings that contain escaped surrogate characters not part of a proper surrogate pair were decoded incorrectly. Besides corrupting strings, this allowed for potential key confusion and value overwriting in dictionaries. All users parsing JSON from untrusted sources are vulnerable. From version 5.4.0, UltraJSON decodes lone surrogates in the same way as the standard library's `json` module does, preserving them in the parsed output. Users are advised to upgrade. There are no known workarounds for this issue. |
| The AWS SDK for Java enables Java developers to work with Amazon Web Services. A partial-path traversal issue exists within the `downloadDirectory` method in the AWS S3 TransferManager component of the AWS SDK for Java v1 prior to version 1.12.261. Applications using the SDK control the `destinationDirectory` argument, but S3 object keys are determined by the application that uploaded the objects. The `downloadDirectory` method allows the caller to pass a filesystem object in the object key but contained an issue in the validation logic for the key name. A knowledgeable actor could bypass the validation logic by including a UNIX double-dot in the bucket key. Under certain conditions, this could permit them to retrieve a directory from their S3 bucket that is one level up in the filesystem from their working directory. This issue’s scope is limited to directories whose name prefix matches the destinationDirectory. E.g. for destination directory`/tmp/foo`, the actor can cause a download to `/tmp/foo-bar`, but not `/tmp/bar`. If `com.amazonaws.services.s3.transfer.TransferManager::downloadDirectory` is used to download an untrusted buckets contents, the contents of that bucket can be written outside of the intended destination directory. Version 1.12.261 contains a patch for this issue. As a workaround, when calling `com.amazonaws.services.s3.transfer.TransferManager::downloadDirectory`, pass a `KeyFilter` that forbids `S3ObjectSummary` objects that `getKey` method return a string containing the substring `..` . |
| MinIO is a High Performance Object Storage released under GNU Affero General Public License v3.0. In affected versions all 'admin' users authorized for `admin:ServerUpdate` can selectively trigger an error that in response, returns the content of the path requested. Any normal OS system would allow access to contents at any arbitrary paths that are readable by MinIO process. Users are advised to upgrade. Users unable to upgrade may disable ServerUpdate API by denying the `admin:ServerUpdate` action for your admin users via IAM policies. |
| Sanic is an opensource python web server/framework. Affected versions of sanic allow access to lateral directories when using `app.static` if using encoded `%2F` URLs. Parent directory traversal is not impacted. Users are advised to upgrade. There is no known workaround for this issue. |
| Venice is a Clojure inspired sandboxed Lisp dialect with excellent Java interoperability. A partial path traversal issue exists within the functions `load-file` and `load-resource`. These functions can be limited to load files from a list of load paths. Assuming Venice has been configured with the load paths: `[ "/Users/foo/resources" ]` When passing **relative** paths to these two vulnerable functions everything is fine: `(load-resource "test.png")` => loads the file "/Users/foo/resources/test.png" `(load-resource "../resources-alt/test.png")` => rejected, outside the load path When passing **absolute** paths to these two vulnerable functions Venice may return files outside the configured load paths: `(load-resource "/Users/foo/resources/test.png")` => loads the file "/Users/foo/resources/test.png" `(load-resource "/Users/foo/resources-alt/test.png")` => loads the file "/Users/foo/resources-alt/test.png" !!! The latter call suffers from the _Partial Path Traversal_ vulnerability. This issue’s scope is limited to absolute paths whose name prefix matches a load path. E.g. for a load-path `"/Users/foo/resources"`, the actor can cause loading a resource also from `"/Users/foo/resources-alt"`, but not from `"/Users/foo/images"`. Versions of Venice before and including v1.10.17 are affected by this issue. Upgrade to Venice >= 1.10.18, if you are on a version < 1.10.18. There are currently no known workarounds. |
| Tauri is a framework for building binaries for all major desktop platforms. Due to missing canonicalization when `readDir` is called recursively, it was possible to display directory listings outside of the defined `fs` scope. This required a crafted symbolic link or junction folder inside an allowed path of the `fs` scope. No arbitrary file content could be leaked. The issue has been resolved in version 1.0.6 and the implementation now properly checks if the requested (sub) directory is a symbolic link outside of the defined `scope`. Users are advised to upgrade. Users unable to upgrade should disable the `readDir` endpoint in the `allowlist` inside the `tauri.conf.json`. |
