| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A vulnerability in the web framework of Cisco Unified Communications Manager (CallManager) could allow an unauthenticated, remote attacker to conduct a cross-site request forgery (CSRF) attack against a user of the web interface of the affected software. More Information: CSCvb70021. Known Affected Releases: 11.5(1.11007.2). |
| A vulnerability in the web framework of Cisco Unified Communications Manager (CallManager) could allow an authenticated, remote attacker to perform a cross-site scripting (XSS) attack. More Information: CSCvb70033. Known Affected Releases: 11.5(1.11007.2). Known Fixed Releases: 12.0(0.98000.507) 11.0(1.23900.5) 11.0(1.23900.3) 10.5(2.15900.2). |
| A vulnerability in the Plug-and-Play (PnP) subsystem of the Cisco Aironet 1800, 2800, and 3800 Series Access Points running a Lightweight Access Point (AP) or Mobility Express image could allow an unauthenticated, adjacent attacker to execute arbitrary code with root privileges. The vulnerability is due to insufficient validation of PnP server responses. The PnP feature is only active while the device does not contain a configuration, such as a first time boot or after a factory reset has been issued. An attacker with the ability to respond to PnP configuration requests from the affected device can exploit the vulnerability by returning malicious PnP responses. If a Cisco Application Policy Infrastructure Controller - Enterprise Module (APIC-EM) is available on the network, the attacker would need to exploit the issue in the short window before a valid PnP response was received. If successful, the attacker could gain the ability to execute arbitrary code with root privileges on the underlying operating system of the device. Cisco has confirmed that the only vulnerable software version is 8.3.102.0. Cisco Bug IDs: CSCvb42386. |
| A cross-site scripting (XSS) filter bypass vulnerability in the web-based management interface of Cisco Unified Communications Manager could allow an unauthenticated, remote attacker to conduct XSS attacks against a user of an affected device. More Information: CSCvc21620. Known Affected Releases: 10.5(2.14076.1). Known Fixed Releases: 12.0(0.98000.641) 12.0(0.98000.500) 12.0(0.98000.219). |
| A RADIUS Secret Disclosure vulnerability in the web network management interface of Cisco Prime Optical for Service Providers could allow an authenticated, remote attacker to disclose sensitive information in the configuration generated for a device. The attacker must have valid credentials for the device. More Information: CSCvc65257. Known Affected Releases: 10.6(0.1). |
| A vulnerability in the URL filtering feature of Cisco AsyncOS Software for Cisco Web Security Appliance (WSA) could allow an unauthenticated, remote attacker to bypass a configured URL filter rule. Affected Products: This vulnerability affects all releases prior to the first fixed release of Cisco AsyncOS Software for Cisco Web Security Appliance (WSA), both virtual and hardware appliances, that are configured with URL filters for email scanning. More Information: CSCvc69700. Known Affected Releases: 8.5.3-069 9.1.1-074 9.1.2-010. |
| A vulnerability in the web framework code of Cisco Prime Service Catalog could allow an unauthenticated, remote attacker to conduct a cross-site scripting (XSS) attack against the user of the web interface of the affected system. More Information: CSCvc79842 CSCvc79846 CSCvc79855 CSCvc79873 CSCvc79882 CSCvc79891. Known Affected Releases: 11.1.2. |
| A vulnerability in the DHCP client implementation of Cisco IOS (12.2, 12.4, and 15.0 through 15.6) and Cisco IOS XE (3.3 through 3.7) could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition. The vulnerability occurs during the parsing of a crafted DHCP packet. An attacker could exploit this vulnerability by sending crafted DHCP packets to an affected device that is configured as a DHCP client. A successful exploit could allow the attacker to cause a reload of an affected device, resulting in a DoS condition. This vulnerability affects Cisco devices that are running a vulnerable release of Cisco IOS or IOS XE Software and using a specific DHCP client configuration. Cisco Bug IDs: CSCuu43892. |
