Total
2909 CVE
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2024-40931 | 1 Redhat | 2 Enterprise Linux, Rhel Eus | 2024-12-19 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mptcp: ensure snd_una is properly initialized on connect This is strictly related to commit fb7a0d334894 ("mptcp: ensure snd_nxt is properly initialized on connect"). It turns out that syzkaller can trigger the retransmit after fallback and before processing any other incoming packet - so that snd_una is still left uninitialized. Address the issue explicitly initializing snd_una together with snd_nxt and write_seq. | ||||
| CVE-2024-39479 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2024-12-19 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/i915/hwmon: Get rid of devm When both hwmon and hwmon drvdata (on which hwmon depends) are device managed resources, the expectation, on device unbind, is that hwmon will be released before drvdata. However, in i915 there are two separate code paths, which both release either drvdata or hwmon and either can be released before the other. These code paths (for device unbind) are as follows (see also the bug referenced below): Call Trace: release_nodes+0x11/0x70 devres_release_group+0xb2/0x110 component_unbind_all+0x8d/0xa0 component_del+0xa5/0x140 intel_pxp_tee_component_fini+0x29/0x40 [i915] intel_pxp_fini+0x33/0x80 [i915] i915_driver_remove+0x4c/0x120 [i915] i915_pci_remove+0x19/0x30 [i915] pci_device_remove+0x32/0xa0 device_release_driver_internal+0x19c/0x200 unbind_store+0x9c/0xb0 and Call Trace: release_nodes+0x11/0x70 devres_release_all+0x8a/0xc0 device_unbind_cleanup+0x9/0x70 device_release_driver_internal+0x1c1/0x200 unbind_store+0x9c/0xb0 This means that in i915, if use devm, we cannot gurantee that hwmon will always be released before drvdata. Which means that we have a uaf if hwmon sysfs is accessed when drvdata has been released but hwmon hasn't. The only way out of this seems to be do get rid of devm_ and release/free everything explicitly during device unbind. v2: Change commit message and other minor code changes v3: Cleanup from i915_hwmon_register on error (Armin Wolf) v4: Eliminate potential static analyzer warning (Rodrigo) Eliminate fetch_and_zero (Jani) v5: Restore previous logic for ddat_gt->hwmon_dev error return (Andi) | ||||
| CVE-2024-39462 | 1 Linux | 1 Linux Kernel | 2024-12-19 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: clk: bcm: dvp: Assign ->num before accessing ->hws Commit f316cdff8d67 ("clk: Annotate struct clk_hw_onecell_data with __counted_by") annotated the hws member of 'struct clk_hw_onecell_data' with __counted_by, which informs the bounds sanitizer about the number of elements in hws, so that it can warn when hws is accessed out of bounds. As noted in that change, the __counted_by member must be initialized with the number of elements before the first array access happens, otherwise there will be a warning from each access prior to the initialization because the number of elements is zero. This occurs in clk_dvp_probe() due to ->num being assigned after ->hws has been accessed: UBSAN: array-index-out-of-bounds in drivers/clk/bcm/clk-bcm2711-dvp.c:59:2 index 0 is out of range for type 'struct clk_hw *[] __counted_by(num)' (aka 'struct clk_hw *[]') Move the ->num initialization to before the first access of ->hws, which clears up the warning. | ||||
