| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
usb: gadget: f_hid: fix f_hidg lifetime vs cdev
The embedded struct cdev does not have its lifetime correctly tied to
the enclosing struct f_hidg, so there is a use-after-free if /dev/hidgN
is held open while the gadget is deleted.
This can readily be replicated with libusbgx's example programs (for
conciseness - operating directly via configfs is equivalent):
gadget-hid
exec 3<> /dev/hidg0
gadget-vid-pid-remove
exec 3<&-
Pull the existing device up in to struct f_hidg and make use of the
cdev_device_{add,del}() helpers. This changes the lifetime of the
device object to match struct f_hidg, but note that it is still added
and deleted at the same time. |
| In the Linux kernel, the following vulnerability has been resolved:
fs: jfs: fix shift-out-of-bounds in dbAllocAG
Syzbot found a crash : UBSAN: shift-out-of-bounds in dbAllocAG. The
underlying bug is the missing check of bmp->db_agl2size. The field can
be greater than 64 and trigger the shift-out-of-bounds.
Fix this bug by adding a check of bmp->db_agl2size in dbMount since this
field is used in many following functions. The upper bound for this
field is L2MAXL2SIZE - L2MAXAG, thanks for the help of Dave Kleikamp.
Note that, for maintenance, I reorganized error handling code of dbMount. |
| In the Linux kernel, the following vulnerability has been resolved:
mtd: Fix device name leak when register device failed in add_mtd_device()
There is a kmemleak when register device failed:
unreferenced object 0xffff888101aab550 (size 8):
comm "insmod", pid 3922, jiffies 4295277753 (age 925.408s)
hex dump (first 8 bytes):
6d 74 64 30 00 88 ff ff mtd0....
backtrace:
[<00000000bde26724>] __kmalloc_node_track_caller+0x4e/0x150
[<000000003c32b416>] kvasprintf+0xb0/0x130
[<000000001f7a8f15>] kobject_set_name_vargs+0x2f/0xb0
[<000000006e781163>] dev_set_name+0xab/0xe0
[<00000000e30d0c78>] add_mtd_device+0x4bb/0x700
[<00000000f3d34de7>] mtd_device_parse_register+0x2ac/0x3f0
[<00000000c0d88488>] 0xffffffffa0238457
[<00000000b40d0922>] 0xffffffffa02a008f
[<0000000023d17b9d>] do_one_initcall+0x87/0x2a0
[<00000000770f6ca6>] do_init_module+0xdf/0x320
[<000000007b6768fe>] load_module+0x2f98/0x3330
[<00000000346bed5a>] __do_sys_finit_module+0x113/0x1b0
[<00000000674c2290>] do_syscall_64+0x35/0x80
[<000000004c6a8d97>] entry_SYSCALL_64_after_hwframe+0x46/0xb0
If register device failed, should call put_device() to give up the
reference. |
| In the Linux kernel, the following vulnerability has been resolved:
s390/netiucv: Fix return type of netiucv_tx()
With clang's kernel control flow integrity (kCFI, CONFIG_CFI_CLANG),
indirect call targets are validated against the expected function
pointer prototype to make sure the call target is valid to help mitigate
ROP attacks. If they are not identical, there is a failure at run time,
which manifests as either a kernel panic or thread getting killed. A
proposed warning in clang aims to catch these at compile time, which
reveals:
drivers/s390/net/netiucv.c:1854:21: error: incompatible function pointer types initializing 'netdev_tx_t (*)(struct sk_buff *, struct net_device *)' (aka 'enum netdev_tx (*)(struct sk_buff *, struct net_device *)') with an expression of type 'int (struct sk_buff *, struct net_device *)' [-Werror,-Wincompatible-function-pointer-types-strict]
.ndo_start_xmit = netiucv_tx,
^~~~~~~~~~
->ndo_start_xmit() in 'struct net_device_ops' expects a return type of
'netdev_tx_t', not 'int'. Adjust the return type of netiucv_tx() to
match the prototype's to resolve the warning and potential CFI failure,
should s390 select ARCH_SUPPORTS_CFI_CLANG in the future.
