| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| CoreDNS is a DNS server written in Go. Prior to 1.14.7, the DNS-over-HTTPS, DNS-over-HTTP/3, DNS-over-QUIC, and DNS-over-gRPC listeners in plugin/pkg/doh/doh.go, core/dnsserver/server_quic.go, and core/dnsserver/server_grpc.go call dns.Msg.Unpack without the dns.DefaultMsgAcceptFunc request policy used by UDP, TCP, and DNS-over-TLS. An unauthenticated client can send an RFC 2136 UPDATE that the proxy or forward plugin passes unchanged to an update-capable upstream. If that upstream trusts CoreDNS's source address or connection and does not require an attacker-unknown end-to-end TSIG, the request appears to originate from CoreDNS and can add, replace, or delete DNS records, redirect traffic, take over names, alter mail routing, or disrupt the writable zone. This issue is fixed in version 1.14.7. |
| HAPI FHIR is a complete implementation of the HL7 FHIR standard for healthcare interoperability in Java. Prior to version 6.9.12, SHCParser in org.hl7.fhir.r5/src/main/java/org/hl7/fhir/r5/elementmodel/SHCParser.java can consume attacker-controlled Smart Health Card JWT content whose header contains zip: "DEF" and whose small raw-DEFLATE payload expands to a very large value. SHCParser.decodeJWT() passes the decoded payload to SHCParser.inflate(), which accumulates all decompressed bytes in a ByteArrayOutputStream without an output-size limit before JSON parsing, and SHCParser.decompress() contains the same unbounded pattern. An application or validator service that accepts attacker-supplied SHC content can therefore suffer excessive heap allocation, severe garbage-collection pressure, request failure, process instability, or process termination. This issue is fixed in version 6.9.12. |
| On affected platforms running Arista EOS with VRRPv2 IP-AH authentication configured, an unauthenticated attacker within the same layer 2 network segment on which VRRP is running can capture a legitimate authenticated VRRP advertisement and replay it indefinitely. Replayed advertisements can be used to advertise stale VRRP state, for example to prevent a backup router from taking over the virtual gateway after the original master has gone down, resulting in a denial of service for hosts using the virtual gateway address. |
| HAPI FHIR is a complete implementation of the HL7 FHIR standard for healthcare interoperability in Java. Prior to version 6.9.12, SHCParser in org.hl7.fhir.r5/src/main/java/org/hl7/fhir/r5/elementmodel/SHCParser.java can enter an infinite loop while processing attacker-controlled Smart Health Card JWT content whose header contains zip: "DEF" and whose raw-DEFLATE payload is empty or truncated. SHCParser.decodeJWT() reaches SHCParser.inflate(), where Inflater.inflate() can return zero while Inflater.finished() remains false and Inflater.needsInput() is true. The loop also lacks an Inflater.needsDictionary() termination check, SHCParser.decompress() contains the same zero-progress pattern, and ResourceChecker.java can reach SHC parsing during file-format detection. A malformed validation request can pin a JVM worker thread indefinitely, and concurrent requests can exhaust all validation workers. This issue is fixed in version 6.9.12. |
| On affected platforms running Arista EOS with VRRP enabled, the peer device VRRP authentication credentials are logged in cleartext on the switch, allowing an authenticated user with sufficient privileges to view agent trace logs (or a system receiving forwarded log output) to obtain the peer device VRRP authentication credentials without having access to the network segment on which VRRP is running. |
| On affected platforms running Arista EOS with IGMP (Internet Group Management Protocol) snooping configured (enabled by default on all VLANs), a network-adjacent unauthenticated attacker can send malformed network packets on an affected VLAN to cause the IGMP snooping agent to terminate unexpectedly. This results in a temporary disruption of multicast traffic management, which may cause multicast traffic to be flooded to all ports of the affected VLAN until the service recovers. Repeated exploitation could result in a prolonged loss of intended multicast forwarding behavior. |
| As part of Cisco's ongoing commitment to proactive security and product quality, the Cisco Secure Adaptive Security Appliance Software, Cisco Secure Firewall Threat Defense Software and Cisco Secure Firewall Management Center Software engineering team has conducted a comprehensive internal security review. This review resulted in a software hardening release that addresses multiple internally discovered vulnerabilities.
The vulnerabilities tracked by CVE-2026-20329 are related to issues concerning improper handling of exceptional conditions that are grouped under the Common Weakness Enumeration (CWE) Pillar CWE-703. |
| As part of Cisco's ongoing commitment to proactive security and product quality, the Cisco Nexus Dashboard engineering team has conducted a comprehensive internal security review. This review resulted in a software hardening release that addresses multiple internally discovered vulnerabilities.
The vulnerabilities tracked by CVE-2026-20322 are related to improper access control issues that are grouped under the Common Weakness Enumeration (CWE) CWE-284. |
| As part of Cisco's ongoing commitment to proactive security and product quality, the Cisco Secure Adaptive Security Appliance Software, Cisco Secure Firewall Threat Defense Software and Cisco Secure Firewall Management Center Software engineering team has conducted a comprehensive internal security review. This review resulted in a software hardening release that addresses multiple internally discovered vulnerabilities.
The vulnerabilities tracked by CVE-2026-20330 are related to improper neutralization issues that are grouped under the Common Weakness Enumeration (CWE) Pillar CWE-707. |
| A vulnerability in Cisco ISE could allow an authenticated, remote attacker to execute arbitrary commands on the underlying operating system of an affected device. To exploit this vulnerability, the attacker must have valid high-privileged administrative credentials.