| CVE-2024-38616 | 1 Linux | 1 Linux Kernel | 2024-12-19 | 8.2 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: carl9170: re-fix fortified-memset warning The carl9170_tx_release() function sometimes triggers a fortified-memset warning in my randconfig builds: In file included from include/linux/string.h:254, from drivers/net/wireless/ath/carl9170/tx.c:40: In function 'fortify_memset_chk', inlined from 'carl9170_tx_release' at drivers/net/wireless/ath/carl9170/tx.c:283:2, inlined from 'kref_put' at include/linux/kref.h:65:3, inlined from 'carl9170_tx_put_skb' at drivers/net/wireless/ath/carl9170/tx.c:342:9: include/linux/fortify-string.h:493:25: error: call to '__write_overflow_field' declared with attribute warning: detected write beyond size of field (1st parameter); maybe use struct_group()? [-Werror=attribute-warning] 493 | __write_overflow_field(p_size_field, size); Kees previously tried to avoid this by using memset_after(), but it seems this does not fully address the problem. I noticed that the memset_after() here is done on a different part of the union (status) than the original cast was from (rate_driver_data), which may confuse the compiler. Unfortunately, the memset_after() trick does not work on driver_rates[] because that is part of an anonymous struct, and I could not get struct_group() to do this either. Using two separate memset() calls on the two members does address the warning though. | ||||
| CVE-2024-38590 | 1 Linux | 1 Linux Kernel | 2024-12-19 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/hns: Modify the print level of CQE error Too much print may lead to a panic in kernel. Change ibdev_err() to ibdev_err_ratelimited(), and change the printing level of cqe dump to debug level. | ||||
| CVE-2024-38575 | 1 Redhat | 1 Enterprise Linux | 2024-12-19 | 4.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: brcmfmac: pcie: handle randbuf allocation failure The kzalloc() in brcmf_pcie_download_fw_nvram() will return null if the physical memory has run out. As a result, if we use get_random_bytes() to generate random bytes in the randbuf, the null pointer dereference bug will happen. In order to prevent allocation failure, this patch adds a separate function using buffer on kernel stack to generate random bytes in the randbuf, which could prevent the kernel stack from overflow. | ||||
| CVE-2024-38384 | 2 Linux, Redhat | 2 Linux Kernel, Rhel Eus | 2024-12-19 | 8.4 High |
| In the Linux kernel, the following vulnerability has been resolved: blk-cgroup: fix list corruption from reorder of WRITE ->lqueued __blkcg_rstat_flush() can be run anytime, especially when blk_cgroup_bio_start is being executed. If WRITE of `->lqueued` is re-ordered with READ of 'bisc->lnode.next' in the loop of __blkcg_rstat_flush(), `next_bisc` can be assigned with one stat instance being added in blk_cgroup_bio_start(), then the local list in __blkcg_rstat_flush() could be corrupted. Fix the issue by adding one barrier. | ||||
| CVE-2024-35997 | 1 Linux | 1 Linux Kernel | 2024-12-19 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: HID: i2c-hid: remove I2C_HID_READ_PENDING flag to prevent lock-up The flag I2C_HID_READ_PENDING is used to serialize I2C operations. However, this is not necessary, because I2C core already has its own locking for that. More importantly, this flag can cause a lock-up: if the flag is set in i2c_hid_xfer() and an interrupt happens, the interrupt handler (i2c_hid_irq) will check this flag and return immediately without doing anything, then the interrupt handler will be invoked again in an infinite loop. Since interrupt handler is an RT task, it takes over the CPU and the flag-clearing task never gets scheduled, thus we have a lock-up. Delete this unnecessary flag. | ||||
