| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| free5GC is an open-source implementation of the 5G core network. Prior to 4.2.2, free5GC's SMF mounts the UPI management route group without inbound OAuth2 middleware. The POST /upi/v1/upNodesLinks create-or-update handler accepts attacker-controlled JSON and passes it directly into UpNodesFromConfiguration(), which calls logger.InitLog.Fatalf(...) on several validation failures. One confirmed path is the UE-IP-pool overlap check: a single unauthenticated POST that adds a new UPF whose pool overlaps an existing UPF terminates the entire SMF process (docker ps shows Exited (1)), not just the goroutine. This vulnerability is fixed in 4.2.2. |
| Apache POI in versions prior to release 3.17 are vulnerable to Denial of Service Attacks: 1) Infinite Loops while parsing crafted WMF, EMF, MSG and macros (POI bugs 61338 and 61294), and 2) Out of Memory Exceptions while parsing crafted DOC, PPT and XLS (POI bugs 52372 and 61295). |
| Vulnerability in the Oracle Java SE, Oracle GraalVM Enterprise Edition, Oracle GraalVM for JDK product of Oracle Java SE (component: Utility). Supported versions that are affected are Oracle Java SE: 11.0.19, 17.0.7, 20.0.1; Oracle GraalVM Enterprise Edition: 20.3.10, 21.3.6, 22.3.2; Oracle GraalVM for JDK: 17.0.7 and 20.0.1. Difficult to exploit vulnerability allows unauthenticated attacker with network access via multiple protocols to compromise Oracle Java SE, Oracle GraalVM Enterprise Edition, Oracle GraalVM for JDK. Successful attacks of this vulnerability can result in unauthorized ability to cause a partial denial of service (partial DOS) of Oracle Java SE, Oracle GraalVM Enterprise Edition, Oracle GraalVM for JDK. Note: This vulnerability can be exploited by using APIs in the specified Component, e.g., through a web service which supplies data to the APIs. This vulnerability also applies to Java deployments, typically in clients running sandboxed Java Web Start applications or sandboxed Java applets, that load and run untrusted code (e.g., code that comes from the internet) and rely on the Java sandbox for security. CVSS 3.1 Base Score 3.7 (Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:N/A:L). |
| The in-memory keyring returned by NewKeyring() silently accepted keys with the ConfirmBeforeUse constraint but never enforced it. The key would sign without any confirmation prompt, with no indication to the caller that the constraint was not in effect. NewKeyring() now returns an error when unsupported constraints are requested. |
| free5GC is an open-source implementation of the 5G core network. Prior to 4.2.2, free5GC's NRF root SBI endpoint POST /oauth2/token contains a parser-level type-confusion bug family. The handler in NFs/nrf/internal/sbi/api_accesstoken.go reflects over models.NrfAccessTokenAccessTokenReq, special-cases only plain string and NrfNfManagementNfType fields, and treats every other field as if it were a single models.PlmnId. The parsed *models.PlmnId is then assigned with reflect.Value.Set() to whichever field name the attacker put in the form body, which panics whenever the destination field's real type is incompatible (slice, different struct, primitive). Gin recovery converts each panic into HTTP 500, but the endpoint remains remotely panicable from a single unauthenticated form-encoded request and is repeatedly triggerable. This vulnerability is fixed in 4.2.2. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: cdns3: fix role switching during resume
If the role change while we are suspended, the cdns3 driver switches to the
new mode during resume. However, switching to host mode in this context
causes a NULL pointer dereference.
The host role's start() operation registers a xhci-hcd device, but its
probe is deferred while we are in the resume path. The host role's resume()
operation assumes the xhci-hcd device is already probed, which is not the
case, leading to the dereference. Since the start() operation of the new
role is already called, the resume operation can be skipped.
So skip the resume operation for the new role if a role switch occurs
during resume. Once the resume sequence is complete, the xhci-hcd device
can be probed in case of host mode.
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000208
Mem abort info:
...
