| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| sagemaker-python-sdk is a library for training and deploying machine learning models on Amazon SageMaker. The sagemaker.base_deserializers.NumpyDeserializer module before v2.218.0 allows potentially unsafe deserialization when untrusted data is passed as pickled object arrays. This consequently may allow an unprivileged third party to cause remote code execution, denial of service, affecting both confidentiality and integrity. Users are advised to upgrade to version 2.218.0. Users unable to upgrade should not pass pickled numpy object arrays which originated from an untrusted source, or that could have been tampered with. Only pass pickled numpy object arrays from trusted sources. |
| A remote code execution (RCE) vulnerability exists in the ms-swift project version 3.3.0 due to unsafe deserialization in tests/run.py using yaml.load() from the PyYAML library (versions = 5.3.1). If an attacker can control the content of the YAML configuration file passed to the --run_config parameter, arbitrary code can be executed during deserialization. This can lead to full system compromise. The vulnerability is triggered when a malicious YAML file is loaded, allowing the execution of arbitrary Python commands such as os.system(). It is recommended to upgrade PyYAML to version 5.4 or higher, and to use yaml.safe_load() to mitigate the issue. |
| A vulnerability has been found in Dromara Sa-Token up to 1.44.0. This issue affects the function ObjectInputStream.readObject of the file SaSerializerTemplateForJdkUseBase64.java. Such manipulation leads to deserialization. The attack can be executed remotely. This attack is characterized by high complexity. The exploitability is assessed as difficult. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| The education theme for WordPress is vulnerable to PHP Object Injection in all versions up to, and including, 3.6.10 via deserialization of untrusted input in the 'themerex_callback_view_more_posts' function. This makes it possible for unauthenticated attackers to inject a PHP Object. No known POP chain is present in the vulnerable software, which means this vulnerability has no impact unless another plugin or theme containing a POP chain is installed on the site. If a POP chain is present via an additional plugin or theme installed on the target system, it may allow the attacker to perform actions like delete arbitrary files, retrieve sensitive data, or execute code depending on the POP chain present. |
| Prebid.js is a free and open source library for publishers to quickly implement header bidding. NPM users of prebid 10.9.2 may have been briefly compromised by a malware campaign. The malicious code attempts to redirect crypto transactions on the site to the attackers' wallet. Version 10.10.0 fixes the issue. As a workaround, it is also possible to downgrade to 10.9.1. |
| An authenticated user can modify application state data. |
| Tencent HunyuanVideo load_vae Deserialization of Untrusted Data Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of Tencent HunyuanVideo. User interaction is required to exploit this vulnerability in that the target must visit a malicious page or open a malicious file.
The specific flaw exists within the load_vae function.The issue results from the lack of proper validation of user-supplied data, which can result in deserialization of untrusted data. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-27186. |
| Prebid Universal Creative (PUC) is a JavaScript API to render multiple formats. Npm users of PUC 1.17.3 or PUC latest were briefly affected by crypto-related malware. This includes the extremely popular jsdelivr hosting of this file. The maintainers of PUC unpublished version 1.17.3. Users should see Prebid.js 9 release notes for suggestions on moving off the deprecated workflow of using the PUC or pointing to a dynamic version of it. PUC users pointing to latest should transition to 1.17.2 as soon as possible to avoid similar attacks in the future. |
| Tencent NeuralNLP-NeuralClassifier _load_checkpoint Deserialization of Untrusted Data Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of Tencent NeuralNLP-NeuralClassifier. User interaction is required to exploit this vulnerability in that the target must visit a malicious page or open a malicious file.
