| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
liveupdate: Remember FLB retrieve() status
LUO keeps track of successful retrieve attempts on an FLB. It does so
to avoid multiple retrievals of the same FLB. Multiple retrievals cause
problems because once the FLB is retrieved, the serialized data
structures are likely freed and the FLB is likely in a very different
state from what the code expects.
All this works well when retrieve succeeds. When it fails,
luo_flb_retrieve_one() returns the error immediately, without ever
storing anywhere that a retrieve was attempted or what its error code
was. If the user attempts to retrieve another file registered with the
same FLB, LUO will attempt to call the FLB's retrieve() callback again.
The retry is problematic for much of the same reasons listed above. The
FLB is likely in a very different state than what the retrieve logic
normally expects (e.g. some KHO pages may have already been restored and
freed).
There is no sane way of attempting the retrieve again. Remember the
error retrieve returned and directly return it on a retry.
This is done by changing the retrieved bool to a retrieve_status
integer. A value of 0 means retrieve was never attempted, a positive
value means it succeeded, and a negative value means it failed and the
error code is the value.
This is similar to commit f85b1c6af5bc ("liveupdate: luo_file: remember
retrieve() status") which did the same for LUO files. |
| In the Linux kernel, the following vulnerability has been resolved:
pinctrl: mediatek: use devm_gpiochip_add_data() for GPIO chip
The gpio_chip is allocated with device-managed memory but registered with
the non-managed gpiochip_add_data(). This was harmless while the drivers
were built-in, but once they can be built as modules and unbound/rmmod'd,
devm frees the gpio_chip's memory while it is still registered, causing a
use-after-free.
Register it with devm_gpiochip_add_data() so it shares the same
device-managed lifecycle, which also lets the manual gpiochip_remove()
error paths go away. |
| In the Linux kernel, the following vulnerability has been resolved:
pinctrl: mediatek: free EINT resources on unbind
mtk_eint_do_init() creates an IRQ domain, populates it with a mapping for
every EINT line and installs a chained handler on the parent interrupt,
but none of these are ever released. This was harmless while the drivers
were built-in, but now that they can be built as modules and
unbound/rmmod'd it leaves behind a dangling IRQ domain, interrupt mappings
whose chip data points at freed memory, and a chained handler that keeps
firing into that freed data.
The plain allocations in mtk_eint_do_init() already use the device-managed
devm_*() helpers, so tear the remaining resources down the same way:
register a devm action that detaches the chained handler, waits for any
in-flight handler to finish, disposes of the per-line mappings and removes
the IRQ domain. This mirrors the device-managed lifecycle adopted for the
GPIO chip and keeps the whole EINT setup self-cleaning on unbind. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: ufs: core: Validate string descriptors
The string descriptor length includes a two-byte header while the UTF-16
payload starts after it. utf16s_to_utf8s() expects a count of UTF-16 code
units, not bytes. Passing the payload byte count can make it read beyond
the descriptor buffer.
Validate that the payload has an even byte count, pass a code-unit count to
the converter, and allocate sufficient UTF-8 output space.
The raw string buffer starts after the descriptor header but its size is
bLength. Copying bLength bytes from that pointer can read beyond the
response buffer.
Allocate a zeroed bLength-sized buffer and copy only the UTF-16
payload. This preserves the raw buffer size consumed by the RPMB device-ID
ABI while avoiding the overread. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: ufs: Avoid NULL CQE dereference when reporting invalid tags
The single-doorbell completion path can call ufshcd_compl_one_cqe() with a
NULL CQE. If no command is associated with the completion tag, the warning
message dereferences the CQE while reporting the error. Avoid that
dereference and include the invalid tag in the warning. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: ufs: core: Validate connected lane counts
The connected lane count is used by TX equalization code to index arrays
sized by UFS_MAX_LANES. Reject zero and out-of-range RX or TX lane counts
before they can be propagated. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: ufs: debugfs: Reserve space for a string terminator
ufs_saved_err_write() copies user input into a zero-initialized stack
buffer and passes it to kstrtoint(). A write that fills the entire buffer
overwrites its only terminator.
