| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| An issue was discovered on Alecto IVM-100 2019-11-12 devices. The device comes with a serial interface at the board level. By attaching to this serial interface and rebooting the device, a large amount of information is disclosed. This includes the view password and the password of the Wi-Fi access point that the device used. |
| IBM Operations Analytics – Log Analysis versions 1.3.5.0 through 1.3.8.3 and IBM SmartCloud Analytics – Log Analysis are vulnerable to a cross-site request forgery (CSRF) vulnerability that could allow an attacker to trick a trusted user into performing unauthorized actions. |
| Synaccess netBooter NP-0801DU 7.4 contains a cross-site request forgery vulnerability that allows attackers to perform administrative actions without proper request validation. Attackers can craft malicious web pages with hidden form submissions to add admin users by tricking authenticated administrators into loading a malicious page. |
| EDK2 contains a vulnerability in the HashPeImageByType(). A user may cause a read out of bounds when a corrupted data pointer and length are sent via an adjecent network. A successful exploit of this vulnerability may lead to a loss of Integrity and/or Availability. |
| The filepath.Walk and filepath.WalkDir functions are documented as not following symbolic links, but both functions are susceptible to a TOCTOU (time of check/time of use) race condition where a portion of the path being walked is replaced with a symbolic link while the walk is in progress. |
| A vulnerability, which was classified as problematic, was found in TechPowerUp GPU-Z 2.23.0. Affected is the function sub_140001880 in the library GPU-Z.sys of the component 0x8000645C IOCTL Handler. The manipulation leads to memory leak. It is possible to launch the attack on the local host. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| Quectel EC25-EUX EC25EUXGAR08A05M1G was discovered to contain a stack overflow. |
| In Xpdf 4.05 (and earlier), a PDF object loop in a CMap, via the "UseCMap" entry, leads to infinite recursion and a stack overflow. |
| The uyuni-server-attestation systemd service needs a database_password environment variable. This file has 640 permission, and cannot be shown users, but the environment is still exposed by systemd to non-privileged users. |
| Improper Privilege Management vulnerability in ZTE GoldenDB allows Privilege Escalation.This issue affects GoldenDB: from 6.1.03 through 6.1.03.05. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: brcmfmac: fix crash while sending Action Frames in standalone AP Mode
Currently, whenever there is a need to transmit an Action frame,
the brcmfmac driver always uses the P2P vif to send the "actframe" IOVAR to
firmware. The P2P interfaces were available when wpa_supplicant is managing
the wlan interface.
However, the P2P interfaces are not created/initialized when only hostapd
is managing the wlan interface. And if hostapd receives an ANQP Query REQ
Action frame even from an un-associated STA, the brcmfmac driver tries
to use an uninitialized P2P vif pointer for sending the IOVAR to firmware.
This NULL pointer dereferencing triggers a driver crash.
[ 1417.074538] Unable to handle kernel NULL pointer dereference at virtual
address 0000000000000000
[...]
[ 1417.075188] Hardware name: Raspberry Pi 4 Model B Rev 1.5 (DT)
[...]
