| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Cisco Catalyst LAN switches running Catalyst 5000 supervisor software allows remote attackers to perform a denial of service by forcing the supervisor module to reload. |
| Cisco Firewall Services Module (FWSM) in Cisco Catalyst 6500 and 7600 series devices allows remote attackers to cause a denial of service (crash and reload) via an SNMPv3 message when snmp-server is set. |
| Cisco Catalyst 2900 Virtual LAN (VLAN) switches allow remote attackers to inject 802.1q frames into another VLAN by forging the VLAN identifier in the trunking tag. |
| The web configuration interface for Catalyst 3500 XL switches allows remote attackers to execute arbitrary commands without authentication when the enable password is not set, via a URL containing the /exec/ directory. |
| Cisco Catalyst 2900XL switch allows a remote attacker to create a denial of service via an empty UDP packet sent to port 161 (SNMP) when SNMP is disabled. |
| Multiple Cisco networking products allow remote attackers to cause a denial of service on the local network via a series of ARP packets sent to the router's interface that contains a different MAC address for the router, which eventually causes the router to overwrite the MAC address in its ARP table. |
| The Cisco Optical Service Module (OSM) for the Catalyst 6500 and 7600 series running Cisco IOS 12.1(8)E through 12.1(13.4)E allows remote attackers to cause a denial of service (hang) via a malformed packet. |
| A vulnerability in the file system permissions of Cisco IOS XE Software could allow an authenticated, local attacker to obtain read and write access to critical configuration or system files. The vulnerability is due to insufficient file system permissions on an affected device. An attacker could exploit this vulnerability by connecting to an affected device's guest shell, and accessing or modifying restricted files. A successful exploit could allow the attacker to view or modify restricted information or configurations that are normally not accessible to system administrators. |
| A vulnerability in Simple Network Management Protocol (SNMP) trap generation for wireless clients of the Cisco IOS XE Wireless Controller Software for the Cisco Catalyst 9000 Family could allow an unauthenticated, adjacent attacker to cause the device to unexpectedly reload, causing a denial of service (DoS) condition on an affected device. The vulnerability is due to the lack of input validation of the information used to generate an SNMP trap in relation to a wireless client connection. An attacker could exploit this vulnerability by sending an 802.1x packet with crafted parameters during the wireless authentication setup phase of a connection. A successful exploit could allow the attacker to cause the device to reload, causing a DoS condition. |
| A vulnerability in the application-hosting subsystem of Cisco IOS XE Software could allow an authenticated, local attacker to elevate privileges to root on an affected device. The attacker could execute IOS XE commands outside the application-hosting subsystem Docker container as well as on the underlying Linux operating system. These commands could be run as the root user. The vulnerability is due to a combination of two factors: (a) incomplete input validation of the user payload of CLI commands, and (b) improper role-based access control (RBAC) when commands are issued at the command line within the application-hosting subsystem. An attacker could exploit this vulnerability by using a CLI command with crafted user input. A successful exploit could allow the lower-privileged attacker to execute arbitrary CLI commands with root privileges. The attacker would need valid user credentials to exploit this vulnerability. |
| A vulnerability in the multicast DNS (mDNS) feature of Cisco IOS XE Software for Cisco Catalyst 9800 Series Wireless Controllers could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition. The vulnerability is due to improper validation of mDNS packets. An attacker could exploit this vulnerability by sending a crafted mDNS packet to an affected device. A successful exploit could cause a device to reload, resulting in a DoS condition. |
| A vulnerability in the packet processing functionality of Cisco access point (AP) software could allow an unauthenticated, adjacent attacker to exhaust resources on an affected device.
