| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A vulnerability in synotheme_upload.php in Synology Photo Station before 6.7.3-3432 and 6.3-2967 allows remote attackers to upload arbitrary files without authentication via the logo_upload action. |
| Comcast XFINITY WiFi Home Hotspot devices allow remote attackers to spoof the identities of Comcast customers via a forged MAC address. |
| An Improper Authentication issue was discovered in PDQ Manufacturing LaserWash G5 and G5 S Series all versions, LaserWash M5, all versions, LaserWash 360 and 360 Plus, all versions, LaserWash AutoXpress and AutoExpress Plus, all versions, LaserJet, all versions, ProTouch Tandem, all versions, ProTouch ICON, all versions, and ProTouch AutoGloss, all versions. The web server does not properly verify that provided authentication information is correct. |
| Remote manipulations with language pack updater lead to NTLM-relay attack for system user in Gemalto's HASP SRM, Sentinel HASP and Sentinel LDK products prior to Sentinel LDK RTE version 7.55. |
| An Authentication Bypass vulnerability in Cisco WebEx Meetings Server could allow an unauthenticated, remote attacker to access limited meeting information on the Cisco WebEx Meetings Server. More Information: CSCvd50728. Known Affected Releases: 2.6 2.7 2.8 CWMS-2.5MR1 Orion1.1.2.patch T29_orion_merge. |
| An issue was discovered in ABOOT in OnePlus 3 and 3T OxygenOS before 4.0.2. The attacker can reboot the device into the fastboot mode, which could be done without any authentication. A physical attacker can press the "Volume Up" button during device boot, where an attacker with ADB access can issue the adb reboot bootloader command. Then, the attacker can put the platform's SELinux in permissive mode, which severely weakens it, by issuing: fastboot oem selinux permissive. |
| An issue was discovered in Kabona AB WebDatorCentral (WDC) application prior to Version 3.4.0. WDC does not limit authentication attempts that may allow a brute force attack method. |
| A vulnerability in the implementation of Protected Extensible Authentication Protocol (PEAP) functionality for standalone configurations of Cisco Aironet 1800, 2800, and 3800 Series Access Points could allow an unauthenticated, adjacent attacker to bypass authentication and connect to an affected device. The vulnerability exists because the affected device uses an incorrect default configuration setting of fail open when running in standalone mode. An attacker could exploit this vulnerability by attempting to connect to an affected device. A successful exploit could allow the attacker to bypass authentication and connect to the affected device. This vulnerability affects Cisco Aironet 1800, 2800, and 3800 Series Access Points that are running a vulnerable software release and use WLAN configuration settings that include FlexConnect local switching and central authentication with MAC filtering. Cisco Bug IDs: CSCvd46314. |
| A vulnerability in the web console of the Cisco Cloud Services Platform (CSP) 2100 could allow an authenticated, remote attacker to interact maliciously with the services or virtual machines (VMs) operating remotely on an affected CSP device. The vulnerability is due to weaknesses in the generation of certain authentication mechanisms in the URL of the web console. An attacker could exploit this vulnerability by browsing to one of the hosted VMs' URLs in Cisco CSP and viewing specific patterns that control the web application's mechanisms for authentication control. An exploit could allow the attacker to access a specific VM on the CSP, which causes a complete loss of the system's confidentiality, integrity, and availability. This vulnerability affects Cisco Cloud Services Platform (CSP) 2100 running software release 2.1.0, 2.1.1, 2.1.2, 2.2.0, 2.2.1, or 2.2.2. Cisco Bug IDs: CSCve64690. |
| An insufficient authentication vulnerability on platforms where Junos OS instances are run in a virtualized environment, may allow unprivileged users on the Junos OS instance to gain access to the host operating environment, and thus escalate privileges. Affected releases are Juniper Networks Junos OS 14.1X53 prior to 14.1X53-D40 on QFX5110, QFX5200, QFX10002, QFX10008, QFX10016, EX4600 and NFX250; 15.1 prior to 15.1R5 on EX4600; 15.1X49 prior to 15.1X49-D70 on vSRX, SRX1500, SRX4100, SRX4200; 16.1 prior to 16.1R2 on EX4600, ACX5000 series. This issue does not affect vMX. No other Juniper Networks products or platforms are affected by this issue. |
| Salt before 2015.5.10 and 2015.8.x before 2015.8.8, when PAM external authentication is enabled, allows attackers to bypass the configured authentication service by passing an alternate service with a command sent to LocalClient. |
