| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A vulnerability in the TLS protocol implementation of legacy Cisco ASA 5500 Series (ASA 5505, 5510, 5520, 5540, and 5550) devices could allow an unauthenticated, remote attacker to access sensitive information, aka a Return of Bleichenbacher's Oracle Threat (ROBOT) attack. An attacker could iteratively query a server running a vulnerable TLS stack implementation to perform cryptanalytic operations that may allow decryption of previously captured TLS sessions. Cisco Bug IDs: CSCvg97652. |
| A vulnerability in the implementation of the direct authentication feature in Cisco Adaptive Security Appliance (ASA) Software could allow an unauthenticated, remote attacker to cause an affected device to unexpectedly reload, resulting in a denial of service (DoS) condition. The vulnerability is due to incomplete input validation of the HTTP header. An attacker could exploit this vulnerability by sending a crafted HTTP request to the local IP address of an affected device. A successful exploit could allow the attacker to cause the affected device to reload. This vulnerability affects Cisco Adaptive Security Appliance (ASA) Software that is running on the following Cisco products: ASA 5500 Series Adaptive Security Appliances, ASA 5500-X Series Next-Generation Firewalls, ASA Services Module for Cisco Catalyst 6500 Series Switches and Cisco 7600 Series Routers, ASA 1000V Cloud Firewall, Adaptive Security Virtual Appliance (ASAv), Firepower 4110 Security Appliance, Firepower 9300 ASA Security Module, ISA 3000 Industrial Security Appliance. Cisco Bug IDs: CSCvd59063. |
| Cisco IOS 12.0 through 15.6, Adaptive Security Appliance (ASA) Software 7.0.1 through 9.7.1.2, NX-OS 4.0 through 12.0, and IOS XE 3.6 through 3.18 are affected by a vulnerability involving the Open Shortest Path First (OSPF) Routing Protocol Link State Advertisement (LSA) database. This vulnerability could allow an unauthenticated, remote attacker to take full control of the OSPF Autonomous System (AS) domain routing table, allowing the attacker to intercept or black-hole traffic. The attacker could exploit this vulnerability by injecting crafted OSPF packets. Successful exploitation could cause the targeted router to flush its routing table and propagate the crafted OSPF LSA type 1 update throughout the OSPF AS domain. To exploit this vulnerability, an attacker must accurately determine certain parameters within the LSA database on the target router. This vulnerability can only be triggered by sending crafted unicast or multicast OSPF LSA type 1 packets. No other LSA type packets can trigger this vulnerability. OSPFv3 is not affected by this vulnerability. Fabric Shortest Path First (FSPF) protocol is not affected by this vulnerability. Cisco Bug IDs: CSCva74756, CSCve47393, CSCve47401. |
| A vulnerability in the web-based management interface of Cisco Adaptive Security Appliance (ASA) 9.1(6.11) and 9.4(1.2) could allow an unauthenticated, remote attacker to conduct a cross-site scripting (XSS) attack against a user of the web-based management interface of an affected device, aka WebVPN XSS. The vulnerability is due to insufficient validation of user-supplied input by the web-based management interface of an affected device. An attacker could exploit this vulnerability by persuading a user of the interface to click a crafted link. A successful exploit could allow the attacker to execute arbitrary script code in the context of the interface or allow the attacker to access sensitive browser-based information. Cisco Bug IDs: CSCve19179. |
| A vulnerability in the Border Gateway Protocol (BGP) Bidirectional Forwarding Detection (BFD) implementation of Cisco Adaptive Security Appliance (ASA) Software could allow an unauthenticated, remote attacker to bypass the access control list (ACL) for specific TCP and UDP traffic. More Information: CSCvc68229. Known Affected Releases: 9.6(2). Known Fixed Releases: 99.1(20.1) 99.1(10.2) 98.1(12.7) 98.1(1.49) 97.1(6.58) 97.1(0.134) 96.2(0.109) 9.7(1.1) 9.6(2.99) 9.6(2.8). |