| CVE-2024-35948 | 1 Linux | 1 Linux Kernel | 2024-12-19 | 8.4 High |
| In the Linux kernel, the following vulnerability has been resolved: bcachefs: Check for journal entries overruning end of sb clean section Fix a missing bounds check in superblock validation. Note that we don't yet have repair code for this case - repair code for individual items is generally low priority, since the whole superblock is checksummed, validated prior to write, and we have backups. | ||||
| CVE-2024-35844 | 2024-12-19 | 5.5 Medium | ||
| In the Linux kernel, the following vulnerability has been resolved: f2fs: compress: fix reserve_cblocks counting error when out of space When a file only needs one direct_node, performing the following operations will cause the file to be unrepairable: unisoc # ./f2fs_io compress test.apk unisoc #df -h | grep dm-48 /dev/block/dm-48 112G 112G 1.2M 100% /data unisoc # ./f2fs_io release_cblocks test.apk 924 unisoc # df -h | grep dm-48 /dev/block/dm-48 112G 112G 4.8M 100% /data unisoc # dd if=/dev/random of=file4 bs=1M count=3 3145728 bytes (3.0 M) copied, 0.025 s, 120 M/s unisoc # df -h | grep dm-48 /dev/block/dm-48 112G 112G 1.8M 100% /data unisoc # ./f2fs_io reserve_cblocks test.apk F2FS_IOC_RESERVE_COMPRESS_BLOCKS failed: No space left on device adb reboot unisoc # df -h | grep dm-48 /dev/block/dm-48 112G 112G 11M 100% /data unisoc # ./f2fs_io reserve_cblocks test.apk 0 This is because the file has only one direct_node. After returning to -ENOSPC, reserved_blocks += ret will not be executed. As a result, the reserved_blocks at this time is still 0, which is not the real number of reserved blocks. Therefore, fsck cannot be set to repair the file. After this patch, the fsck flag will be set to fix this problem. unisoc # df -h | grep dm-48 /dev/block/dm-48 112G 112G 1.8M 100% /data unisoc # ./f2fs_io reserve_cblocks test.apk F2FS_IOC_RESERVE_COMPRESS_BLOCKS failed: No space left on device adb reboot then fsck will be executed unisoc # df -h | grep dm-48 /dev/block/dm-48 112G 112G 11M 100% /data unisoc # ./f2fs_io reserve_cblocks test.apk 924 | ||||
| CVE-2024-35841 | 2024-12-19 | 5.5 Medium | ||
| In the Linux kernel, the following vulnerability has been resolved: net: tls, fix WARNIING in __sk_msg_free A splice with MSG_SPLICE_PAGES will cause tls code to use the tls_sw_sendmsg_splice path in the TLS sendmsg code to move the user provided pages from the msg into the msg_pl. This will loop over the msg until msg_pl is full, checked by sk_msg_full(msg_pl). The user can also set the MORE flag to hint stack to delay sending until receiving more pages and ideally a full buffer. If the user adds more pages to the msg than can fit in the msg_pl scatterlist (MAX_MSG_FRAGS) we should ignore the MORE flag and send the buffer anyways. What actually happens though is we abort the msg to msg_pl scatterlist setup and then because we forget to set 'full record' indicating we can no longer consume data without a send we fallthrough to the 'continue' path which will check if msg_data_left(msg) has more bytes to send and then attempts to fit them in the already full msg_pl. Then next iteration of sender doing send will encounter a full msg_pl and throw the warning in the syzbot report. To fix simply check if we have a full_record in splice code path and if not send the msg regardless of MORE flag. | ||||
| CVE-2024-35799 | 2024-12-19 | 6.2 Medium | ||
| In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Prevent crash when disable stream [Why] Disabling stream encoder invokes a function that no longer exists. [How] Check if the function declaration is NULL in disable stream encoder. | ||||