Additionally, while in the area, remove a comment block that is no
longer relevant. |
| In the Linux kernel, the following vulnerability has been resolved:
dm thin: Fix UAF in run_timer_softirq()
When dm_resume() and dm_destroy() are concurrent, it will
lead to UAF, as follows:
BUG: KASAN: use-after-free in __run_timers+0x173/0x710
Write of size 8 at addr ffff88816d9490f0 by task swapper/0/0
<snip>
Call Trace:
<IRQ>
dump_stack_lvl+0x73/0x9f
print_report.cold+0x132/0xaa2
_raw_spin_lock_irqsave+0xcd/0x160
__run_timers+0x173/0x710
kasan_report+0xad/0x110
__run_timers+0x173/0x710
__asan_store8+0x9c/0x140
__run_timers+0x173/0x710
call_timer_fn+0x310/0x310
pvclock_clocksource_read+0xfa/0x250
kvm_clock_read+0x2c/0x70
kvm_clock_get_cycles+0xd/0x20
ktime_get+0x5c/0x110
lapic_next_event+0x38/0x50
clockevents_program_event+0xf1/0x1e0
run_timer_softirq+0x49/0x90
__do_softirq+0x16e/0x62c
__irq_exit_rcu+0x1fa/0x270
irq_exit_rcu+0x12/0x20
sysvec_apic_timer_interrupt+0x8e/0xc0
One of the concurrency UAF can be shown as below:
use free
do_resume |
__find_device_hash_cell |
dm_get |
atomic_inc(&md->holders) |
| dm_destroy
| __dm_destroy
| if (!dm_suspended_md(md))
| atomic_read(&md->holders)
| msleep(1)
dm_resume |
__dm_resume |
dm_table_resume_targets |
pool_resume |
do_waker #add delay work |
dm_put |
atomic_dec(&md->holders) |
| dm_table_destroy
| pool_dtr
| __pool_dec
| __pool_destroy
| destroy_workqueue
| kfree(pool) # free pool
time out
__do_softirq
run_timer_softirq # pool has already been freed
This can be easily reproduced using:
1. create thin-pool
2. dmsetup suspend pool
3. dmsetup resume pool
4. dmsetup remove_all # Concurrent with 3
The root cause of this UAF bug is that dm_resume() adds timer after
dm_destroy() skips cancelling the timer because of suspend status.
After timeout, it will call run_timer_softirq(), however pool has
already been freed. The concurrency UAF bug will happen.
Therefore, cancelling timer again in __pool_destroy(). |
| In the Linux kernel, the following vulnerability has been resolved:
tpm: acpi: Call acpi_put_table() to fix memory leak
The start and length of the event log area are obtained from
TPM2 or TCPA table, so we call acpi_get_table() to get the
ACPI information, but the acpi_get_table() should be coupled with
acpi_put_table() to release the ACPI memory, add the acpi_put_table()
properly to fix the memory leak.
While we are at it, remove the redundant empty line at the
end of the tpm_read_log_acpi(). |
| In the Linux kernel, the following vulnerability has been resolved:
iio: fix memory leak in iio_device_register_eventset()
When iio_device_register_sysfs_group() returns failed,
iio_device_register_eventset() needs to free attrs array.