| Gin-vue-admin is a backstage management system based on vue and gin, which separates the front and rear of the full stack. Gin-vue-admin prior to 2.5.4 is vulnerable to path traversal, which leads to file upload vulnerabilities. Version 2.5.4 contains a patch for this issue. There are no workarounds aside from upgrading to a patched version. |
| QTIWorks is a software suite for standards-based assessment delivery. Prior to version 1.0-beta15, the QTIWorks Engine allows users to upload QTI content packages as ZIP files. The ZIP handling code does not sufficiently check the paths of files contained within ZIP files, so can insert files into other locations in the filesystem if they are writable by the process running the QTIWorks Engine. In extreme cases, this could allow anonymous users to change files in arbitrary locations in the filesystem. In normal QTIWorks Engine deployments, the impact is somewhat reduced because the default QTIWorks configuration does not enable the public demo functionality, so ZIP files can only be uploaded by users with "instructor" privileges. This vulnerability is fixed in version 1.0-beta15. There are no database configuration changes required when upgrading to this version. No known workarounds for this issue exist. |
| A path traversal vulnerability was identified in GitHub Enterprise Server that allowed remote code execution when building a GitHub Pages site. To exploit this vulnerability, an attacker would need permission to create and build a GitHub Pages site on the instance. This vulnerability was fixed in versions 3.3.17, 3.4.12, 3.5.9, 3.6.5 and 3.7.2. This vulnerability was reported via the GitHub Bug Bounty program. |
| An improper limitation of a pathname to a restricted directory vulnerability was identified in GitHub Enterprise Server that enabled remote code execution. A check was added within Pages to ensure the working directory is clean before unpacking new content to prevent an arbitrary file overwrite bug. This vulnerability affected only version 3.7.0 of GitHub Enterprise Server and was fixed in version 3.7.1. This vulnerability was reported via the GitHub Bug Bounty program. |
| The vRealize Log Insight contains a Directory Traversal Vulnerability. An unauthenticated, malicious actor can inject files into the operating system of an impacted appliance which can result in remote code execution. |
| Lancet is a general utility library for the go programming language. Affected versions are subject to a ZipSlip issue when using the fileutil package to unzip files. This issue has been addressed and a fix will be included in versions 2.1.10 and 1.3.4. Users are advised to upgrade. There are no known workarounds for this issue. |
| A vulnerability was found in SourceCodester Insurance Management System 1.0. It has been declared as problematic. Affected by this vulnerability is an unknown functionality of the file /E-Insurance/. The manipulation leads to direct request. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. The identifier VDB-272365 was assigned to this vulnerability. |
| Any user can delete an arbitrary folder (recursively) on a remote server due to bad input sanitization leading to path traversal. The attacker would need access to the server at some privilege level since this endpoint is protected and requires authorization. |
| In writeApplicationRestrictionsLAr of UserManagerService.java, there is a possible overwrite of system files due to a path traversal error. This could lead to local denial of service with System execution privileges needed. User interaction is not needed for exploitation.Product: AndroidVersions: Android-10 Android-11 Android-12 Android-12L Android-13Android ID: A-239701237 |
| ICEcoder 8.1 contains a Path Traversal vulnerability via lib/backup-versions-preview-loader.php. |
| E.D.D.I (Enhanced Dialog Driven Interface) is a middleware to connect and manage LLM API bots. In versions before 5.5.0, an attacker with access to the `/backup/import` API endpoint can write arbitrary files to locations outside the intended extraction directory due to a Zip Slip vulnerability. Although the application runs as a non-root user (`185`), limiting direct impact on system-level files, this vulnerability can still be exploited to overwrite application files (e.g., JAR libraries) owned by the application user. This overwrite can potentially lead to Remote Code Execution (RCE) within the application's context. This issue has been patched in version 5.5.0. |
