| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| An issue was discovered in NLnet Labs Routinator 0.1.0 through 0.7.1. It allows remote attackers to bypass intended access restrictions or to cause a denial of service on dependent routing systems by strategically withholding RPKI Route Origin Authorisation ".roa" files or X509 Certificate Revocation List files from the RPKI relying party's view. |
| HashiCorp Vault and Vault Enterprise versions 0.7.1 and newer, when configured with the AWS IAM auth method, may be vulnerable to authentication bypass. Fixed in 1.2.5, 1.3.8, 1.4.4, and 1.5.1.. |
| In Patient Information Center iX (PICiX) Versions C.02 and C.03,
PerformanceBridge Focal Point Version A.01, IntelliVue patient monitors
MX100, MX400-MX550, MX750, MX850, and IntelliVue X3 Versions N and
prior, the software does not check or incorrectly checks the revocation
status of a certificate, which may cause it to use a compromised
certificate.
|
| An issue was discovered in Octopus Deploy 3.4. A deployment target can be configured with an Account or Certificate that is outside the scope of the deployment target. An authorised user can potentially use a certificate that they are not in scope to use. An authorised user is also able to obtain certificate metadata by associating a certificate with certain resources that should fail scope validation. |
| An issue was discovered in RIPE NCC RPKI Validator 3.x through 3.1-2020.07.06.14.28. It allows remote attackers to bypass intended access restrictions or to cause a denial of service on dependent routing systems by strategically withholding RPKI Route Origin Authorisation ".roa" files or X509 Certificate Revocation List files from the RPKI relying party's view. NOTE: some third parties may regard this as a preferred behavior, not a vulnerability |
| An issue was discovered in RIPE NCC RPKI Validator 3.x before 3.1-2020.07.06.14.28. RRDP fetches proceed even with a lack of validation of a TLS HTTPS endpoint. This allows remote attackers to bypass intended access restrictions, or to trigger denial of service to traffic directed to co-dependent routing systems. NOTE: third parties assert that the behavior is intentionally permitted by RFC 8182 |
| An issue was discovered in RIPE NCC RPKI Validator 3.x through 3.1-2020.07.06.14.28. Missing validation checks on CRL presence or CRL staleness in the X509-based RPKI certificate-tree validation procedure allow remote attackers to bypass intended access restrictions by using revoked certificates. NOTE: there may be counterarguments related to backwards compatibility |
| In LemonLDAP::NG (aka lemonldap-ng) through 2.0.8, validity of the X.509 certificate is not checked by default when connecting to remote LDAP backends, because the default configuration of the Net::LDAPS module for Perl is used. |
| Graylog before 3.3.3 lacks SSL Certificate Validation for LDAP servers. It allows use of an external user/group database stored in LDAP. The connection configuration allows the usage of unencrypted, SSL- or TLS-secured connections. Unfortunately, the Graylog client code (in all versions that support LDAP) does not implement proper certificate validation (regardless of whether the "Allow self-signed certificates" option is used). Therefore, any attacker with the ability to intercept network traffic between a Graylog server and an LDAP server is able to redirect traffic to a different LDAP server (unnoticed by the Graylog server due to the lack of certificate validation), effectively bypassing Graylog's authentication mechanism. |
| Improper Certificate Validation vulnerability in the Online Threat Prevention module as used in Bitdefender Total Security allows an attacker to potentially bypass HTTP Strict Transport Security (HSTS) checks. This issue affects: Bitdefender Total Security versions prior to 25.0.7.29. Bitdefender Internet Security versions prior to 25.0.7.29. Bitdefender Antivirus Plus versions prior to 25.0.7.29. |
| In Dogtag PKI through 10.8.3, the pki.client.PKIConnection class did not enable python-requests certificate validation. Since the verify parameter was hard-coded in all request functions, it was not possible to override the setting. As a result, tools making use of this class, such as the pki-server command, may have been vulnerable to Person-in-the-Middle attacks in certain non-localhost use cases. This is fixed in 10.9.0-b1. |
| libldap in certain third-party OpenLDAP packages has a certificate-validation flaw when the third-party package is asserting RFC6125 support. It considers CN even when there is a non-matching subjectAltName (SAN). This is fixed in, for example, openldap-2.4.46-10.el8 in Red Hat Enterprise Linux. |
| The HTTP Digest Authentication in the GoAhead web server before 5.1.2 does not completely protect against replay attacks. This allows an unauthenticated remote attacker to bypass authentication via capture-replay if TLS is not used to protect the underlying communication channel. |
| An incomplete SSL server certification validation vulnerability in the Trend Micro Security 2019 (v15) consumer family of products could allow an attacker to combine this vulnerability with another attack to trick an affected client into downloading a malicious update instead of the expected one. CWE-494: Update files are not properly verified. |
