| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A vulnerability in the implementation of the Simple Network Management Protocol (SNMP) IPv4 access control list (ACL) feature of Cisco IOS Software and Cisco IOS XE Software could allow an unauthenticated, remote attacker to perform SNMP polling of an affected device, even if it is configured to deny SNMP traffic.
This vulnerability exists because Cisco IOS Software and Cisco IOS XE Software do not support extended IPv4 ACLs for SNMP, but they do allow administrators to configure extended named IPv4 ACLs that are attached to the SNMP server configuration without a warning message. This can result in no ACL being applied to the SNMP listening process. An attacker could exploit this vulnerability by performing SNMP polling of an affected device. A successful exploit could allow the attacker to perform SNMP operations that should be denied. The attacker has no control of the SNMP ACL configuration and would still need a valid SNMP version 2c (SNMPv2c) community string or SNMP version 3 (SNMPv3) user credentials.
SNMP with IPv6 ACL configurations is not affected.
For more information, see the section of this advisory. |
| In Splunk Enterprise versions below 9.4.1, 9.3.3, 9.2.5, and 9.1.8, and versions below 3.8.38 and 3.7.23 of the Splunk Secure Gateway app on Splunk Cloud Platform, a low-privileged user that does not hold the “admin“ or “power“ Splunk roles could edit and delete other user data in App Key Value Store (KVStore) collections that the Splunk Secure Gateway app created. This is due to missing access control and incorrect ownership of the data in those KVStore collections.<br><br>In the affected versions, the `nobody` user owned the data in the KVStore collections. This meant that there was no specific owner assigned to the data in those collections. |
| Frappe is a full-stack web application framework. Prior to versions 14.89.0 and 15.51.0, making crafted requests could lead to information disclosure that could further lead to account takeover. Versions 14.89.0 and 15.51.0 fix the issue. There's no workaround to fix this without upgrading. |
| A vulnerability in the restricted security domain implementation of Cisco Application Policy Infrastructure Controller (APIC) could allow an authenticated, remote attacker to modify the behavior of default system policies, such as quality of service (QoS) policies, on an affected system. This vulnerability is due to improper access control when restricted security domains are used to implement multi-tenancy. An attacker with a valid user account associated with a restricted security domain could exploit this vulnerability. A successful exploit could allow the attacker to read, modify, or delete child policies created under default system policies, which are implicitly used by all tenants in the fabric, resulting in disruption of network traffic. Exploitation is not possible for policies under tenants that an attacker has no authorization to access. |
| A vulnerability in the Trend Micro Apex One Security Agent Plug-in User Interface Manager could allow a local attacker to bypass existing security and execute arbitrary code on affected installations.
This CVE address an addtional bypass not covered in CVE-2024-58104.
Please note: an attacker must first obtain the ability to execute low-privileged code on the target system in order to exploit this vulnerability. |
| Kyverno is a policy engine designed for cloud native platform engineering teams. Prior to version 1.14.0-alpha.1, Kyverno ignores subjectRegExp and IssuerRegExp while verifying artifact's sign with keyless mode. It allows the attacker to deploy kubernetes resources with the artifacts that were signed by unexpected certificate. Deploying these unauthorized kubernetes resources can lead to full compromise of kubernetes cluster. Version 1.14.0-alpha.1 contains a patch for the issue. |
| The WooCommerce - Social Login plugin for WordPress is vulnerable to authentication bypass in all versions up to, and including, 2.7.7. This is due to insufficient verification on the user being returned by the social login token. This makes it possible for unauthenticated attackers to log in as any existing user on the site, such as an administrator, if they have access to the email and the user does not have an already-existing account for the service returning the token. |
| A vulnerability has been found in SourceCodester Food Menu Manager 1.0 and classified as critical. Affected by this vulnerability is an unknown functionality of the file endpoint/update.php. The manipulation leads to unrestricted upload. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. |
| ExaGrid EX10 6.3 - 7.0.1.P08 is vulnerable to Incorrect Access Control in the MailConfiguration API endpoint, where users with operator-level privileges can issue an HTTP request to retrieve SMTP credentials, including plaintext passwords. |
| A vulnerability in the web-based management interface of Cisco AsyncOS for Cisco Content Security Management Appliance (SMA) could allow an unauthenticated, remote attacker to obtain sensitive network information. |
| A vulnerability classified as critical has been found in code-projects Online Ordering System 1.0. Affected is an unknown function of the file /admin/product.php. The manipulation of the argument image leads to unrestricted upload. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. |
| A vulnerability was found in Vaelsys 4.1.0 and classified as critical. This issue affects some unknown processing of the file /grid/vgrid_server.php of the component User Creation Handler. The manipulation leads to improper authorization. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| Dell RecoverPoint for Virtual Machines 6.0.X contains a command execution vulnerability. A Low privileged malicious user with local access could potentially exploit this vulnerability by running the specific binary and perform any administrative action permitted by it resulting in shutting down the server, modifying the configuration leading to gain access to unauthorized data. |
| A vulnerability in the web-based management interface of Cisco Data Center Network Manager (DCNM) could allow an authenticated, remote attacker to view, modify, and delete data without proper authorization.