Reject an input whose length leaves no room for the trailing NUL. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: keembay - Initialize completion before requesting IRQ
kmb_ocs_aes_probe() requests the device IRQ before initializing
irq_completion. Once the handler is registered it can run immediately,
and ocs_aes_irq_handler() unconditionally calls complete(). An
interrupt in this window would therefore use an uninitialized
completion.
Initialize the completion before requesting the IRQ, as the sibling
OCS HCU and ECC drivers already do. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/mlx5: Fix integer overflow of user QP buffer size
set_user_buf_size() computes the QP buffer size by left-shifting the
user-supplied rq.wqe_cnt and rq.wqe_shift values as signed integers.
A sufficiently large rq.wqe_cnt causes signed integer overflow, which
is undefined behavior, and yields a small or negative buf_size, causing
ib_umem_get() to map a buffer smaller than the hardware will actually
write into.
Replace the shifts and addition with check_shl_overflow() and
check_add_overflow(), rejecting invalid user inputs.
Moreover, guard the identical shift computing qp->sq.offset in
_create_user_qp() before set_user_buf_size() is reached. |
| In the Linux kernel, the following vulnerability has been resolved:
isofs: release zisofs block pointer buffer head
zisofs_fill_pages() reads the compressed block pointer table. The error
paths release the current buffer_head, the loop also releases the old
buffer_head when it advances. However, the success path leaves the last
buffer_head referenced. Release it before returning success. |
| In the Linux kernel, the following vulnerability has been resolved:
spi: oc-tiny: switch to managed controller allocation
The controller is allocated with the non-managed spi_alloc_host() while
the interrupt is registered with devm_request_irq(). During removal,
spi_bitbang_stop() only unregisters the controller; the subsequent
spi_controller_put() then frees the controller together with its
embedded driver-private devdata, which is the IRQ handler's dev_id. The
devm_request_irq() release action (free_irq()), which drains the
handler, does not run until after .remove() returns. A late or latched
interrupt can therefore reach tiny_spi_irq() and dereference
already-freed memory (e.g. hw->base).
Switch to devm_spi_alloc_host() so that the devres LIFO order releases
the controller only after free_irq() has drained the handler, and drop
the now-redundant spi_controller_put() from .remove(). The probe error
path is simplified to direct returns.
This issue was found by an in-house static analysis tool. |
| In the Linux kernel, the following vulnerability has been resolved:
sched_ext: Abort directly from the hardlockup handler
scx_hardlockup() defers the abort to an irq_work because exit claiming used
to take scx_sched_lock and couldn't run from NMI. The deferral is now
unnecessary - claiming is NMI-safe and asserting ->aborting is exactly what
breaks the live-locks that hard-lock CPUs. Call handle_lockup() directly and
drop the irq_work. This also makes the self-detected case recoverable: the
perf watchdog fires on the hard-locked CPU itself, where a queued irq_work
never runs with IRQs off.
Also fix the return value: %true used to be returned whenever sched_ext was
loaded, suppressing the kernel's hardlockup report even when the abort was
refused. Return %true only when this call initiated the abort. |
| In the Linux kernel, the following vulnerability has been resolved:
remoteproc: Prevent crash handling to race with rproc_del()
There's no synchronization between rproc_crash_handler_work() and
rproc_del(), as such it's possible for a driver to be removed while
crash-handler work is scheduled, or even executing - resulting in
use-after-free issues.
To avoid this the scheduled work need to be cancelled and synchronized
against before the removal proceeds.
In order to ensure that this doesn't race with the reporting, and
thereby scheduling new work, a "deleting" flag is introduced. This is
similar to the RPROC_DELETE state that was introduced to ensure that
"start" didn't race with rproc_del(), but the existing mechanism can not
be used as it's valid to call rproc_report_crash() in atomic context -
and the "state" is protected by a mutex.
