| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A vulnerability in the implementation of the TACACS+ protocol in Cisco IOS Software and Cisco IOS XE Software could allow an unauthenticated, remote attacker to view sensitive data or bypass authentication.
This vulnerability exists because the system does not properly check whether the required TACACS+ shared secret is configured. A machine-in-the-middle attacker could exploit this vulnerability by intercepting and reading unencrypted TACACS+ messages or impersonating the TACACS+ server and falsely accepting arbitrary authentication requests. A successful exploit could allow the attacker to view sensitive information in a TACACS+ message or bypass authentication and gain access to the affected device. |
| A vulnerability in the access control list (ACL) processing of IPv4 packets of Cisco SD-WAN vEdge Software could allow an unauthenticated, remote attacker to bypass a configured ACL.
This vulnerability is due to the improper enforcement of the implicit deny all at the end of a configured ACL. An attacker could exploit this vulnerability by attempting to send unauthorized traffic to an interface on an affected device. A successful exploit could allow the attacker to bypass an ACL on the affected device. |
| A vulnerability in the web-based management interface of Cisco Unified Industrial Wireless Software for Cisco Ultra-Reliable Wireless Backhaul (URWB) Access Points could allow an unauthenticated, remote attacker to perform command injection attacks with root privileges on the underlying operating system.
This vulnerability is due to improper validation of input to the web-based management interface. An attacker could exploit this vulnerability by sending crafted HTTP requests to the web-based management interface of an affected system. A successful exploit could allow the attacker to execute arbitrary commands with root privileges on the underlying operating system of the affected device. |
| A vulnerability in Cisco NX-OS Software could allow an authenticated, local attacker with privileges to access the Bash shell to execute arbitrary code as root on an affected device.
This vulnerability is due to insufficient security restrictions when executing commands from the Bash shell. An attacker with privileges to access the Bash shell could exploit this vulnerability by executing a specific crafted command on the underlying operating system. A successful exploit could allow the attacker to execute arbitrary code with the privileges of root. |
| The Versa Director SD-WAN orchestration platform which makes use of Cisco NCS application service. Active and Standby Directors communicate over TCP ports 4566 and 4570 to exchange High Availability (HA) information using a shared password. Affected versions of Versa Director bound to these ports on all interfaces. An attacker that can access the Versa Director could access the NCS service on port 4566 and exploit it to perform unauthorized administrative actions and perform remote code execution. Customers are recommended to follow the hardening guide.
Versa Networks is not aware of any reported instance where this vulnerability was exploited. Proof of concept for this vulnerability has been disclosed by third party security researchers. |
| A vulnerability in the Switch Integrated Security Features (SISF) of Cisco IOS Software, Cisco IOS XE Software, Cisco NX-OS Software, and Cisco Wireless LAN Controller (WLC) AireOS Software could allow an unauthenticated, adjacent attacker to cause a denial of service (DoS) condition on an affected device.
This vulnerability is due to the incorrect handling of DHCPv6 packets. An attacker could exploit this vulnerability by sending a crafted DHCPv6 packet to an affected device. A successful exploit could allow the attacker to cause the device to reload, resulting in a DoS condition. |
| A vulnerability in the SSH connection handling of Cisco Integrated Management Controller (IMC) for Cisco UCS B-Series, UCS C-Series, UCS S-Series, and UCS X-Series Servers could allow an authenticated, remote attacker to access internal services with elevated privileges.
This vulnerability is due to insufficient restrictions on access to internal services. An attacker with a valid user account could exploit this vulnerability by using crafted syntax when connecting to the Cisco IMC of an affected device through SSH. A successful exploit could allow the attacker to access internal services with elevated privileges, which may allow unauthorized modifications to the system, including the possibility of creating new administrator accounts on the affected device. |
| A vulnerability in the IPv6 Router Advertisement (RA) packet processing of Cisco Access Point Software could allow an unauthenticated, adjacent attacker to modify the IPv6 gateway on an affected device.
This vulnerability is due to a logic error in the processing of IPv6 RA packets that are received from wireless clients. An attacker could exploit this vulnerability by associating to a wireless network and sending a series of crafted IPv6 RA packets. A successful exploit could allow the attacker to temporarily change the IPv6 gateway of an affected device. This could also lead to intermittent packet loss for any wireless clients that are associated with the affected device. |
| A vulnerability in the HTTP API subsystem of Cisco IOS XE Software could allow a remote attacker to inject commands that will execute with root privileges into the underlying operating system.
This vulnerability is due to insufficient input validation. An attacker with administrative privileges could exploit this vulnerability by authenticating to an affected system and performing an API call with crafted input. Alternatively, an unauthenticated attacker could persuade a legitimate user with administrative privileges who is currently logged in to the system to click a crafted link. A successful exploit could allow the attacker to execute arbitrary commands as the root user. |
| A vulnerability in the web UI of Cisco IOS Software could allow an authenticated, remote attacker with low privileges to cause a denial of service (DoS) condition on an affected device.
This vulnerability is due to improper input validation. An attacker could exploit this vulnerability by sending a crafted URL in an HTTP request. A successful exploit could allow the attacker to cause the affected device to reload, resulting in a DoS condition. |
| A vulnerability in the access control list (ACL) programming of Cisco IOS XE Software for Cisco Catalyst 9500X and 9600X Series Switches could allow an unauthenticated, remote attacker to bypass a configured ACL on an affected device.