| A vulnerability in the Internet Key Exchange Version 1 (IKEv1) XAUTH code of Cisco ASA Software could allow an authenticated, remote attacker to cause a reload of an affected system. The vulnerability is due to insufficient validation of the IKEv1 XAUTH parameters passed during an IKEv1 negotiation. An attacker could exploit this vulnerability by sending crafted parameters. Note: Only traffic directed to the affected system can be used to exploit this vulnerability. This vulnerability only affects systems configured in routed firewall mode and in single or multiple context mode. This vulnerability can be triggered by IPv4 or IPv6 traffic. A valid IKEv1 Phase 1 needs to be established to exploit this vulnerability, which means that an attacker would need to have knowledge of a pre-shared key or have a valid certificate for phase 1 authentication. This vulnerability affects Cisco ASA Software running on the following products: Cisco ASA 1000V Cloud Firewall, Cisco ASA 5500 Series Adaptive Security Appliances, Cisco ASA 5500-X Series Next-Generation Firewalls, Cisco ASA Services Module for Cisco Catalyst 6500 Series Switches and Cisco 7600 Series Routers, Cisco Adaptive Security Virtual Appliance (ASAv), Cisco ASA for Firepower 9300 Series, Cisco ISA 3000 Industrial Security Appliance. Fixed versions: 9.1(7.7) 9.2(4.11) 9.4(4) 9.5(3) 9.6(1.5). Cisco Bug IDs: CSCuz11685. |
| A vulnerability in the web interface of the Cisco Adaptive Security Appliance (ASA) 9.3(3) and 9.6(2) could allow an unauthenticated, remote attacker to determine valid usernames. The attacker could use this information to conduct additional reconnaissance attacks. The vulnerability is due to the interaction between Lightweight Directory Access Protocol (LDAP) and SSL Connection Profile when they are configured together. An attacker could exploit the vulnerability by performing a username enumeration attack to the IP address of the device. An exploit could allow the attacker to determine valid usernames. Cisco Bug IDs: CSCvd47888. |
| A vulnerability in the DNS code of Cisco ASA Software could allow an unauthenticated, remote attacker to cause an affected device to reload or corrupt the information present in the device's local DNS cache. The vulnerability is due to a flaw in handling crafted DNS response messages. An attacker could exploit this vulnerability by triggering a DNS request from the Cisco ASA Software and replying with a crafted response. A successful exploit could cause the device to reload, resulting in a denial of service (DoS) condition or corruption of the local DNS cache information. Note: Only traffic directed to the affected device can be used to exploit this vulnerability. This vulnerability affects Cisco ASA Software configured in routed or transparent firewall mode and single or multiple context mode. This vulnerability can be triggered by IPv4 and IPv6 traffic. This vulnerability affects Cisco ASA Software running on the following products: Cisco ASA 1000V Cloud Firewall, Cisco ASA 5500 Series Adaptive Security Appliances, Cisco ASA 5500-X Series Next-Generation Firewalls, Cisco ASA Services Module for Cisco Catalyst 6500 Series Switches and Cisco 7600 Series Routers, Cisco Adaptive Security Virtual Appliance (ASAv), Cisco Firepower 9300 ASA Security Module, Cisco ISA 3000 Industrial Security Appliance. Fixed versions: 9.1(7.12) 9.2(4.18) 9.4(3.12) 9.5(3.2) 9.6(2.2). Cisco Bug IDs: CSCvb40898. |
| A vulnerability in the IPsec code of Cisco ASA Software could allow an authenticated, remote attacker to cause a reload of the affected system. The vulnerability is due to improper parsing of malformed IPsec packets. An attacker could exploit this vulnerability by sending malformed IPsec packets to the affected system. Note: Only traffic directed to the affected system can be used to exploit this vulnerability. This vulnerability affects systems configured in routed firewall mode only and in single or multiple context mode. This vulnerability can be triggered by IPv4 and IPv6 traffic. An attacker needs to establish a valid IPsec tunnel before exploiting this vulnerability. This vulnerability affects Cisco ASA Software running on the following products: Cisco ASA 1000V Cloud Firewall, Cisco ASA 5500 Series Adaptive Security Appliances, Cisco ASA 5500-X Series Next-Generation Firewalls, Cisco ASA Services Module for Cisco Catalyst 6500 Series Switches and Cisco 7600 Series Routers, Cisco Adaptive Security Virtual Appliance (ASAv), Cisco Firepower 9300 ASA Security Module, Cisco ISA 3000 Industrial Security Appliance. Fixed versions: 9.1(7.8) 9.2(4.15) 9.4(4) 9.5(3.2) 9.6(2). Cisco Bug IDs: CSCun16158. |
