Filtered by vendor Linuxfoundation
Subscriptions
Total
267 CVE
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2022-32590 | 3 Google, Linuxfoundation, Mediatek | 47 Android, Yocto, Mt6761 and 44 more | 2024-08-03 | 6.7 Medium |
| In wlan, there is a possible use after free due to an incorrect status check. This could lead to local escalation of privilege with System execution privileges needed. User interaction is not needed for exploitation. Patch ID: ALPS07299425; Issue ID: ALPS07299425. | ||||
| CVE-2022-32589 | 3 Google, Linuxfoundation, Mediatek | 43 Android, Yocto, Mt6761 and 40 more | 2024-08-03 | 7.5 High |
| In Wi-Fi driver, there is a possible way to disconnect Wi-Fi due to an improper resource release. This could lead to remote denial of service with no additional execution privileges needed. User interaction is not needed for exploitation. Patch ID: ALPS07030600; Issue ID: ALPS07030600. | ||||
| CVE-2022-31079 | 1 Linuxfoundation | 1 Kubeedge | 2024-08-03 | 4.4 Medium |
| KubeEdge is an open source system for extending native containerized application orchestration capabilities to hosts at Edge. Prior to versions 1.11.1, 1.10.2, and 1.9.4, the Cloud Stream server and the Edge Stream server reads the entire message into memory without imposing a limit on the size of this message. An attacker can exploit this by sending a large message to exhaust memory and cause a DoS. The Cloud Stream server and the Edge Stream server are under DoS attack in this case. The consequence of the exhaustion is that the CloudCore and EdgeCore will be in a denial of service. Only an authenticated user can cause this issue. It will be affected only when users enable `cloudStream` module in the config file `cloudcore.yaml` and enable `edgeStream` module in the config file `edgecore.yaml`. This bug has been fixed in Kubeedge 1.11.1, 1.10.2, and 1.9.4. As a workaround, disable cloudStream module in the config file `cloudcore.yaml` and disable edgeStream module in the config file `edgecore.yaml`. | ||||
| CVE-2022-31075 | 1 Linuxfoundation | 1 Kubeedge | 2024-08-03 | 4.9 Medium |
| KubeEdge is an open source system for extending native containerized application orchestration capabilities to hosts at Edge. Prior to versions 1.11.1, 1.10.2, and 1.9.4, EdgeCore may be susceptible to a DoS attack on CloudHub if an attacker was to send a well-crafted HTTP request to `/edge.crt`. If an attacker can send a well-crafted HTTP request to CloudHub, and that request has a very large body, that request can crash the HTTP service through a memory exhaustion vector. The request body is being read into memory, and a body that is larger than the available memory can lead to a successful attack. Because the request would have to make it through authorization, only authorized users may perform this attack. The consequence of the exhaustion is that CloudHub will be in denial of service. KubeEdge is affected only when users enable the CloudHub module in the file `cloudcore.yaml`. This bug has been fixed in Kubeedge 1.11.1, 1.10.2, and 1.9.4. As a workaround, disable the CloudHub switch in the config file `cloudcore.yaml`. | ||||
| CVE-2022-31080 | 1 Linuxfoundation | 1 Kubeedge | 2024-08-03 | 4.4 Medium |
| KubeEdge is an open source system for extending native containerized application orchestration capabilities to hosts at Edge. Prior to versions 1.11.1, 1.10.2, and 1.9.4, a large response received by the viaduct WSClient can cause a DoS from memory exhaustion. The entire body of the response is being read into memory which could allow an attacker to send a request that returns a response with a large body. The consequence of the exhaustion is that the process which invokes a WSClient will be in a denial of service. The software is affected If users who are authenticated to the edge side connect to `cloudhub` from the edge side through WebSocket protocol. This bug has been fixed in Kubeedge 1.11.1, 1.10.2, and 1.9.4. There are currently no known workarounds. | ||||
| CVE-2022-31078 | 1 Linuxfoundation | 1 Kubeedge | 2024-08-03 | 4.4 Medium |