The vulnerability is due to a failure to limit access to resources that are intended for users with Administrator privileges. An attacker could exploit this vulnerability by convincing a user to click a malicious URL. A successful exploit could allow a low-privileged attacker to list, view, create, edit, and delete templates in the same manner as a user with Administrator privileges.Cisco has released software updates that address this vulnerability. There are no workarounds that address this vulnerability. |
| A vulnerability was found in code-projects Exam Form Submission 1.0. It has been rated as critical. This issue affects some unknown processing of the file /register.php. The manipulation of the argument image leads to unrestricted upload. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. |
| A vulnerability in the lobby ambassador web interface of Cisco IOS XE Wireless Controller Software could allow an authenticated, remote attacker to remove arbitrary users that are defined on an affected device.
This vulnerability is due to insufficient access control of actions executed by lobby ambassador users. An attacker could exploit this vulnerability by logging in to an affected device with a lobby ambassador user account and sending crafted HTTP requests to the API. A successful exploit could allow the attacker to delete arbitrary user accounts on the device, including users with administrative privileges.
Note: This vulnerability is exploitable only if the attacker obtains the credentials for a lobby ambassador account. This account is not configured by default. |
| A vulnerability in the upgrade mechanism of Cisco collaboration products based on the Cisco Voice Operating System software platform could allow an unauthenticated, remote attacker to gain unauthorized, elevated access to an affected device. The vulnerability occurs when a refresh upgrade (RU) or Prime Collaboration Deployment (PCD) migration is performed on an affected device. When a refresh upgrade or PCD migration is completed successfully, an engineering flag remains enabled and could allow root access to the device with a known password. If the vulnerable device is subsequently upgraded using the standard upgrade method to an Engineering Special Release, service update, or a new major release of the affected product, this vulnerability is remediated by that action. Note: Engineering Special Releases that are installed as COP files, as opposed to the standard upgrade method, do not remediate this vulnerability. An attacker who can access an affected device over SFTP while it is in a vulnerable state could gain root access to the device. This access could allow the attacker to compromise the affected system completely. Cisco Bug IDs: CSCvg22923, CSCvg55112, CSCvg55128, CSCvg55145, CSCvg58619, CSCvg64453, CSCvg64456, CSCvg64464, CSCvg64475, CSCvg68797. |
| In OpenVSX version v0.9.0 to v0.20.0, the
/user/namespace/{namespace}/details API allows a user to edit all
namespace details, even if the user is not a namespace Owner or
Contributor. The details include: name, description, website, support
link and social media links. The same issues existed in
/user/namespace/{namespace}/details/logo and allowed a user to change
the logo. |
| A vulnerability in the email filtering mechanism of Cisco Secure Email Gateway could allow an unauthenticated, remote attacker to bypass the configured rules and allow emails that should have been denied to flow through an affected device.
This vulnerability is due to improper handling of email that passes through an affected device. An attacker could exploit this vulnerability by sending a crafted email through the affected device. A successful exploit could allow the attacker to bypass email filters on the affected device. |
| A vulnerability in the file policy feature that is used to inspect encrypted archive files of Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to bypass a configured file policy to block an encrypted archive file. This vulnerability exists because of a logic error when a specific class of encrypted archive files is inspected. An attacker could exploit this vulnerability by sending a crafted, encrypted archive file through the affected device. A successful exploit could allow the attacker to send an encrypted archive file, which could contain malware and should have been blocked and dropped at the Cisco FTD device. |