[ 1417.075653] Call trace:
[ 1417.075662] brcmf_p2p_send_action_frame+0x23c/0xc58 [brcmfmac]
[ 1417.075738] brcmf_cfg80211_mgmt_tx+0x304/0x5c0 [brcmfmac]
[ 1417.075810] cfg80211_mlme_mgmt_tx+0x1b0/0x428 [cfg80211]
[ 1417.076067] nl80211_tx_mgmt+0x238/0x388 [cfg80211]
[ 1417.076281] genl_family_rcv_msg_doit+0xe0/0x158
[ 1417.076302] genl_rcv_msg+0x220/0x2a0
[ 1417.076317] netlink_rcv_skb+0x68/0x140
[ 1417.076330] genl_rcv+0x40/0x60
[ 1417.076343] netlink_unicast+0x330/0x3b8
[ 1417.076357] netlink_sendmsg+0x19c/0x3f8
[ 1417.076370] __sock_sendmsg+0x64/0xc0
[ 1417.076391] ____sys_sendmsg+0x268/0x2a0
[ 1417.076408] ___sys_sendmsg+0xb8/0x118
[ 1417.076427] __sys_sendmsg+0x90/0xf8
[ 1417.076445] __arm64_sys_sendmsg+0x2c/0x40
[ 1417.076465] invoke_syscall+0x50/0x120
[ 1417.076486] el0_svc_common.constprop.0+0x48/0xf0
[ 1417.076506] do_el0_svc+0x24/0x38
[ 1417.076525] el0_svc+0x30/0x100
[ 1417.076548] el0t_64_sync_handler+0x100/0x130
[ 1417.076569] el0t_64_sync+0x190/0x198
[ 1417.076589] Code: f9401e80 aa1603e2 f9403be1 5280e483 (f9400000)
Fix this, by always using the vif corresponding to the wdev on which the
Action frame Transmission request was initiated by the userspace. This way,
even if P2P vif is not available, the IOVAR is sent to firmware on AP vif
and the ANQP Query RESP Action frame is transmitted without crashing the
driver.
Move init_completion() for "send_af_done" from brcmf_p2p_create_p2pdev()
to brcmf_p2p_attach(). Because the former function would not get executed
when only hostapd is managing wlan interface, and it is not safe to do
reinit_completion() later in brcmf_p2p_tx_action_frame(), without any prior
init_completion().
And in the brcmf_p2p_tx_action_frame() function, the condition check for
P2P Presence response frame is not needed, since the wpa_supplicant is
properly sending the P2P Presense Response frame on the P2P-GO vif instead
of the P2P-Device vif.
[Cc stable] |
| Heatmiser Netmonitor 3.03 contains a hardcoded credentials vulnerability in the networkSetup.htm page with predictable admin login credentials. Attackers can access the device by using the hard-coded username 'admin' and password 'admin' in the hidden form input fields. |
| DLL Search Order Hijacking vulnerability potentially allowed an attacker with administrator privileges to load a malicious dynamic-link library and execute its code. |
| Bluetooth HCI Adaptor from Realtek has a Link Following vulnerability. Local attackers with regular privileges can create a symbolic link with the same name as a specific file, causing the product to delete arbitrary files pointed to by the link. Subsequently, attackers can leverage arbitrary file deletion to privilege escalation. |
| A security vulnerability has been detected in Shazwazza Smidge up to 4.5.1. The impacted element is an unknown function of the component Bundle Handler. The manipulation of the argument Version leads to path traversal. Remote exploitation of the attack is possible. Upgrading to version 4.6.0 is sufficient to resolve this issue. It is recommended to upgrade the affected component. |
| OpenPLC_V3 is vulnerable to a cross-site request forgery (CSRF) attack
due to the absence of proper CSRF validation. This issue allows an
unauthenticated attacker to trick a logged-in administrator into
visiting a maliciously crafted link, potentially enabling unauthorized
modification of PLC settings or the upload of malicious programs which
could lead to significant disruption or damage to connected systems. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdkfd: Fix memory leak in kfd_mem_dmamap_userptr()
If the number of pages from the userptr BO differs from the SG BO then the
allocated memory for the SG table doesn't get freed before returning
-EINVAL, which may lead to a memory leak in some error paths. Fix this by
checking the number of pages before allocating memory for the SG table. |
| In BootRom, there's a possible unchecked command index. This could lead to local escalation of privilege with no additional execution privileges needed. |
| In BootROM, there is a missing size check for RSA keys in Certificate Type 0 validation. This could lead to memory buffer overflow without requiring additional execution privileges. |
| Remote Code Execution vulnerabilities are present in ASPECT if session administra-tor credentials become compromised.
This issue affects ASPECT-Enterprise: through 3.08.03; NEXUS Series: through 3.08.03; MATRIX Series: through 3.08.03. |