This vulnerability is due to insecure deserialization of Java objects by the affected software. An attacker could exploit this vulnerability by sending a crafted serialized Java object to an affected device. A successful exploit could allow the attacker to obtain user-level access to the underlying operating system and then elevate privileges to root. In single-node deployments, successful exploitation of this vulnerability could cause the affected ISE node to become unavailable, resulting in a DoS condition. In that condition, endpoints that have not already authenticated would be unable to access the network until the node is restored. |
| As part of Cisco's ongoing commitment to proactive security and product quality, the Cisco Identity Services Engine (ISE) and Cisco ISE Passive Identity Connector (ISE-PIC), engineering teams have conducted a comprehensive internal security review. This review resulted in a software hardening release that addresses multiple internally discovered vulnerabilities.
The vulnerabilities tracked by CVE-2026-20194 are related to incorrect resource transfer between spheres that are grouped under the Common Weakness Enumeration (CWE) Pillar CWE-669. |
| As part of Cisco's ongoing commitment to proactive security and product quality, the Cisco Nexus Dashboard engineering team has conducted a comprehensive internal security review. This review resulted in a software hardening release that addresses multiple internally discovered vulnerabilities.
The vulnerabilities tracked by CVE-2026-20325 are related to improper neutralization of special elements used in a command issue that are grouped under the Common Weakness Enumeration (CWE) CWE-77. |
| A vulnerability in the sftunnel inter-device communication protocol of Cisco Secure Firewall Management Center (FMC) Software could allow an authenticated, remote attacker to execute arbitrary commands as root.
This vulnerability exists because a registered sftunnel peer has incorrect permissions to write an arbitrary file to any location on the device. An attacker could exploit this vulnerability by hijacking the sftunnel communication connection or being a valid registered sftunnel peer and sending an sftunnel command to write a malicious file to the disk of an affected device. A successful exploit could allow the attacker to write a file to the device that is executed with root privileges. To exploit this vulnerability, the attacker must have valid user credentials on the affected device. |
| As part of Cisco's ongoing commitment to proactive security and product quality, the Cisco Identity Services Engine (ISE) and Cisco ISE Passive Identity Connector (ISE-PIC) engineering teams have conducted a comprehensive internal security review. This review resulted in a software hardening release that addresses multiple internally discovered vulnerabilities.
The vulnerabilities tracked by CVE-2026-20192 are related to improper access control issues that are grouped under the Common Weakness Enumeration (CWE) Pillar CWE-284. |
| As part of Cisco's ongoing commitment to proactive security and product quality, the Cisco Nexus Dashboard engineering team has conducted a comprehensive internal security review. This review resulted in a software hardening release that addresses multiple internally discovered vulnerabilities.
The vulnerabilities tracked by CVE-2026-20361 are related to SQL injection issues that are grouped under the Common Weakness Enumeration (CWE) CWE-89. |
| As part of Cisco's ongoing commitment to proactive security and product quality, the Cisco Identity Services Engine (ISE) and Cisco ISE Passive Identity Connector (ISE-PIC), engineering teams have conducted a comprehensive internal security review. This review resulted in a software hardening release that addresses multiple internally discovered vulnerabilities.
The vulnerabilities tracked by CVE-2026-20130 are related to improper neutralization of special elements issues that are grouped under the Common Weakness Enumeration (CWE) Pillar CWE-74. |
| A vulnerability in the REST API of Cisco ISE and Cisco ISE-PIC could allow an unauthenticated, remote attacker to gain administrative access to an affected device.
This vulnerability is due to the REST API web service being exposed with insufficient authorization checks. An attacker could exploit this vulnerability by sending a crafted HTTP request to the exposed REST API port. A successful exploit could allow the attacker to read and modify ISE configuration and identity data with administrative privileges. |
| As part of Cisco's ongoing commitment to proactive security and product quality, the Cisco Identity Services Engine (ISE) and Cisco ISE Passive Identity Connector (ISE-PIC), engineering teams have conducted a comprehensive internal security review. This review resulted in a software hardening release that addresses multiple internally discovered vulnerabilities.
The vulnerabilities tracked by CVE-2026-20237 are related to improper input validation issues that are grouped under the Common Weakness Enumeration (CWE) Pillar CWE-20. |
| A vulnerability in the External Database Access feature of Cisco Secure Firewall Management Center (FMC) Software could allow an unauthenticated, remote attacker to execute arbitrary commands as root on an affected device.
This vulnerability is due to insecure deserialization of a user-supplied Java byte stream from a host that is configured in the external database access list. An attacker could exploit this vulnerability by sending a crafted, serialized Java byte stream to a specific TCP port of an affected device. A successful exploit could allow the attacker to execute arbitrary commands on the device and elevate privileges to root.
Notes:
This vulnerability can be exploited only by an attacker who has control of a host in the external database access list.
If the FMC management interface does not have public internet access, the attack surface that is associated with this vulnerability is reduced. |
| A vulnerability in the sftunnel inter-device communication protocol of Cisco Secure FMC Software could allow an authenticated, remote attacker to obtain root privileges.
This vulnerability is due to unsecured deserialization of untrusted data over the sftunnel management connection. An attacker could exploit this vulnerability by sending crafted sftunnel remote procedure calls (RPCs). A successful exploit could allow the attacker to gain root privileges on a device that is running Cisco Secure FMC Software and its high-availability peer.
To exploit this vulnerability, the attacker must have valid administrative credentials on a managed Cisco FTD device. |