| A design flaw in authentication in Synology Photo Station 6.0-2528 through 6.7.1-3419 allows local users to obtain credentials via cmdline. Synology Photo Station employs the synophoto_dsm_user program to authenticate username and password by "synophoto_dsm_user --auth USERNAME PASSWORD", and local users are able to obtain credentials by sniffing "/proc/*/cmdline". |
| A vulnerability in the mesh code of Cisco Wireless LAN Controller (WLC) software could allow an unauthenticated, remote attacker to impersonate a WLC in a meshed topology. The vulnerability is due to insufficient authentication of the parent access point in a mesh configuration. An attacker could exploit this vulnerability by forcing the target system to disconnect from the correct parent access point and reconnect to a rogue access point owned by the attacker. An exploit could allow the attacker to control the traffic flowing through the impacted access point or take full control of the target system. This vulnerability affects the following products running a vulnerable version of Wireless LAN Controller software and configured for meshed mode: Cisco 8500 Series Wireless Controller, Cisco 5500 Series Wireless Controller, Cisco 2500 Series Wireless Controller, Cisco Flex 7500 Series Wireless Controller, Cisco Virtual Wireless Controller, Wireless Services Module 2 (WiSM2). Note that additional configuration is needed in addition to upgrading to a fixed release. Cisco Bug IDs: CSCuc98992 CSCuu14804. |
| Apache Solr uses a PKI based mechanism to secure inter-node communication when security is enabled. It is possible to create a specially crafted node name that does not exist as part of the cluster and point it to a malicious node. This can trick the nodes in cluster to believe that the malicious node is a member of the cluster. So, if Solr users have enabled BasicAuth authentication mechanism using the BasicAuthPlugin or if the user has implemented a custom Authentication plugin, which does not implement either "HttpClientInterceptorPlugin" or "HttpClientBuilderPlugin", his/her servers are vulnerable to this attack. Users who only use SSL without basic authentication or those who use Kerberos are not affected. |
| Apache Solr's Kerberos plugin can be configured to use delegation tokens, which allows an application to reuse the authentication of an end-user or another application. There are two issues with this functionality (when using SecurityAwareZkACLProvider type of ACL provider e.g. SaslZkACLProvider). Firstly, access to the security configuration can be leaked to users other than the solr super user. Secondly, malicious users can exploit this leaked configuration for privilege escalation to further expose/modify private data and/or disrupt operations in the Solr cluster. The vulnerability is fixed from Apache Solr 6.6.1 onwards. |
| Some Huawei smart phones with software Berlin-L21C10B130,Berlin-L21C185B133,Berlin-L21HNC10B131,Berlin-L21HNC185B140,Berlin-L21HNC432B151,Berlin-L22C636B160,Berlin-L22HNC636B130,Berlin-L22HNC675B150CUSTC675D001,Berlin-L23C605B131,Berlin-L24HNC567B110,FRD-L02C432B120,FRD-L02C635B130,FRD-L02C675B170CUSTC675D001,FRD-L04C567B162,FRD-L04C605B131,FRD-L09C10B130,FRD-L09C185B130,FRD-L09C432B131,FRD-L09C636B130,FRD-L14C567B162,FRD-L19C10B130,FRD-L19C432B131,FRD-L19C636B130 have a factory Reset Protection (FRP) bypass security vulnerability. When re-configuring the mobile phone using the factory reset protection (FRP) function, an attacker can login the configuration flow by Swype Keyboard and can perform some operations to update the Google account. As a result, the FRP function is bypassed. |
| The IBM Tivoli Storage Manager (IBM Spectrum Protect 7.1 and 8.1) default authentication protocol is vulnerable to a brute force attack due to disclosing too much information during authentication. An attacker could gain user or administrative access to the TSM server. IBM X-Force ID: 118750. |
| IBM Emptoris Strategic Supply Management Platform 10.0.0.x through 10.1.1.x is vulnerable to a denial of service attack. An attacker can exploit a vulnerability in the authentication features that could log out users and flood user accounts with emails. IBM X-Force ID: 118838. |
| SYN Flood or FIN Flood attack in ECos 1 and other versions embedded devices results in web Authentication Bypass. "eCos Embedded Web Servers used by Multiple Routers and Home devices, while sending SYN Flood or FIN Flood packets fails to validate and handle the packets and does not ask for any sign of authentication resulting in Authentication Bypass. An attacker can take complete advantage of this bug and take over the device remotely or locally. The bug has been successfully tested and reproduced in some versions of SOHO Routers manufactured by TOTOLINK, GREATEK and others." |
| An issue was discovered in Zammad before 1.0.4, 1.1.x before 1.1.3, and 1.2.x before 1.2.1. Attackers can login with the hashed password itself (e.g., from the DB) instead of the valid password string. |