| Multiple vulnerabilities in the EnergyWise module of Cisco IOS (12.2 and 15.0 through 15.6) and Cisco IOS XE (3.2 through 3.18) could allow an unauthenticated, remote attacker to cause a buffer overflow condition or a reload of an affected device, leading to a denial of service (DoS) condition. These vulnerabilities are due to improper parsing of crafted EnergyWise packets destined to an affected device. An attacker could exploit these vulnerabilities by sending crafted EnergyWise packets to be processed by an affected device. An exploit could allow the attacker to cause a buffer overflow condition or a reload of the affected device, leading to a DoS condition. Cisco IOS Software and Cisco IOS XE Software support EnergyWise for IPv4 communication. Only IPv4 packets destined to a device configured as an EnergyWise domain member can trigger these vulnerabilities. IPv6 packets cannot be used to trigger these vulnerabilities. Cisco Bug ID CSCut50727. |
| Multiple vulnerabilities in the EnergyWise module of Cisco IOS (12.2 and 15.0 through 15.6) and Cisco IOS XE (3.2 through 3.18) could allow an unauthenticated, remote attacker to cause a buffer overflow condition or a reload of an affected device, leading to a denial of service (DoS) condition. These vulnerabilities are due to improper parsing of crafted EnergyWise packets destined to an affected device. An attacker could exploit these vulnerabilities by sending crafted EnergyWise packets to be processed by an affected device. An exploit could allow the attacker to cause a buffer overflow condition or a reload of the affected device, leading to a DoS condition. Cisco IOS Software and Cisco IOS XE Software support EnergyWise for IPv4 communication. Only IPv4 packets destined to a device configured as an EnergyWise domain member can trigger these vulnerabilities. IPv6 packets cannot be used to trigger these vulnerabilities. Cisco Bug ID CSCut47751. |
| Multiple vulnerabilities in the EnergyWise module of Cisco IOS (12.2 and 15.0 through 15.6) and Cisco IOS XE (3.2 through 3.18) could allow an unauthenticated, remote attacker to cause a buffer overflow condition or a reload of an affected device, leading to a denial of service (DoS) condition. These vulnerabilities are due to improper parsing of crafted EnergyWise packets destined to an affected device. An attacker could exploit these vulnerabilities by sending crafted EnergyWise packets to be processed by an affected device. An exploit could allow the attacker to cause a buffer overflow condition or a reload of the affected device, leading to a DoS condition. Cisco IOS Software and Cisco IOS XE Software support EnergyWise for IPv4 communication. Only IPv4 packets destined to a device configured as an EnergyWise domain member can trigger these vulnerabilities. IPv6 packets cannot be used to trigger these vulnerabilities. Cisco Bug ID CSCur29331. |
| A vulnerability in the web framework of Cisco IOS XE Software could allow an authenticated, remote attacker to inject arbitrary commands that are executed with root privileges. The vulnerability is due to insufficient input validation of HTTP parameters supplied by the user. An attacker could exploit this vulnerability by authenticating to the device and submitting crafted input to the affected web page parameter. The user must be authenticated to access the affected parameter. A successful exploit could allow the attacker to execute commands with root privileges. This vulnerability affects Cisco devices running Cisco IOS XE Software Release 16.2.1, if the HTTP Server feature is enabled for the device. The newly redesigned, web-based administration interface was introduced in the Denali 16.2 Release of Cisco IOS XE Software. The web-based administration interface in earlier releases of Cisco IOS XE Software is not affected by this vulnerability. Cisco Bug IDs: CSCuy83069. |
| A vulnerability in the Layer 2 Tunneling Protocol (L2TP) parsing function of Cisco IOS (12.0 through 12.4 and 15.0 through 15.6) and Cisco IOS XE (3.1 through 3.18) could allow an unauthenticated, remote attacker to cause an affected device to reload. The vulnerability is due to insufficient validation of L2TP packets. An attacker could exploit this vulnerability by sending a crafted L2TP packet to an affected device. A successful exploit could allow the attacker to cause the affected device to reload, resulting in a denial of service (DoS) condition. This vulnerability affects Cisco devices that are running a vulnerable release of Cisco IOS or Cisco IOS XE Software if the L2TP feature is enabled for the device and the device is configured as an L2TP Version 2 (L2TPv2) or L2TP Version 3 (L2TPv3) endpoint. By default, the L2TP feature is not enabled. Cisco Bug IDs: CSCuy82078. |