| KubeEdge is an open source system for extending native containerized application orchestration capabilities to hosts at Edge. Prior to versions 1.11.1, 1.10.2, and 1.9.4, the CloudCore Router does not impose a limit on the size of responses to requests made by the REST handler. An attacker could use this weakness to make a request that will return an HTTP response with a large body and cause DoS of CloudCore. In the HTTP Handler API, the rest handler makes a request to a pre-specified handle. The handle will return an HTTP response that is then read into memory. The consequence of the exhaustion is that CloudCore will be in a denial of service. Only an authenticated user of the cloud can make an attack. It will be affected only when users enable `router` module in the config file `cloudcore.yaml`. This bug has been fixed in Kubeedge 1.11.1, 1.10.2, and 1.9.4. As a workaround, disable the router switch in the config file `cloudcore.yaml`. | ||||
| CVE-2022-31073 | 1 Linuxfoundation | 1 Kubeedge | 2024-08-03 | 6.5 Medium |
| KubeEdge is an open source system for extending native containerized application orchestration capabilities to hosts at Edge. Prior to versions 1.11.1, 1.10.2, and 1.9.4, the ServiceBus server on the edge side may be susceptible to a DoS attack if an HTTP request containing a very large Body is sent to it. It is possible for the node to be exhausted of memory. The consequence of the exhaustion is that other services on the node, e.g. other containers, will be unable to allocate memory and thus causing a denial of service. Malicious apps accidentally pulled by users on the host and have the access to send HTTP requests to localhost may make an attack. It will be affected only when users enable the `ServiceBus` module in the config file `edgecore.yaml`. This bug has been fixed in Kubeedge 1.11.1, 1.10.2, and 1.9.4. As a workaround, disable the `ServiceBus` module in the config file `edgecore.yaml`. | ||||
| CVE-2022-31076 | 1 Linuxfoundation | 1 Kubeedge | 2024-08-03 | 4.2 Medium |
| KubeEdge is built upon Kubernetes and extends native containerized application orchestration and device management to hosts at the Edge. In affected versions a malicious message can crash CloudCore by triggering a nil-pointer dereference in the UDS Server. Since the UDS Server only communicates with the CSI Driver on the cloud side, the attack is limited to the local host network. As such, an attacker would already need to be an authenticated user of the Cloud. Additionally it will be affected only when users turn on the unixsocket switch in the config file cloudcore.yaml. This bug has been fixed in Kubeedge 1.11.0, 1.10.1, and 1.9.3. Users should update to these versions to resolve the issue. Users unable to upgrade should sisable the unixsocket switch of CloudHub in the config file cloudcore.yaml. | ||||
| CVE-2022-31077 | 1 Linuxfoundation | 1 Kubeedge | 2024-08-03 | 4 Medium |
| KubeEdge is built upon Kubernetes and extends native containerized application orchestration and device management to hosts at the Edge. In affected versions a malicious message response from KubeEdge can crash the CSI Driver controller server by triggering a nil-pointer dereference panic. As a consequence, the CSI Driver controller will be in denial of service. This bug has been fixed in Kubeedge 1.11.0, 1.10.1, and 1.9.3. Users should update to these versions to resolve the issue. At the time of writing, no workaround exists. | ||||
| CVE-2022-31074 | 1 Linuxfoundation | 1 Kubeedge | 2024-08-03 | 4.5 Medium |
| KubeEdge is an open source system for extending native containerized application orchestration capabilities to hosts at Edge. Prior to versions 1.11.1, 1.10.2, and 1.9.4, several endpoints in the Cloud AdmissionController may be susceptible to a DoS attack if an HTTP request containing a very large Body is sent to it. The consequence of the exhaustion is that the Cloud AdmissionController will be in denial of service. This bug has been fixed in Kubeedge 1.11.1, 1.10.2, and 1.9.4. There is currently no known workaround. | ||||
| CVE-2022-31020 | 1 Linuxfoundation | 1 Indy-node | 2024-08-03 | 8.8 High |