Data abort info:
...
[0000000000000208] pgd=0000000000000000, p4d=0000000000000000
Internal error: Oops: 0000000096000004 [#1] SMP
Modules linked in:
CPU: 0 UID: 0 PID: 146 Comm: sh Not tainted
6.19.0-rc7-00013-g6e64f4aabfae-dirty #135 PREEMPT
Hardware name: Texas Instruments J7200 EVM (DT)
pstate: 20000005 (nzCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : usb_hcd_is_primary_hcd+0x0/0x1c
lr : cdns_host_resume+0x24/0x5c
...
Call trace:
usb_hcd_is_primary_hcd+0x0/0x1c (P)
cdns_resume+0x6c/0xbc
cdns3_controller_resume.isra.0+0xe8/0x17c
cdns3_plat_resume+0x18/0x24
platform_pm_resume+0x2c/0x68
dpm_run_callback+0x90/0x248
device_resume+0x100/0x24c
dpm_resume+0x190/0x2ec
dpm_resume_end+0x18/0x34
suspend_devices_and_enter+0x2b0/0xa44
pm_suspend+0x16c/0x5fc
state_store+0x80/0xec
kobj_attr_store+0x18/0x2c
sysfs_kf_write+0x7c/0x94
kernfs_fop_write_iter+0x130/0x1dc
vfs_write+0x240/0x370
ksys_write+0x70/0x108
__arm64_sys_write+0x1c/0x28
invoke_syscall+0x48/0x10c
el0_svc_common.constprop.0+0x40/0xe0
do_el0_svc+0x1c/0x28
el0_svc+0x34/0x108
el0t_64_sync_handler+0xa0/0xe4
el0t_64_sync+0x198/0x19c
Code: 52800003 f9407ca5 d63f00a0 17ffffe4 (f9410401)
---[ end trace 0000000000000000 ]--- |
| free5GC is an open-source implementation of the 5G core network. Prior to 4.2.2, free5GC's NEF mounts the 3gpp-traffic-influence API without inbound OAuth2/bearer-token authorization. A network attacker who can reach NEF on the SBI can create, read, patch, and delete traffic-influence subscriptions either with no Authorization header at all, or with a forged bearer token (e.g. Authorization: Bearer not-a-real-token). This includes creating AnyUeInd=true subscriptions intended to affect group / any-UE traffic steering. The route group is also reachable even when the running config's ServiceList does not declare it, so operators who think they disabled the service via config are still exposed. This vulnerability is fixed in 4.2.2. |
| free5GC is an open-source implementation of the 5G core network. Prior to 4.2.2, free5GC's NEF mounts the nnef-oam route group without inbound OAuth2/bearer-token authorization. A network attacker who can reach NEF on the SBI can hit the OAM route with no Authorization header at all and the handler returns 200 OK. The current OAM handler is a stub that returns null, but the structural defect is route-group-scoped: the entire OAM route group has no inbound auth middleware, so every future OAM operation added to this group inherits the missing auth boundary by default. This vulnerability is fixed in 4.2.2. |
| free5GC is an open-source implementation of the 5G core network. Prior to 4.2.2, free5GC's SMF mounts the UPI management route group without inbound OAuth2 middleware. On top of that, the DELETE /upi/v1/upNodesLinks/{upNodeRef} handler unconditionally dereferences upNode.UPF after the type-guarded async release, even though AN-typed nodes are constructed without a UPF object. As a result, a single unauthenticated DELETE /upi/v1/upNodesLinks/gNB1 request crashes the handler with a nil-pointer panic AND mutates the in-memory user-plane topology before panicking (the UpNodeDelete(upNodeRef) line runs first). This is an unauthenticated, state-mutating panic-DoS sink that an off-path network attacker can trigger by name against any AN entry. This vulnerability is fixed in 4.2.2. |
| free5GC is an open-source implementation of the 5G core network. Prior to 4.2.2, free5GC's SMF mounts the UPI management route group without OAuth2/bearer-token authorization middleware. A network attacker who can reach SMF on the SBI can hit UPI endpoints with no Authorization header at all, and the requests reach the SMF business handlers. In the running Docker lab this was directly demonstrated for read (GET /upi/v1/upNodesLinks), write (POST /upi/v1/upNodesLinks with attacker-controlled UP-node and link payload), and delete (DELETE /upi/v1/upNodesLinks/{nodeID}) operations. This vulnerability is fixed in 4.2.2. |
| Budibase is an open-source low-code platform. Prior to 3.39.0, the webhook schema-building endpoint is registered under builderRoutes, but the generic authorization middleware skips authorization for all paths matching /api/webhooks/schema. As a result, an unauthenticated caller can update the body schema for a known webhook and mutate the corresponding automation trigger output schema. This vulnerability is fixed in 3.39.0. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: inside-secure/eip93 - unregister only available algorithm
EIP93 has an options register. This register indicates which crypto
algorithms are implemented in silicon. Supported algorithms are
registered on this basis. Unregister algorithms on the same basis.
