| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A vulnerability in the ARP packet processing of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software for Cisco Firepower 2100 Series Security Appliances could allow an unauthenticated, adjacent attacker to cause an affected device to reload, resulting in a denial of service (DoS) condition on an affected device. The vulnerability is due to incorrect processing of ARP packets received by the management interface of an affected device. An attacker could exploit this vulnerability by sending a series of unicast ARP packets in a short timeframe that would reach the management interface of an affected device. A successful exploit could allow the attacker to consume resources on an affected device, which would prevent the device from sending internal system keepalives and eventually cause the device to reload, resulting in a denial of service (DoS) condition. |
| A vulnerability in the DHCP module of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on the affected device. The vulnerability is due to incorrect processing of certain DHCP packets. An attacker could exploit this vulnerability by sending a crafted DHCP packet to the affected device. A successful exploit could allow the attacker to cause a DoS condition on the affected device. |
| A vulnerability in the OSPF Version 2 (OSPFv2) implementation of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause an affected device to reload, resulting in a denial of service (DoS) condition. The vulnerability is due to incomplete input validation when the affected software processes certain OSPFv2 packets with Link-Local Signaling (LLS) data. An attacker could exploit this vulnerability by sending a malformed OSPFv2 packet to an affected device. A successful exploit could allow the attacker to cause an affected device to reload, resulting in a DoS condition. |
| A vulnerability in the Internet Key Exchange Version 2 (IKEv2) implementation of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an authenticated, remote attacker to trigger a denial of service (DoS) condition on an affected device. This vulnerability is due to improper control of a resource. An attacker with the ability to spoof a trusted IKEv2 site-to-site VPN peer and in possession of valid IKEv2 credentials for that peer could exploit this vulnerability by sending malformed, authenticated IKEv2 messages to an affected device. A successful exploit could allow the attacker to trigger a reload of the device. |
| A vulnerability in the DNS inspection handler of Cisco Adaptive Security Appliance (ASA) Software and Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause a denial of service condition (DoS) on an affected device. This vulnerability is due to a lack of proper processing of incoming requests. An attacker could exploit this vulnerability by sending crafted DNS requests at a high rate to an affected device. A successful exploit could allow the attacker to cause the device to stop responding, resulting in a DoS condition. |
| A vulnerability in the internal packet-processing functionality of Cisco Firepower Threat Defense (FTD) Software for Cisco Firepower 2100 Series Security Appliances could allow an unauthenticated, remote attacker to cause an affected device to stop processing traffic, resulting in a denial of service (DoS) condition. The vulnerability is due to the affected software improperly validating IP Version 4 (IPv4) and IP Version 6 (IPv6) packets after the software reassembles the packets (following IP Fragmentation). An attacker could exploit this vulnerability by sending a series of malicious, fragmented IPv4 or IPv6 packets to an affected device. A successful exploit could allow the attacker to cause Snort processes on the affected device to hang at 100% CPU utilization, which could cause the device to stop processing traffic and result in a DoS condition until the device is reloaded manually. This vulnerability affects Cisco Firepower Threat Defense (FTD) Software Releases 6.2.1 and 6.2.2, if the software is running on a Cisco Firepower 2100 Series Security Appliance. Cisco Bug IDs: CSCvf91098. |
| A vulnerability in the packet processing functionality of Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. The vulnerability is due to inefficient memory management. An attacker could exploit this vulnerability by sending a high rate of IPv4 or IPv6 traffic through an affected device. This traffic would need to match a configured block action in an access control policy. An exploit could allow the attacker to cause a memory exhaustion condition on the affected device, which would result in a DoS for traffic transiting the device, as well as sluggish performance of the management interface. Once the flood is stopped, performance should return to previous states. |
| A vulnerability in the logging configuration of Secure Sockets Layer (SSL) policies for Cisco FirePOWER System Software 5.3.0 through 6.2.2 could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition due to high consumption of system resources. The vulnerability is due to the logging of certain TCP packets by the affected software. An attacker could exploit this vulnerability by sending a flood of crafted TCP packets to an affected device. A successful exploit could allow the attacker to cause a DoS condition. The success of an exploit is dependent on how an administrator has configured logging for SSL policies for a device. This vulnerability affects Cisco FirePOWER System Software that is configured to log connections by using SSL policy default actions. Cisco Bug IDs: CSCvd07072. |
| A vulnerability in the Internet Key Exchange version 1 (IKEv1) feature of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to trigger a reload of an affected device, resulting in a denial of service (DoS) condition. The vulnerability is due to improper management of system memory. An attacker could exploit this vulnerability by sending malicious IKEv1 traffic to an affected device. The attacker does not need valid credentials to authenticate the VPN session, nor does the attacker's source address need to match a peer statement in the crypto map applied to the ingress interface of the affected device. An exploit could allow the attacker to exhaust system memory resources, leading to a reload of an affected device. |