In the event that work is cancelled the pm_stay_awake() is left
unbalanced and need to be unrolled.
The blocking and cancelling of crash-handler work prior to the actual
rproc_shutdown() call does have the explicit side-effect that crashes
resulting from the shutdown process will not enter the crash-handling
path, and as such will not generate devcoredumps etc. Due to the
existing mutual exclusion between these code paths there's no concrete
reduction in functionality, but further work would be needed to handle
this case. |
| In the Linux kernel, the following vulnerability has been resolved:
iommu/tegra241-cmdqv: Publish an LVCMDQ only after it is fully initialized
tegra241_vintf_init_lvcmdq() stores the freshly allocated vcmdq pointer to
the vintf->lvcmdqs[] array, before tegra241_vcmdq_alloc_smmu_cmdq() builds
the vcmdq->cmdq. The error ISR dereferences that cmdq, so a latched LVCMDQ
error (e.g. one inherited across a kexec) firing in this window would make
tegra241_vintf0_handle_error() pass the still-zeroed arm_smmu_cmdq down to
__arm_smmu_cmdq_skip_err(), dereferencing NULL queue register pointers.
Drop the store from tegra241_vintf_init_lvcmdq() and publish the vcmdq at
the end of the allocation instead, with an smp_store_release() that pairs
with an smp_load_acquire() in the ISR, which can see a fully built LVCMDQ
or NULL.
The user-owned LVCMDQ allocation moves accordingly, publishing the vcmdq
once tegra241_vcmdq_hw_init_user() succeeds, using a plain store since a
user VINTF's lvcmdqs[] has no lockless reader -- the error ISR only walks
the VINTF0 array. |
| In the Linux kernel, the following vulnerability has been resolved:
iommu/tegra241-cmdqv: Synchronize the error ISR against VINTF (de)init
A user VINTF is torn down by tegra241_cmdqv_deinit_vintf(), which runs from
the destroy callback and from the init-failure unwind in the alloc handler.
It clears the cmdqv->vintfs[] slot and lets the iommufd core free it, but
nothing serializes that against the error interrupt: tegra241_cmdqv_isr()
reads cmdqv->vintfs[idx] and dereferences the vintf. A concurrent error can
make the ISR read a slot mid-clear (a NULL deref) or use a vintf which is
about to be freed (a use-after-free).
deinit_vintf() also returns idx to the IDA before clearing the slot, so a
concurrent create that reuses idx can publish its new vintf into the slot,
only for this teardown to erase it again with the stale NULL store.
On the other end, tegra241_cmdqv_init_vintf() publishes a new vintf with a
plain store to the cmdqv->vintfs[] slot, and the ISR dereferences fields of
a published vintf such as vintf->base. A plain store gives no ordering on a
weakly-ordered CPU, and a stale VINTF_ERR_MAP bit on a reused idx can make
the ISR pick a vintf the moment it is published, before its fields are set
or tegra241_vintf_hw_init() runs.
The cmdqv->vintfs[0] slot stays NULL until tegra241_cmdqv_init_structures()
first creates VINTF0, so the slot 0 read needs the same NULL check.
Publish every slot with an smp_store_release(), and read each slot in the
ISR with an smp_load_acquire() under a NULL check, so the ISR always sees
a fully built vintf or NULL. Also make deinit_vintf() clear the slot, and
synchronize_irq() prior to returning idx to the IDA, so no vintf is freed
under a running handler and no reused idx is clobbered. |
| In the Linux kernel, the following vulnerability has been resolved:
iommu/tegra241-cmdqv: Don't run the error ISR before probe sets up vintfs
__tegra241_cmdqv_probe() requests the error IRQ before it has allocated the
cmdqv->vintfs array and set cmdqv->num_vintfs. A CMDQV left enabled with a
latched error across a kexec fires the IRQ as soon as it is requested, and
tegra241_cmdqv_isr() then walks the uninitialized cmdqv->vintfs array.