Otherwise, kmemleak would scan & report memory leak as below:
unreferenced object 0xffff88810a1cc3c0 (size 32):
comm "100-i2c-vcnl302", pid 728, jiffies 4295052307 (age 156.027s)
backtrace:
__kmalloc+0x46/0x1b0
iio_device_register_eventset at drivers/iio/industrialio-event.c:541
__iio_device_register at drivers/iio/industrialio-core.c:1959
__devm_iio_device_register at drivers/iio/industrialio-core.c:2040 |
| In the Linux kernel, the following vulnerability has been resolved:
clk: imx: scu: fix memleak on platform_device_add() fails
No error handling is performed when platform_device_add()
fails. Add error processing before return, and modified
the return value. |
| In the Linux kernel, the following vulnerability has been resolved:
regmap-irq: Use the new num_config_regs property in regmap_add_irq_chip_fwnode
Commit faa87ce9196d ("regmap-irq: Introduce config registers for irq
types") added the num_config_regs, then commit 9edd4f5aee84 ("regmap-irq:
Deprecate type registers and virtual registers") suggested to replace
num_type_reg with it. However, regmap_add_irq_chip_fwnode wasn't modified
to use the new property. Later on, commit 255a03bb1bb3 ("ASoC: wcd9335:
Convert irq chip to config regs") removed the old num_type_reg property
from the WCD9335 driver's struct regmap_irq_chip, causing a null pointer
dereference in regmap_irq_set_type when it tried to index d->type_buf as
it was never allocated in regmap_add_irq_chip_fwnode:
[ 39.199374] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000
[ 39.200006] Call trace:
[ 39.200014] regmap_irq_set_type+0x84/0x1c0
[ 39.200026] __irq_set_trigger+0x60/0x1c0
[ 39.200040] __setup_irq+0x2f4/0x78c
[ 39.200051] request_threaded_irq+0xe8/0x1a0
Use num_config_regs in regmap_add_irq_chip_fwnode instead of num_type_reg,
and fall back to it if num_config_regs isn't defined to maintain backward
compatibility. |
| In the Linux kernel, the following vulnerability has been resolved:
pinctrl: thunderbay: fix possible memory leak in thunderbay_build_functions()
The thunderbay_add_functions() will free memory of thunderbay_funcs
when everything is ok, but thunderbay_funcs will not be freed when
thunderbay_add_functions() fails, then there will be a memory leak,
so we need to add kfree() when thunderbay_add_functions() fails to
fix it.
In addition, doing some cleaner works, moving kfree(funcs) from
thunderbay_add_functions() to thunderbay_build_functions(). |
| In the Linux kernel, the following vulnerability has been resolved:
drm: Fix potential null-ptr-deref due to drmm_mode_config_init()
drmm_mode_config_init() will call drm_mode_create_standard_properties()
and won't check the ret value. When drm_mode_create_standard_properties()
failed due to alloc, property will be a NULL pointer and may causes the
null-ptr-deref. Fix the null-ptr-deref by adding the ret value check.
Found null-ptr-deref while testing insert module bochs:
general protection fault, probably for non-canonical address
0xdffffc000000000c: 0000 [#1] SMP KASAN PTI
KASAN: null-ptr-deref in range [0x0000000000000060-0x0000000000000067]
CPU: 3 PID: 249 Comm: modprobe Not tainted 6.1.0-rc1+ #364
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
rel-1.15.0-0-g2dd4b9b3f840-prebuilt.qemu.org 04/01/2014
RIP: 0010:drm_object_attach_property+0x73/0x3c0 [drm]
Call Trace:
<TASK>
__drm_connector_init+0xb6c/0x1100 [drm]
bochs_pci_probe.cold.11+0x4cb/0x7fe [bochs]
pci_device_probe+0x17d/0x340
really_probe+0x1db/0x5d0
__driver_probe_device+0x1e7/0x250
driver_probe_device+0x4a/0x120
__driver_attach+0xcd/0x2c0
bus_for_each_dev+0x11a/0x1b0
bus_add_driver+0x3d7/0x500
driver_register+0x18e/0x320
do_one_initcall+0xc4/0x3e0
do_init_module+0x1b4/0x630
load_module+0x5dca/0x7230
__do_sys_finit_module+0x100/0x170
do_syscall_64+0x3f/0x90
entry_SYSCALL_64_after_hwframe+0x63/0xcd
RIP: 0033:0x7ff65af9f839 |
| A vulnerability in danny-avila/librechat version 0.7.9 allows for HTML injection via the Accept-Language header. When a logged-in user sends an HTTP GET request with a crafted Accept-Language header, arbitrary HTML can be injected into the <html lang=""> tag of the response. This can lead to potential security risks such as cross-site scripting (XSS) attacks. |
