| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| RabbitMQ is a messaging and streaming broker. Prior to versions 3.13.15, 4.0.20, 4.1.11, 4.2.6, and 4.3.0, The cowboy WebSocket options at line 117 set compress => true, enabling RFC 7692 permessage-deflate negotiation. The handler does not set max_frame_size, so cowboy's default of infinity applies. cowlib's cow_ws:parse_payload/9 calls zlib:inflate/2 on the compressed payload with no output-size limit. An attacker can negotiate permessage-deflate during the WebSocket upgrade and send a frame containing a zlib bomb (e.g. 50 KB → 5 GB). Decompression occurs in the connection process before websocket_handle/2 ever sees the MQTT bytes. An unauthenticated attacker can crash a RabbitMQ node running the Web-MQTT plugin by sending a single highly-compressed WebSocket frame (a few KB on the wire) that inflates to gigabytes in memory. The cowboy WebSocket handler decompresses the entire frame before the MQTT CONNECT packet is processed, so no credentials are required. Preconditions include rabbitmq_web_mqtt plugin enabled (not default, but common for browser clients) Network reachability to port 15675/15676 No authentication required. This issue is fixed in versions 3.13.15, 4.0.20, 4.1.11, 4.2.6, and 4.3.0. |
| RabbitMQ is a messaging and streaming broker. Prior to versions 3.13.15, 4.0.20, 4.1.11, 4.2.6, and 4.3.1, The trace consumer constructs the output path as filename:join(TraceDir, Name ++ ".log") where Name comes from PUT /api/traces/:vhost/:name. No safe_relative_path / traversal check is applied on the write side, while the read side (rabbit_tracing_files.erl) does call rabbit_misc:safe_relative_path/1 , proving the omission is an oversight, not design. The .log suffix is forced and the endpoint requires administrator. A user with the administrator tag can write a .log-suffixed file to an arbitrary filesystem path writable by the rabbitmq user via the tracing plugin's name parameter, e.g. /etc/cron.d/x.log (if writable) or overwrite existing .log files outside the trace directory. Preconditions include rabbitmq_tracing plugin enabled administrator tag Target path writable by rabbitmq OS user. This issue is fixed in versions 3.13.15, 4.0.20, 4.1.11, 4.2.6, and 4.3.1. |
| RabbitMQ is a messaging and streaming broker. Prior to versions 4.1.11, 4.2.6, and 4.3.0, validate_partitions only checks that the requested partition count is at least 1, with no upper bound. A large count such as lists:seq(0, 500000000) allocates roughly 8GB. Preconditions include The rabbitmq_stream_management plugin must be enabled. The caller needs the management tag and access to the target vhost.. This issue is fixed in versions 4.1.11, 4.2.6, and 4.3.0. |
| RabbitMQ is a messaging and streaming broker. Prior to versions 3.13.15, 4.0.20, 4.1.11, 4.2.6, and 4.3.0, ?LOG_DEBUG("shutting down Shovel '~ts', ... Shovel state: ~tp", [Name, State]) formats the entire state map. The 'uris' field holds plaintext URIs after credentials_obfuscation:decrypt (called in rabbit_shovel_util:deobfuscated_uris/2). No format_status/1,2 callback exists in rabbit_shovel_worker to redact it. Triggered when an autodelete shovel (src-delete-after = N) completes. With DEBUG logging enabled, autodelete-shovel completion writes the full shovel state map , including decrypted amqp://user:password@host/ URIs , to the broker log file. Preconditions include Shovel plugin enabled with URI-embedded credentials DEBUG log level (non-default) Autodelete shovel configuration Attacker has log read access. This issue is fixed in versions 3.13.15, 4.0.20, 4.1.11, 4.2.6, and 4.3.0. |
| IBM DataStage on Cloud Pak for Data 5.4.0.0 could allow a remote authenticated attacker to execute arbitrary code due to improper neutralization of special elements used in an OS command. |
| A flaw was found in multicluster-global-hub. The manager component improperly validates the source identity of incoming CloudEvents on Kafka status topics. A remote attacker, after compromising a managed hub and obtaining its Kafka client certificate, can manipulate the self-asserted source identity. This allows the attacker to falsify or delete critical data, such as compliance, inventory, and cluster health information, belonging to other hubs in the database. |