Request the IRQ only after cmdqv->vintfs is allocated and zeroed, so that
a latched interrupt firing early runs the ISR against a valid array of NULL
slots that it safely skips. |
| In the Linux kernel, the following vulnerability has been resolved:
iommu/tegra241-cmdqv: Don't fall back to a freed smmu after devm_krealloc()
__tegra241_cmdqv_probe() uses devm_krealloc() to grow @smmu into the larger
tegra241_cmdqv, which frees the original @smmu once it relocates. A failure
after that returned NULL, and the caller then dereferenced the freed @smmu
on its fallback path.
Return an int and take @smmu by reference instead, then update *smmu to the
reallocated pointer after devm_krealloc() succeeds, so the caller and its
fallback path both use the live @smmu rather than the freed original. |
| In the Linux kernel, the following vulnerability has been resolved:
iommu/tegra241-cmdqv: Free the error IRQ before tearing down VINTFs
tegra241_cmdqv_remove() tears each VINTF down first, then calls free_irq().
Tearing a VINTF down frees vintf0 and clears cmdqv->vintfs[0]. An error in
that window makes tegra241_cmdqv_isr() read the stale slot and hand it to
tegra241_vintf0_handle_error(), which dereferences a NULL or freed pointer.
Free the IRQ before tearing the VINTFs down. free_irq() waits for in-flight
handlers to finish and blocks new ones, so no ISR can observe a VINTF as it
is torn down.
Note: a user-owned VINTF (viommu) could outlive this teardown, which unmaps
cmdqv->base and frees cmdqv->vintfs, so a later viommu close then touches
freed memory. This is neither introduced nor fixed here: a physical IOMMU
is not a pluggable device, so iommufd by design holds no reference on the
one behind a viommu, and this teardown is not expected while that viommu is
still alive. |
| In the Linux kernel, the following vulnerability has been resolved:
iommu/tegra241-cmdqv: Require exactly one Stream ID for a vSID
tegra241_vintf_init_vsid() maps a guest vSID to a single physical Stream ID
taken from master->streams[0], and only warns when the device does not have
exactly one stream. A device with several streams gets only its first one
mapped, so a guest vSID invalidation cannot reach the others' ATC and IOTLB
entries; a device with none makes master->streams a ZERO_SIZE_PTR, read out
of bounds.
Reject the mapping with -EOPNOTSUPP if master->num_streams is not one. |
| In the Linux kernel, the following vulnerability has been resolved:
iommu/tegra241-cmdqv: Fix VINTF0 leak on the init-failure path
tegra241_cmdqv_init_structures() allocates VINTF0 with kzalloc_obj(), inits
it, and preallocates its logical VCMDQs. Two of its error paths leak.
When tegra241_cmdqv_init_vintf() fails it returns before VINTF0 reaches the
cmdqv->vintfs[] array, so the devres unwind on probe failure cannot reach
it; free it directly there.
A later VCMDQ preallocation failure instead leaves VINTF0 published, and so
this time the unwind does reach tegra241_cmdqv_remove_vintf(), which then
frees it from vintf->hyp_own. But tegra241_vintf_hw_init() sets that flag
only afterward, from a HW read-back, so the still-uninited VINTF0 reads as
guest-owned and leaks, with mutex_destroy() and ida_destroy() run on fields
it never set up.
Decide ownership from vintf->idx instead, the index assigned when its id is
allocated: idx 0 is the kernel-owned VINTF0, while idx >= 1 marks a guest
VINTF. So the in-kernel free decision in tegra241_cmdqv_remove_vintf() and
tegra241_vintf_free_lvcmdq() now keys on idx too, and hyp_own stays a pure
HW-readback state. |