| A vulnerability in the VPN System Logging functionality for Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause a memory leak that can deplete system memory over time, which can cause unexpected system behaviors or device crashes. The vulnerability is due to the system memory not being properly freed for a VPN System Logging event generated when a VPN session is created or deleted. An attacker could exploit this vulnerability by repeatedly creating or deleting a VPN tunnel connection, which could leak a small amount of system memory for each logging event. A successful exploit could allow the attacker to cause system memory depletion, which can lead to a systemwide denial of service (DoS) condition. The attacker does not have any control of whether VPN System Logging is configured or not on the device, but it is enabled by default. |
| A vulnerability in the cryptographic hardware accelerator driver of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause an affected device to reload, resulting in a temporary denial of service (DoS) condition. The vulnerability exists because the affected devices have a limited amount of Direct Memory Access (DMA) memory and the affected software improperly handles resources in low-memory conditions. An attacker could exploit this vulnerability by sending a sustained, high rate of malicious traffic to an affected device to exhaust memory on the device. A successful exploit could allow the attacker to exhaust DMA memory on the affected device, which could cause the device to reload and result in a temporary DoS condition. |
| A vulnerability in the IP fragment-handling implementation of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause a memory leak on an affected device. This memory leak could prevent traffic from being processed through the device, resulting in a denial of service (DoS) condition. The vulnerability is due to improper error handling when specific failures occur during IP fragment reassembly. An attacker could exploit this vulnerability by sending crafted, fragmented IP traffic to a targeted device. A successful exploit could allow the attacker to continuously consume memory on the affected device and eventually impact traffic, resulting in a DoS condition. The device could require a manual reboot to recover from the DoS condition. Note: This vulnerability applies to both IP Version 4 (IPv4) and IP Version 6 (IPv6) traffic. |
| Multiple vulnerabilities in the Media Gateway Control Protocol (MGCP) inspection feature of Cisco Adaptive Security Appliance (ASA) Software and Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. The vulnerabilities are due to inefficient memory management. An attacker could exploit these vulnerabilities by sending crafted MGCP packets through an affected device. An exploit could allow the attacker to cause memory exhaustion resulting in a restart of an affected device, causing a DoS condition for traffic traversing the device. |
| Multiple vulnerabilities in the Server Message Block (SMB) Protocol preprocessor detection engine for Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, adjacent or remote attacker to cause a denial of service (DoS) condition. For more information about these vulnerabilities, see the Details section of this advisory. |
| A vulnerability in the internal packet-processing functionality of Cisco Firepower Threat Defense (FTD) Software for the Cisco Firepower 2100 Series could allow an unauthenticated, remote attacker to cause an affected device to stop processing traffic, resulting in a denial of service (DoS) condition. The vulnerability is due to a logic error, which may prevent ingress buffers from being replenished under specific traffic conditions. An attacker could exploit this vulnerability by sending a series of crafted packets to an affected device. A successful exploit could allow the attacker to consume all input buffers, which are shared between all interfaces, leading to a queue wedge condition in all active interfaces. This situation would cause an affected device to stop processing any incoming traffic and result in a DoS condition until the device is reloaded manually. |
| A vulnerability in the processing of SSH connections of Cisco Firepower Management Center (FMC) and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device.
This vulnerability is due to improper error handling when an SSH session fails to be established. An attacker could exploit this vulnerability by sending a high rate of crafted SSH connections to the instance. A successful exploit could allow the attacker to cause resource exhaustion, resulting in a reboot on the affected device. |
| A vulnerability in the TLS 1.3 implementation for a specific cipher for Cisco Secure Firewall Adaptive Security Appliance (ASA) Software and Cisco Secure Firewall Threat Defense (FTD) Software for Cisco Firepower 3100 and 4200 Series devices could allow an authenticated, remote attacker to consume resources that are associated with incoming TLS 1.3 connections, which eventually could cause the device to stop accepting any new SSL/TLS or VPN requests.
This vulnerability is due to the implementation of the TLS 1.3 Cipher TLS_CHACHA20_POLY1305_SHA256. An attacker could exploit this vulnerability by sending a large number of TLS 1.3 connections with the specific TLS 1.3 Cipher TLS_CHACHA20_POLY1305_SHA256. A successful exploit could allow the attacker to cause a denial of service (DoS) condition where no new incoming encrypted connections are accepted. The device must be reloaded to clear this condition.
Note: These incoming TLS 1.3 connections include both data traffic and user-management traffic. After the device is in the vulnerable state, no new encrypted connections can be accepted. |
| A vulnerability in the memory management of Cisco Adaptive Security Appliance (ASA) Software and Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. This vulnerability is due to improper resource management when connection rates are high. An attacker could exploit this vulnerability by opening a significant number of connections on an affected device. A successful exploit could allow the attacker to cause the device to reload, resulting in a DoS condition. |
| Multiple vulnerabilities in the Server Message Block (SMB) Protocol preprocessor detection engine for Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, adjacent or remote attacker to cause a denial of service (DoS) condition. For more information about these vulnerabilities, see the Details section of this advisory. |
| A vulnerability in the ICMP ingress packet processing of Cisco Firepower Threat Defense (FTD) Software for Cisco Firepower 4110 appliances could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. The vulnerability is due to incomplete input validation upon receiving ICMP packets. An attacker could exploit this vulnerability by sending a high number of crafted ICMP or ICMPv6 packets to an affected device. A successful exploit could allow the attacker to cause a memory exhaustion condition that may result in an unexpected reload. No manual intervention is needed to recover the device after the reload. |