| Indy Node is the server portion of a distributed ledger purpose-built for decentralized identity. In versions 1.12.4 and prior, the `pool-upgrade` request handler in Indy-Node allows an improperly authenticated attacker to remotely execute code on nodes within the network. The `pool-upgrade` request handler in Indy-Node 1.12.5 has been updated to properly authenticate pool-upgrade transactions before any processing is performed by the request handler. The transactions are further sanitized to prevent remote code execution. As a workaround, endorsers should not create DIDs for untrusted users. A vulnerable ledger should configure `auth_rules` to prevent new DIDs from being written to the ledger until the network can be upgraded. | ||||
| CVE-2022-31030 | 3 Debian, Fedoraproject, Linuxfoundation | 3 Debian Linux, Fedora, Containerd | 2024-08-03 | 5.5 Medium |
| containerd is an open source container runtime. A bug was found in the containerd's CRI implementation where programs inside a container can cause the containerd daemon to consume memory without bound during invocation of the `ExecSync` API. This can cause containerd to consume all available memory on the computer, denying service to other legitimate workloads. Kubernetes and crictl can both be configured to use containerd's CRI implementation; `ExecSync` may be used when running probes or when executing processes via an "exec" facility. This bug has been fixed in containerd 1.6.6 and 1.5.13. Users should update to these versions to resolve the issue. Users unable to upgrade should ensure that only trusted images and commands are used. | ||||
| CVE-2022-31006 | 1 Linuxfoundation | 1 Indy-node | 2024-08-03 | 7.5 High |
| indy-node is the server portion of Hyperledger Indy, a distributed ledger purpose-built for decentralized identity. In vulnerable versions of indy-node, an attacker can max out the number of client connections allowed by the ledger, leaving the ledger unable to be used for its intended purpose. However, the ledger content will not be impacted and the ledger will resume functioning after the attack. This attack exploits the trade-off between resilience and availability. Any protection against abusive client connections will also prevent the network being accessed by certain legitimate users. As a result, validator nodes must tune their firewall rules to ensure the right trade-off for their network's expected users. The guidance to network operators for the use of firewall rules in the deployment of Indy networks has been modified to better protect against denial of service attacks by increasing the cost and complexity in mounting such attacks. The mitigation for this vulnerability is not in the Hyperledger Indy code per se, but rather in the individual deployments of Indy. The mitigations should be applied to all deployments of Indy, and are not related to a particular release. | ||||
| CVE-2022-29162 | 3 Fedoraproject, Linuxfoundation, Redhat | 4 Fedora, Runc, Enterprise Linux and 1 more | 2024-08-03 | 5.9 Medium |
| runc is a CLI tool for spawning and running containers on Linux according to the OCI specification. A bug was found in runc prior to version 1.1.2 where `runc exec --cap` created processes with non-empty inheritable Linux process capabilities, creating an atypical Linux environment and enabling programs with inheritable file capabilities to elevate those capabilities to the permitted set during execve(2). This bug did not affect the container security sandbox as the inheritable set never contained more capabilities than were included in the container's bounding set. This bug has been fixed in runc 1.1.2. This fix changes `runc exec --cap` behavior such that the additional capabilities granted to the process being executed (as specified via `--cap` arguments) do not include inheritable capabilities. In addition, `runc spec` is changed to not set any inheritable capabilities in the created example OCI spec (`config.json`) file. | ||||
| CVE-2022-28357 | 1 Linuxfoundation | 1 Nats-server | 2024-08-03 | 9.8 Critical |
| NATS nats-server 2.2.0 through 2.7.4 allows directory traversal because of an unintended path to a management action from a management account. | ||||
| CVE-2022-26475 | 3 Google, Linuxfoundation, Mediatek | 42 Android, Yocto, Mt6761 and 39 more | 2024-08-03 | 6.7 Medium |
| In wlan, there is a possible out of bounds write due to a missing bounds check. This could lead to local escalation of privilege with System execution privileges needed. User interaction is not needed for exploitation. Patch ID: ALPS07310743; Issue ID: ALPS07310743. | ||||