Currently, all algorithms are unregistered, even those not supported
by HW. This results in panic on platforms that don't have all options
implemented in silicon. |
| In the Linux kernel, the following vulnerability has been resolved:
powerpc/eeh: fix recursive pci_lock_rescan_remove locking in EEH event handling
The recent commit 1010b4c012b0 ("powerpc/eeh: Make EEH driver device
hotplug safe") restructured the EEH driver to improve synchronization
with the PCI hotplug layer.
However, it inadvertently moved pci_lock_rescan_remove() outside its
intended scope in eeh_handle_normal_event(), leading to broken PCI
error reporting and improper EEH event triggering. Specifically,
eeh_handle_normal_event() acquired pci_lock_rescan_remove() before
calling eeh_pe_bus_get(), but eeh_pe_bus_get() itself attempts to
acquire the same lock internally, causing nested locking and disrupting
normal EEH event handling paths.
This patch adds a boolean parameter do_lock to _eeh_pe_bus_get(),
with two public wrappers:
eeh_pe_bus_get() with locking enabled.
eeh_pe_bus_get_nolock() that skips locking.
Callers that already hold pci_lock_rescan_remove() now use
eeh_pe_bus_get_nolock() to avoid recursive lock acquisition.
Additionally, pci_lock_rescan_remove() calls are restored to the correct
position—after eeh_pe_bus_get() and immediately before iterating affected
PEs and devices. This ensures EEH-triggered PCI removes occur under proper
bus rescan locking without recursive lock contention.
The eeh_pe_loc_get() function has been split into two functions:
eeh_pe_loc_get(struct eeh_pe *pe) which retrieves the loc for given PE.
eeh_pe_loc_get_bus(struct pci_bus *bus) which retrieves the location
code for given bus.