The specific flaw exists within the _load_checkpoint function. The issue results from the lack of proper validation of user-supplied data, which can result in deserialization of untrusted data. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-27184. |
| Deseriliazation of untrusted data can occur in versions 3.7.0 or newer of Ydata's ydata-profiling open-source library, enabling a maliciously crafted dataset to run arbitrary code on an end user's system when loaded. |
| Deserialization of untrusted data can occur in versions 0.6 or newer of the skops python library, enabling a maliciously crafted model to run arbitrary code on an end user's system when loaded. |
| H3C Intelligent Management Center (IMC) versions up to and including E0632H07 contains a remote command execution vulnerability in the /byod/index.xhtml endpoint. Improper handling of JSF ViewState allows unauthenticated attackers to craft POST requests with forged javax.faces.ViewState parameters, potentially leading to arbitrary command execution. This flaw does not require authentication and may be exploited without session cookies. An affected version range is undefined. Exploitation evidence was first observed by the Shadowserver Foundation on 2024-08-28 UTC. |
| A vulnerability, which was classified as critical, was found in lty628 Aidigu up to 1.8.2. This affects the function checkUserCookie of the file /application/common.php of the component PHP Object Handler. The manipulation of the argument rememberMe leads to deserialization. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. |
| Deserialization of Untrusted Data vulnerability in uxper Togo togo.This issue affects Togo: from n/a through < 1.0.4. |
| Deserialization of Untrusted Data vulnerability in Cozmoslabs TranslatePress translatepress-multilingual allows Object Injection.This issue affects TranslatePress: from n/a through <= 2.10.2. |
| is-arrayish checks if an object can be used like an Array. On 8 September 2025, an npm publishing account for is-arrayish was taken over after a phishing attack. Version 0.3.3 was published, functionally identical to the previous patch version, but with a malware payload added attempting to redirect cryptocurrency transactions to the attacker's own addresses from within browser environments. Local environments, server environments, command line applications, etc. are not affected. If the package was used in a browser context (e.g. a direct <script> inclusion, or via a bundling tool such as Babel, Rollup, Vite, Next.js, etc.) there is a chance the malware still exists and such bundles will need to be rebuilt. The malware seemingly only targets cryptocurrency transactions and wallets such as MetaMask. See references below for more information on the payload. npm removed the offending package from the registry over the course of the day on 8 September, preventing further downloads from npm proper. On 13 September, the package owner published new patch versions to help cache-bust those using private registries who might still have the compromised version cached. Users should update to the latest patch version, completely remove their node_modules directory, clean their package manager's global cache, and rebuild any browser bundles from scratch. Those operating private registries or registry mirrors should purge the offending versions from any caches. This issue is resolved in 0.3.4. |
| PixelYourSite - Your smart PIXEL (TAG) and API Manager 10.1.1.1 was found to be vulnerable. Unvalidated user input is used directly in an unserialize function in myapp/modules/facebook/facebook-server-a sync-task.php. |
| Deserialization of Untrusted Data vulnerability in Cristián Lávaque s2Member s2member allows Object Injection.This issue affects s2Member: from n/a through <= 250701. |
| kurwov is a fast, dependency-free library for creating Markov Chains. An unsafe sanitization of dataset contents on the `MarkovData#getNext` method used in `Markov#generate` and `Markov#choose` allows a maliciously crafted string on the dataset to throw and stop the function from running properly. If a string contains a forbidden substring (i.e. `__proto__`) followed by a space character, the code will access a special property in `MarkovData#finalData` by removing the last character of the string, bypassing the dataset sanitization (as it is supposed to be already sanitized before this function is called). Any dataset can be contaminated with the substring making it unable to properly generate anything in some cases. This issue has been addressed in version 3.2.5 and all users are advised to upgrade. There are no known workarounds for this vulnerability. |
| The WooCommerce Recover Abandoned Cart plugin for WordPress is vulnerable to PHP Object Injection in all versions up to, and including, 24.4.0 via deserialization of untrusted input from the 'raccookie_guest_email' cookie. This makes it possible for unauthenticated attackers to inject a PHP Object. No known POP chain is present in the vulnerable software, which means this vulnerability has no impact unless another plugin or theme containing a POP chain is installed on the site. If a POP chain is present via an additional plugin or theme installed on the target system, it may allow the attacker to perform actions like delete arbitrary files, retrieve sensitive data, or execute code depending on the POP chain present. |