| CVE-2022-25882 | 1 Linuxfoundation | 1 Onnx | 2024-08-03 | 7.5 High |
| Versions of the package onnx before 1.13.0 are vulnerable to Directory Traversal as the external_data field of the tensor proto can have a path to the file which is outside the model current directory or user-provided directory, for example "../../../etc/passwd" | ||||
| CVE-2022-24777 | 1 Linuxfoundation | 1 Grpc Swift | 2024-08-03 | 7.5 High |
| grpc-swift is the Swift language implementation of gRPC, a remote procedure call (RPC) framework. Prior to version 1.7.2, a grpc-swift server is vulnerable to a denial of service attack via a reachable assertion. This is due to incorrect logic when handling GOAWAY frames. The attack is low-effort: it takes very little resources to construct and send the required sequence of frames. The impact on availability is high as the server will crash, dropping all in flight connections and requests. This issue is fixed in version 1.7.2. There are currently no known workarounds. | ||||
| CVE-2022-24778 | 3 Fedoraproject, Linuxfoundation, Redhat | 5 Fedora, Imgcrypt, Acm and 2 more | 2024-08-03 | 7.5 High |
| The imgcrypt library provides API exensions for containerd to support encrypted container images and implements the ctd-decoder command line tool for use by containerd to decrypt encrypted container images. The imgcrypt function `CheckAuthorization` is supposed to check whether the current used is authorized to access an encrypted image and prevent the user from running an image that another user previously decrypted on the same system. In versions prior to 1.1.4, a failure occurs when an image with a ManifestList is used and the architecture of the local host is not the first one in the ManifestList. Only the first architecture in the list was tested, which may not have its layers available locally since it could not be run on the host architecture. Therefore, the verdict on unavailable layers was that the image could be run anticipating that image run failure would occur later due to the layers not being available. However, this verdict to allow the image to run enabled other architectures in the ManifestList to run an image without providing keys if that image had previously been decrypted. A patch has been applied to imgcrypt 1.1.4. Workarounds may include usage of different namespaces for each remote user. | ||||
| CVE-2022-24769 | 6 Debian, Fedoraproject, Linux and 3 more | 6 Debian Linux, Fedora, Linux Kernel and 3 more | 2024-08-03 | 5.9 Medium |
| Moby is an open-source project created by Docker to enable and accelerate software containerization. A bug was found in Moby (Docker Engine) prior to version 20.10.14 where containers were incorrectly started with non-empty inheritable Linux process capabilities, creating an atypical Linux environment and enabling programs with inheritable file capabilities to elevate those capabilities to the permitted set during `execve(2)`. Normally, when executable programs have specified permitted file capabilities, otherwise unprivileged users and processes can execute those programs and gain the specified file capabilities up to the bounding set. Due to this bug, containers which included executable programs with inheritable file capabilities allowed otherwise unprivileged users and processes to additionally gain these inheritable file capabilities up to the container's bounding set. Containers which use Linux users and groups to perform privilege separation inside the container are most directly impacted. This bug did not affect the container security sandbox as the inheritable set never contained more capabilities than were included in the container's bounding set. This bug has been fixed in Moby (Docker Engine) 20.10.14. Running containers should be stopped, deleted, and recreated for the inheritable capabilities to be reset. This fix changes Moby (Docker Engine) behavior such that containers are started with a more typical Linux environment. As a workaround, the entry point of a container can be modified to use a utility like `capsh(1)` to drop inheritable capabilities prior to the primary process starting. | ||||