This resolves lockdep warnings such as:
<snip>
[ 84.964298] [ T928] ============================================
[ 84.964304] [ T928] WARNING: possible recursive locking detected
[ 84.964311] [ T928] 6.18.0-rc3 #51 Not tainted
[ 84.964315] [ T928] --------------------------------------------
[ 84.964320] [ T928] eehd/928 is trying to acquire lock:
[ 84.964324] [ T928] c000000003b29d58 (pci_rescan_remove_lock){+.+.}-{3:3}, at: pci_lock_rescan_remove+0x28/0x40
[ 84.964342] [ T928]
but task is already holding lock:
[ 84.964347] [ T928] c000000003b29d58 (pci_rescan_remove_lock){+.+.}-{3:3}, at: pci_lock_rescan_remove+0x28/0x40
[ 84.964357] [ T928]
other info that might help us debug this:
[ 84.964363] [ T928] Possible unsafe locking scenario:
[ 84.964367] [ T928] CPU0
[ 84.964370] [ T928] ----
[ 84.964373] [ T928] lock(pci_rescan_remove_lock);
[ 84.964378] [ T928] lock(pci_rescan_remove_lock);
[ 84.964383] [ T928]
*** DEADLOCK ***
[ 84.964388] [ T928] May be due to missing lock nesting notation
[ 84.964393] [ T928] 1 lock held by eehd/928:
[ 84.964397] [ T928] #0: c000000003b29d58 (pci_rescan_remove_lock){+.+.}-{3:3}, at: pci_lock_rescan_remove+0x28/0x40
[ 84.964408] [ T928]
stack backtrace:
[ 84.964414] [ T928] CPU: 2 UID: 0 PID: 928 Comm: eehd Not tainted 6.18.0-rc3 #51 VOLUNTARY
[ 84.964417] [ T928] Hardware name: IBM,9080-HEX POWER10 (architected) 0x800200 0xf000006 of:IBM,FW1060.00 (NH1060_022) hv:phyp pSeries
[ 84.964419] [ T928] Call Trace:
[ 84.964420] [ T928] [c0000011a7157990] [c000000001705de4] dump_stack_lvl+0xc8/0x130 (unreliable)
[ 84.964424] [ T928] [c0000011a71579d0] [c0000000002f66e0] print_deadlock_bug+0x430/0x440
[ 84.964428] [ T928] [c0000011a7157a70] [c0000000002fd0c0] __lock_acquire+0x1530/0x2d80
[ 84.964431] [ T928] [c0000011a7157ba0] [c0000000002fea54] lock_acquire+0x144/0x410
[ 84.964433] [ T928] [c0000011a7157cb0] [c0000011a7157cb0] __mutex_lock+0xf4/0x1050
[ 84.964436] [ T928] [c0000011a7157e00] [c000000000de21d8] pci_lock_rescan_remove+0x28/0x40
[ 84.964439] [ T928] [c0000011a7157e20] [c00000000004ed98] eeh_pe_bus_get+0x48/0xc0
[ 84.964442] [ T928] [c0000011a7157e50] [c00000
---truncated--- |
| OpenRapid RapidCMS v1.3.1 was discovered to contain an authentication bypass in the /template/default/menu.php component. This vulnerability is exploited via injecting a crafted SQL payload into the name cookie parameter. |
| In the Linux kernel, the following vulnerability has been resolved:
sched/rt: Skip currently executing CPU in rto_next_cpu()
CPU0 becomes overloaded when hosting a CPU-bound RT task, a non-CPU-bound
RT task, and a CFS task stuck in kernel space. When other CPUs switch from
RT to non-RT tasks, RT load balancing (LB) is triggered; with
HAVE_RT_PUSH_IPI enabled, they send IPIs to CPU0 to drive the execution
of rto_push_irq_work_func. During push_rt_task on CPU0,
if next_task->prio < rq->donor->prio, resched_curr() sets NEED_RESCHED
and after the push operation completes, CPU0 calls rto_next_cpu().
Since only CPU0 is overloaded in this scenario, rto_next_cpu() should
ideally return -1 (no further IPI needed).
However, multiple CPUs invoking tell_cpu_to_push() during LB increments
rd->rto_loop_next. Even when rd->rto_cpu is set to -1, the mismatch between
rd->rto_loop and rd->rto_loop_next forces rto_next_cpu() to restart its
search from -1. With CPU0 remaining overloaded (satisfying rt_nr_migratory
&& rt_nr_total > 1), it gets reselected, causing CPU0 to queue irq_work to
itself and send self-IPIs repeatedly. As long as CPU0 stays overloaded and
other CPUs run pull_rt_tasks(), it falls into an infinite self-IPI loop,
which triggers a CPU hardlockup due to continuous self-interrupts.