| CVE-2024-26976 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2024-12-19 | 7 High |
| In the Linux kernel, the following vulnerability has been resolved: KVM: Always flush async #PF workqueue when vCPU is being destroyed Always flush the per-vCPU async #PF workqueue when a vCPU is clearing its completion queue, e.g. when a VM and all its vCPUs is being destroyed. KVM must ensure that none of its workqueue callbacks is running when the last reference to the KVM _module_ is put. Gifting a reference to the associated VM prevents the workqueue callback from dereferencing freed vCPU/VM memory, but does not prevent the KVM module from being unloaded before the callback completes. Drop the misguided VM refcount gifting, as calling kvm_put_kvm() from async_pf_execute() if kvm_put_kvm() flushes the async #PF workqueue will result in deadlock. async_pf_execute() can't return until kvm_put_kvm() finishes, and kvm_put_kvm() can't return until async_pf_execute() finishes: WARNING: CPU: 8 PID: 251 at virt/kvm/kvm_main.c:1435 kvm_put_kvm+0x2d/0x320 [kvm] Modules linked in: vhost_net vhost vhost_iotlb tap kvm_intel kvm irqbypass CPU: 8 PID: 251 Comm: kworker/8:1 Tainted: G W 6.6.0-rc1-e7af8d17224a-x86/gmem-vm #119 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015 Workqueue: events async_pf_execute [kvm] RIP: 0010:kvm_put_kvm+0x2d/0x320 [kvm] Call Trace: <TASK> async_pf_execute+0x198/0x260 [kvm] process_one_work+0x145/0x2d0 worker_thread+0x27e/0x3a0 kthread+0xba/0xe0 ret_from_fork+0x2d/0x50 ret_from_fork_asm+0x11/0x20 </TASK> ---[ end trace 0000000000000000 ]--- INFO: task kworker/8:1:251 blocked for more than 120 seconds. Tainted: G W 6.6.0-rc1-e7af8d17224a-x86/gmem-vm #119 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. task:kworker/8:1 state:D stack:0 pid:251 ppid:2 flags:0x00004000 Workqueue: events async_pf_execute [kvm] Call Trace: <TASK> __schedule+0x33f/0xa40 schedule+0x53/0xc0 schedule_timeout+0x12a/0x140 __wait_for_common+0x8d/0x1d0 __flush_work.isra.0+0x19f/0x2c0 kvm_clear_async_pf_completion_queue+0x129/0x190 [kvm] kvm_arch_destroy_vm+0x78/0x1b0 [kvm] kvm_put_kvm+0x1c1/0x320 [kvm] async_pf_execute+0x198/0x260 [kvm] process_one_work+0x145/0x2d0 worker_thread+0x27e/0x3a0 kthread+0xba/0xe0 ret_from_fork+0x2d/0x50 ret_from_fork_asm+0x11/0x20 </TASK> If kvm_clear_async_pf_completion_queue() actually flushes the workqueue, then there's no need to gift async_pf_execute() a reference because all invocations of async_pf_execute() will be forced to complete before the vCPU and its VM are destroyed/freed. And that in turn fixes the module unloading bug as __fput() won't do module_put() on the last vCPU reference until the vCPU has been freed, e.g. if closing the vCPU file also puts the last reference to the KVM module. Note that kvm_check_async_pf_completion() may also take the work item off the completion queue and so also needs to flush the work queue, as the work will not be seen by kvm_clear_async_pf_completion_queue(). Waiting on the workqueue could theoretically delay a vCPU due to waiting for the work to complete, but that's a very, very small chance, and likely a very small delay. kvm_arch_async_page_present_queued() unconditionally makes a new request, i.e. will effectively delay entering the guest, so the remaining work is really just: trace_kvm_async_pf_completed(addr, cr2_or_gpa); __kvm_vcpu_wake_up(vcpu); mmput(mm); and mmput() can't drop the last reference to the page tables if the vCPU is still alive, i.e. the vCPU won't get stuck tearing down page tables. Add a helper to do the flushing, specifically to deal with "wakeup all" work items, as they aren't actually work items, i.e. are never placed in a workqueue. Trying to flush a bogus workqueue entry rightly makes __flush_work() complain (kudos to whoever added that sanity check). Note, commit 5f6de5cbebee ("KVM: Prevent module exit until al ---truncated--- | ||||
