Search vulnerabilities

Results 34,648

CVE-2025-34100

BuilderEngine 3.5.0 RCE via Unauthenticated Arbitrary File Upload

An unrestricted file upload vulnerability exists in BuilderEngine 3.5.0 via the integration of the elFinder 2.0 file manager and its use of the jQuery File Upload plugin. The plugin fails to properly validate or restrict file types or locations during upload operations, allowing an attacker to upload a malicious .php file and subsequently execute arbitrary PHP code on the server under the context of the web server process. While the root vulnerability lies within the jQuery File Upload component, BuilderEngine’s improper integration and lack of access controls expose this functionality to unauthenticated users, resulting in full remote code execution.

CVSS 4.0 · 9.3 Critical EPSS 3.9% KEV · Not listed
Vendors
—
Products
—
CVE-2020-36967

Zortam Mp3 Media Studio 27.60 - Remote Code Execution (SEH)

Zortam Mp3 Media Studio 27.60 contains a buffer overflow vulnerability in the library creation file selection process that allows remote code execution. Attackers can craft a malicious text file with shellcode to trigger a structured exception handler (SEH) overwrite and execute arbitrary commands on the target system.

CVSS 4.0 · 8.4 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2023-7017

CVE-2023-7017

Sciener locks' firmware update mechanism do not authenticate or validate firmware updates if passed to the lock through the Bluetooth Low Energy service. A challenge request can be sent to the lock with a command to prepare for an update, rather than an unlock request, allowing an attacker to compromise the device.

CVSS 3.1 · 9.8 Critical EPSS < 1% KEV · Not listed
Vendors
CVE-2025-5124

Sony SNC-M1 Administrative Interface default credentials

A vulnerability classified as critical has been found in Sony SNC-M1, SNC-M3, SNC-RZ25N, SNC-RZ30N, SNC-DS10, SNC-CS3N and SNC-RX570N up to 1.30. This affects an unknown part of the component Administrative Interface. The manipulation leads to use of default credentials. It is possible to initiate the attack remotely. The complexity of an attack is rather high. The exploitability is told to be difficult. The exploit has been disclosed to the public and may be used. The real existence of this vulnerability is still doubted at the moment. It is recommended to change the configuration settings. The vendor was contacted early about this issue. They confirmed the existence but pointed out that they "have published the 'Hardening Guide' on the Web from July 2018 to January 2025 and have thoroughly informed customers of the recommendation to change their initial passwords".

CVSS 4.0 · 9.2 Critical EPSS 1.0% KEV · Not listed
Vendors
—
Products
—
CVE-2025-64388

Denial of service through specific packets

Denial of service of the web server through specific requests to this protocol

CVSS 4.0 · 9.2 Critical EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2021-47667

An OS command injection vulnerability in lib/NSSDropoff.php in ZendTo 5.24-3 through 6.x before 6.10-7 allows unauthenticated remote attackers to execute arbitrary commands via shell metacharacters in the tmp_name parameter when dropping off a file via a POST /dropoff request.

CVSS 3.1 · 10 Critical EPSS 36.4% KEV · Not listed
Vendors
Products
CVE-2021-47774

Kingdia CD Extractor 3.0.2 - Buffer Overflow (SEH)

Kingdia CD Extractor 3.0.2 contains a buffer overflow vulnerability in the registration name field that allows attackers to execute arbitrary code. Attackers can craft a malicious payload exceeding 256 bytes to overwrite Structured Exception Handler and gain remote code execution through a bind shell.

CVSS 4.0 · 8.4 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2025-15346

wolfSSL Python library `CERT_REQUIRED` mode fails to enforce client certificate requirement

A vulnerability in the handling of verify_mode = CERT_REQUIRED in the wolfssl Python package (wolfssl-py) causes client certificate requirements to not be fully enforced.  Because the WOLFSSL_VERIFY_FAIL_IF_NO_PEER_CERT flag was not included, the behavior effectively matched CERT_OPTIONAL: a peer certificate was verified if presented, but connections were incorrectly authenticated when no client certificate was provided.  This results in improper authentication, allowing attackers to bypass mutual TLS (mTLS) client authentication by omitting a client certificate during the TLS handshake.  The issue affects versions up to and including 5.8.2.

CVSS 4.0 · 9.3 Critical EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2024-37018

The OpenDaylight 0.15.3 controller allows topology poisoning via API requests because an application can manipulate the path that is taken by discovery packets.

CVSS 3.1 · 9.1 Critical EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2024-6127

BC Security Empire Path Traversal RCE

BC Security Empire before 5.9.3 is vulnerable to a path traversal issue that can lead to remote code execution. A remote, unauthenticated attacker can exploit this vulnerability over HTTP by acting as a normal agent, completing all cryptographic handshakes, and then triggering an upload of payload data containing a malicious path.