| The All in One Time Clock Lite – Tracking Employee Time Has Never Been Easier plugin for WordPress is vulnerable to Insecure Direct Object Reference in all versions up to, and including, 2.0 via the 'aio_time_clock_lite_js' AJAX action due to missing validation on a user controlled key. This makes it possible for authenticated attackers, with subscriber access and above, to clock other users in and out. |
| Incorrect Default Permissions vulnerability in The Wikimedia Foundation Mediawiki - Thanks Extension, Mediawiki - Growth Experiments Extension allows Accessing Functionality Not Properly Constrained by ACLs.This issue affects Mediawiki - Thanks Extension, Mediawiki - Growth Experiments Extension: from 1.43 before 1.44. |
| Vulnerability in the Oracle VM VirtualBox product of Oracle Virtualization (component: Core). Supported versions that are affected are 7.1.12 and 7.2.2. Easily exploitable vulnerability allows high privileged attacker with logon to the infrastructure where Oracle VM VirtualBox executes to compromise Oracle VM VirtualBox. While the vulnerability is in Oracle VM VirtualBox, attacks may significantly impact additional products (scope change). Successful attacks of this vulnerability can result in takeover of Oracle VM VirtualBox. CVSS 3.1 Base Score 8.2 (Confidentiality, Integrity and Availability impacts). CVSS Vector: (CVSS:3.1/AV:L/AC:L/PR:H/UI:N/S:C/C:H/I:H/A:H). |
| Vulnerability in the Oracle VM VirtualBox product of Oracle Virtualization (component: Core). Supported versions that are affected are 7.1.12 and 7.2.2. Easily exploitable vulnerability allows high privileged attacker with logon to the infrastructure where Oracle VM VirtualBox executes to compromise Oracle VM VirtualBox. While the vulnerability is in Oracle VM VirtualBox, attacks may significantly impact additional products (scope change). Successful attacks of this vulnerability can result in unauthorized access to critical data or complete access to all Oracle VM VirtualBox accessible data. CVSS 3.1 Base Score 6.0 (Confidentiality impacts). CVSS Vector: (CVSS:3.1/AV:L/AC:L/PR:H/UI:N/S:C/C:H/I:N/A:N). |
| Vulnerability in the Oracle VM VirtualBox product of Oracle Virtualization (component: Core). Supported versions that are affected are 7.1.12 and 7.2.2. Easily exploitable vulnerability allows high privileged attacker with logon to the infrastructure where Oracle VM VirtualBox executes to compromise Oracle VM VirtualBox. While the vulnerability is in Oracle VM VirtualBox, attacks may significantly impact additional products (scope change). Successful attacks of this vulnerability can result in takeover of Oracle VM VirtualBox. CVSS 3.1 Base Score 8.2 (Confidentiality, Integrity and Availability impacts). CVSS Vector: (CVSS:3.1/AV:L/AC:L/PR:H/UI:N/S:C/C:H/I:H/A:H). |
| Vulnerability in the Oracle VM VirtualBox product of Oracle Virtualization (component: Core). Supported versions that are affected are 7.1.12 and 7.2.2. Easily exploitable vulnerability allows high privileged attacker with logon to the infrastructure where Oracle VM VirtualBox executes to compromise Oracle VM VirtualBox. While the vulnerability is in Oracle VM VirtualBox, attacks may significantly impact additional products (scope change). Successful attacks of this vulnerability can result in takeover of Oracle VM VirtualBox. CVSS 3.1 Base Score 8.2 (Confidentiality, Integrity and Availability impacts). CVSS Vector: (CVSS:3.1/AV:L/AC:L/PR:H/UI:N/S:C/C:H/I:H/A:H). |
| Vulnerability in the Oracle ZFS Storage Appliance Kit product of Oracle Systems (component: Naming Subsystem). The supported version that is affected is 8.8. Easily exploitable vulnerability allows high privileged attacker with network access via HTTP to compromise Oracle ZFS Storage Appliance Kit. Successful attacks of this vulnerability can result in unauthorized ability to cause a partial denial of service (partial DOS) of Oracle ZFS Storage Appliance Kit. CVSS 3.1 Base Score 2.7 (Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:H/UI:N/S:U/C:N/I:N/A:L). |
| Vulnerability in the Oracle ZFS Storage Appliance Kit product of Oracle Systems (component: Block Storage). The supported version that is affected is 8.8. Easily exploitable vulnerability allows high privileged attacker with network access via HTTP to compromise Oracle ZFS Storage Appliance Kit. Successful attacks of this vulnerability can result in unauthorized ability to cause a partial denial of service (partial DOS) of Oracle ZFS Storage Appliance Kit. CVSS 3.1 Base Score 2.7 (Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:H/UI:N/S:U/C:N/I:N/A:L). |
