| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath12k: fix kernel crash during resume
Currently during resume, QMI target memory is not properly handled, resulting
in kernel crash in case DMA remap is not supported:
BUG: Bad page state in process kworker/u16:54 pfn:36e80
page: refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x36e80
page dumped because: nonzero _refcount
Call Trace:
bad_page
free_page_is_bad_report
__free_pages_ok
__free_pages
dma_direct_free
dma_free_attrs
ath12k_qmi_free_target_mem_chunk
ath12k_qmi_msg_mem_request_cb
The reason is:
Once ath12k module is loaded, firmware sends memory request to host. In case
DMA remap not supported, ath12k refuses the first request due to failure in
allocating with large segment size:
ath12k_pci 0000:04:00.0: qmi firmware request memory request
ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 7077888
ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 8454144
ath12k_pci 0000:04:00.0: qmi dma allocation failed (7077888 B type 1), will try later with small size
ath12k_pci 0000:04:00.0: qmi delays mem_request 2
ath12k_pci 0000:04:00.0: qmi firmware request memory request
Later firmware comes back with more but small segments and allocation
succeeds:
ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 262144
ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 65536
ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288
Now ath12k is working. If suspend is triggered, firmware will be reloaded
during resume. As same as before, firmware requests two large segments at
first. In ath12k_qmi_msg_mem_request_cb() segment count and size are
assigned:
ab->qmi.mem_seg_count == 2
ab->qmi.target_mem[0].size == 7077888
ab->qmi.target_mem[1].size == 8454144
Then allocation failed like before and ath12k_qmi_free_target_mem_chunk()
is called to free all allocated segments. Note the first segment is skipped
because its v.addr is cleared due to allocation failure:
chunk->v.addr = dma_alloc_coherent()
Also note that this leaks that segment because it has not been freed.
While freeing the second segment, a size of 8454144 is passed to
dma_free_coherent(). However remember that this segment is allocated at
the first time firmware is loaded, before suspend. So its real size is
524288, much smaller than 8454144. As a result kernel found we are freeing
some memory which is in use and thus cras
---truncated--- |
| BT: Classic: SDP OOB access in get_att_search_list |
| BT: HCI: adv_ext_report Improper discarding in adv_ext_report |
| No proper validation of the length of user input in olcp_ind_handler in zephyr/subsys/bluetooth/services/ots/ots_client.c. |
| BT: Missing length checks of net_buf in rfcomm_handle_data |
| BT: Unchecked user input in bap_broadcast_assistant |
| A vulnerability was found in D-Link DIR-513 1.0. It has been rated as critical. This issue affects the function formLanguageChange of the file /goform/formLanguageChange of the component HTTP POST Request Handler. The manipulation of the argument curTime leads to stack-based buffer overflow. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer. |
| A vulnerability was identified in JasPer up to 4.2.5. This affects the function jpc_dec_dump of the file src/libjasper/jpc/jpc_dec.c of the component JPEG2000 File Handler. The manipulation leads to use after free. An attack has to be approached locally. The exploit has been disclosed to the public and may be used. The patch is named 8308060d3fbc1da10353ac8a95c8ea60eba9c25a. It is recommended to apply a patch to fix this issue. |
| An issue was discovered in GFI Kerio Control 9.2.5 through 9.4.5. The dest GET parameter passed to the /nonauth/addCertException.cs and /nonauth/guestConfirm.cs and /nonauth/expiration.cs pages is not properly sanitized before being used to generate a Location HTTP header in a 302 HTTP response. This can be exploited to perform Open Redirect or HTTP Response Splitting attacks, which in turn lead to Reflected Cross-Site Scripting (XSS). Remote command execution can be achieved by leveraging the upgrade feature in the admin interface. |
| In Ashlar-Vellum Cobalt versions prior to v12 SP2 Build (1204.200), the affected application lacks proper validation of user-supplied data when parsing CO files. This could lead to a heap-based buffer overflow. An attacker could leverage this vulnerability to execute arbitrary code in the context of the current process. |
| In the Linux kernel, the following vulnerability has been resolved:
i2c: i801: Don't generate an interrupt on bus reset
Now that the i2c-i801 driver supports interrupts, setting the KILL bit
in a attempt to recover from a timed out transaction triggers an
interrupt. Unfortunately, the interrupt handler (i801_isr) is not
prepared for this situation and will try to process the interrupt as
if it was signaling the end of a successful transaction. In the case
of a block transaction, this can result in an out-of-range memory
access.
This condition was reproduced several times by syzbot:
https://syzkaller.appspot.com/bug?extid=ed71512d469895b5b34e
https://syzkaller.appspot.com/bug?extid=8c8dedc0ba9e03f6c79e
https://syzkaller.appspot.com/bug?extid=c8ff0b6d6c73d81b610e
https://syzkaller.appspot.com/bug?extid=33f6c360821c399d69eb
https://syzkaller.appspot.com/bug?extid=be15dc0b1933f04b043a
https://syzkaller.appspot.com/bug?extid=b4d3fd1dfd53e90afd79
So disable interrupts while trying to reset the bus. Interrupts will
be enabled again for the following transaction. |
| A vulnerability, which was classified as problematic, was found in GNU libopts up to 27.6. Affected is the function __strstr_sse2. The manipulation leads to memory corruption. Local access is required to approach this attack. The exploit has been disclosed to the public and may be used. This issue was initially reported to the tcpreplay project, but the code maintainer explains, that this "bug appears to be in libopts which is an external library." This vulnerability only affects products that are no longer supported by the maintainer. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: Reset IH OVERFLOW_CLEAR bit
Allows us to detect subsequent IH ring buffer overflows as well. |
| Buffer-Overflow vulnerability at conv.c:68 of stsaz phiola v2.0-rc22 allows a remote attacker to execute arbitrary code via the a crafted .wav file. |
| Tenda G3 v3.0br_V15.11.0.17 was discovered to contain a stack overflow in the bindDhcpIndex parameter in the modifyDhcpRule function. This vulnerability allows attackers to cause a Denial of Service (DoS) via a crafted request. |
| Tenda G3 v3.0br_V15.11.0.17 was discovered to contain a stack overflow in the portMappingIndex parameter in the formDelPortMapping function. This vulnerability allows attackers to cause a Denial of Service (DoS) via a crafted request. |
| Tenda G3 v3.0br_V15.11.0.17 was discovered to contain multiple stack overflows in the formIPMacBindModify function via the ruleId, ip, mac, v6 and remark parameters. This vulnerability allows attackers to cause a Denial of Service (DoS) via a crafted request. |
| Tenda G3 v3.0br_V15.11.0.17 was discovered to contain a stack overflow in the dhcpIndex parameter in the addDhcpRule function. This vulnerability allows attackers to cause a Denial of Service (DoS) via a crafted request. |
| Tenda G3 v3.0br_V15.11.0.17 was discovered to contain multiple stack overflows in the formSetDebugCfg function via the pEnable, pLevel, and pModule parameters. This vulnerability allows attackers to cause a Denial of Service (DoS) via a crafted request. |
| Tenda G3 v3.0br_V15.11.0.17 was discovered to contain a stack overflow in the listStr parameter in the ipMacBindListStore function. This vulnerability allows attackers to cause a Denial of Service (DoS) via a crafted request. |