| CVE-2024-26785 | 1 Redhat | 1 Enterprise Linux | 2024-12-19 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: iommufd: Fix protection fault in iommufd_test_syz_conv_iova Syzkaller reported the following bug: general protection fault, probably for non-canonical address 0xdffffc0000000038: 0000 [#1] SMP KASAN KASAN: null-ptr-deref in range [0x00000000000001c0-0x00000000000001c7] Call Trace: lock_acquire lock_acquire+0x1ce/0x4f0 down_read+0x93/0x4a0 iommufd_test_syz_conv_iova+0x56/0x1f0 iommufd_test_access_rw.isra.0+0x2ec/0x390 iommufd_test+0x1058/0x1e30 iommufd_fops_ioctl+0x381/0x510 vfs_ioctl __do_sys_ioctl __se_sys_ioctl __x64_sys_ioctl+0x170/0x1e0 do_syscall_x64 do_syscall_64+0x71/0x140 This is because the new iommufd_access_change_ioas() sets access->ioas to NULL during its process, so the lock might be gone in a concurrent racing context. Fix this by doing the same access->ioas sanity as iommufd_access_rw() and iommufd_access_pin_pages() functions do. | ||||
| CVE-2024-26780 | 2024-12-19 | 5.5 Medium | ||
| In the Linux kernel, the following vulnerability has been resolved: af_unix: Fix task hung while purging oob_skb in GC. syzbot reported a task hung; at the same time, GC was looping infinitely in list_for_each_entry_safe() for OOB skb. [0] syzbot demonstrated that the list_for_each_entry_safe() was not actually safe in this case. A single skb could have references for multiple sockets. If we free such a skb in the list_for_each_entry_safe(), the current and next sockets could be unlinked in a single iteration. unix_notinflight() uses list_del_init() to unlink the socket, so the prefetched next socket forms a loop itself and list_for_each_entry_safe() never stops. Here, we must use while() and make sure we always fetch the first socket. [0]: Sending NMI from CPU 0 to CPUs 1: NMI backtrace for cpu 1 CPU: 1 PID: 5065 Comm: syz-executor236 Not tainted 6.8.0-rc3-syzkaller-00136-g1f719a2f3fa6 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/25/2024 RIP: 0010:preempt_count arch/x86/include/asm/preempt.h:26 [inline] RIP: 0010:check_kcov_mode kernel/kcov.c:173 [inline] RIP: 0010:__sanitizer_cov_trace_pc+0xd/0x60 kernel/kcov.c:207 Code: cc cc cc cc 66 0f 1f 84 00 00 00 00 00 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 f3 0f 1e fa 65 48 8b 14 25 40 c2 03 00 <65> 8b 05 b4 7c 78 7e a9 00 01 ff 00 48 8b 34 24 74 0f f6 c4 01 74 RSP: 0018:ffffc900033efa58 EFLAGS: 00000283 RAX: ffff88807b077800 RBX: ffff88807b077800 RCX: 1ffffffff27b1189 RDX: ffff88802a5a3b80 RSI: ffffffff8968488d RDI: ffff88807b077f70 RBP: ffffc900033efbb0 R08: 0000000000000001 R09: fffffbfff27a900c R10: ffffffff93d48067 R11: ffffffff8ae000eb R12: ffff88807b077800 R13: dffffc0000000000 R14: ffff88807b077e40 R15: 0000000000000001 FS: 0000000000000000(0000) GS:ffff8880b9500000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000564f4fc1e3a8 CR3: 000000000d57a000 CR4: 00000000003506f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <NMI> </NMI> <TASK> unix_gc+0x563/0x13b0 net/unix/garbage.c:319 unix_release_sock+0xa93/0xf80 net/unix/af_unix.c:683 unix_release+0x91/0xf0 net/unix/af_unix.c:1064 __sock_release+0xb0/0x270 