| A flaw was found in the multicloud-operators-subscription component. This vulnerability allows a user on a managed cluster to escalate their privileges by creating a Subscription with specific, crafted annotations. Successful exploitation grants the attacker the ability to deploy resources into any namespace with the elevated permissions of the controller's Service Account, potentially leading to unauthorized access and control over cluster resources. |
| Mongoid does not restrict which query operators may come from caller-supplied filter data when an application hands that data to its query-building methods. In an application that forwards externally supplied filter parameters in this way, a party with no credentials may influence how the database evaluates the query. This may result in unintended disclosure of stored field values and in reduced database performance. |
| An inefficient regular expression complexity issue in the in-memory query evaluation component of the Mongoid library may allow an unauthenticated party to cause excessive processing within an embedding application process. Applications that place user-supplied text into a pattern-matching query condition on an embedded association may become unresponsive. |
| Mongoid contains an unsafe reflection weakness in the query path used for embedded documents. An application that passes an externally supplied field name to certain in-memory query methods may allow an unauthenticated party to obtain unintended disclosure of stored document data and to permanently remove stored records. |
| In the Linux kernel, the following vulnerability has been resolved:
thunderbolt: Release request if tb_cfg_request() fails in __tb_xdomain_response()
If tb_cfg_request() fails setting up the request (for example the
control channel is shut down already) it returns an error without
calling the callback. To avoid leaking that memory, call
tb_cfg_request_put() if tb_cfg_request() fails. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu/userq: pin mqd and fw object bo to avoid eviction
mqd and fw objects are queue core objects which should remain
valid and never be unmapped and evicted for user queues to work
properly.
During eviction if these buffers are evicted the hw continue to
use the invalid addresses and caused page faults and system hung. |
| NanoSVG 239e102ec contains an incorrect numeric conversion vulnerability in nsvg__curveDivs() during SVG stroke rasterization. A specially crafted SVG document containing an extremely large stroke-width can cause floating-point rounding to produce a zero subdivision angle. The subsequent arc division yields infinity, which is converted to int without range validation, resulting in undefined behavior and process termination, leading to denial of service. |
| In the Linux kernel, the following vulnerability has been resolved:
bfs: handle set_blocksize failures
bfs uses buffer_heads, which don't handle block size > PAGE_SIZE well.
Without this, mounting will hit the
BUG_ON(offset >= folio_size(folio));
in folio_set_bh on the first __bread_gfp call. |
| In the Linux kernel, the following vulnerability has been resolved:
thermal/drivers/tegra/soctherma: Switch to devm cooling device registration
Use devm_thermal_of_cooling_device_register() to simplify resource
management and avoid manual cleanup in error paths.
As a side effect this change has the benefit of solving an existing
issue. Before, the function tegra_soctherm_remove() only called
debugfs_remove_recursive() and never called thermal_cooling_device_unregister()
for any of the cooling devices registered here.
After the driver removal, the thermal framework's cdev list would
still hold references to thermal_cooling_device objects whose devdata
pointer (ts) pointed to memory already freed by the platform device's
devm cleanup.
With this change, the cooling device is unregistered when the driver
is removed, thus fixing the issue above. |
| In the Linux kernel, the following vulnerability has been resolved:
fs/ntfs3: preserve non-DOS attribute bits in system.dos_attrib
[BUG]
A corrupted ntfs3 image can hit a NULL function pointer call in
generic_perform_write() after toggling system.ntfs_attrib and then
overwriting system.dos_attrib on the same file.
BUG: kernel NULL pointer dereference, address: 0000000000000000
\#PF: supervisor instruction fetch in kernel mode
\#PF: error_code(0x0010) - not-present page
PGD bed5067 P4D bed5067 PUD 0
Oops: Oops: 0010 [#1] SMP KASAN NOPTI
RIP: 0010:0x0
Code: Unable to access opcode bytes at 0xffffffffffffffd6.