| A vulnerability in the web user interface of Cisco IOS XE 3.1 through 3.17 could allow an unauthenticated, remote attacker to cause an affected device to reload. The vulnerability is due to insufficient resource handling by the affected software when the web user interface is under a high load. An attacker could exploit this vulnerability by sending a high number of requests to the web user interface of the affected software. A successful exploit could allow the attacker to cause the affected device to reload, resulting in a denial of service (DoS) condition. To exploit this vulnerability, the attacker must have access to the management interface of the affected software, which is typically connected to a restricted management network. This vulnerability affects Cisco devices that are running a vulnerable release of Cisco IOS XE Software, if the web user interface of the software is enabled. By default, the web user interface is not enabled. Cisco Bug IDs: CSCup70353. |
| A vulnerability in the Data-in-Motion (DMo) process installed with the Cisco IOx application environment could allow an unauthenticated, remote attacker to cause a stack overflow that could allow remote code execution with root privileges in the virtual instance running on an affected device. The vulnerability is due to insufficient bounds checking in the DMo process. An attacker could exploit this vulnerability by sending crafted packets that are forwarded to the DMo process for evaluation. The impacts of a successful exploit are limited to the scope of the virtual instance and do not impact the router that is hosting Cisco IOx. This vulnerability affects the following Cisco 800 Series Industrial Integrated Services Routers: Cisco IR809 and Cisco IR829. Cisco IOx Releases 1.0.0.0 and 1.1.0.0 are vulnerable. Cisco Bug IDs: CSCuy52330. |
| A Directory Traversal vulnerability in the web framework code of the Cisco application-hosting framework (CAF) component of the Cisco IOx application environment could allow an unauthenticated, remote attacker to read any file from the CAF in the virtual instance running on the affected device. The vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by submitting crafted requests to the CAF web interface. The impacts of a successful exploit are limited to the scope of the virtual instance and do not impact the router that is hosting Cisco IOx. Cisco IOx Releases 1.0.0.0 and 1.1.0.0 are vulnerable. Cisco Bug IDs: CSCuy52302. |
| A vulnerability in the Autonomic Networking Infrastructure (ANI) feature of Cisco IOS Software (15.4 through 15.6) and Cisco IOS XE Software (3.7 through 3.18, and 16) could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition. The vulnerability is due to incomplete input validation on certain crafted packets. An attacker could exploit this vulnerability by sending a crafted IPv6 packet to a device that is running a Cisco IOS Software or Cisco IOS XE Software release that supports the ANI feature. A device must meet two conditions to be affected by this vulnerability: (1) the device must be running a version of Cisco IOS Software or Cisco IOS XE Software that supports ANI (regardless of whether ANI is configured); and (2) the device must have a reachable IPv6 interface. An exploit could allow the attacker to cause the affected device to reload. Cisco Bug IDs: CSCvc42729. |
| A vulnerability in the Autonomic Networking Infrastructure (ANI) registrar feature of Cisco IOS Software (possibly 15.2 through 15.6) and Cisco IOS XE Software (possibly 3.7 through 3.18, and 16) could allow an unauthenticated, adjacent attacker to cause a denial of service (DoS) condition. The vulnerability is due to incomplete input validation on certain crafted packets. An attacker could exploit this vulnerability by sending a crafted autonomic network channel discovery packet to a device that has all the following characteristics: (1) running a Cisco IOS Software or Cisco IOS XE Software release that supports the ANI feature; (2) configured as an autonomic registrar; (3) has a whitelist configured. An exploit could allow the attacker to cause the affected device to reload. Note: Autonomic networking should be configured with a whitelist. Do not remove the whitelist as a workaround. Cisco Bug IDs: CSCvc42717. |
| A vulnerability in the web interface of the Cisco Secure Access Control System (ACS) could allow an unauthenticated, remote attacker to disclose sensitive information. More Information: CSCvc04854. Known Affected Releases: 5.8(2.5). |
| An XML External Entity vulnerability in the web-based user interface of the Cisco Secure Access Control System (ACS) could allow an unauthenticated, remote attacker to have read access to part of the information stored in the affected system. More Information: CSCvc04845. Known Affected Releases: 5.8(2.5). |