| In Redgate SQL Monitor 7.1.4 through 10.1.6 (inclusive), the scope for disabling some TLS security certificate checks can extend beyond that defined by various options on the Configuration > Notifications pages to disable certificate checking for alert notifications. These TLS security checks are also ignored during monitoring of VMware machines. This would make SQL Monitor vulnerable to potential man-in-the-middle attacks when sending alert notification emails, posting to Slack or posting to webhooks. The vulnerability is fixed in version 10.1.7. |
| An issue was discovered on ASUS RT-AC1900P routers before 3.0.0.4.385_20253. The router accepts an arbitrary server certificate for a firmware update. The culprit is the --no-check-certificate option passed to wget tool used to download firmware update files. |
| PJSIP is a free and open source multimedia communication library written in C language implementing standard based protocols such as SIP, SDP, RTP, STUN, TURN, and ICE. In version 2.10 and earlier, PJSIP transport can be reused if they have the same IP address + port + protocol. However, this is insufficient for secure transport since it lacks remote hostname authentication. Suppose we have created a TLS connection to `sip.foo.com`, which has an IP address `100.1.1.1`. If we want to create a TLS connection to another hostname, say `sip.bar.com`, which has the same IP address, then it will reuse that existing connection, even though `100.1.1.1` does not have certificate to authenticate as `sip.bar.com`. The vulnerability allows for an insecure interaction without user awareness. It affects users who need access to connections to different destinations that translate to the same address, and allows man-in-the-middle attack if attacker can route a connection to another destination such as in the case of DNS spoofing. |
| Faye before version 1.4.0, there is a lack of certification validation in TLS handshakes. Faye uses em-http-request and faye-websocket in the Ruby version of its client. Those libraries both use the `EM::Connection#start_tls` method in EventMachine to implement the TLS handshake whenever a `wss:` URL is used for the connection. This method does not implement certificate verification by default, meaning that it does not check that the server presents a valid and trusted TLS certificate for the expected hostname. That means that any `https:` or `wss:` connection made using these libraries is vulnerable to a man-in-the-middle attack, since it does not confirm the identity of the server it is connected to. The first request a Faye client makes is always sent via normal HTTP, but later messages may be sent via WebSocket. Therefore it is vulnerable to the same problem that these underlying libraries are, and we needed both libraries to support TLS verification before Faye could claim to do the same. Your client would still be insecure if its initial HTTPS request was verified, but later WebSocket connections were not. This is fixed in Faye v1.4.0, which enables verification by default. For further background information on this issue, please see the referenced GitHub Advisory. |
| In faye-websocket before version 0.11.0, there is a lack of certification validation in TLS handshakes. The `Faye::WebSocket::Client` class uses the `EM::Connection#start_tls` method in EventMachine to implement the TLS handshake whenever a `wss:` URL is used for the connection. This method does not implement certificate verification by default, meaning that it does not check that the server presents a valid and trusted TLS certificate for the expected hostname. That means that any `wss:` connection made using this library is vulnerable to a man-in-the-middle attack, since it does not confirm the identity of the server it is connected to. For further background information on this issue, please see the referenced GitHub Advisory. Upgrading `faye-websocket` to v0.11.0 is recommended. |
| In Envoy before versions 1.12.6, 1.13.4, 1.14.4, and 1.15.0 when validating TLS certificates, Envoy would incorrectly allow a wildcard DNS Subject Alternative Name apply to multiple subdomains. For example, with a SAN of *.example.com, Envoy would incorrectly allow nested.subdomain.example.com, when it should only allow subdomain.example.com. This defect applies to both validating a client TLS certificate in mTLS, and validating a server TLS certificate for upstream connections. This vulnerability is only applicable to situations where an untrusted entity can obtain a signed wildcard TLS certificate for a domain of which you only intend to trust a subdomain of. For example, if you intend to trust api.mysubdomain.example.com, and an untrusted actor can obtain a signed TLS certificate for *.example.com or *.com. Configurations are vulnerable if they use verify_subject_alt_name in any Envoy version, or if they use match_subject_alt_names in version 1.14 or later. This issue has been fixed in Envoy versions 1.12.6, 1.13.4, 1.14.4, 1.15.0. |