CVSS 3.1 · 9.8 Critical EPSS 10.3% KEV · Not listed
Vendors
Products
CVE-2023-7304

Ruijie RG-UAC nmc_sync.php Command Injection

Ruijie RG-UAC Application Management Gateway contains a command injection vulnerability via the 'nmc_sync.php' interface. An unauthenticated attacker able to reach the affected endpoint can inject shell commands via crafted request data, causing the application to execute arbitrary commands on the host. Successful exploitation can yield full control of the application process and may lead to system-level access depending on the service privileges. VulnCheck has observed this vulnerability being targeted by the RondoDox botnet campaign.

CVSS 4.0 · 9.3 Critical EPSS 3.6% KEV · Not listed
Vendors
Products
CVE-2024-33449

An SSRF issue in the PDFMyURL service allows a remote attacker to obtain sensitive information and execute arbitrary code via a POST request in the url parameter

CVSS 3.1 · 9.8 Critical EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2025-34095

Mako Server v2.5 and v2.6 OS Command Injection via examples/save.lsp

An OS command injection vulnerability exists in Mako Server versions 2.5 and 2.6, specifically within the tutorial interface provided by the examples/save.lsp endpoint. An unauthenticated attacker can send a crafted PUT request containing arbitrary Lua os.execute() code, which is then persisted on disk and triggered via a subsequent GET request to examples/manage.lsp. This allows remote command execution on the underlying operating system, impacting both Windows and Unix-based deployments.

CVSS 4.0 · 9.3 Critical EPSS 6.2% KEV · Not listed
Vendors
—
Products
—
CVE-2025-34099

VICIdial vicidial_sales_viewer.php Unauthenticated Command Injection via Basic Auth Password

An unauthenticated command injection vulnerability exists in VICIdial versions 2.9 RC1 through 2.13 RC1, within the vicidial_sales_viewer.php component when password encryption is enabled (a non-default configuration). The application improperly passes the HTTP Basic Authentication password directly to a call to exec() without adequate sanitation. This allows remote attackers to inject and execute arbitrary operating system commands as the web server user. NOTE: This vulnerability was mitigated in 2017.

CVSS 4.0 · 9.3 Critical EPSS 1.6% KEV · Not listed
Vendors
Products
CVE-2009-20009

Belkin Bulldog Plus Web Service Buffer Overflow

Belkin Bulldog Plus version 4.0.2 build 1219 contains a stack-based buffer overflow vulnerability in its web service authentication handler. When a specially crafted HTTP request is sent with an oversized Authorization header, the application fails to properly validate the input length before copying it into a fixed-size buffer, resulting in memory corruption and potential remote code execution. Exploitation requires network access and does not require prior authentication.

CVSS 4.0 · 9.3 Critical EPSS 1.8% KEV · Not listed
Vendors
Products
CVE-2023-3939

Multiple command injection in ZkTeco-based OEM devices

Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection') vulnerability in ZkTeco-based OEM devices allows OS Command Injection. Since all the found command implementations are executed from the superuser, their impact is the maximum possible. This issue affects ZkTeco-based OEM devices (ZkTeco ProFace X, Smartec ST-FR043, Smartec ST-FR041ME and possibly others) with the ZAM170-NF-1.8.25-7354-Ver1.0.0 and possibly other.

CVSS 3.1 · 10 Critical EPSS 1.3% KEV · Not listed
Vendors
—
Products
—
CVE-2025-32977

Quest KACE Systems Management Appliance (SMA) 13.0.x before 13.0.385, 13.1.x before 13.1.81, 13.2.x before 13.2.183, 14.0.x before 14.0.341 (Patch 5), and 14.1.x before 14.1.101 (Patch 4) allows unauthenticated users to upload backup files to the system. While signature validation is implemented, weaknesses in the validation process can be exploited to upload malicious backup content that could compromise system integrity.

CVSS 3.1 · 9.6 Critical EPSS < 1% KEV · Not listed
Vendors
CVE-2025-30122

An issue was discovered on ROADCAM X3 devices. It has a uniform default credential set that cannot be modified by users, making it easy for attackers to gain unauthorized access to multiple devices.

CVSS 3.1 · 9.8 Critical EPSS < 1% KEV · Not listed
Vendors
—
Products
—
CVE-2025-30123

An issue was discovered on ROADCAM X3 devices. The mobile app APK (Viidure) contains hardcoded FTP credentials for the FTPX user account, enabling attackers to gain unauthorized access and extract sensitive recorded footage from the device.

CVSS 3.1 · 9.8 Critical EPSS < 1% KEV · Not listed
Vendors
—
Products
—
CVE-2025-30137

An issue was discovered in the G-Net GNET APK 2.6.2. Hardcoded credentials exist in in APK for ports 9091 and 9092. The GNET mobile application contains hardcoded credentials that provide unauthorized access to the dashcam's API endpoints on ports 9091 and 9092. Once the GNET SSID is connected to, the attacker sends a crafted authentication command with TibetList and 000000 to list settings of the dashcam at port 9091. There's a separate set of credentials for port 9092 (stream) that is also exposed in cleartext: admin + tibet. For settings, the required credentials are adim + 000000.

CVSS 3.1 · 9.8 Critical EPSS < 1% KEV · Not listed
Vendors
—
Products
—