The trigging scenario is as follows:
cpu0 cpu1 cpu2
pull_rt_task
tell_cpu_to_push
<------------irq_work_queue_on
rto_push_irq_work_func
push_rt_task
resched_curr(rq) pull_rt_task
rto_next_cpu tell_cpu_to_push
<-------------------------- atomic_inc(rto_loop_next)
rd->rto_loop != next
rto_next_cpu
irq_work_queue_on
rto_push_irq_work_func
Fix redundant self-IPI by filtering the initiating CPU in rto_next_cpu().
This solution has been verified to effectively eliminate spurious self-IPIs
and prevent CPU hardlockup scenarios. |
| Budibase is an open-source low-code platform. Prior to 3.38.1, the row action trigger endpoint (POST /api/tables/:sourceId/actions/:actionId/trigger) fails to validate that the user-supplied rowId is within the scope of the view's row filters. A user with access to a filtered view can trigger row actions on any row in the underlying table, including rows explicitly excluded by the view's security filters. This vulnerability is fixed in 3.38.1. |
| In the Linux kernel, the following vulnerability has been resolved:
net/mlx5e: Fix deadlocks between devlink and netdev instance locks
In the mentioned "Fixes" commit, various work tasks triggering devlink
health reporter recovery were switched to use netdev_trylock to protect
against concurrent tear down of the channels being recovered. But this
had the side effect of introducing potential deadlocks because of
incorrect lock ordering.
The correct lock order is described by the init flow:
probe_one -> mlx5_init_one (acquires devlink lock)
-> mlx5_init_one_devl_locked -> mlx5_register_device
-> mlx5_rescan_drivers_locked -...-> mlx5e_probe -> _mlx5e_probe
-> register_netdev (acquires rtnl lock)
-> register_netdevice (acquires netdev lock)
=> devlink lock -> rtnl lock -> netdev lock.
But in the current recovery flow, the order is wrong:
mlx5e_tx_err_cqe_work (acquires netdev lock)
-> mlx5e_reporter_tx_err_cqe -> mlx5e_health_report
-> devlink_health_report (acquires devlink lock => boom!)
-> devlink_health_reporter_recover
-> mlx5e_tx_reporter_recover -> mlx5e_tx_reporter_recover_from_ctx
-> mlx5e_tx_reporter_err_cqe_recover
The same pattern exists in:
mlx5e_reporter_rx_timeout
mlx5e_reporter_tx_ptpsq_unhealthy
mlx5e_reporter_tx_timeout
Fix these by moving the netdev_trylock calls from the work handlers
lower in the call stack, in the respective recovery functions, where
they are actually necessary. |
| In the Linux kernel, the following vulnerability has been resolved:
net: stmmac: fix oops when split header is enabled
For GMAC4, when split header is enabled, in some rare cases, the
hardware does not fill buf2 of the first descriptor with payload.
Thus we cannot assume buf2 is always fully filled if it is not
the last descriptor. Otherwise, the length of buf2 of the second
descriptor will be calculated wrong and cause an oops:
Unable to handle kernel paging request at virtual address ffff00019246bfc0
...
x2 : 0000000000000040 x1 : ffff00019246bfc0 x0 : ffff00009246c000
Call trace:
dcache_inval_poc+0x28/0x58 (P)
dma_direct_sync_single_for_cpu+0x38/0x6c
__dma_sync_single_for_cpu+0x34/0x6c
stmmac_napi_poll_rx+0x8f0/0xb60
__napi_poll.constprop.0+0x30/0x144
net_rx_action+0x160/0x274
handle_softirqs+0x1b8/0x1fc
...
To fix this, the PL bit-field in RDES3 register is used for all
descriptors, whether it is the last descriptor or not. |
| A weakness has been identified in CodeAstro Leave Management System 1.0. The affected element is an unknown function of the file /admin/add_staff.php. Executing a manipulation of the argument email_id can lead to sql injection. The attack can be launched remotely. The exploit has been made available to the public and could be used for attacks. |
| A vulnerability has been found in itsourcecode Electronic Judging System 1.0. This affects an unknown part of the file /admin/edit_judge.php. The manipulation of the argument judge_id leads to sql injection. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. |