net/socket.c:659 sock_close+0x1c/0x30 net/socket.c:1421 __fput+0x270/0xb80 fs/file_table.c:376 task_work_run+0x14f/0x250 kernel/task_work.c:180 exit_task_work include/linux/task_work.h:38 [inline] do_exit+0xa8a/0x2ad0 kernel/exit.c:871 do_group_exit+0xd4/0x2a0 kernel/exit.c:1020 __do_sys_exit_group kernel/exit.c:1031 [inline] __se_sys_exit_group kernel/exit.c:1029 [inline] __x64_sys_exit_group+0x3e/0x50 kernel/exit.c:1029 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xd5/0x270 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x6f/0x77 RIP: 0033:0x7f9d6cbdac09 Code: Unable to access opcode bytes at 0x7f9d6cbdabdf. RSP: 002b:00007fff5952feb8 EFLAGS: 00000246 ORIG_RAX: 00000000000000e7 RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f9d6cbdac09 RDX: 000000000000003c RSI: 00000000000000e7 RDI: 0000000000000000 RBP: 00007f9d6cc552b0 R08: ffffffffffffffb8 R09: 0000000000000006 R10: 0000000000000006 R11: 0000000000000246 R12: 00007f9d6cc552b0 R13: 0000000000000000 R14: 00007f9d6cc55d00 R15: 00007f9d6cbabe70 </TASK> | ||||
| CVE-2024-26723 | 1 Linux | 1 Linux Kernel | 2024-12-19 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: lan966x: Fix crash when adding interface under a lag There is a crash when adding one of the lan966x interfaces under a lag interface. The issue can be reproduced like this: ip link add name bond0 type bond miimon 100 mode balance-xor ip link set dev eth0 master bond0 The reason is because when adding a interface under the lag it would go through all the ports and try to figure out which other ports are under that lag interface. And the issue is that lan966x can have ports that are NULL pointer as they are not probed. So then iterating over these ports it would just crash as they are NULL pointers. The fix consists in actually checking for NULL pointers before accessing something from the ports. Like we do in other places. | ||||
| CVE-2024-26636 | 2024-12-19 | 5.5 Medium | ||
| In the Linux kernel, the following vulnerability has been resolved: llc: make llc_ui_sendmsg() more robust against bonding changes syzbot was able to trick llc_ui_sendmsg(), allocating an skb with no headroom, but subsequently trying to push 14 bytes of Ethernet header [1] Like some others, llc_ui_sendmsg() releases the socket lock before calling sock_alloc_send_skb(). Then it acquires it again, but does not redo all the sanity checks that were performed. This fix: - Uses LL_RESERVED_SPACE() to reserve space. - Check all conditions again after socket lock is held again. - Do not account Ethernet header for mtu limitation. [1] skbuff: skb_under_panic: text:ffff800088baa334 len:1514 put:14 head:ffff0000c9c37000 data:ffff0000c9c36ff2 tail:0x5dc end:0x6c0 dev:bond0 kernel BUG at net/core/skbuff.c:193 ! Internal error: Oops - BUG: 00000000f2000800 [#1] PREEMPT SMP Modules linked in: CPU: 0 PID: 6875 Comm: syz-executor.0 Not tainted 6.7.0-rc8-syzkaller-00101-g0802e17d9aca-dirty #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 11/17/2023 pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : skb_panic net/core/skbuff.c:189 [inline] pc : skb_under_panic+0x13c/0x140 net/core/skbuff.c:203 lr : skb_panic net/core/skbuff.c:189 [inline] lr : skb_under_panic+0x13c/0x140 net/core/skbuff.c:203 sp : ffff800096f97000 x29: ffff800096f97010 x28: ffff80008cc8d668 x27: dfff800000000000 x26: ffff0000cb970c90 x25: 00000000000005dc x24: ffff0000c9c36ff2 x23: ffff0000c9c37000 x22: 00000000000005ea x21: 00000000000006c0 x20: 000000000000000e x19: ffff800088baa334 x18: 1fffe000368261ce x17: ffff80008e4ed000 x16: ffff80008a8310f8 x15: 0000000000000001 x14: 1ffff00012df2d58 x13: 0000000000000000 x12: 0000000000000000 x11: 0000000000000001 x10: 0000000000ff0100 x9 : e28a51f1087e8400 x8 : e28a51f1087e8400 x7 : ffff80008028f8d0 x6 : 0000000000000000 x5 : 0000000000000001 x4 : 0000000000000001 x3 : ffff800082b78714 x2 : 0000000000000001 x1 : 0000000100000000 x0 : 0000000000000089 Call trace: skb_panic net/core/skbuff.c:189 [inline] skb_under_panic+0x13c/0x140 net/core/skbuff.c:203 skb_push+0xf0/0x108 net/core/skbuff.c:2451 eth_header+0x44/0x1f8 net/ethernet/eth.c:83 dev_hard_header include/linux/netdevice.h:3188 [inline] llc_mac_hdr_init+0x110/0x17c net/llc/llc_output.c:33 llc_sap_action_send_xid_c+0x170/0x344 net/llc/llc_s_ac.c:85 llc_exec_sap_trans_actions net/llc/llc_sap.c:153 [inline] llc_sap_next_state net/llc/llc_sap.c:182 [inline] llc_sap_state_process+0x1ec/0x774 net/llc/llc_sap.c:209 llc_build_and_send_xid_pkt+0x12c/0x1c0 net/llc/llc_sap.c:270 llc_ui_sendmsg+0x7bc/0xb1c net/llc/af_llc.c:997 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg net/socket.c:745 [inline] sock_sendmsg+0x194/0x274 net/socket.c:767 splice_to_socket+0x7cc/0xd58 fs/splice.c:881 do_splice_from fs/splice.c:933 [inline] direct_splice_actor+0xe4/0x1c0 fs/splice.c:1142 splice_direct_to_actor+0x2a0/0x7e4 fs/splice.c:1088 do_splice_direct+0x20c/0x348 fs/splice.c:1194 do_sendfile+0x4bc/0xc70 fs/read_write.c:1254 __do_sys_sendfile64 fs/read_write.c:1322 [inline] __se_sys_sendfile64 fs/read_write.c:1308 [inline] __arm64_sys_sendfile64+0x160/0x3b4 fs/read_write.c:1308 __invoke_syscall arch/arm64/kernel/syscall.c:37 [inline] invoke_syscall+0x98/0x2b8 arch/arm64/kernel/syscall.c:51 el0_svc_common+0x130/0x23c arch/arm64/kernel/syscall.c:136 do_el0_svc+0x48/0x58 arch/arm64/kernel/syscall.c:155 el0_svc+0x54/0x158 arch/arm64/kernel/entry-common.c:678 el0t_64_sync_handler+0x84/0xfc arch/arm64/kernel/entry-common.c:696 el0t_64_sync+0x190/0x194 arch/arm64/kernel/entry.S:595 Code: aa1803e6 aa1903e7 a90023f5 94792f6a (d4210000) | ||||
| CVE-2024-26634 | 2024-12-19 | 5.5 Medium | ||
| In the Linux kernel, the following vulnerability has been resolved: net: fix removing a namespace with conflicting altnames Mark reports a BUG() when a net namespace is removed. kernel BUG at net/core/dev.c:11520! Physical interfaces moved outside of init_net get "refunded" to init_net when that namespace disappears. The main interface name may get overwritten in the process if it would have conflicted. We need to also discard all conflicting altnames. Recent fixes addressed ensuring that altnames get moved with the main interface, which surfaced this problem. | ||||
| CVE-2023-52695 | 2024-12-19 | 5.5 Medium | ||
| In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Check writeback connectors in create_validate_stream_for_sink [WHY & HOW] This is to check connector type to avoid unhandled null pointer for writeback connectors. | ||||
| CVE-2023-52678 | 2024-12-19 | 5.5 Medium | ||
| In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: Confirm list is non-empty before utilizing list_first_entry in kfd_topology.c Before using list_first_entry, make sure to check that list is not empty, if list is empty return -ENODATA. Fixes the below: drivers/gpu/drm/amd/amdgpu/../amdkfd/kfd_topology.c:1347 kfd_create_indirect_link_prop() warn: can 'gpu_link' even be NULL? drivers/gpu/drm/amd/amdgpu/../amdkfd/kfd_topology.c:1428 kfd_add_peer_prop() warn: can 'iolink1' even be NULL? drivers/gpu/drm/amd/amdgpu/../amdkfd/kfd_topology.c:1433 kfd_add_peer_prop() warn: can 'iolink2' even be NULL? | ||||