This vulnerability is due to the flooding of traffic from an unlearned MAC address on a switch virtual interface (SVI) that has an egress ACL applied. An attacker could exploit this vulnerability by causing the VLAN to flush its MAC address table. This condition can also occur if the MAC address table is full. A successful exploit could allow the attacker to bypass an egress ACL on an affected device. |
| A vulnerability in Cisco IOS XE Software could allow an authenticated, local attacker with level-15 privileges or an unauthenticated attacker with physical access to an affected device to execute persistent code at boot time and break the chain of trust. This vulnerability is due to improper validation of software packages. An attacker could exploit this vulnerability by placing a crafted file into a specific location on an affected device. A successful exploit could allow the attacker to execute persistent code on the underlying operating system. Because this vulnerability allows an attacker to bypass a major security feature of a device, Cisco has raised the Security Impact Rating (SIR) of this advisory from Medium to High. |
| Multiple vulnerabilities in Cisco IOS XE Software of could allow an authenticated, local attacker with level-15 privileges or an unauthenticated attacker with physical access to the device to execute persistent code at boot time and break the chain of trust.
These vulnerabilities are due path traversal and improper image integrity validation. A successful exploit could allow the attacker to execute persistent code on the underlying operating system.
Because this allows the attacker to bypass a major security feature of the device, Cisco has raised the Security Impact Rating (SIR) of this advisory from Medium to High.
For more information about these vulnerabilities, see the Details ["#details"] section of this advisory.
ERP |
| A vulnerability in the Day One setup process of Cisco IOS XE Software for Catalyst 9800 Series Wireless Controllers for Cloud (9800-CL) could allow an unauthenticated, remote attacker to access the public-key infrastructure (PKI) server that is running on an affected device.
This vulnerability is due to incomplete cleanup upon completion of the Day One setup process. An attacker could exploit this vulnerability by sending Simple Certificate Enrollment Protocol (SCEP) requests to an affected device. A successful exploit could allow the attacker to request a certificate from the virtual wireless controller and then use the acquired certificate to join an attacker-controlled device to the virtual wireless controller. |
| A vulnerability in the Web Authentication feature of Cisco IOS XE Software could allow an unauthenticated, remote attacker to conduct a reflected cross-site scripting attack (XSS) on an affected device.
This vulnerability is due to improper sanitization of user-supplied input. An attacker could exploit this vulnerability by persuading a user to click a malicious link. A successful exploit could allow the attacker to execute a reflected XSS attack and steal user cookies from the affected device. |
| A vulnerability in the DHCPv6 relay agent of Cisco NX-OS Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device.
This vulnerability is due to improper handling of specific fields in a DHCPv6 RELAY-REPLY message. An attacker could exploit this vulnerability by sending a crafted DHCPv6 packet to any IPv6 address that is configured on an affected device. A successful exploit could allow the attacker to cause the dhcp_snoop process to crash and restart multiple times, causing the affected device to reload and resulting in a DoS condition. |
| A vulnerability in the CLI of Cisco NX-OS Software could allow an authenticated, low-privileged, local attacker to execute arbitrary commands on the underlying operating system of an affected device.
This vulnerability is due to insufficient validation of arguments for a specific CLI command. An attacker could exploit this vulnerability by including crafted input as the argument of the affected command. A successful exploit could allow the attacker to execute arbitrary commands on the underlying operating system with the privileges of the currently logged-in user. |
| A vulnerability in the ipsecmgr process of Cisco ASR 5000 Series Software (StarOS) could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition.
This vulnerability is due to insufficient validation of incoming Internet Key Exchange Version 2 (IKEv2) packets. An attacker could exploit this vulnerability by sending specifically malformed IKEv2 packets to an affected device. A successful exploit could allow the attacker to cause the ipsecmgr process to restart, which would disrupt ongoing IKE negotiations and result in a temporary DoS condition.Cisco has released software updates that address this vulnerability. There are no workarounds that address this vulnerability. |
| Multiple Cisco products are affected by a vulnerability in the Ethernet Frame Decoder of the Snort detection engine that could allow an unauthenticated, adjacent attacker to cause a denial of service (DoS) condition.
The vulnerability is due to improper handling of error conditions when processing Ethernet frames. An attacker could exploit this vulnerability by sending malicious Ethernet frames through an affected device. A successful exploit could allow the attacker to exhaust disk space on the affected device, which could result in administrators being unable to log in to the device or the device being unable to boot up correctly.Note: Manual intervention is required to recover from this situation. Customers are advised to contact the Cisco Technical Assistance Center (TAC) to help recover a device in this condition.Cisco has released software updates that address this vulnerability. There are no workarounds that address this vulnerability. |
| A vulnerability in the web-based management interface of Cisco Small Business RV042 Dual WAN VPN Routers and Cisco Small Business RV042G Dual Gigabit WAN VPN Routers could allow an unauthenticated, remote attacker to conduct a cross-site scripting (XSS) attack against a user of the web-based management interface of an affected device.
The vulnerability is due to insufficient validation of user-supplied input by the web-based management interface of the affected software. An attacker could exploit this vulnerability by persuading a user of the interface to click a crafted link. A successful exploit could allow the attacker to execute arbitrary script code in the context of the affected interface or access sensitive browser-based information.Cisco has released software updates that address this vulnerability. There are no workarounds that address this vulnerability. |