| A vulnerability in the web-based management interface of Cisco Adaptive Security Appliance (ASA) 9.5(1) could allow an authenticated, remote attacker to conduct a cross-site scripting (XSS) attack against a user of the web-based management interface of an affected device. The vulnerability is due to insufficient validation of user-supplied input by the web-based management interface of an affected device. An attacker could exploit this vulnerability by persuading a user of the interface to click a crafted link. A successful exploit could allow the attacker to execute arbitrary script code in the context of the interface or allow the attacker to access sensitive browser-based information. Cisco Bug IDs: CSCvd82064. |
| A vulnerability in the local Certificate Authority (CA) feature of Cisco ASA Software before 9.6(1.5) could allow an unauthenticated, remote attacker to cause a reload of the affected system. The vulnerability is due to improper handling of crafted packets during the enrollment operation. An attacker could exploit this vulnerability by sending a crafted enrollment request to the affected system. An exploit could allow the attacker to cause the reload of the affected system. Note: Only HTTPS packets directed to the Cisco ASA interface, where the local CA is allowing user enrollment, can be used to trigger this vulnerability. This vulnerability affects systems configured in routed firewall mode and in single or multiple context mode. |
| Memory leak in the embedded web server in the WebVPN subsystem in Cisco Adaptive Security Appliance (ASA) Software allows remote attackers to cause a denial of service (memory consumption and SSL outage) via multiple crafted HTTP requests, aka Bug ID CSCue05458. |
| The SIP inspection engine in Cisco Adaptive Security Appliance (ASA) Software 8.2 before 8.2(5.48), 8.4 before 8.4(6.5), 9.0 before 9.0(3.1), and 9.1 before 9.1(2.5) allows remote attackers to cause a denial of service (memory consumption or device reload) via crafted SIP packets, aka Bug ID CSCuh44052. |
| The Clientless SSL VPN portal in Cisco ASA Software 8.2 before 8.2(5.51), 8.3 before 8.3(2.42), 8.4 before 8.4(7.23), 8.6 before 8.6(1.15), 9.0 before 9.0(4.24), 9.1 before 9.1(5.12), 9.2 before 9.2(2.8), and 9.3 before 9.3(1.1) allows remote attackers to obtain sensitive information from process memory or modify memory contents via crafted parameters, aka Bug ID CSCuq29136. |
| Cisco Adaptive Security Appliance (ASA) software 7.2 and 8.2 before 8.2(5.58), 8.3 and 8.4 before 8.4(7.29), 8.5 through 8.7 before 8.7(1.17), 9.0 before 9.0(4.37), 9.1 before 9.1(6.6), 9.2 before 9.2(4), 9.3 before 9.3(3.5), and 9.4 before 9.4(1.5) allows remote attackers to cause a denial of service (device reload) via a crafted DNS response, aka Bug ID CSCuu07799. |
| Untrusted search path vulnerability in Cisco ASA Software 8.x before 8.4(3), 8.5, and 8.7 before 8.7(1.13) allows local users to gain privileges by placing a Trojan horse library file in external memory, leading to library use after device reload because of an incorrect LD_LIBRARY_PATH value, aka Bug ID CSCtq52661. |
| Cisco Adaptive Security Appliance (ASA) Software 8.x before 8.2(5.48), 8.3 before 8.3(2.40), 8.4 before 8.4(7.9), 8.6 before 8.6(1.13), 9.0 before 9.0(4.1), and 9.1 before 9.1(4.3) does not properly process management-session information during privilege validation for SSL VPN portal connections, which allows remote authenticated users to gain privileges by establishing a Clientless SSL VPN session and entering crafted URLs, aka Bug ID CSCul70099. |
| The XML parser in Cisco Adaptive Security Appliance (ASA) Software through 9.5.2 allows remote authenticated users to cause a denial of service (instability, memory consumption, or device reload) by leveraging (1) administrative access or (2) Clientless SSL VPN access to provide a crafted XML document, aka Bug ID CSCut14209. |
| The SNMP implementation in Cisco Adaptive Security Appliance (ASA) Software 8.4(7) and 8.6(1.2) allows remote authenticated users to cause a denial of service (device reload) by sending many SNMP requests during a time of high network traffic, aka Bug ID CSCul02601. |
| Buffer overflow in the IKEv1 and IKEv2 implementations in Cisco ASA Software before 8.4(7.30), 8.7 before 8.7(1.18), 9.0 before 9.0(4.38), 9.1 before 9.1(7), 9.2 before 9.2(4.5), 9.3 before 9.3(3.7), 9.4 before 9.4(2.4), and 9.5 before 9.5(2.2) on ASA 5500 devices, ASA 5500-X devices, ASA Services Module for Cisco Catalyst 6500 and Cisco 7600 devices, ASA 1000V devices, Adaptive Security Virtual Appliance (aka ASAv), Firepower 9300 ASA Security Module, and ISA 3000 devices allows remote attackers to execute arbitrary code or cause a denial of service (device reload) via crafted UDP packets, aka Bug IDs CSCux29978 and CSCux42019. |