This vulnerability is due to insufficient management of resources when handling certain types of traffic. An attacker could exploit this vulnerability by sending a series of specific wireless packets to an affected device. A successful exploit could allow the attacker to consume resources on an affected device. A sustained attack could lead to the disruption of the Control and Provisioning of Wireless Access Points (CAPWAP) tunnel and intermittent loss of wireless client traffic. |
| A vulnerability in the Internet Group Management Protocol (IGMP) packet-processing functionality of Cisco IOS XE Software could allow an unauthenticated, adjacent attacker to exhaust buffers on an affected device, resulting in a denial of service (DoS) condition, aka a Memory Leak. The vulnerability is due to the affected software insufficiently processing IGMP Membership Query packets that are sent to an affected device. An attacker could exploit this vulnerability by sending a large number of IGMP Membership Query packets, which contain certain values, to an affected device. A successful exploit could allow the attacker to exhaust buffers on the affected device, resulting in a DoS condition that requires the device to be reloaded manually. This vulnerability affects: Cisco Catalyst 4500 Switches with Supervisor Engine 8-E, if they are running Cisco IOS XE Software Release 3.x.x.E and IP multicast routing is configured; Cisco devices that are running Cisco IOS XE Software Release 16.x, if IP multicast routing is configured. Cisco Bug IDs: CSCuw09295, CSCve94496. |
| A vulnerability in the IP Version 4 (IPv4) processing code of Cisco IOS XE Software running on Cisco Catalyst 3850 and Cisco Catalyst 3650 Series Switches could allow an unauthenticated, remote attacker to cause high CPU utilization, traceback messages, or a reload of an affected device that leads to a denial of service (DoS) condition. The vulnerability is due to incorrect processing of certain IPv4 packets. An attacker could exploit this vulnerability by sending specific IPv4 packets to an IPv4 address on an affected device. A successful exploit could allow the attacker to cause high CPU utilization, traceback messages, or a reload of the affected device that leads to a DoS condition. If the switch does not reboot when under attack, it would require manual intervention to reload the device. This vulnerability affects Cisco Catalyst 3850 and Cisco Catalyst 3650 Series Switches that are running Cisco IOS XE Software Release 16.1.1 or later, until the first fixed release, and are configured with an IPv4 address. Cisco Bug IDs: CSCvd80714. |
| Multiple vulnerabilities in the Application Layer Protocol Inspection feature of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to trigger a reload of an affected device, resulting in a denial of service (DoS) condition. The vulnerabilities are due to logical errors during traffic inspection. An attacker could exploit these vulnerabilities by sending a high volume of malicious traffic across an affected device. An exploit could allow the attacker to cause a deadlock condition, resulting in a reload of an affected device. These vulnerabilities affect Cisco ASA Software and Cisco FTD Software configured for Application Layer Protocol Inspection running on the following Cisco products: 3000 Series Industrial Security Appliance (ISA), ASA 5500 Series Adaptive Security Appliances, ASA 5500-X Series Next-Generation Firewalls, ASA Services Module for Cisco Catalyst 6500 Series Switches and Cisco 7600 Series Routers, Adaptive Security Virtual Appliance (ASAv), Firepower 2100 Series Security Appliance, Firepower 4100 Series Security Appliance, Firepower 9300 ASA Security Module, FTD Virtual (FTDv). Cisco Bug IDs: CSCve61540, CSCvh23085, CSCvh95456. |
| A vulnerability in the Wireless Network Control daemon (wncd) of Cisco IOS XE Software for Wireless LAN Controllers could allow an unauthenticated, adjacent attacker to cause a denial of service (DoS) condition.
This vulnerability is due to improper memory management. An attacker could exploit this vulnerability by sending a series of network requests to an affected device. A successful exploit could allow the attacker to cause the wncd process to consume available memory and eventually cause the device to reload, resulting in a DoS condition. |
| A vulnerability in the TCP socket code of Cisco IOS and IOS XE Software could allow an unauthenticated, remote attacker to cause an affected device to reload. The vulnerability is due to a state condition between the socket state and the transmission control block (TCB) state. While this vulnerability potentially affects all TCP applications, the only affected application observed so far is the HTTP server. An attacker could exploit this vulnerability by sending specific HTTP requests at a sustained rate to a reachable IP address of the affected software. A successful exploit could allow the attacker to cause the affected device to reload, resulting in a denial of service (DoS) condition on an affected device. |
| Multiple vulnerabilities in the web-based user interface (Web UI) of Cisco IOS XE Software could allow an authenticated, remote attacker to execute commands with elevated privileges on the affected device. For more information about these vulnerabilities, see the Details section of this advisory. |
| A vulnerability in the Cisco TrustSec (CTS) Protected Access Credential (PAC) provisioning module of Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause a reload of an affected device, resulting in a denial of service (DoS) condition. The vulnerability is due to improper validation of attributes in RADIUS messages. An attacker could exploit this vulnerability by sending a malicious RADIUS message to an affected device while the device is in a specific state. |
| A vulnerability in the RADIUS Change of Authorization (CoA) code of Cisco TrustSec, a feature within Cisco IOS XE Software, could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. The vulnerability is due to improper handling of a malformed packet. An attacker could exploit this vulnerability by sending a malformed packet to an affected device. A successful exploit could allow the attacker to cause a DoS condition on the affected device. |