RSP: 0018:ffff88801025f988 EFLAGS: 00010246
Call Trace:
generic_perform_write+0x409/0x8c0 mm/filemap.c:4255
__generic_file_write_iter+0x1bb/0x200 mm/filemap.c:4372
ntfs_file_write_iter+0xcd9/0x1c20 fs/ntfs3/file.c:1253
new_sync_write fs/read_write.c:593 [inline]
vfs_write+0x63b/0xf70 fs/read_write.c:686
ksys_write+0x133/0x250 fs/read_write.c:738
__do_sys_write fs/read_write.c:749 [inline]
__se_sys_write fs/read_write.c:746 [inline]
__x64_sys_write+0x77/0xc0 fs/read_write.c:746
...
[CAUSE]
system.ntfs_attrib updates ATTR_DATA flags via ni_new_attr_flags()
and switches i_mapping->a_ops to ntfs_aops_cmpr when
FILE_ATTRIBUTE_COMPRESSED is set. system.dos_attrib then overwrites
ni->std_fa from a one-byte DOS attribute value, clearing the compression
bit without updating ATTR_DATA or the mapping operations.
Old buffered writes use is_compressed(ni) to choose
__generic_file_write_iter(). That leaves generic_perform_write() calling
a NULL write_begin callback from ntfs_aops_cmpr.
[FIX]
Treat system.dos_attrib as a low-byte DOS attribute update and preserve the
existing non-DOS attribute bits in ni->std_fa. This keeps compressed and
sparse state consistent with ATTR_DATA and the mapping operations while
keeping the existing DOS attribute semantics intact. |
| In the Linux kernel, the following vulnerability has been resolved:
dpaa2-switch: fix handling of NAPI on the remove path
All the NAPI instances for a DPSW device are attached to the first
switch port's net_device but shared by all ports. The NAPI instances get
disabled only once the last port goes down.
This causes an issue on the .remove() path where each port is
unregistered and freed one at a time, causing the NAPI instances to be
deleted even though they are not disabled.
In order to avoid this, split up the unregister_netdev() calls from the
free_netdev() so that we make sure all ports go down before we attempt
a deletion of NAPI instances. Also, make the netif_napi_del() explicit
as it is on the .probe() path. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: iwlwifi: mvm: fix P2P-Device binding handling
Our binding handling for P2P-Device can run into the following
scenario, as observed by our testing:
- a station interface is connected on some channel
- the P2P-Device does a remain-on-channel (ROC) on that channel
- the ROC ends, and the P2P-Device is removed from the binding,
but the phy_ctxt pointer is left around as a PHY cache so we
don't need to recalibrate to the channel again and again in
case it's not shared
- a binding update by the station interface, even a removal,
will re-add the P2P-Device to the binding
- the P2P-Device is removed, which removes the PHY context, but
it's still in the binding so the firmware crashes
Since the P2P device is removed from the binding and only re-
added by unrelated code, but we want to keep the phy_ctxt around
as a cache for future ROC usage, fix it by adding a boolean that
indicates whether or not the P2P-Device should be added to the
binding, and handle that in the binding iterator. That way, the
station interface cannot re-add the P2P-Device to the binding
when that isn't active. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdkfd: fix SMI event cross-process information leak
kfd_smi_ev_enabled() skips the suser privilege check when pid=0.
PROCESS_START, PROCESS_END, and VMFAULT events are emitted with
pid=0 while carrying another process's PID and command name, so any
/dev/kfd user in the render group can monitor all GPU workloads.
Pass the target process PID into kfd_smi_event_add() for these events
so the existing per-client filter restricts delivery to the owning
process or CAP_SYS_ADMIN subscribers. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdkfd: Let driver decide buffer size at AMDKFD_IOC_GET_DMABUF_INFO ioctl
amdkfd driver needs allocate buffer to return bo metadata to user space. The
buffer size is controlled by user currently. It is a potential security issue
that hostile value (e.g. 2 GiB) lets any render-group user trigger order-MAX
allocation/OOM in kernel context.
This patch first finds bo metadata size. If the size is smaller than user
provided value drive can safely allocate buffer in kernel space and copy to
user space buffer. If not, driver will let user know, not allocate and copy.
User will redo with new buffer in user space.
This patch lets driver decide buffer allocation size to avoid potential hostile
size from user space.
(cherry picked from commit f54ce9e8cbd3abe0eda3a285f54dc4f572fe589a) |
